Value for IDoc Segment field SEGMENT

Hello,
In the Integration Repository, while creating Message Mapping between a flat file (inbound) & an IDoc (outbound), I'm getting an error that not all target fields are mapped. In the target structure (IDoc), each segment has a field named SEGMENT. Can someone please tell me what value should go here. These are not part of the IDoc but seem to be a requirement in XI message mapping.
There is also a segment called BEGIN (Type - xsd:string) which is defined as required. Please write as to what should be populated in this segment.
Any help is greatly appreciated.
Thanx in advance.
Homiar.

My current scenario is
File Adapter -
> XI -
> SAP R/3 (Idoc Adapter).
I will be using FIDCPP2 IDOC.
1. For an instance following is the structure, in this case how can I achieve getting a set of data in one IDOC and another set in other IDOC based on document no.
CC        Doc No.        line items
UK01         456                 1
UK01         456                 2 -
> IDOC 1
UK03         456                 3
UK04         450                 1
UK04         450                 2 -
> IDOC 2
UK04         450                 3
i). Is there any way to create instances of idocs in XI or any alternative way out.
ii). Where/ how can I give the condition, that based on Document No. should create another IDOC instance.

Similar Messages

What is the initial value for a numeric field ??

Can someone tell me what the INITIAL VALUE FOR A NUMERIC FIELD is ?? Thank you
Rod.

Using the following...
   class MyClass
     int myvar1; // Default initial value
     int myvar2 = 3; // Default initial value and default value
     MyOtherClass myclass1; // Default initial value
     void doit()
       int mylocal1; // No value
       MyOtherClass myclass2; // No value
All number member variables, like myvar1 start off with andefault initial value which is zero. For booleans this is false. Object reference variables, like myclass1, have a null value.
All local numeric variables are considered undefined. So mylocal1 and myclass2 are undefined. Before you can use them you must explicitly provide a value.
Finally note that myvar2 will have two values during class instantiation. Initially it will have a value of zero. Sometime later it will have the value of 3. (When that happens is very definitely outside the scope of what this forum covers. If you want to know then ask in the advanced forum.)

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, but its not a range which has two fields . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

"You must specify a value for this required field" in SharePoint list

HI All,
I have a couple of taxonomy fields in my content type. When I try to add a new item with my content type and save, I'm getting an error message "You must specify a value for this required field" against each taxonomy field. I'm not sure what am
I missing. I deleted the content type and added that again to my list but still no luck. Can someone please help me out? Thanks.
Regards,
SC Vinod

hi
it depends how you updated existing field. We faced with the problem that update of taxonomy site column was not propagated to the lists. In Sharepoint when content type is bound to the list, new hidden content type is created for that list - you may check
it if will enumerate
SPList.ContentTypes property. And when you try to update site column changes may not be propagated to these list content types. In order to update it you need to get reference on a field from list content type and update if explicitly.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

How to populate values for a new field in target infoprovider

Hi Experts,
am new to BI. i would like to know on how to populate values for a new field in the target cube with start rotuine.In my case, i have a source infoprovider, which has 3 fields and a target infoprovider, which has 5 fields. i need to populate the new 2 fields in start routine. i dont want to populate using Field routine and am using 3.5 version. please assist with code on how to solve this issue.
Thank you,
Chitra.
Edited by: Chitra_BI on Jun 13, 2011 10:23 AM

Debug the standard code and see where the other fields are getting update. you can use the similar approach and area to code for the new field.
Regards,
Lalit Mohan Gupta.

How to get the value for the LIT_Withheld field in the city tax form?

I am trying to get the value for the LIT_Withheld field on the city tax form , PAYUSEET.. This is not a database column but is generated based on some conditions.. Appreciate the help. Thanks, Suguna

Hi Abhmanyu,
Thanks for your response.
Search Help Name : ZZ_MG_MARITAL_VH
Selection Method : T502T
Search help parameters are SPRSL, FAMST, FTEXT,
Can u provide me a sample code to fetch the value of corresponding text.
Thanks,
Hari

Maintaing a default value for a particular field in the selection screen

Hi all,
How to maintain a default value for a particular field in the Selection Screen of a Standard report
Regards
Ajay

>
ajay babu wrote:
> Hi all,
>
> How to maintain a default value for a particular field in the Selection Screen of a Standard report
>
> Regards
> Ajay
Create a variant for your standard program and assign this variant to the field 'Start with variant' while creating transaction code for the standard program in the transaction 'SE93'.
Regards
Rajesh.

Can we give more than one value for an Authorization field in Auth-Check.

Hi all,
Can we give more than one value for an Authorization field in Auth-Check.
Ex: AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD <Value 1> <Value 2> <Value 3>.
IF SY-SUBRC 0.
MESSAGE E...
ENDIF.
If yes, please help me with exact syntax.
Think it will be like
ID 'CUSTTYPE' FIELD: <Value 1>, <Value 2>, <Value 3>.

Hi,
yes we can give more than one field.
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
 ID <authority field 1> FIELD <field value 1>.
 ID <authority field 2> FIELD <field value 2>.
 ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
please reward points, if it is useful.
satish.

How to use JavaScript to supply a value for a MessageTextInput field

With the text attribute you can supply a deafult value for text field. Is it possible to supply this field with a default value determined by javascript ?
<messageTextInput name="startDate" text="..." ...

Marcel,
If you want to dynamically set a value for a text field, there are two approaches you can use:
1. use javascript (the browser language) and then for your <body> element's onload handler, invoke a javascript method that sets your form value.
2. use java (the compiled language) and databind the "text" attribute of messageTextInput to a dataobject that gives the current date. If all you're looking to do is bind to the current date, I'd recommend this approach.
Hope this helps,
Ryan

Setting values for non-displayed fields on a Tabular Form

I'm having a problem setting non-displayed fields on the same table as displayed fields like last_update_date, last_updated_by, id's and other fields when creating new records or updating existing records in a Tabular form.
What is the best and easiest way to set these values without using database triggers?

Hi Jes,
I'm a little reluctant to use database triggers as I used this product a couple of years ago and I'm fairly sure I handled this problem in HTML DB without the use of triggers. I am therefore I'm getting a touch frustrated that I can't remember how to do it now !!
Do you know of any way of setting values for non-displayed fields on a Tabular Form without using database triggers?
Also, you seem to be suggesting that database triggers is the best way to do this?
Thanks

Default value for selection screen field

Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
Rahul

Hi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya

Can not update Term value for metadata columm field to empty

Hi ,
I have created a TermSet for Sitecollection and created Managed metadata column called Delivery linked with the Term (onsite , online, etc..) in the Term set . If i try to update the Term Value for Metadata Colum field to
blank ( e.g remove onsite so it has blank value) then click Save , it does not save the blank value it reverts back to the original value set for that metadata field. The metadata column is set "not to require to contain information"
& do not force unique value
Any idea
Thanks
mp

Hi,
I understand that you want to change a metadata column to be blank. I cannot reproduce your issue. I can set the managed metadata column to blank as expected. Can you reproduce this issue with another managed metadata column? Or does this happen to the only
managed metadata column?
Here are my steps to achieve this:
Open the root site of the site collection in browser.
Click Site Actions> Site Settings. Click Term Store Management under Site Administration.
Created the term store. Then create a managed metadata column to use this term store(have tested this column with both list and library).
Set "not to require to contain information" & do not force unique value &Allow fill in value& Don’t specify a default value.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

How do I set a NULL value for the parameter field

Hi
I've another question. I'm going to set single values for parameter fields.
// e.g. set today for StartDate parameter field
fc.setCurrentValue("", "StartDate", new Date());
It should be possible to set a NULL value for date parameter fields.
fc.setCurrentValue("", "StartDate", (Date)null);
But this do not work. How do I set a NULL value correctly?
Thank you in advance.
Best regards,
Thomas

First question - is it a stored procedure parameter?
You can't set a regular parameter field value to a null value.
There was an issue with old version of the JRC, where it was allowing null to go through, but had unexpected behavior at times.
Sincerely,
Ted Ueda

Uploading values for an image field in a web app. Nothing displays in layout.

I've uploaded the values (using the import) for a field defined as an image in a web app. When I try to display the field, nothing shows up. The value correctly shows up when I look at Web App items after the upload / import. I've uploaded the same value in a text field, just to learn what was happening, and the text field displays the image just fine when added to the layout.
I would like to use the image field type, as it's easier to correctly create the link when the web app is updated in the future.
Here is what works in the layout: <a href="{tag_link to page}"> <img alt="" class="column66_award_thumb" id="thx" src="{tag_image thumb}" /></a>
Note that {tag_image thumb} is a text field with the link stored in it. The value for each Web App Item which populates this field is a link to the image. (i.e. /Awards/139.jpg)
Here is what I want to work: <a href="{tag_link to page}"> <img alt="" class="column66_award_thumb" id="thx" src="{tag_thumbnail image_value}" /></a> , where {tag_thumbnail image_value} refers to a field defined as an image in the web app. It has the exact same value as {tag_image thumb}. I just copied the field values in the Excel spreadsheet (saved as .csv) when I uploaded it.
It looks like the image field works fine only when I manually create it in the web app. If this is the case, using the upload capability disables any ability to use the image field type.
Is there a workaround for this? Am I missing something?
The page I'm working on is http://www.e-a-a.com/awards When you view the source, you can see that the small thumbnail images are displaying just fine. (I'm using the text field). Whenever I substitute the image field name {tag_thumbnail image}, {tag_thumbnail image_nolink}, or {tag_thumbnail image_value}, the src value is always null.
How do I fix?

Hi there,
To do it properly you need to resize the image. Prefably before you put it into BC. While you can for scale the image in CSS you do not want to do this. Why? Because the images are still very big and likely not optimised as they should be for the web.
This means the page with these images will take a very long time to load for people, and people wont be to happy about that viewing your site.
You need to use software such as photoshop if you have it or iphoto on a mac for example to edit, crop and size images before you upload them. If you do not have anything you can use free web based tools such as this one:
http://pixlr.com/editor/
You can also do this within BC itself in the file manager. If you click the image you can see options to resize it. The downside of that is that is done by pure math. It does not know what is in the photo and the results can make the image look squished etc.

Modify default value for static parameter field programmatically

Hi,
I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
I was even able to modify the default values for the parameters, which are used for scheduling of each report.
But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
This is what I have tried so far:
Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
Any help will be appreciated.
It would be great to know if someone of you has already implemented successfully such a use-case.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PM

Hi,
For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
- Bhushan

Safara 5.1.5 pass old value for a hidden field with new values

Hi
I have the JSP pages which used to be working in Safra 5.1.3. There is a hidden field: mac, submitted to and from this JSP page.
Page A submits "mac" with value1, backend a java action received this value and change it to value2 after some calculation, value2 is set to page B. I can see the hidden field "mac" contains value2 in page B. But when I submit page B, the value being transmitted is still value1.
I tested to change this field to a visible text field rather a hidden one. The value being passed will be the correct one: value2.
Other browsers except Safari 5.1.5 do not have such strange behavior.
Is there any solution for this problem apart from changing my form filed names?
Thanks.

you can only list what was stored.
changes in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
change history for classification is only stored if you activated this.
maybe it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system

Value for IDoc Segment field SEGMENT

Similar Messages

Maybe you are looking for