Value in new depreciation area is Zero

Hello All,
I have created a new depreciation area 11. In OABC it is set as 01 (values from book depreciation). In OAYZ, I have assigned the new depreciation area to new asset classes. Then I transferred to value from old assets to new assets by ABUMN and run AFBN for opening the new depreciation area.
In AW01N, I can see the new depreciation area for the asset but with zero value. In the transactions I see the transfer with transaction type 158 and with zero value for the new area. The transaction type taken for book depreciation is 310 and has the correct value. But earlier when I did the testing in quality the transaction type was 310 for both the areas.
In AFBN, the check box Leave initial value was unchecked initially and when I ran it again I result was processed 0 and error 0. I reversed one asset and transferred to new asset class containing both depreciation area again. But again the value in depreciation area 11 is Nil.
Please help.
Thanks,
Sangram

Hi Sangram
Since you are already executed AFBN with the option "Leave initial values", you cannot update the records now, as the table entries have already would have got created in tables ANLB,ANLC, etc.
Now if you want to copy values from other depreicaiton areas to new dep area, one option is to copy a ZZZAFANEW1 by doing a small modification (that is by changing all ABAP commands INSERT to UPDATE) and execute this program. This will update the values from the source depreciation area to target depreciation area, even if table record already exists.
This code is available in SAP note no.317806
Test it thoroughly before using it in Production client. Also take care to enter a correct source and target depreciation area to avoid further problems.
Hope this helps.
Regards

Similar Messages

Value of asset in new depreciation area is Zero

Hello All
I have created a new depreciation area 11. In OABC it is set as 01 (values from book depreciation). In OAYZ, I have assigned the new depreciation area to new asset classes. Then I transferred to value from old assets to new assets by ABUMN and run AFBN for opening the new depreciation area.
In AW01N, I can see the new depreciation area for the asset but with zero value. In the transactions I see the transfer with transaction type 158 and with zero value for the new area. The transaction type taken for book depreciation is 310 and has the correct value.
Can anyone tell me how to get the net book value in area 11.
Thanks,
Sangram

Dear Sangram
To ad a depreciation areas you have to proceed as follows. Point 3 explains how to get how to get the net book value in
area 11.
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
   RAFABNEW :
3.1     Indicator: Leave values initial = not ticked.
             Do not set this indicator if you want the system
             to copy the values from depreciation area 01.
3.2     Indicator: Leave values initial = ticked.
             Set this indicator if you want to open the newly created
             depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
Regards Bernhard

URGENT: I CAN'T SEE DEPRECIATION VALUES IN NEW DEPRECIATION AREA

HELLO: I HAVE CREATED A NEW DEPRECIATION AREA THAT IS SIMILAR TO AREA 01. WHEN I SEE THE REPORT OF ASSET EXPLORER I WATCH VALUES IN SECCTION "DEPRECIATION POSTED/PLANNED" BUT THERE IS NOT VALUES IN THE NEW DEPRECIATION AREA. COULD YOU POSSIBLE HELP ME?
BEST REGARDS,
ALFREDO DEL PORTILLO

try tcode AFAR
A.

New Depreciation Area tobe added to the existing Assets

Hi,
I had Run OAYZ to activate a depreciation area for a Asset Class
I run AFBN to add this new depreciation area to the existing assets.
When I go to Assets Explorer (AW01N) I get following area
Values for Ordinary deprec. have changed in dep. area 13 in fiscal year 2007
    Message no. AU390
Diagnosis
    Depreciation terms were changed in depreciation area 13 since the last
    time depreciation was recalculated. The values for Ordinary deprec. that
    were saved in the database in fiscal year 2007 are therefore different
    from the newly calculated values by an amount of
    476.41-.
Procedure
    Check if the newly calculated values are correct. If they are, then
    carry out a depreciation recalculation. You should be aware that if you
    recalculate depreciation, new values could arise for all open fiscal
    years, and these would then have to be posted to the general ledger by
means of a depreciation posting run.
If, on the other hand, you want to keep the values that are saved in the
database, you have to set the depreciation terms back to how they were
at the time of the last depreciation recalculation.
To see a comparison of the old and new values, you can use the Display
dep. calc. function in the asset value display or the Recalculate values
function in the Asset Accounting menu.
Proceed
Now if I try to click on proceed and recalculate the depreciation (AFAR) the system gives error
40001        0    WRK SURF FOR RDQ WRKPROJCT RMS-RSCH DATA OP.   2007 Error
in dep. calculation
    Message no. BL001
Pl. guide me for the same.
REgards,
Sanjay Soni
[email protected]

Hi Sanjay,
Execute T Code AFBN and add the new depreciation areas to the existing assets. This will add the new dep area to all the assets under the particular char of depreciation.
regards
Sridhar

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

FI-AA new depreciation area - treatment depreciation previous years

Hi,
In the FI-AA module , next to the already existing depreciation area 01 for Fiscal reporting with full integration of postings to FI-GL, I have created a new depreciation area 20 for te purpose of Management reporting which takes over its APC values from depreciation area 01 and does only post different Depreciation values to FI-GL.
Subsequently I updated the data for the new depreciation area in teh already existing asset master data records ( different depreciation keys).
The depreciation calculation and resulting postings for the current year are correct.
However I wonder what will happen with the data for the previous years;
when i look in the asset explorer i do see for the new depr area in the "posted values" tab that it reports for the previous years planned depreciation amounts . However we do not want to post these amounts in the previous years because these years have already been closed and audited.
Will we be able at the end of this fiscal year to changeover FI-AA to the new fiscalyear ( transactions AJAB, AJRW) without the system complaining with error messages that we first need to also perform the depreciation postings for all the previous years in this new depreciation area ?
Many thanks in advance for your much appreciated help.
Kind Regards,
Arjan

Can you please tell me how you added the new depreciaton area to the existing asset masters in those classes ? To get the new depreciation area to show up? We just did the same thing and we're only working with assets that were acquired this year - but we can't get the new depreciation area added to the assets that already existed in those classes. If you figured out how to do that it would sure help us out. I look forward to your response. We're in 4.7.
Thanks
Karla
Never mind found it from reading other posts. I used AFBN and it worked. Thanks
Edited by: Karla Trevithick on Sep 17, 2009 12:39 AM

New Depreciation Area after go-live

Hi Gurus
We are on ECC 6.0 in a production environment having gone live in April 2008.
We had gone live with only Depreciation Area 01. Other depreciation areas were de-activated. We have a requirement now to create a new depreciation area 15 for Income Tax Depreciation. We have activated the Dep Area 15 & did the necessary configuration including activation of group assets. We have run the program AFBN for creating new Dep Area. We have created a couple of assets which are also working fine.
However, when we try to update the depreciation values for assets (using AS92) which are already gone live from April 2008, we encounter a problem. We cannot change the depreciation key for Dep Area 15. Also, the group asset field is deactivated for gone live assets. But it works fine for assets created afresh.
Please help.
Regards

Hi,
You have to select specific asset classes for group assets via the config.
and you can set default dep keys at asset class level. via config. (maintain dep keys for dep area 15)
Please check and revert back.
Thanks,
Srinu

How to update the New Depreciation Area in Asset Master Data

Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
Srinivas

Hi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
   RAFABNEW :
3.1     Indicator: Leave values initial = not ticked.
           Do not set this indicator if you want the system
           to copy the values from depreciation area 01.
3.2     Indicator: Leave values initial = ticked.
           Set this indicator if you want to open the newly created
           depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard

New Depreciation Area - AFBN

Dear Experts,
My user has given a new scenario where we have to calculate tax depreciation for assets transferred from US books to SG books. When the transfers were executed, the tax depreciation area was not set up in the SG books' Chart of Depreciation. We do have other company codes assigned to the same chart of depreciation. For these other company codes, tax depreciation calculation is not required. In addition, the transferred assets and the assets in the other company codes share the same asset classes. The requirement is that we want to calculate the tax depreciation in the SG book only but not the other company codes.
Initially, we are looking at setting up the tax depreciation area in the SG book and activate the depreciation area via AFBN (program RAFABNEW). This will activate the tax depreciation area for all existing assets under the chart of depreciation/asset class assignment. However, we found out that we could not deactivate the depreciation area in the existing assets in the other company codes. This is regardless of whether we activate the field XAFBE (deactivate depreciation area) in the depreciation area layout. Seems that this only works with new assets.
Would like to seek your advice on the options available other than creating new asset classes for these transferred assets.
Is it possible to enhance the program RAFABNEW to include company code and asset classes?
Thank you.

This is another option that I used on that scenario, but it is up to you if you want to follow the same approach. We created a custom program that will put a temporary deactivation date on the assets the we do not want to extend the new book. Basically this is direct update on field ANLA-DEACTIV.
Then we run AFBN, since the assets are deactivated, new depreciation area will not be created on these assets, but only on those assets that are active.
Then you can set the deactivation date again back to "Blank" after you run AFBN.
Thanks!
Jhero

Posting for different APC values to different Depreciation Areas

Hi All,
I am trying to manage in ECC 6.0, different APC values for different depreciation areas, i.e. APC values differ from one dep area to another. I need to post the APC to GL only (i.e. for the 01 i.e. Book Depreciation area). For the remaining depreciation areas for the purposes of reporting I need to maintain different APC values.
One way to achieve this is by maintaining Parallel ledger. Is there any other way this can be achieved.
Thanks in advance
Krishna

Hi,
Use the trnasaction ABSO and clik in the button Dep. Area.
Now you can fill in the value by depreciation area. (when this is set up) use the Trans act type 100
Paul

What are the prerequisites to create New Depreciation areas

Hi SAP experts,
I would like to know what are the prerequisites to create new depreciation areas and what is the configuration for this in details.
Thanks & Regards
Mouly

Hi Mouly,
The pre- requisite for creation of depreciation area are
- Reporting of depreciation as per different laws i.e in india, we need to report depn as per Ind accounting standards, as per income tax act, etc
- Whether we are using parallel currency or not for that company code.
Regards
Vivek

Adding new depreciation area to assets

Hi,
1.I created a new depreciation area 13( tax depreciation) . When I am executing the transaction AFBN for adding this depreciation area to all the assets, first I am getting the error message
+/- sign rule for the new depreciation area is too restrictive
Message no. AU 113 " and
" Closed fiscal years for areas 01 and 13 differ by more than 1 years ".
2. I am in 4.6C and in OAAR, for depreciation area 13 the closed fiscal year is 2002 and for all others 2007.
3. The OSS note 421549 is already implemented.
Any help for resolving this is highly appreciated.
thanks
Srinivasa Vepa

Hii
as u said the message says that the closed fiscal year for dep.area 01 and 13 is more than one year.
and u also state that the fiscal year close for dep area 13 is 2002 and for all others is 2007.
so first step u need to do is to close the fiscal year for dep. area 13 till 2006.
here the functionality of AA works like it allows only 2 fiscal year to be open at the same time.. so as the dep. area 13 is open since 2003 it will give u an error..
so please try to close all this and i m sure it will solve ur query......
thanks
sejal

Legacy data transfer for new depreciation area for already existing assets

Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
Srinivas

HI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas

Cannot Create a new depreciation area

Hello.
I´m having some trouble creating a new Dep Area. At first when I tryed to create a copy from one on the list (Number 15) it showed me an error that said something like: "Transaction tipe 335 does not exists" (later on I´ve figured out that I also needed to create a trans. type Nº337)
The thing is that i must have created them BOTH wrong beacause then i started to guet this error(s):
http://img195.imageshack.us/img195/5691/errorfug.jpg
Can any of you please help me? How do I fix this thing? How do I define correctly the parameters of these tx. types??
Your help will be MOST apreciated. Thanks.
PS: I´m sorry about the grammar, I´m kinda rusty with my english skills.
Edited by: Zeque.- on May 21, 2009 8:22 PM
Edited by: Zeque.- on May 21, 2009 8:23 PM

Yes I have created tx 335. It´s not working yet. I believe I have mess up with the settings.
Can you please showme how to set it right?
Here is the error i get:
Transfer variant 9 02 30: Method 1 acquis. TTY is not allowed
Message no. AC638
Diagnosis
Transfer method 1 is specified for depreciation area 30. A retirement transaction type is assigned for retirements, and therefore an acquisition transaction type must be assigned for acquisitions that allows manual entry of proportional values.
Procedure
Check the assigned transaction type.

How to Update the APC values in another Depreciation Area

Hi
We have an issue that:
Due to our configuration mistakes the past values have not posted to our depreciation area 15 (Tax depreciation) and our Group Assets are not updated with these values. Now we have rectified the configuration but we want to update the already posted values in depreciation area 15 (Group Assets).
How we can update the same.
Thanks in advance to all.

You can use transaction ABSO and use a copy from the transaction type 158 Gross interco.transf.acquis. prior-yr acq.
You have to create a new transaction type copy from 158 and Limit Transaction Types to Depreciation Area 15
TC SPRO: Financial Accounting / Asset Accounting / Transactions / Acquisitions / Define Transaction Types for Acquisitions

Value in new depreciation area is Zero

Similar Messages

Maybe you are looking for