Value help based on this object not supported.
Hi,
I am new to VC, i want to create search help for a field create by own. it is "z_date" and restricted by "0REDAY1".
when i click on "Add Value Help" and proceed further it gives me an error stating " value help based on this object is not supported"
Thnaks,
Sonali.
Hello
I believe the common mistake made here is that you are trying to create value help under the "VARIABLE" drop down . you can only create value help on the "CHARATERICTICS" .
so to solve you problem please identify the INFOOBJECT associated with that variable and create value help on that.
if this doesnt help please let me know
Similar Messages
-
Row based Target only mode not supported
when i try to execute a mapping i am getting the following error
Row based Target only mode not supported
what can be the reasons for thisHello Michael
Check if you have a procedure (other than pre or post mapping) in your mapping. Every part of a mapping after a procedure can only be generated in row-based mode.
Hope this helps
Mate -
PlayBook "This item not supported by your current device profile"
Hi I bought Blackberry Playbook before 1 week I update os and when i try to install any app like skype, viber, wechatt etc there is no download option.
when i open that aap in blackberry app world there is written "This item not supported by your current device profile" I am worry about it can some one help me please about it.
I am located in Dubai.
waiting for reply...
ThanksSkype is BB10 only, Playbook is on 2.1.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
How do I get my Ipod to play music videos through my theatre system? I keep getting the message "This device not supported". My theatre system WILL recognise my Iphone however. The theatre system, Ipod, and Iphone are all less than 4 months old. Any suggestions welcome!
Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.
-
I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?
Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it -
i cannot copy and paste from a document into an email body and a pop up says this feature not supported by your browser
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Check and tell if its working. -
"This accessory not supported" in car
2012 Nissan Xterra - plugged in phone to listen to music and recieved "This accessory not supported". What do i do?
Check the pins on the car kit are clean and not damaged.
Also check phone connectionnport again for FUD or minor damage. -
This Accessory Not Supported: HDMI Adapter on iPad2
When I attach my Digital AV (HDMI) adapter to my iPad, an error message appears saying "This Accessory Not Supported". Is there a problem with the adapter? Or with my iPad.
For the 4G
Try:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For the iPhone, try another cable. -
HI I HAVE AUTHORIZATION 5 SYSTEM AND NOW IM NOT HAVING THAT 5 SYSTEM NOW IM NOT ABALE TO AUTHORIZATION MY SYSTEM ITS SHOWING U HAVE AUTHORIZATION 5 SYSTEM AND I DON’T HAVE THAT 5 SYSTEM PLS CAN U HELP ME IN THIS IM NOT ABLE TO DOWNLODE ANY THING PLS DO THE NEED FULL
When you post again, don't do it in caps.
They are considered shouting and are much more difficult to read.
Allan -
Why does phone say "this device not supported" when charging
why does phone say "this device not supported" when charging?
If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.
-
Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?
That's because part of iOS7 had code in it to look for and recognize unsigned cables.
In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it. -
This device not supported on my new(ipad3 ?) ipad?
But it is!
I have a Apple device that plugs into my ipad/s and outputs a HDMI signal to my 32" monitor.
I bought it for my iPad 2. When using it on my iPad 3 or (whatever you want to call it) I get a msg.
This Accessory Not Supported, I then touch OK and the HDMI works and it charges at the same
time.
Bug?Try cleaning your dock connector.
-
My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
This Accessory Not Supported by iPod Touch---Philips Dock
When I connect my iPod touch to my Philips dock, a window saying "This Accessory Not Supported by iPod Touch." The dock will no longer charge nor play music. It only started happening after the latest update.
For the 4G
Try:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For the iPhone, try another cable. -
"Deep data objects not supported" when writing into a file
Hello everybody,
I am having some issues about a program that i made which puts the content of any table in a file that i created.
The problem is when my table (transparent table) has a deep data type in it (example : a string field, so with undefined length).
Here is my code :
DATA : lt_gentable TYPE REF TO data.
DATA : ls_gentable TYPE REF TO data.
FIELD-SYMBOLS : <ft_lines> TYPE STANDARD TABLE.
FIELD-SYMBOLS : <fs_line> TYPE ANY.
CREATE DATA lt_gentable TYPE TABLE OF (p_tab).
CREATE DATA ls_gentable TYPE (p_tab).
"creation of links
ASSIGN ls_gentable->* TO <fs_line>.
ASSIGN lt_gentable->* TO <ft_lines>.
DATA : l_fname TYPE char80.
CONCATENATE '\dir\dir2\' l_fname_log INTO l_fname.
OPEN DATASET l_fname FOR OUTPUT IN BINARY MODE.
OPEN CURSOR WITH HOLD l_c FOR SELECT * FROM (p_tab).
DO.
FETCH NEXT CURSOR l_c INTO TABLE <ft_lines> PACKAGE SIZE p_size.
IF sy-subrc = 0.
LOOP AT <ft_lines> INTO <fs_line>.
TRANSFER <fs_line> TO l_fname. <=====> GOES INTO DUMP BECAUSE MY TABLE (p_tab) has a string field
ENDLOOP.
CLEAR <ft_lines>.
ELSE.
CLOSE CURSOR l_c.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET l_fname.
Here is the message i am getting :
At the statement
"TRANSFER f TO ..."
no deep data objects are supported at the a
for strings.
Elementary deep data types are internal tabl
data object) references and strings (STRING,
General deep data objects are elementary dee
that contain deep data objects.
In this particular case, the operand "f" has
internal identification "v".
List of internal ABAP types:
C Text (Character)
N Numerical text
D Date (YYYYMMDD)
T Time (HHMMSS)
X Hexadecimal
I Integer
P Packed number
F Floating point number
h Internal table
r Object reference
l Data reference
g String of type C
y String of type X
s 2-byte integer with plus/minus sign
b 1-byte integer without plus/minus sig
u Structure (flat structure)
v Structure (deep structure)
Can you help me to go through this issue ?
Any kind of help would be appreciated.
ChristianSandra is correct I agree with him,
TRANSFER dobj TO dset [LENGTH len]
[NO END OF LINE].
dobj must be character-type . Use String.
Please read the F1 help for the TRANSFER Statement and also please check the example
In your case assign the <fs> to Casting File asfollows
DATA: file TYPE string VALUE `flights.dat`,
wa TYPE spfli.
FIELD-SYMBOLS TYPE x.
ASSIGN wa TO CASTING.
TRANSFER TO file.
Hope this helps...
Maybe you are looking for
-
Time capsule and external hardrive
can I attach an external hard drive to time capsule to expand storage? If so, are there any downsides?
-
Hi, I have one question. Im trying to find some pictures from a family birthday two years ago. iCloud has been activated for a long time and I remember randomly finding my lost pictures from my iPhone 5, that got stolen a year back, in iPhoto. Back t
-
Can I play and save the incoming RTP streams simultenously
Hi, I want to whether i can play and save the incoming RTP stream simultenously using JMF 2.1. The idea is by saving in the file, i can playback the same file later time Is there any example code aviliable. Thanks in Advance bye Srikanth
-
Adding fields using forms personalization
Hi All, Is it possible to add the fields to a form using forms personalization. Thanks and Regards, Zaheer.
-
Hello, I have the following code:boolean kill = false; public void go() { while (!kill) { sleep(3000); //do stuff. public void stopThread() { kill = true; }This code doesn't stop it. I cannot seem to stop this thread with the b