Value intervals for PO release

Hi
Can we put value intervals for the characterestic in the PO release classsification?
Regards

hi
yes u can
go to the rel strategy here in the charecteristic ,value input box press F1 u will all thw info how to put itevals
example
Intervals are written in the following format:
Value1 - Value2        (from Value1 to Value2)
.>Value1                (greater than Value1)
.>=Value1                  (greater than or equal to Value1)
.<Value2                  (less than Value2)
.<=Value2                 (less than or equal to Value2)
.>Value1 - <Value2    (greater than Value1 and less than Value2)
Value1 - <Value2     (greater than or equal to Value1 and
less                        thanValue2)
.>Value1 - Value2     (greater than Value1 and less than or equal to
                      Value2)
hope it help
regards
kunal
Edited by: kunal ingale on Oct 17, 2008 2:42 PM

Similar Messages

Customisation for PO Release (different Values for different Doc Types)

Dear Experts,
I need to configure for PO release procedure where in the Characteristics would be Plant (2 Plants), Doc Type (3 types - Standard PO, Imports PO & Capital PO) and Value (2 stage release: 0-100000 & >100000 INR for Std PO, 0-200000 & >200000 INR for Imports PO and 0-300000 & >300000 INR for Capital PO).
Please let me know where I shoud define the different Values for different Docs for the Release procedure to work properly.
Or let me know the entire procedure for achieving the same.
Regards,
MNP

Hi MNP,
You have to create different CLASSes in IMG with the possible combination of different characteristics,
EX. CLASS EKKO11 - Plant A, Doc type- Std PO, Value- 0-100000 & >100000 INR
CLASS EKKO22- Plant A, Doc type- Import PO, Value- 0-200000 & >200000 INR
CLASS EKKO33- Plant A, Doc type- Capital PO, Value- 0-300000 & >300000 INR and same for other plant
then assign these classes to the respective Release group.
regards,
Pravin

Absolute condition value in contract and release order

Hi,
We are creating quantity contract. When a absolute condition (value) is entered this value is considered for release qty in the contract for calculating the unit price.But when a release order is created for this contract, the same absolute value is for the PO quantity due to which there is a difference in unit price between contract and PO.
Please advice.
Regards,
Pratap

Hi,
Verify you steps, find link below:
http://help.sap.com/saphelp_470/helpdata/en/75/ee0f4d55c811d189900000e8322d00/content.htm
Reetesh

Why can we only use 1 release class for overall Release of Purchase Req?

Hi,
After realizing that it would be beneficial to use more than one release class for overall release of Purchase Requisition with classification, in use with release groups for overall release, I now ask if someone knows why SAP has chosen to only allow 1 release class for overall release of Purchase Requisition?
In my scenario I would like Release group US, used for release strategies for US-plant to be able to use 1 release class with a specific set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_USD including a characteristic PR_TOTVAL_USD looking at CEBAN-GFWRT. The chosen currency for this characteristic would be USD.
I would then like to allow Release group FR, used for release strategies for FRANCE-plant to use another release class with another set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_EUR including a characteristic PR_TOTVAL_EUR looking at CEBAN-GFWRT. The chosen currency for this characteristic would be EUR.
In this way the release strategies for the respective release groups US and FR, could maintain their overall limit values in their respective release strategies in their own currencies.
1. Observe that I do not want to use the same Release class for both release groups for overall release, even though I know that this is currently the only allowed option, as far as I've understood.
2. Observe that I do not want to specify the two characteristics PR_TOTVAL_USD and PR_TOTVAL_EUR for overall value in the same release class, as this would lead to double maintenance for a large number of release strategies. Also consider the maintenance when new countries with new currencies want release strategies.
3. Observe that I only want to use overall release.
What I'm trying to avoid is having to continuously translate local business USD overall value limits to limits in the currency chosen for the overall value characteristic. If this for example is specified in DKK, this would lead to a need to adjust the overall value limits as soon as the exchange rate between USD and DKK changes in the system.
Please consider this simple example:
Local requirement is that USD purchase requisitions should be blocked when the USD value is above 1000 USD. However in my release strategy I would have to maintain a value of >5365 DDK, if DKK is chosen as the currency for overall characteristic.(e.g exchange rate 5,365).
Next month the currency exchange rate in the system between USD and DKK has changed, and therefore I would have to go into CL24N and maintain the value to reflect the new exchange rate between USD and DKK. Lets say it has gone up to 5,435. I would now have to maintain a value of > 5435 DKK in my release strategy to correctly reflect the local business requirement of 1000 USD.
So if anyone could please explain why SAP has taken the decision to make the Release class for overall release client specific that would be much appreciated and awarded accordingly. Also if you have any suggestion on how I could obtain the above scenario on maintaning overall value limits in different currencies than that would be awarded to.
BR Jakob F. Skott

You can give feed back to Apple from the iTunes drop-down menu in the iTunes menu bar..
You can also contact the iTS Customer Service from the links on this page - http://www.apple.com/support/itunes/store/
MJ

ORA-48108: invalid value given for the diagnostic_dest init.ora parameter

Hi All,
I am trying to start my oracle 11g database on windows 7 PC and i am getting below exception
SQL> startup mount
ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
ORA-48140: the specified ADR Base directory does not exist [d:\oracle\app\product\11.2.0\dbhome_1\database\<oracle_base>]
ORA-48187: specified directory does not exist
OSD-00002: additional error information
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is incorrect.
SQL>
Earlier it was working fine. For learning purpose, i have created spfile using pfile and after that i got this issue.
Please help.
Regards,
Sunil

sunil907 wrote:
Hi,
I have provided diagnostic_dest folder location (physical path). Now i am getting some different kind of error on startup.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size                  2182592 bytes
Variable Size             616563264 bytes
Database Buffers          444596224 bytes
Redo Buffers                5595136 bytes
ORA-00205: error in identifying control file, check alert log for more info
Please help
What does your own research of 'ORA-00205' indicate?
the text of the error message is pretty self explanatory .. it couldn't find the control file.
The control files are specified by the "control_files" initialilzation paramter. When you get this error, the instance has started but was unable to mount the control file. since the init file (spfile) was processed and the instance started you can easily see what it thinks are the control files.
oracle:fubar$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Jul 16 12:51:37 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 835104768 bytes
Fixed Size                  2217952 bytes
Variable Size             490735648 bytes
Database Buffers          339738624 bytes
Redo Buffers                2412544 bytes
ORA-00205: error in identifying control file, check alert log for more info
SQL> show parameter control
NAME                                 TYPE        VALUE
control_file_record_keep_time        integer     7
control_files                        string      /u01/app/oracle/oradata/FUBAR/
                                                 controlfile/o1_mf_8ybx4t7w_.ct
                                                 x, /u01/app/oracle/flash_recov
                                                 ery_area/FUBAR/controlfile/o1_
                                                 mf_8ybx4tom_.ctl
control_management_pack_access       string      NONE
SQL>
So what did you do in fixing your original problem that caused your control_files parameter to go south?

New release strategy should not trgger for PO released with old Rel Strategy

Hi All,
Please suggest. Po has been fully released with Release Strtgy V1 XX. Now I m replacing release strategy XX with ZZ. If I change any po which has old rel str XX , system will reset new release strategy as in config changeability indicator 4 maintained.
But requirement is if there is any change or value decreasing in fully released Pos with old strategy it should not retrigger new release strategy. If value Increases then New strategy should retrigger.
Please help me on this.
regards,
Rohit

HI Rohit
A reset of the release strategy only takes place if
       - the changeability of the release indicator is set to '4' in
          case of a purchase requisition and '4' or '6' in case of
          another purchasing document (purchase order, request for
          quotation, contract, scheduling agreement),
       - the document is still subject to the previous release
          strategy,
       - the new TOTAL NET ORDER VALUE is higher than the old one.
The most important thing to consider in to avoid changes to release strategy customizing once the release strategy is used.
The commom steps are:
1- make sure all of the old POs should have been released.
2- don't delete/change the original release strategy. create a new release strategy with copy function, then the old release strategy will not be replaced.
3- if you delete the original release strategy and add a new release strategy which the characteristics in classification is same as old release strategy then the PO (have been approved) will be replaced with the new release strategy.
Kind regards,
Lorraine

Value Contract for a material group

It is possible to create a contract on value basis for a particular material group without material masters.
Thanks
Sanjeev

Hi,
You can create contract value basis for a particular material group without material masters like for example creating contract for service where you can use item category D but you should use always account assignment category U ( contract without stock material ) & later in creating contract release order or call-off WRT contract, you can change account assignment category U to account assignment category K or as required.
Regards,
Biju K

Date of Final Release Indicator for PO Release

Is there a table in SAP that provides the date the PO was approved for Final Release? I know that through ME23N you can get this information in the Environment and Header Changes area, but we would like to add this information to a report and are having trouble locating where SAP is storing the data.

Hi,
Pass into CDPOS table:
OBJECTCLAS = u201CEINKBELEGu201D , OBJECTID = PO Number (EBELN), T. Code = u201CME28 or equal to ME29Nu201D and Get all change document no. (CHANGENR)
TABNAME = u201CEKKOu201D, u201CField Name= FRGKE, Old Value = u201C0u201D and New value = u201C1u201D in to CDPOS and get latest change document number (CHANGENR).
Then pass CHANGENR into Change document No (CDHDR- CHANGENR), OBJECTCLAS = u201CEINKBELEGu201D,
U get who has released and date also.
Regards,
chinna

Value Contracts for Credit note

Dear Friends,
Can we create Value contracts for Credit note processing?
Please refer to the below scenario:
I have certain budget that needs to be distributed to some of the customers depending upon the claims (Credit Notes).
This budget is included in Value contract and values are released through orders (Credit note order). I specify total budget in Target Value of Value contract and as and when the credit note is created, the value of credit note is updated in Released Value.
But when I create credit note, order value is being captured in Negative in released value of Contract document.
If total target value is utilized, I need to restrict the user to create more credit note orders with reference to Value contract.
Can anyone please help with the scenario.
Regards,
Praveen.

Dear Sri,
These are the steps to to configure the output type for credit note.
SPRO>IMG>Sales and Distribution>Basic Functions>Output Control>Output Determination>Output Determination Using the Condition Technique-->Maintain Output Determination for Billing Documents
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functions
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
Here you just copy the standard output type RD00 then rename it according to you, then assign the Z form for that output type.
Maintain condition record through VV31 transaction with your credit note document type.
I hope this will help you,
Regards,
Murali.

"ON VALUE REQUEST FOR" Activation Error!

Hi All,
Am using a field on my Selection Screen:
SELECT-OPTIONS s_kh_ch FOR p9240-subty NO INTERVALS.
When, am calling an event, to populate the search help for this field:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_kh_ch-low.
PERFORM f_call_f4_help TABLES git_subty_9240 USING 'SUBTY' 'P9240-SUBTY'.
It is giving an activation error!
"ON VALUE REQUEST FOR" should be followed by <parameter> or <select-option>-LOW/<select-option>-HIGH.
BUT, For your Information, the same On Value Request For event works well, when i define the field as PARAMETER!
Why is this error being thrown ? Anyone faced this kind of activation error?
Kindly Help...
Thanks in advance.
Rgds,
Sundar.

HI,
try this
data: g type anla-anln1.
data: itab like anla occurs 0 with HEADER LINE.
select-options s for g.
at selection-SCREEN on VALUE-REQUEST FOR s-low.
perform routine tables itab
                   using s-low.
*&      Form routine
      text
     -->P_ITAB text
     -->P_S_LOW text
FORM routine TABLES   P_ITAB STRUCTURE anla
              USING    P_S_LOW.
ENDFORM.                    " routine
reward points if helpful,
regards,
venkatesh

Reg. Characteristics and Class for PO release stretagy

Dear Experts
We want to release PO, what should be the Characteristic and Class, how to create the both. Pls advise the required table and class name.
Thanks
Rajakumar

hi,
Characteristics are the criteria for a release condition. If the criteria of a release condition are satisfied, the associated release strategy is assigned to the purchasing document like PURCHASE ORDER.
you can find it under menu path:
SPRO > MATERIAL MANAGEMENT > PURCHASING > PURCHASE ORDER > RELEASE PROCEDURE FOR PURCHASE ORDER > EDIT CHARACTERISTIC.
you can create charateristic based on plant,document type,value,purchase group.
In the basic data screen we have to enter the following inputs.
1DESCRIPTION                     PLANT
2STATUS                                     RELEASED
3DATA TYPE                     CHARACTER FORMAT
4NUMBER OF CHARACTER     4
5VALUE ASSIGNMENT     MULTIPLE VALUES
In the description screen we have to enter the language and description
In the restrictions screen we have to enter the class type.
Class type is the top-level unit of control for classes
The class type is used to define a number of parameters, such as:
u2022     The objects that can be classified in a class.
u2022     Whether objects of different object types can be classified in the same class.
u2022     Whether an object can be classified in more than one class of the same class type.
u2022     The class maintenance screens that can be processed.
Each class must be assigned to exactly one class type. There is no connection between the individual class types.
In the restriction screen we have to enter class type u201C032u201D.
We use a class to group together characteristics that are to constitute a release condition for a release strategy. In this step we assign this class to the release strategy.
menu path is : SPRO > MATERIAL MANAGEMENT > PURCHASE ORDER > RELEASE PROCEDURE FOR PURCHASE ORDER > EDIT CLASS
there should be only one class for all the release procedure.
for po the table is cekko and for pr it is ceban
jash

MM06E008 - Monitoring of contr. target value in case of release orders

Hi,
I'm working on the enhancement MM06E008 (meant for monitoring the Contr. target value in case of release orders). Based on the requirement, we need to issue either an information or a warning message thru the exit. The message is getting triggered only when i issue an error message. Rather i want to send an information or a warning message. The requirement is such that we could not use the 06 Message class 042 Number in the config and thus we had to make use of this exit.
Can anyone let me know if it is possible to issue a non-error message (Say a warning or an info) thru the exit.
Points will be rewarded for helpful answers.
Thanks,
Venkat

HI,
Try this:
EXIT_SAPMM06E_013
*" XEINA STRUCTURE EINAU OPTIONAL
*" YEINA STRUCTURE EINA OPTIONAL
In debug find out what values are stored in XEINA and YEINA. One is the old value and the other is the new value.
Regards,
Subramanian

User exit for triggering release strategy

Hello Experts,
My requirement is when changes are made in purchase order (ME22N) then once again release strategy will have to get trigger.
is the user exits exists for this purpose,if yes, What is it?. I searched alot but not able to find right exits.

Hello ,
I think you can achieve this via configuration .Basically you want the release strategy to get redetermined based on the changes in the item or if the price of these items increase a certain level .if you have the release startegy as changeble in the SPRO ticked it will automatically go for new release strategy if you have the value of release indicator set .This can be done SPRO->MM->Purchase order->Release procedure for purchase order->Define release procedure->Release indicator.
Set the appropriate value .
Remember you need to know what is that it retrigger that release strategy .
The link below deals with similar requirement ....
[http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/retrigger-release-strategy-for-purchase-requisition-with-any-change-1858101]
Thanks
Anjaneya .
Edited by: Anjaneya Bhardwaj on Aug 31, 2011 8:21 AM

Release Group for PR Release Strategy

Hi ,
When i am trying to define new "Release Group" AA , with Class "Z_PR" (it has Plant and Item Value as charcteristics ) , I am receiving message "Please Check Release Classes" , Message no. ME492.It doesn't allow me to save this new release group.
Please also note that other two release Groups are already available.
Do u know what I am missing and how can I save my Release group ?
ALSO as per the LONG text of this prompted message
"Diagnosis
Here you can assign release groups to release classes. Only one release class should be used within the release groups for overall release and the release groups without overall release in each case. However, in this instance several release classes have been used."
What does it mean ?
Sandeep

Hi,
The message has explained the problem.
You cannot have two classes for the same document release and you are tryng to break this rule by adding another entry (the fact that you have give it a different release group does not make any difference this is still another class for the same document.)
You should be able to do what you want without the need for a new release group or additional class, after all everyone else that uses SAP is using one class per document.
Why diod you think that you needed another release group / class?
Steve B

Email functionality for PO Release Strategy:

Email functionality for PO Release Strategy:
>When PO is blocked an email must be sent out to the first approver.
>If there is a second approver there should be sent out an e-mail after the first level is approved and soon.
>When a PO is released by last approver an e-mail must be sent to the creator of the PO
I need develop this demand without workflow.
I found an Exit 'EXIT_SAPMM06E_013' which is triggering when 'ME21N' is executed.
But i'm unable to update the table EKKO before my code is executed.
Here i need Rel. gr(FRGGR),
            Rel Str.(FRGSX),
            Rel Indicator(FRGKE),
            subject to release(FRGRL) AND
            Rel Status(FRGZU) from table EKKO to check whether the PO is Blocked or Released.
Based on the values got from the table EKKO, i need pick email ids from ZTable which stores Email Ids.
I'm able to get the PO no which is currently genereated and i need to pass this PO no. to table EKKO to get the above fields.
But Table EKKO is updating in the database after the execution of my code.
What do i need to do to get table EKKO updated in the database before my code is executed.

Email functionality for PO Release Strategy:
>When PO is blocked an email must be sent out to the first approver.
>If there is a second approver there should be sent out an e-mail after the first level is approved and soon.
>When a PO is released by last approver an e-mail must be sent to the creator of the PO
I need develop this demand without workflow.
I found an Exit 'EXIT_SAPMM06E_013' which is triggering when 'ME21N' is executed.
But i'm unable to update the table EKKO before my code is executed.
Here i need Rel. gr(FRGGR),
            Rel Str.(FRGSX),
            Rel Indicator(FRGKE),
            subject to release(FRGRL) AND
            Rel Status(FRGZU) from table EKKO to check whether the PO is Blocked or Released.
Based on the values got from the table EKKO, i need pick email ids from ZTable which stores Email Ids.
I'm able to get the PO no which is currently genereated and i need to pass this PO no. to table EKKO to get the above fields.
But Table EKKO is updating in the database after the execution of my code.
What do i need to do to get table EKKO updated in the database before my code is executed.

Value intervals for PO release

Similar Messages

Maybe you are looking for