Value getting changed after data loading.

Hi experts,
Two Issues:
1.We have a dso2 populating from another dso1.
In dso2 we have a char X which is populating from two key figures Y and Z through a formula in
transformation such that X = Y/Z.
After loading data when checked in the cube for X for the value 10190 it is showing as 1.019E+04.
What should i do if I want the value to be displayed as 10190 in the cube or query level ?
2.Suppose I am creating a query on a cube.
For a keyfigure i am creating a New selection.I dragged the keyfigure and i am restricting it with a char
say Doc_num.Suppose this doc_num has values 1001,1002,1009 etc.
But I want to restrict with values which are not there in the cube say 1000 to 1010.
1000 and 1010 are not there in the cube. But I want to use them for restrictions in the future purpose.
How can we get these values ?
Regards,
Nishuv.

Hi.....
1.U hav to use Alpha conversions for this.......(Alpha conversion routine in the general tab page of the infoobject X)
Check this......
Re: Alpha conversion
2. It does'nt matter whether the value exists in the cube or not..........bcoz characteristic means master data.......and master data will never contain in the cube........it will be in the infoobject........Extended Star schema concept...........but to give the selection...........u hav to maintain these value in the Master data table.............
Regards,
Debjani.....

Similar Messages

Order Component quantity gets changed after operation confirmation

Order Component quantity gets changed after operation confirmation.
We are using CO27 to issue the Material to the Order.
When we do the confirmation of operation. Component quantity attached to operation get changed.
Any solution for this.

Dear
Please Follow the Steps
1. Go into Co02 there u do production order with qty select the Component overview u find the Materials there please check hhow much is the qty of that particular material
EX: Production order qty for Header Material is 10 ea
then ur Compannets Qty is 10 or 20
depends on the Componet Qty the Operation takes place that is because u have maintatined a base qty in Routing and BOM
With Regards
Pushpalas

Hierarchy not Updated after Data Load

Hello All,
I'm using extractor 0MATERIAL_CDTH_CMHIER to load a hierachy into 0MATERIAL (BW 7.0).
The problem is that when there are changes in nodes of the hierarchy, it´s not being updated by this data load (eventhough the new records are loaded into PSA). I need to delete and recreate the hiearchy to be able to see the new nodes.
Any idea on what could be the cause of this issue?
Thanks in advance,
Cristina.

Hi Cristina,
If you are using a process chain to load the hierarchy, check if you are using a "Save hierarchy" process after the InfoPackage run and before the "Change run" process.
You can find more detailed information at:
http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/content.htm
I hope it helps you.
Regards,
Maximiliano

Error Message after data load (error is "1130610")

We load data using a data load rule. The data seems to load fine except we get the error message "ERROR - 1241101 - Unexpected Essbase error 1130610" on last line below? Any thoughts? Is there a guide somewhere that explains in details all the various error codes and what they refer to? We're using Essbase 6.5.1. Thanks!======================================= OK/INFO - 1003037 - Data Load Updated [364875] cells. OK/INFO - 1003024 - Data Load Elapsed Time : [428.323] seconds. ERROR - 1241101 - Unexpected Essbase error 1130610.=======================================

The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.

Get change document data

How do we get the change document data to be used in a workflow,
I have made entry in swec , there i associated the change object and my zbo delegeted from standard bo and specified the event as "on change". now i want to send a mail using this changed data.
I have two options either i use an exit fm to trigger the mail or use a workflow to trigger tha mail, but how do i use the changed data that i get from cdhdr, i need to specify these fields in tha mail body.
or if i choose to use an exit fm how to do it.
regards,
кu03B1ятu03B9к

Hello,
Create a new background method in the ZBO to get all the required details from CDHDR and CDPOS tables. Export them from the method as separate variables or as an internal table.
Create a task in the workflow to execute this method before the sendmail step. Once the data is exported from the method, it is going to be available in the workflow container and so you can use the same in the SENDMAIL step.
Hope this will help.
Thanks,
Samson

Content getting disappear after page load in safari

Content of the webpage get dissappear after the page load in safari. I am currently using IOS7.1 in my ipad mini
Url:
http://wealthforumezine.net/ThinkBIGBusinessPerspective230314.html#.UzAF2PmSyrM
http://wealthforumezine.net/FundFocusSBI180314.html#.UzAF6fmSyrM
the website is devloped using HTML 4.
Thanks in advance

I have a similar problem in Leopard with Safari not loading pages correctly. I'm trying to troubleshoot now, so let me ask you some questions to see if its the same problem as mine.
Are you using an administrator account? On my machine it only acts up on non-administrator account.
Does Firefox or another web browser load the pages correctly? On my machine it has similar problems to Safari.

Condition value getting changed when open the Sales order in VA02

Hi Experts,
i have creating Sales order manually in VA01, and for first line item of sale order, i have assigned value in custom field of additional tab B, to populate Condition value for condition type ZK01 and checked in VA02, VA03 same Condition value is there for condition type ZK01.
And created delivery document and billing document for newly created Salesorder.
When i have open the Sales order in VA02, then i am getting changed Condition value for conidition type ZK01 in bothe header and first line item and in VA03 there is no change in value.
Kindly let me know the user exit or any related programs to this issue.Thanks in Advance.

Hi Rajani,
this sound like VOFM -> conditions. Do you know which conditions are active during the determination?
Cheers,
Stefan.

NonAscii Characters after data load

Oracle 10g R2 and HPUX - Excell 2007.
I am loading one table of data from Microsoft Excell to SQL Server 2008 and then to from SQL Server 2008 to Oracle 10g R2 database.
I am accomplishing the above task using SSIS package(ETL tool).
When I point SSIS package to the production database(Oracle database) the few data in few colums has non ascii characters.
When the same SSIS package is pointed to the test Oracle database there is no data issue. Oracle test and production databases are on two different boxes. Why the same Excell data and SSIS package is not working on production box? Is there any initial parameters affects this data load? Or any code base I have to change?
Thank you for your help.
smith

The OS on both boxes are the same.
HP-UX B.11.11 U (64). When I look at the patch level there are more than 100 files to compare.
select * from NLS_DATABASE_PARAMETERS;
Running the above query resulted in 20 rows as output.
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     WE8ISO8859P1
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_RDBMS_VERSION     10.2.0.2.0
The above query result is same bit by bit on production and test box.
Is the load process exactly the same ?
I just change the connection point in SSIS to point to production database. Also the table structure (data types, etc what I can see through SQL Developer) in production and test datasbe are same.
What else be the reason for this?
Smith

Selected item getting changed after paging in paged datagrid

I have a paged datagrid. It contains two drop downs. Once i clicked for pageing, the previously selected item getting changed. Please give me solution to solve this problem.
Thanks & Regards
kvpdy

I put the dropdown in item renderer and the selected item is based on the database value. How can we store that and reapply in paging ?
Pls give me solution....

VKM1/2/3/4, what data will get changed after these transaction?

Hi all expert,
now i have 4 Tcode, VKM1/2/3/4, can i know what these Tcode used for? what is the difference??
and, inside these Tcode can release, reassign, reject, forward, and forward to authorizaton, what are these?
If I select one of the SO from the list, then click on...mayb forward to authorization and save, what field will be changed? (how if i click release and save? reject and save? forward and save? reassign and save??)
becos now i need to do sth in the userexit, that when user do sth in these tcode, then click save, i will stop at the middle and check what is the diff between the data in database and the changes the user made, so i need to know what effect when i perform those action(release, reassign, reject, forward, authorization) in those Tcode(VKM1/2/3/4). realy appreaciate if u can help...
Thanks.
Best Regards,
JL

Hello JL,
VKM1 provides you with the list of credit blocked sales documents, VKM2 - with already released documents, in VKM3 you can enter any sales order number (independent from the credit status), in the VKM5 you can enter any delivery number and VKM4 provides with a list of the documents according your selection criteria.
In all these transactions you can: 1. release the sales document - (select SO, release and save). The credit status will be changed to D (released), the ATP will be done and you get the confirmed quantity and so on).
2. Reject - the sales order will be rejected and saved - the same as if you go into VA02 and reject the order manually 3. forward - the sales order will be forwarded to another credit representative for releasing 4. forward to authorization - if the sales order is covered by the credit card, the system executes a new authorization (if necessary) and saves the sales order.
I hope this information helps you.
Best regards,
Lela

BI-IP To track the planning changes after Data Locking

Hi All,
Need your help to design solution for one critical user requirement in IP.
We all know that in CC Planning, every month after certain date we lock the planning tool and freeze the data. But on exceptional basis, we might require to unlock planning tool to allow users to do some changes in planning data.
User wants to track these changes and report it out. Is there any standard functionality that SAP-IP has provided to track these kind of changes? If not what is the best way to achieve this?
Appreciate any input regarding this ! Thanks a lot!
Som

Hi,
You need to have additional characteristics for User & Date in your RTP to record who changed when and what plan record.
Then you can create a characteristic relationship of type 'Exit Class' to derive User Id(last changed by) and the date(last modified).
Itu2019s not necessary to include User-ID and Date in any of the aggregation levels, but the Source Characteristic(Company code may be in your case) based on which the values are derived for User-ID & Date, must be present in each aggregation level.
Then create a custom class say ZCL_LOC_CR_LINE_ITEM by taking class CL_RSPLS_CR_EXIT_BASE as super class and then redefine the method DERIVE of interface IF_RSPLS_CR_METHODS in your class.
You can write following code in your method DERIVE:
CLEAR e_t_mesg.
FIELD-SYMBOLS: <l_chavl> TYPE ANY.
ASSIGN COMPONENT '/BIC/ZUSERID' OF STRUCTURE c_s_chas TO <l_chavl>.
<l_chavl> = sy-uname.
ASSIGN COMPONENT '0DATE' OF STRUCTURE c_s_chas TO <l_chavl>.
<l_chavl> = sy-datlo.
This will solve your purpose.
Regards,
Deepti

How to remove empty line in BW after data load

Hello Experts,
From standard SAP contents, I am loading Master Data (E-Recruiting) from R3 to BW. The thing is after loading to BW when I check the data, maximum of the MD tables shows all the data but first line is blank. Sometime it shows only date on first line and other fields empty. I don't want to keep the first line blank or only date. How to fix it or what to look / what are all the possibilities?
Thanks in advance.
Regards,
Ashok
Message was edited by:
Ashok Saha

Hi,
there will always be one initial record (also the keyfields initial). You cannot avoid this. This record is used for the join from infoprovider to infoobject in case there is no value posted to the infoobject in the cube.
kind regards
Siggi

Condition Type - Values getting changed at billing

Hii All
I have a header condition which is set up as group condition at header level. When an amount is entered at the header level it gets proportionately distributed among the line items. This is fine.
Problem comes when a line item is completely shorted (i.e. delivery quantity becomes 0) then in the billing the header condition value also get reduced.
What setting needs to be done so that the header condition value does not get affected.
Current setting of condition type is as follows:
Condition Class: A
Calculation Type: B
Condition Category: Blank
Copy Control from delivery to billing is marked as 'G'
Pls do let me know if there is a feasible solution for the same.
Many Thanks
Gaurav Manocha

Dear customer,
What you are experiencing with Fixed Amount Header conditions is stand-
ard behaviour. Please see below Notes:
876617 FAQ: Header conditions / Header condition screen
317112 Behavior of conditions w/ calculation rule B changed
485740 Conditions with fixed amount in copy activities
To achieve what you wish (absolute amount), solution is in the below
Notes:
84605 Transfer absolute amount condition to billing doc.
25020 Value changes during over/underdelivery
25144 Freight conditions during milestone billing
But I guess that there are many threads with the same problem.
At first please search for old threads and solutions.
I hope that the information are helpful.
regards
Claudia

Partititon1,2,3 in group ODS,FAC status not change after data redistribute

Hello,
first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
i have made a redistribute action like this
1. double click what i want to distribute
2. select the relevant partition , for example partition 0001
3 click the execute immediatelly button .
when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
the log message is
Data Redistribution cannot be continued.
Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
the SQL 6047 detail information is like the following. I don't know what happens.
it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
db2 => ? sql6047
SQL6047N Database partition group cannot be redistributed
because table "<name>" does not have a partitioning
key.
Explanation:
At least one table in the single-node database partition does not
have a partitioning key. All tables in the single-node database
must have a partitioning key before the database partition group
can be redistributed to a multiple-node database partition
group.
The operation was not performed.
User Response:
Use the ALTER TABLE command to specify partitioning keys for
tables that do not have one. Then try the request again

Before redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
select varchar(tabname,30)
from syscat.tables a
where tbspace='<your_tablespace>'
and not exists (select partkeyseq from syscat.columns b
where a.tabschema=b.tabschema and a.tabname=b.tabname
and b.partkeyseq > 0)
Brigitte

Values getting changed as if by reference

I have a situation where the values in the object is changed when its not supposed to
Here is the sample of my code
WOWSurvey newPrevSur = new WOWSurvey(); // i have defined newPrevSur
newPrevSur.setDocumentTypeCode("xxxxxxx"); // I am setting an attribute
WOWSurvey survey = (WOWSurvey) result.getReturnedObj();
newPrevSur = (WOWSurvey) result.getReturnedObj();
if ((survey instanceof WOWSurvey) && (newPrevSur instanceof WOWSurvey))
System.out.println("survey is instance of WOWSurvey"); //this is true
wowSurveyUpdateBean.setWowSurvey( survey );
wowSurveyUpdateBean.setPrevSurvey( newPrevSur );
newPrevSur.setDocumentTypeCode("yyyyyy");
The moment the final statment is executed, the value "yyyyy" is changed in both newPrevSur, survey and wowSurveyUpdateBean survey( set by setWowSurvey method ), prevSurvey(set by setPrevSurvey method )
Is there anything I am missing in this ?
If you find some of this statments redundant or meaningless, I have added them to show its behaviour.
I am using VAJ3.5 and WTE
Please help. Thanks in advance
lareds

public String rotatel(s,n){
if(n=0) return s;
s=subString(1)+s.charAt(0);
rotatel(s,n-1)
I think this program is wrong for what my professor says it does. It needs to be recursive and that it is, but I cant see where it takes a word like hello and prints elloh
llohe
lohel
ohell
Get the point. I dont think my teacher did this problem correctly or either im not gettin it.I feel stupid.
I also need to print the multiples of m up to (m*n) using recursion.
I can do all this but someone give me some confidence that im doin it right.

Value getting changed after data loading.

Similar Messages

Maybe you are looking for