Value Gets Cleared Automatically...

Hi All,
While creating the package,if I am entering the value for property 2 to customize the input prompt and save ,it gets cleared automatically. I dont know why, it was working fine before i am trying to customize it, nw i cannot go back too..
Please help me out in this...
Thanks in Advance...
Regards,
G.Vijaya Kumar.

I could replicate this issue. This happens when SP of your BPC client is not compatible with SP of your BPC server. when I used BPC client with SP2 with a BPC server of SP3, the packages would disppear but if I use BPC client with SP3 with BPC server of SP3, it works fine. Please uninstall your existing BPC client and install BPC client for from the client software link of your BPC landing page. Please don;t install the new BPC client on the top of your existing BPC client.
Regards
Pravin

Similar Messages

Open Item not getting Cleared automatically

Dear Sir,
For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
Our business scenario is as below :
After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
Regards
B Mittal
Regar

PO number cannot be taken as sort feild hence the value is in blank always.
You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
reward if useful
sarma

WCS:- WLC Alarm not getting cleared automatically on WCS

ALarm TAB:-
==========
Severity: Message:
Critical ------------------------------Port 2 is down on Controller.
This Alarm is not getting cleared automatically, Where as the alarms generated for AP's are getting cleared, I would like to know is this the default behaviour or we need to look into some thing here. To clear this i need to manually delete the alarm.
Any help would be greatly appriciated.

Alarms are automatically cleared after 7 days. Clear the alarms manually if you want to clear the alarms before 7 days. For more information refer http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#qa11.

Meta data values getting cleared from a document

Hi,
I am having a document library with some word(.docx) documents which has quick parts in the documents. The meta data are displayed in the quick part. When the document is downloaded to desktop and uploaded to another document libray the meta data in
quick parts is getting cleared.I need to retain the data in the quick part. I came to know that by using site columns we can solve this issue. But as we cant change the existing sharepoint site it is not possible to use site columns. Can anybody help
me on this?
Thanks in Advance.
Rahul.

Hi Rahul,
Did you add the Managed Metadata column value to the document through the quick parts?
Per my test, if I downloaded and uploaded the document to another library, then the values of the managed metadata column added through the quick parts in the document were not cleared.
I recommend to check if there are same fields added in the quick parts in the two libraries and the field does not contain data in the other library for the document, so the value is cleared.
Could you please provide more details about the two library and the content type used?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

WD Enumerated Dropdown Value Getting cleared in Adobe PDF After submit

We have created a PDF adobe form using the webdynpro Abap in which we are using the Enumarated Drop Down list with the no select value. The Values are populating in the dropdown correctly and we are able to select the particular value from the dropdown.But when we submit the adobe form with the submit button to send it as an attachement in the workflow then the selected value of the dropdown gets cleared in the attachment. Is there any way to avoid that.
I have searched the forum for the same, but couldnt find appropriate solution. Please help.

Hi Sourabh,
I having the same issue with my form right now. We are in EHP5. Did you manage to find any solution for this? Can you please share? Appreciate it.
Thanks,
Praveen

Infopackage-Data Selection Tab Values Get Populated Automatically.

Hi All,
In infopackage dataselection tab currently we are entering manually values for 0version info object and process has to be done for 4 differenct infopackagewe are getting a ticket for doing this process for every month.So 0version values would not be unique values ,all the values are different,for instancec10,c99,c11.
user community felt that this one is a time consuming take they want to customize it and they want to enter the value on their own thorug some custom sap screen.
we cannot give access to the user for the infopackage selection and all .we have figured out like we have to create a custom t code and give acces to the user for that t code alone.
If the user enter the 0version value in the front end of it should get reflected in infopackage dataselection tab.
It would be really grateful if u have shared ur thought on the same.
Regards,
Sakthivel S

Hi,
You could use the TVARVC table instead of creating a Z-control table, and allow the users to enter the data into TVARVC via the tcode you are creating.
So for instance the table entries could be as follows.
NAME
SIGN
OPT
LOW
HIGH
IP_1
I
EQ
V1
IP_2
I
BT
V3
V4
IP_3
I
EQ
V9
Now, in the first InfoPackage, write the ABAP routine to read the data from TVARVC where the NAME = IP_1. Based on the results the InfoPackage restrictions will be populated by the routine.
In the second InfoPackage you read based on NAME = IP_2. And so on. Rest of the routine code is same as in the first InfoPackage.
This way you can be assured that the different IPAKs will not have overlapping criteria as long as the table entries are correctly maintained.
Regards,
Suhas

Process scope values get cleared randomly

Hi,
In my backing bean i pass dynamic values as bind variables to a ViewObject
from the user selection screen form data.
I do this using ValueChangeListener method for each field.
In this method i put the current value in the processScope.
So in the pageDef file i give as:
<NamedData NDName="ContractTypeBind" NDType="java.lang.String"
NDValue="${processScope.contractType}"/>
<NamedData NDName="ContractPseNumberBind" NDType="java.lang.String"
NDValue="${processScope.pseNumber}"/>
After passing values like this, i have placed an LOV in the page so that it will populate dynamic records from the DB based on
the contract type and pse number entered by user.
If i use the LOV button for 3 -4 times randomly the process scope values are getting null.
I mean process scope values are getting lost.
why is this happenig can any one tell?
Thanks,
Sanjaykar

Hi,
I tried without using any valuechange listener and its absolutely working fine.
No need of putting any values in processScope and blah blah!!
I am passing values in backing bean for the ExecuteWithParams this way:
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("ProcurementLOVParams");
Map map = operationBinding.getParamsMap();
map.put("ContractTypeBind", conTypeChoice.getValue().toString());
map.put("ContractPseBind", pseNumber.getValue().toString());
Object result = operationBinding.execute();
And this is working fine..
Thanks,
Sanjaykar

Values getting cleared

Hi All
I have a created a bsp and accessing the same through EP.
When i logon with a particular user id in EP a value is not getting populated in only one field.
The same is working fine for other user id's.
I have not made user specific coding
Regards
MD

Hi Madhan,
For that particular User ID , there is no data in the seeking field in the concerned table. Swap that userID with other and access to the portal, u'll get that field populated.
if yes, then no problem in ur UserID .
else u'll have to check the Authorization Code .

Why does cache automatically gets cleared

since the latest update of my firefox my cache are getting cleared automatically after a 2 to 3 days.... i have read u r earlier post n nothing helps , i have done everything and even re-installed my operating system....all this is happening after installing the latest firefox .... please if you have any real fix that actually helps and not the same old replies , please help ..i can't daily keep waiting for my cache to reload ....

oh and it failed too all my 350 mb of cache is gone now, i play online games daily and this stupid firefox expects me to load daily so much of cache each and every time?????.... i stored cache from firefox profile folder as a backup but everytime i replace it it again auto deletes it.... i should have sticked with google chrome ....never again firefox ...damn

GR/IR Clearing a/c not getting cleared..

Dear All,
My GR/IR clearing account is not getting cleared automatically after Invoice posting..is it the standard behavior or anything
missing?
For example- GR/IR Clearing a/c is 13110100,when GRN is done it is getting credited and once invoice is posted it gets
debited so it should show cleared when we run FS10N / FBL3N
please let me know whether it is needed to clear manually?
Naren

Hi
F.13 is for executing the setting configured under Financial Accounting -> General Ledger Account -> Business Transactions ->Open item clearing - > Prepare Automatic clearing. In this place, the GL account needs to be updated with the relevant criteria like, what are the fields to be matched for clearing like Reference field, assignment, etc.
After that, if F.13 is executed for this GL account then it will clear based on the criteria specified above.
Hope it clarifies
Regards
Lakshmanan Krishnan

Input Field not getting cleared.

Hi Fellow Abapers,
I have a peculiar problem. I have done a Module pool program as below.
PROCESS AFTER INPUT.
CHAIN.
    FIELD ztrsc_histh-trptr.
    MODULE user_command_0100.
ENDCHAIN.
CHAIN.
    FIELD ztrsc_fibld-fidocamt.
    MODULE user_fidocamt ON CHAIN-REQUEST.
ENDCHAIN.
MODULE user_command_0100.
CASE sy-ucomm.
WHEN 'NEXT'.
     CLEAR ztrsc_fibld-fidocamt.
     GET NEXT RECORD AND DISPLAY.
ENDCASE..
ENDMODULE.
Input FIELD ztrsc_histh-trptr is display only after Transporter Code is entered and we press "ENTER" key.
Input FIELD ztrsc_fibld-fidocamt is enabled. I enter some value "10".
i have a button as next. When the next record is shown the next record shows but although I clear FIELD ztrsc_fibld-fidocamt, in the debug mode it clears THE FIELD VALUE ztrsc_fibld-fidocamt AND THEN GETS THE NEXT RECORD AND PUTS THE CORRECT NEXT AMOUNT OF THE NEXT RECORD INTO ztrsc_fibld-fidocamt, but when it appears on the Statement FIELD ztrsc_fibld-fidocamt as per the below code.
CHAIN.
    FIELD ztrsc_fibld-fidocamt.
    MODULE user_fidocamt ON CHAIN-REQUEST.
ENDCHAIN.
the old value of "10" re-appears although I had cleared it in the previous Module program. What could be the reason.
Regards
Yao Chhang

Thanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.

DUMMY_BW (0FI_GL_04) delta queue not getting cleared

Hi,
We're using minute based extraction approach for 0FI_GL_04 and thereby have two delta queues for the 0FI_GL_4 extractor in the SAP ERP ECC system: One for the ‘DUMMY_BW’ and the other for the 'real' BI system. The delta queue for DUMMY_BW is not getting cleared automatically in production system and it keeps on adding more records in the queue which is in turn consuming memory in ARFCSDATA. Any thoughts on this would be really helpful.
Regards,
Karthik

Hi Gurus,
Please help me on how can I check that on what fields 0FI_GL_20 is pulling delta.
I tried to find the MSG Type to check in BD52 for relevant field list, in ROOSGEN table. the entry for MSG type is blank there.
Any help on this is appreciated.
Thanks,
Sourabh Deo

Af:table gets cleared when adding new record in it

Dear All,
I am having a af:table on my page, which has an dropdown. When the value of dd is changed then a record(blank) should be inserted in the same af:table.
Now i have following problem.
When i set row Selection to single, then every thing works fine,
When i set it to none then when i add a row to table(on change of dropdown) then table gets cleared, means only newely added values gets cleared and not the one which are fetched from database.
The reason behind setting row selection to none is that on single selection when ever the user tries to change the value of from other row then it hits server, sometimes it becomes slow also.So for the workaround i need to set autoSubmit="true" to all fields in table but then also whenever user changes the value it hits server.
Please guys can any one give me proper solution...except rowSelection
Thanks,
Santosh
jdeveloper 11.1.1.5.0

Hi Frank,
Thanks for the reply. I can get the correct input component to display on a given row in the table.
The real issue is when a new row is added (via a createInsert operation on a button). The creation of a new row PPRs the table and the input Components are all set the same on any existing rows, irrespective of which component was used to input data.
I'm assuming here that it should be possible to have one row show one component under the column, while another row shows a different input component under the same column..?
Do I need to iterate through the af:table (if possible) when a new row is created to reset the correct input component??
Thanks.

JEXP Type wilth accc seq JEXC in table 372 Value getting captured automa

Hi Friends,
JEXP Type with acc seq JEXC in table 372 Value getting captured automatically.
372 Sales org./Ref.doc./Ref.item
357 Country/Plant/Ctrl cod
End user have put record in 357 table and when executing the sales order the record in being copied in order but once we save the reord the value for JEXP gets automatically captured and saved under 372 table for JEXP.
can any one please throw some light on this????
Reagrds/Ashu

Hi,
Suggest you to check each of the key combination in the condition record and check the validity dates.
If there are condition records for more than one combination, then change the validity dates of all other condition record as old dates and only make the relevant condition records as either valid till current date or in to the future date.
Hope this helps.
Kind Regards
Chakradhar
Edited by: Paturi Chakradhara Rao on Jan 24, 2008 12:15 PM

Assignment Field Get Cleared(blank) During Automatic Payment Run(F110)

Hi all,
We have a senario that during the creation of AP invoice, the Profit Center is entered in Assignment field ( BSEG-ZUONR) in FB01.In the invoice document the assignment field value correctly copied into Profit center (BSEG-PRCTR) based on a subsititution rule.
But during the payment document run (F110) the assignment field is get cleared (Blank).and in REGUP table, the Assignment field get populated correctly.
By displaying the payment document using transaction code FB03, the assingment fields is empty.ie field BSEG-ZUONR is empty. .
We have checked all the subsititution rules defined in the system and none of these causing the problem. We suspect there are some hidden subsititution or configurations in SAP that affect the assignment. We also checked the sort key is not the cause of it.
Have anyone encounter the same scenario why the Assignment field get cleared(blank) in Payment document. Please kindly share.
Regards
Riaz

Hi,
I think you are trying to Run Automatic Payment Programme with Check Management and you want to Print check and payment summary.
Kindly check if you have defined SAP Scripts in FBZP Payment Method in Company Code.Select a Co Code and double click on payment method eg C-Cheque, their is a section called FORM DATA you need to input Scripts for the same so that the Payment Programme prints output as defined in the SAP Script for Checks and payment advice
Regards
Rahul

Value Gets Cleared Automatically...

Similar Messages

Maybe you are looking for