Value Mapping Error : valueMapping.rb_ValueMapException.NO_GROUPID

Hi,
There is a error log in the java Engine for the value mapping, but then the value mapping still working fine.
Error During value mapping
Thrown:
MESSAGE ID: com.sap.aii.ibrun.server.valueMapping.rb_ValueMapException.NO_GROUPID
com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor$NoGuidException: Context = http://sap.com/xi/XI, agency = ListOfSite, scheme = http://xyz.com:abc_site, and value = 9010 not found
at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.getGroupIdEx(DBValMapPersistor.java:689)
at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.findMappings(DBValMapPersistor.java:569)
at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.findMappings(DBValMapPersistor.java:616)
at com.sap.aii.ibrun.server.valueMapping.ValueMappingService.execute(ValueMappingService.java:118)
at com.sap.aii.ibrun.server.valueMapping.ValueMappingService.executeMapping(ValueMappingService.java:50)
Please advise ?
Regards
FL.

Hello
Please check the solution in the SAP note #1476480 Context usage for Value Mapping Replication Interface. Also check if there area any errors with the Value Mapping cache in RWB -> Cache Monitoring.
Regards
Mark

Similar Messages

Value Mapping error

Hi Experts
While testing Value Mapping we are getting following error in trace
Trace level="1" type="T">Key mapping from some information----
has not been performed</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
Regards
Abhishek Mahajan

Hi,
please, check source and receiver schema and agency. its key sensitive. also make sure that the value you are sending is loaded in the value mapping table.
PI 7.1 support test mapping using Value mapping.
also see this
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5
let me know
Rodrigo

Value Mapping Insert Error

Hi
I am sendind an item value mapping from R3 to XI and I get this error:
<ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System">
- <standard>
<faultText>A value is missing for content of Identifier in item 0.</faultText>
- <faultDetail>
<text />
<id>7</id>
</faultDetail>
</standard>
- <addition>
<ItemNr>0</ItemNr>
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company" />
</Item>
</addition>
</ns:ValueMappingReplicationFault>
The code in R3 is this one
REPORT Z_XI_REPLICATE_VALUE_MAPPING.
data: My_ZCO_MI_CONSULTA_SERIAL type ref to
                CO_SVMR_VALUE_MAPPING_REP_SYNC,
      in type SVMR_VALUE_MAPPING_REP_RESP,
      out type SVMR_VALUE_MAPPING_REPLICATION,
      vIdentifier type SVMR_VALUE_MAPPING_IDENTIFIER,
      vItem type SVMR_VALUE_MAPPING_REP_ITEM,
      vItemLst type SVMR_VALUE_MAPPING_REP_TAB,
      vList type SVMR_VALUE_MAPPING_REP_LIST,
      lo_sys_exception   TYPE REF TO cx_ai_system_fault.
try.
    create object My_ZCO_MI_CONSULTA_SERIAL.
    vIdentifier-scheme = 'BS_PEPE'.
    vIdentifier-agency = 'Company'.
    vIdentifier-value = '122'.
    vItem-Group_id = '037dd9b01a3111da8abef522ac127968'.
    vItem-operation = 'Insert'.
    vItem-context = 'http://sap.com/xi/XI'.
    vItem-Identifier = vIdentifier.
    append vItem to vItemLst.
    vList-item = vItemLst.
    out-VALUE_MAPPING_REPLICATION = vList.
    call method My_ZCO_MI_CONSULTA_SERIAL->EXECUTE_SYNCHRONOUS
      EXPORTING
        output = out
      IMPORTING
        input = in.
CATCH cx_ai_system_fault INTO lo_sys_exception.
    write: /'Error Text   --> ',lo_sys_exception->errortext.
    write: /'Error Code   --> ',lo_sys_exception->code.
    exit.
ENDTRY.
write: /'ESN_STATUS --> ',in-STATUS.
The message sent to XI and I see in the sxmb_moni in R3 is this one
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:ValueMappingReplication xmlns:nr1="http://sap.com/xi/XI/System">
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company">122</Identifier>
</Item>
</nr1:ValueMappingReplication>
When I try to delete a Group it works but not when I want to insert an individual item.
What am I doing wrong?
Thanks
Regards

Hi
There is a field call CONTROLLER with this structure:
FIELD     FIELDNAME     CHAR     30     0     Field Name
VALUE     PRX_CONTR     CHAR     1     0     Field Control in XML Data Stream (=> Type Group SAI)
But in SAP documentacion does not say any references to this field and how to fill them.
I am asbolute sure I filled all the mandatory fields.
Thanks
Regards

Error in Value Mapping Replication

Hi
I am trying to upload a flat file to value mapping table using the standard interface given by SAP. I am getting the error ' HTTP_RESP_STATUS_CODE_NOT_OK' in message monitoring.
I have already registered the interface on the proxy and is successful and created adapter on reciever side for java proxy as stated in the documentaion. on the reciever side I craeted a business service as reciever of interface 'ValueMappingReplication' and communication channel that I created for java proxy input.
Any thing I am missing ? Any help willl be appriciated.
Thanx & regards
Vinod ahir

Check if you have trailing spaces in the communication channel. If so, remove them.
Check the port number of the URL which leads to the Java Proxy. It has to be the J2EE port.
Regards
Stefan

Error - 403 - Value mapping replication - not authorized

Hello Experts,
I tried to implement the value mapping replication in PI 7.1as per the below article.
"http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07dd2ae-f783-2c10-9aa6-ca69f67dd20f"
As given in the article i have configured everything in Integration Directory.
I have tried the same thing but getting the following error in "call adapter step" after sending the XML from soap client.
"<b>&nbsp;&nbsp;You are not authorized to view the requested resource.</b>"
I am able to find 2 error messages in SXMB_MONI.
i think this is an issue with user details in XI channels.
Please let me know what is the issue,user we have to give in XI receiver channel andwhat ROLE one should have to test the scenario.
Many thanks.
Regards,
Harish

Hi Hareesh,
Can you try to use the RFC/ communication user in the communication channel and try?
Please check the authentication type also, check if you will require non-sap type or sap type.
Thanks,
Hetal

Value Mapping Replication - Issue - Authorization Error

Hi all,
I am trying to do value mapping replication of the data from a table in ECC system using an outbound proxy on ECC and ASync Inbound interface on XI - valuemappingreplication.
Steps followed:
1. Created Table Stucture and did write a report to extract the data from the table in ECC to send the data through Outbound proxy.
2.Followed this blog - Value Mapping replication
When tried to execute the scenario after all the steps in the above blog, we have an error in sxmb_moni saying that the authentication failed. I used pisuper, pidiruser in the receiver communication channel
3.Generated a Java Proxy for the valuemappingreplication interface.
4.Tried to deploy the .jar from the above step using SDM, I was not able to deploy it.
reg
Edited by: naveen chitluri on Jul 16, 2008 12:55 PM

All,
For the value mapping replication,
I have tried to send the message to URL directly for RWB, Test Message in the Component Monitoring http://server:50400/MessagingSystem/receive/JPR/XI.
I am getting an error saying that:
Delivery of the message to the application using connection JPR failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered: com.sap.aii.proxy.xiruntime.core.XmlRecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered
Can anyone throw some light on this.
reg

Value Mapping Replication : Error Category: XIServer

Hi All,
I'm doing a value mapping replication. Have configured the interface proxy-pi (Async) and the message is transferred to pi with no issues but in pi the message is logged with the following error as in payload:
>Error while receiving by HTTP (error code: 200, error text: Error Parsing Response. No XI Response Received
Link to payload > [http://www.esnips.com/web/SAPIssues ]
tried various cases yet the issue remains the same. any helpful tip on this?
thanks
Prabhu

Error in RWB: To be delivered
Error in moni: Payload as posted in the thread (refer link)
Error in SMQ2: User column:XIISUSER statustext column: Command to tRFC/qRFC: Execute LUW again

401 - Unauthorized error in Value Mapping Replication scenario

Hi,
I'm trying to push some Value Mapping replication data from one of the clients (which is a non-Integration Server) of XI system to IS. When I execute the program which calls the outbound proxy, the XI message fails with the error HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorised.
As given in SAP help, I registered the inbound java proxies and generated the outbound proxies. I confiured the receiver channel with path /MessagingSystem/receive/JPR/XI. In authentication data, I tried several users such as XISUPER, XIAPPLUSER, XIISUSER..Still I get the same error.
What is missing/wrong?
Thanks in advance
Praveen Sirupa

Hi Praveen,
Could you pls do the following...just for verification....
enter the url http://<was_server>:5<sysnr>00/MessagingSystem/receive/JPR/XI
and when it asks for authentication give the XIAPPLUSER and password...you should get an xml that looks like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>
Thanks,
Renjith

XI Value Mapping Replication JPR Error

Hello together,
I am trying to insert items from a csv-file into XI Value Mapping by using the XI adapter. Mapping and configuration is finished, the file is picked by file-adapter and comes through the mapping. In the SXMB_MONI the message is processed correctly, but in the RWB I get the following error:
"Runtime exception during XML parsing: Error parsing document. Exception: Generic Exception: com.sap.aii.proxy.xiruntime.core.XmlProxyRuntimeException: InvocationTargetException when calling method com.sap.xi.xI.system.ValueMappingReplicationItem_Type$Operation_Type.fromValue: insert is not among the enumerated values."
Do you have any idea, what the problem is?
Thank you very much in advance!
Kind regards,
Fred

What is the receving adapter?
It would be worth extending the trace file to get a better handle on the error.
Traces are used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments at class and method level. This is done with the help of the log configurator service:
     Services
     Log Configurator
     Locations
     Choose the location (Java package) and the tracing level (severity)
(for example, com.sap.aii.adapter.file)
     Root Location > com > sap > aii > File
     Set the severity and choose Copy Severity to Subtree.
Depending on what adapter you are using, determines the root location.
Do this then run the interface again. The trace file will provide the specific error causing the problem.

Raising error from Value Mapping

All,
We are using value mapping for a particular field in our messages. The value mapping table does have entries for most of the entries.
Is there a way to raise an error - when the runtime gets a value that is not defined in the value mapping table?
Thanks.

Let me also explain what we are trying to do. probably that will help in getting a better or easier solution.
we are using the value mapping mass replication, where in we get the whole translation table into the cache and use it in our application. This table is pushed from R/3 using a report/proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
I was worried that what will happen, if for some reason the cache is cleared during a restart or something. All the value mappings will fail - till the time the data is sourced again from the R/3 system - right? (we are currently having the R/3 proxy push the translation data every 12 hours or so, but was worried about the time in between).
Thanks.

Error in Domain value mapping.

Dear all,
I was trying a simple file to file scenario using ESB with the Domain value mapping(DVM).
I was trying to replace the incoming long state codes with the short keywords.
I was using the DVM to configure the field to be changed in the XSL map.
I have also configured tracking fields for Routing service and the Outbound adapter in the ESB Console.
But after the instance the long names are not replaced with short keywords it come as blank in the place of names.
In the ESB console the RS is tracking the fields and the outbound adapter not. I was using a simle text file which has two columns Andrew, Bangalore delimited by comma and optionally enclosed by space.
Please help me.

Thanks for the reply Chintan,
Yes it is not working, I was doing the esb-customerdvm.pdf sample DVM as specified in the following link
http://www.oracle.com/technology/products/integration/esb/files/esb-customerdvm.pdf
My map also has three columns and I was the specifying Map name, Source column name as "Long" and the target column name as "Short" and the default value as "" in the lookup-dvm function in the XSL stylesheet.
And I have also specified the trackable fields for the Routing service and the Outbound adapter in the ESB Console but after the instance only the RS shows the tracked data and the Outbound adapter doesnot and it shows Nodata.
When I give the Input as the text file with columns Prasath, Chennai in the output file the Prasath is only coming what I expect is Chennai should be replaced by its short name CH but it is not coming like that.
Here I also specify the coding of XSL Stylesheet map.
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="DVMapsInput.wsdl"/>
<rootElement name="Leaf" namespace="http://TargetNamespace.com/DVMapsInput"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="DVMapsOutput.wsdl"/>
<rootElement name="Leaf" namespace="http://TargetNamespace.com/DVMapsInput"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:imp1="http://TargetNamespace.com/DVMapsInput"
xmlns:ns0="http://www.w3.org/2001/XMLSchema"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/DVMapsInput/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/DVMapsOutput/"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/file/"
exclude-result-prefixes="xsl plt pc imp1 ns0 jca ns1 hdr tns bpws ehdr hwf xp20 xref ora ids orcl">
<xsl:template match="/">
<imp1:Leaf>
<imp1:C1>
<xsl:value-of select="/imp1:Leaf/imp1:C1"/>
</imp1:C1>
<imp1:C2>
<xsl:value-of select='orcl:lookup-dvm("Citycode","Long",/imp1:Leaf/imp1:C2,"Short","")'/>
</imp1:C2>
</imp1:Leaf>
</xsl:template>
</xsl:stylesheet>
Please help on this.
Thanks.

Agency error on Value Mapping in 7.1.

Hi,
I'm facing a problem with value mapping using message mapping. The problem is that i can only choose as a Source/Target Agency the SenderParty/ReceiverParty but I can not use sender/receiver business system .
Does anyone knows why? I'm using as Agencies the bussines system, so when I use the Party, the mapping program trhows an exeption.
Thanks in advance,
Ariel

Ok, Problem Solved.
I Used SenderService ; ReceiverService insead of SenderParty; ReceiverParty.
Cheers,
Ariel

Value Mapping Problem - Values not appearing in destination system

hello everyone,
Here's my scenario: XML > XI > IDOC
I have a problem with the ValueMapping and FixedValue function in XI. When I test the message in the Integration Repository, I don't get any problems (the value is converted appropriately), but when I view the IDOC in SAP, the value that is supposed to be in the field is missing.
When I check the payload in SXMB_MONI in XI, no conversion occurs. I have refreshed the caches, and everything seems to be fine. I don't know why the value mapping functions seem to have stopped working altogether. Will anyone be able to help me out with my problem?
Thanks in advance!
Glenn

Hi Glenn Bumanlag,
I think the values that you have given for source values (Agency and scheme)
and Target values (Agency and scheme) may be mismatching so kindly chek that...even i got the same error in the past..........
If you the this problem kindly change it accordingly and also refresh the cache once you that with this.........
Kindly follow the below mentioned link and check if you have followed these steps.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5
Thanks
Sai
PS: kindly reward points if helpful

Value Mapping using XSLT mapping

Hello All,
We have change requirement of storing some xsl Key-Value in SAP PI and on run time existing XSLT mapping need to look that values and in target structure map the value as per source key value.
For this requirement i am going with value mapping that will call from XSLT mapping and created a test scenario before actual changes in XSLT mapping
I have created table in ID.
But unfortunately i am getting below error :
Transformer Configuration Exception occurred when loading XSLT Test_Mapping.xsl; details: Could not load stylesheet.com.sap.engine.lib.xsl.xpath.XPathException: Prefix not mapped: ValueMap -> java.lang.Exception: XMLParser: Prefix 'ValueMap' is not mapped to a namespace
Below is my XSLT mapping code :
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="urn:kesko.fi.XSLTTest" xmlns:ns1="urn:kesko.fi.XSLTTest">
<xsl:template match="/">
<xsl:param name="Dept_ID">
<xsl:value-of select="ns0:MT_EmpDet_S/ID"/>
</xsl:param>
<xsl:param name="inputparam"/>
<ns1:MT_EDet_R>
<Name>
   <xsl:value-of select="ns0:MT_EmpDet_S/Name"/>
</Name>
<Department>
   <xsl:if test="function-available('ValueMap:getValueMapping')">
     <xsl:value-of select="ValueMap:getValueMapping('http://sap.com/XI/xi', 'http://sap.com/XI/xi', 'S','S1', 'T', 'T1', $Dept_ID, $inputparam,'TRUE')"/>
   </xsl:if>
</Department>
<PersonalInfo>
    <xsl:value-of select="concat(ns0:MT_EmpDet_S/Add, ns0:MT_EmpDet_S/SAL)"/>
</PersonalInfo>
</ns1:MT_EDet_R>
</xsl:template>
</xsl:stylesheet>
Thanks,
Anant

Thanks again.
But after adding the namespace I am still getting error.
Can you please extend your help so that i can proceed further.
Please check below code that i tried to execute :
1st :
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ValueMap="com.sap.aii.mapping.value.api.XIVMService"
xmlns:ns0="urn:kesko.fi.XSLTTest" xmlns:ns1="urn:kesko.fi.XSLTTest">
<xsl:template match="/">
<xsl:param name="Dept_ID">
<xsl:value-of select="ns0:MT_EmpDet_S/ID"/>
</xsl:param>
<xsl:param name="inputparam"/>
<ns1:MT_EDet_R>
<Name>
   <xsl:value-of select="ns0:MT_EmpDet_S/Name"/>
</Name>
<Department>
   <xsl:if test="function-available('ValueMap:getValueMapping')">
     <xsl:value-of select="ValueMap:getValueMapping('http://sap.com/XI/xi', 'http://sap.com/XI/xi', 'S','S1', 'T', 'T1', $Dept_ID, $inputparam,'TRUE')"/>
   </xsl:if>
</Department>
<PersonalInfo>
    <xsl:value-of select="concat(ns0:MT_EmpDet_S/Add, ns0:MT_EmpDet_S/SAL)"/>
</PersonalInfo>
</ns1:MT_EDet_R>
</xsl:template>
</xsl:stylesheet>
2nd :
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ValueMap="com.sap.aii.mapping.value.api.XIVMService"
xmlns:ns0="urn:kesko.fi.XSLTTest" xmlns:ns1="urn:kesko.fi.XSLTTest">
<xsl:template match="/">
<xsl:param name="Dept_ID">
<xsl:value-of select="ns0:MT_EmpDet_S/ID"/>
</xsl:param>
<xsl:param name="inputparam"/>
<ns1:MT_EDet_R>
<Name>
   <xsl:value-of select="ns0:MT_EmpDet_S/Name"/>
</Name>
<Department>
     <xsl:value-of select="ValueMap:executeMapping('S','S1',$Dept_ID,'T','T1')"/>
</Department>
<PersonalInfo>
    <xsl:value-of select="concat(ns0:MT_EmpDet_S/Add, ns0:MT_EmpDet_S/SAL)"/>
</PersonalInfo>
</ns1:MT_EDet_R>
</xsl:template>
</xsl:stylesheet>
for above both the cases messages are failing in MONI.
Thanks in advance.
Anant

Value Mapping Log in Server

Hi,
Whenever we execute the sceanrio with the value which is not specified in our Value Mapping Table we are getting this following error in our Log.
The error is attached below.
Error During value mapping Thrown: com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor$NoGuidException: Context = http://sap.com/xi/XI, agency = Slot, scheme = Appointment, and value = ALLDAY not found at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.getGroupIdEx(DBValMapPersistor.java:656) at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.findMappings(DBValMapPersistor.java:553) at
Can you please me in this situation as it si bit important.
Is there any way that i can make this error not shown in the server log.
Thanks
Suja

Hello Suja,
you have to change the settings in the log configurator. Set the locations
com.sap.aii.ibrun.server.valueMapping and com.sap.aii.mappingtool.flib3.ValueMapping
to severity "Fatal". After this these errors should not be inserted into the default trace anymore.
Best Regards,
Lars

Value Mapping Error : valueMapping.rb_ValueMapException.NO_GROUPID

Similar Messages

Maybe you are looking for