Value help not displayed on some workstations

Hello everybody!
Our WebDynpro application (migrated to NW 7.3 some months ago) implements some value helps (evs) on input fields by modifying the context attributes SimpleValueSet. This functionality has been working without any problems for some years. But now the value selectors show up as usual on some workstations, but on some workstations the value selectors are no longer shown and the input field validation does no longer work which leads to some nasty errors in our application. On first sight, there does not seem to be any difference in the used browser (IE 9 or Chrome 35) or operating system.
Did anyone come across this problem ? Any help is appreciated.
Thanks
Michael

O.k., for some reason this problem disappeared although we changed nothing... So I'll repost if it occurs again.
Thanks
Michael

Similar Messages

Condition value is not displaying in sales order

Hi Friends,
when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
the condition value is not displaying in cond. value column in conitions tab of sales order.
In analysis it is showing as condition record found...
please help me...
with regards

Hi,
can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
Regards Thomas

Purchase Order Notes not displaying in some systems

Hi All,
Purchase Order Notes are not displayed in some systems. But the same notes are viewable from a different PC.
This is the case of few of my end users.
Please help.
Thanks
Vijay

Hi All,
The issue is resolved. It was because of updating the IE version from 6 to 7.
We have degraded the IE version back to 6 and it all worked fine.
Thanks
Vijay

Service order values posted to WBS, values are not displaying in CJii3

Hi,
We have posted thevalues from service order to wbs.
values are not displaying in cji3.
Regards,

Hi,
If the data has been successfully loaded into BPC, then it should be visible in BPC report.
You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
Hope this helps.

Explorer Measure Values does not display as in BW

I have developed some of the explorer reports based on BW queries. The Measure values display correctly in BW query , but the value is not displayed correctly in explorer if I add multiple dimensions in the Info space
If I add only one dimension Eg:- Calender Year in infospace the result of the explorer matches with the BW query but if I add mor ethat 1 dimesnion , if I have added Region , Country to the infospace and then drill down the result by any of teh dimesion the result does not match
Thanks

Hi Merhan,
Yes, that would probably solve the problem. However I do want the actual <pattern> to be in there to access it in JavaScript.

List of values is not displayed in web inteligence report

I created a web inteligence report and put into my favourite folder. The report consist of a selectable list of values in a prompt but it does not appear in my favourites folder.
The users with administrator rights that copied this report into their own favourites folder are able to see the list of values in the prompt.
It seemed that the list of values does not display in the prompt when non administrator rights opened this report in their own favourites folder.
Anyone can figure out how to set the access rights so that non administrator can see the list of values when the web inteligence report is opened in their own folder.
I am using Business Objects XI 3.1 ..

SOLVED
     CMC -> Connections
-     Right click connection name, Click u201CTools > Check Relationshipu201D
-     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
-     Assign Security for u201CEveryoneu201D
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D
     CMC -> Universes
-     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
-     Under u201CUser Securityu201D, click Everyone and assign security
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

Hello Experts,
I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
I am in confusion where the exact issue will be.
If any body faced this kind of scenario is your project, kindly reply me.
For any more clarifications i will respond you immediately.
Thanks,
SN

Hi,
check aggregates,index etc for cube
check key figure selection as well in Multiprovider for respective Infoprovider
just create test query on Infoprovider and then on Multiprovider and see..
Check RSRT - regenerate the query
also see there are various options like execute+debug has ....just check them
Thanks and regards
Kiran

Variables/Input Parameters Value help not showing texts

Hello,
I have created a crystal report based on a calculation view in Crystal Reports for Enterprise 4.1 SP5, which has a input parameter on the field "Region". For the value help, I am using a custom view based on T005U in which I have made sure that RegionName field is present in the "Label Column" property of the Region field.(Required for viewing descriptions of LOVs).
In the crystal report, while previewing data in the query builder, I am able to see the value help for the input parameter in the prompt screen, which displays only the key part, but does not display the description of it. Moreover, after accepting the prompt value, the preview runs into an error(as shown below). Please note that I get the error below only when Region is a part of the output fields of the query.
Instead of input parameter, when I create a variable on the region field in the main calculation view, with the same value help view, I am able to do data preview in the query builder as also data appears in the report on running the query. But, just as in the case of input parameter value help in the prompt screen, even over here, I am only able to see the key part and not the description.
Are variables/input parameter LOV's supposed to display descriptions or just the key part? As also, any reason why I should be getting this error while using Input parameter?
Kindly let me know if I am missing something in the development of this report.
Regards,
Alston

Hi,
I hope you are taking the BEx Query as a source to the crystal report. In the BEx query check region info object should is maintained as Text and Key. If text is not maintained over there you will not be getting text in Crystal reports.
Krishna.

Forms values are not displayed correctly

This is happening on the client view. I have a custom form and after some Windows updates on user's laptop, the text field values started stopping to display in the form. If I click on View mode then the text values shown and change back to Edit the form
now text values show up in the text field.
Another thing is when trying to print the view out, text values are not shown up at all. I tried to upgrade user to IE11 and same issue. Using Firefox then text values are shown in print preview but not in Editing. I don't want users to use different browser
rather than IE.
Any thoughts on this would be much appreciated.

Hi,
Since the issue happens after some Windows Updates, I would suggest the user log on another machine and see if the issue persists. If the issue only happens on this laptop, you can manually uninstall the update patch you doubt to test
the issue. Go to Control Panel->Programs and Features->View installed Updates->”right click” and “uninstall”.
Meanwhile, add the SharePoint sites to a trusted zone in IE settings.
Thanks.
Tracy Cai
TechNet Community Support

FAGLL03 Special Field Values Do Not Display in Production

We are using the new GL in ECC 6. I have a strange problem where special fields that were added to the line item transactions display in dev and quality but not in production. Please read the steps that I have taken.
1. Using note 984305 we defined special field BSEG-MATNR using this path:
Financial Accounting (New)
General Ledger Accounting (New)
    Master Data
      G/L Accounts
        Line Items
          Define Special Fields for Line Item Display
This field (U_MATNR) displays correctly in FAGLL03.
2. I used note 1034354 to create an implementation of BAdI 'FAGL_ITEMS_CH_DATA. Then I
followed the documentation of the BAdI to create structure CI_FAGLPOSX within FAGLPOSX and added these fields:
Material Type: field MARA-MTART
Material Group: MARA-MATKL
I added code to method CHANGE_ITEMS to read for those fields. Here's part of the code:
* MARA - Get Material Type and Material Group
    SELECT SINGLE mtart matkl
      FROM mara
      INTO (wa_items-zzmtart, wa_items-zzmatkl)
      WHERE matnr = wa_items-u_matnr.
The values of these fields display correctly in development and quality, but they do not display in production.
3. When I debugged FAGLL03 in development I found that the value of U_MATNR was filled when I stopped at method CHANGE_ITEMS. However, when I debugged in production, U_MATNR was not filled. It had to be filled at a later time because the value appears on the report. In my code, I am using U_MATNR to find the values of material type and material group. Because U_MATNR doesn't have a value at that point in time in production, my code doesn't find material type or material group.
4. I contacted SAP and was instructed to use note 984305. I executed the function module
ITEM_STRUC_EXTENSION which did not help.
5 I also used note 205096 to execute report BALVBUFDEL, but this did not help either.
6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
7. I tried to compare configuration between development and production, but everything looked OK to me.
Has anyone had this problem? Any tips?
Brenda

Hi Brenda,
>
Brenda Bankert wrote:
> 6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
I have no idea except that you can make sure Include CI_FAGLPOSX is active as well as the including FAGLPOSX. And please check the transport protocol(s) if CI_FAGLPOSX is included. If you have any kind of error/warning in the import protocol, that may give you a hint.
If nothing helps, create a new sap support case and tell them you are using SAP solutions without modifying anything.
Regards,
Clemens

Some images not displaying in some browsers

Hi,
I'm creating a newsletter in Dreamweaver using the design view.
The finished thing works perfectly in Internet Explorer but when I view it in Firefox or Safari certain images are not displaying. There's no red cross or sign at all of why they're missing. They do however show as attachments at the bottom of the email.
The code appears to be fine and all the images were uploaded in the same way, so can't think why some won't appear while others will. The only thing the missing images have in common is that they're all left aligned so the text wraps around them.
I've been trying to fix this for ages and tearing my hair out. Any help greatly appreciated!!
Thanks.

Um, I can't seem to find it on the server, which can't be a good sign ) - :
Have no idea why it's not appearing where it should but if I can get a link to work I'll send it to you.
Thanks for your help

Oracle Table Values are not displayed when tried to display with Essbase

Hi,
I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
Please help.
Regards,
Paresh

Hi,
Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
**************BIND THE ITAB ****************************
DO 2 TIMES.
APPEND LW_LFBK TO LT_LFBK.
CLEAR LW_LFBK.
ENDDO.
CALL METHOD lo_nd_t_lfbk->bind_table
EXPORTING
new_items = LT_LFBK.
If you want to have dynmic table then take a submit button in the form instead of normal button,
in onaction submit write a loop every time you click that new submit button it should add a new row.
use above coding in onactionsubmit instead of doinit.
Thats it.
Regards,
Ravi

Logo displaying in productin but not displaying in some other user

Hello experts,
I developed payment advice sheet using scripts and transported to production successfully.In production also the output is dispalying correct but some other user (clnt uses different user in that only logo is not displaying) remaining output is correct.
But only logo is not displaying.But in production logo is displaying.What is the problem?
please help me in this?

Please clarify your posting...
In production, the logo displays correctly for all but one user?
Or, did you mean that in the production instance, the logo is correct, but in other SAP instance(s), such as training, etc., the logo does not appear?
If the second case, check to see that transport completed in all target instances.
If the first case, sorry, no ideas about what would cause that.

Issue in query created on infoset - characterstic values are not displayed

Hi,
We have created a query based on an infoset(customized). In this query, values of only one object(sold-to-party) is not displayed. Where as for the same object, values are displayed in the other query created based on the respective ODS.
note : Query based on infoset is alone not coming.
This is the description of the error -
System error in program CL_RSMD_RS and IF_RSMD_RS-READ_META_DATA-02. and it is showing (No entries found).
And apart from that, the values of their respective attributes are also not displayed in the report.
I even verified the object in RSA1 where data is available for that.
Need Help to solve ....
Regards,
Chandru..

Can any one answer for Issue-2. Even I am also facing the same.
Thanks in Advance.

Value help not displayed on some workstations

Similar Messages

Maybe you are looking for