Value Mapping error

Hi Experts
While testing Value Mapping we are getting following error in trace
Trace level="1" type="T">Key mapping from some information----
has not been performed</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
Regards
Abhishek Mahajan

Hi,
please, check source and receiver schema and agency. its key sensitive. also make sure that the value you are sending is loaded in the value mapping table.
PI 7.1 support test mapping using Value mapping.
also see this
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5
let me know
Rodrigo

Similar Messages

Value Mapping Error : valueMapping.rb_ValueMapException.NO_GROUPID

Hi,
There is a error log in the java Engine for the value mapping, but then the value mapping still working fine.
Error During value mapping
Thrown:
MESSAGE ID: com.sap.aii.ibrun.server.valueMapping.rb_ValueMapException.NO_GROUPID
com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor$NoGuidException: Context = http://sap.com/xi/XI, agency = ListOfSite, scheme = http://xyz.com:abc_site, and value = 9010 not found
at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.getGroupIdEx(DBValMapPersistor.java:689)
at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.findMappings(DBValMapPersistor.java:569)
at com.sap.aii.ibrun.server.valueMapping.DBValMapPersistor.findMappings(DBValMapPersistor.java:616)
at com.sap.aii.ibrun.server.valueMapping.ValueMappingService.execute(ValueMappingService.java:118)
at com.sap.aii.ibrun.server.valueMapping.ValueMappingService.executeMapping(ValueMappingService.java:50)
Please advise ?
Regards
FL.

Hello
Please check the solution in the SAP note #1476480 Context usage for Value Mapping Replication Interface. Also check if there area any errors with the Value Mapping cache in RWB -> Cache Monitoring.
Regards
Mark

Value Mapping Insert Error

Hi
I am sendind an item value mapping from R3 to XI and I get this error:
<ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System">
- <standard>
<faultText>A value is missing for content of Identifier in item 0.</faultText>
- <faultDetail>
<text />
<id>7</id>
</faultDetail>
</standard>
- <addition>
<ItemNr>0</ItemNr>
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company" />
</Item>
</addition>
</ns:ValueMappingReplicationFault>
The code in R3 is this one
REPORT Z_XI_REPLICATE_VALUE_MAPPING.
data: My_ZCO_MI_CONSULTA_SERIAL type ref to
                CO_SVMR_VALUE_MAPPING_REP_SYNC,
      in type SVMR_VALUE_MAPPING_REP_RESP,
      out type SVMR_VALUE_MAPPING_REPLICATION,
      vIdentifier type SVMR_VALUE_MAPPING_IDENTIFIER,
      vItem type SVMR_VALUE_MAPPING_REP_ITEM,
      vItemLst type SVMR_VALUE_MAPPING_REP_TAB,
      vList type SVMR_VALUE_MAPPING_REP_LIST,
      lo_sys_exception   TYPE REF TO cx_ai_system_fault.
try.
    create object My_ZCO_MI_CONSULTA_SERIAL.
    vIdentifier-scheme = 'BS_PEPE'.
    vIdentifier-agency = 'Company'.
    vIdentifier-value = '122'.
    vItem-Group_id = '037dd9b01a3111da8abef522ac127968'.
    vItem-operation = 'Insert'.
    vItem-context = 'http://sap.com/xi/XI'.
    vItem-Identifier = vIdentifier.
    append vItem to vItemLst.
    vList-item = vItemLst.
    out-VALUE_MAPPING_REPLICATION = vList.
    call method My_ZCO_MI_CONSULTA_SERIAL->EXECUTE_SYNCHRONOUS
      EXPORTING
        output = out
      IMPORTING
        input = in.
CATCH cx_ai_system_fault INTO lo_sys_exception.
    write: /'Error Text   --> ',lo_sys_exception->errortext.
    write: /'Error Code   --> ',lo_sys_exception->code.
    exit.
ENDTRY.
write: /'ESN_STATUS --> ',in-STATUS.
The message sent to XI and I see in the sxmb_moni in R3 is this one
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:ValueMappingReplication xmlns:nr1="http://sap.com/xi/XI/System">
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company">122</Identifier>
</Item>
</nr1:ValueMappingReplication>
When I try to delete a Group it works but not when I want to insert an individual item.
What am I doing wrong?
Thanks
Regards

Hi
There is a field call CONTROLLER with this structure:
FIELD     FIELDNAME     CHAR     30     0     Field Name
VALUE     PRX_CONTR     CHAR     1     0     Field Control in XML Data Stream (=> Type Group SAI)
But in SAP documentacion does not say any references to this field and how to fill them.
I am asbolute sure I filled all the mandatory fields.
Thanks
Regards

Error in Value Mapping Replication

Hi
I am trying to upload a flat file to value mapping table using the standard interface given by SAP. I am getting the error ' HTTP_RESP_STATUS_CODE_NOT_OK' in message monitoring.
I have already registered the interface on the proxy and is successful and created adapter on reciever side for java proxy as stated in the documentaion. on the reciever side I craeted a business service as reciever of interface 'ValueMappingReplication' and communication channel that I created for java proxy input.
Any thing I am missing ? Any help willl be appriciated.
Thanx & regards
Vinod ahir

Check if you have trailing spaces in the communication channel. If so, remove them.
Check the port number of the URL which leads to the Java Proxy. It has to be the J2EE port.
Regards
Stefan

Error - 403 - Value mapping replication - not authorized

Hello Experts,
I tried to implement the value mapping replication in PI 7.1as per the below article.
"http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07dd2ae-f783-2c10-9aa6-ca69f67dd20f"
As given in the article i have configured everything in Integration Directory.
I have tried the same thing but getting the following error in "call adapter step" after sending the XML from soap client.
"<b>&nbsp;&nbsp;You are not authorized to view the requested resource.</b>"
I am able to find 2 error messages in SXMB_MONI.
i think this is an issue with user details in XI channels.
Please let me know what is the issue,user we have to give in XI receiver channel andwhat ROLE one should have to test the scenario.
Many thanks.
Regards,
Harish

Hi Hareesh,
Can you try to use the RFC/ communication user in the communication channel and try?
Please check the authentication type also, check if you will require non-sap type or sap type.
Thanks,
Hetal

Value Mapping Replication - Issue - Authorization Error

Hi all,
I am trying to do value mapping replication of the data from a table in ECC system using an outbound proxy on ECC and ASync Inbound interface on XI - valuemappingreplication.
Steps followed:
1. Created Table Stucture and did write a report to extract the data from the table in ECC to send the data through Outbound proxy.
2.Followed this blog - Value Mapping replication
When tried to execute the scenario after all the steps in the above blog, we have an error in sxmb_moni saying that the authentication failed. I used pisuper, pidiruser in the receiver communication channel
3.Generated a Java Proxy for the valuemappingreplication interface.
4.Tried to deploy the .jar from the above step using SDM, I was not able to deploy it.
reg
Edited by: naveen chitluri on Jul 16, 2008 12:55 PM

All,
For the value mapping replication,
I have tried to send the message to URL directly for RWB, Test Message in the Component Monitoring http://server:50400/MessagingSystem/receive/JPR/XI.
I am getting an error saying that:
Delivery of the message to the application using connection JPR failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered: com.sap.aii.proxy.xiruntime.core.XmlRecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered
Can anyone throw some light on this.
reg

Value Mapping Replication : Error Category: XIServer

Hi All,
I'm doing a value mapping replication. Have configured the interface proxy-pi (Async) and the message is transferred to pi with no issues but in pi the message is logged with the following error as in payload:
>Error while receiving by HTTP (error code: 200, error text: Error Parsing Response. No XI Response Received
Link to payload > [http://www.esnips.com/web/SAPIssues ]
tried various cases yet the issue remains the same. any helpful tip on this?
thanks
Prabhu

Error in RWB: To be delivered
Error in moni: Payload as posted in the thread (refer link)
Error in SMQ2: User column:XIISUSER statustext column: Command to tRFC/qRFC: Execute LUW again

401 - Unauthorized error in Value Mapping Replication scenario

Hi,
I'm trying to push some Value Mapping replication data from one of the clients (which is a non-Integration Server) of XI system to IS. When I execute the program which calls the outbound proxy, the XI message fails with the error HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorised.
As given in SAP help, I registered the inbound java proxies and generated the outbound proxies. I confiured the receiver channel with path /MessagingSystem/receive/JPR/XI. In authentication data, I tried several users such as XISUPER, XIAPPLUSER, XIISUSER..Still I get the same error.
What is missing/wrong?
Thanks in advance
Praveen Sirupa

Hi Praveen,
Could you pls do the following...just for verification....
enter the url http://<was_server>:5<sysnr>00/MessagingSystem/receive/JPR/XI
and when it asks for authentication give the XIAPPLUSER and password...you should get an xml that looks like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>
Thanks,
Renjith

XI Value Mapping Replication JPR Error

Hello together,
I am trying to insert items from a csv-file into XI Value Mapping by using the XI adapter. Mapping and configuration is finished, the file is picked by file-adapter and comes through the mapping. In the SXMB_MONI the message is processed correctly, but in the RWB I get the following error:
"Runtime exception during XML parsing: Error parsing document. Exception: Generic Exception: com.sap.aii.proxy.xiruntime.core.XmlProxyRuntimeException: InvocationTargetException when calling method com.sap.xi.xI.system.ValueMappingReplicationItem_Type$Operation_Type.fromValue: insert is not among the enumerated values."
Do you have any idea, what the problem is?
Thank you very much in advance!
Kind regards,
Fred

What is the receving adapter?
It would be worth extending the trace file to get a better handle on the error.
Traces are used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments at class and method level. This is done with the help of the log configurator service:
     Services
     Log Configurator
     Locations
     Choose the location (Java package) and the tracing level (severity)
(for example, com.sap.aii.adapter.file)
     Root Location > com > sap > aii > File
     Set the severity and choose Copy Severity to Subtree.
Depending on what adapter you are using, determines the root location.
Do this then run the interface again. The trace file will provide the specific error causing the problem.

Raising error from Value Mapping

All,
We are using value mapping for a particular field in our messages. The value mapping table does have entries for most of the entries.
Is there a way to raise an error - when the runtime gets a value that is not defined in the value mapping table?
Thanks.

Let me also explain what we are trying to do. probably that will help in getting a better or easier solution.
we are using the value mapping mass replication, where in we get the whole translation table into the cache and use it in our application. This table is pushed from R/3 using a report/proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
I was worried that what will happen, if for some reason the cache is cleared during a restart or something. All the value mappings will fail - till the time the data is sourced again from the R/3 system - right? (we are currently having the R/3 proxy push the translation data every 12 hours or so, but was worried about the time in between).
Thanks.

Error in Domain value mapping.

Dear all,
I was trying a simple file to file scenario using ESB with the Domain value mapping(DVM).
I was trying to replace the incoming long state codes with the short keywords.
I was using the DVM to configure the field to be changed in the XSL map.
I have also configured tracking fields for Routing service and the Outbound adapter in the ESB Console.
But after the instance the long names are not replaced with short keywords it come as blank in the place of names.
In the ESB console the RS is tracking the fields and the outbound adapter not. I was using a simle text file which has two columns Andrew, Bangalore delimited by comma and optionally enclosed by space.
Please help me.

Thanks for the reply Chintan,
Yes it is not working, I was doing the esb-customerdvm.pdf sample DVM as specified in the following link
http://www.oracle.com/technology/products/integration/esb/files/esb-customerdvm.pdf
My map also has three columns and I was the specifying Map name, Source column name as "Long" and the target column name as "Short" and the default value as "" in the lookup-dvm function in the XSL stylesheet.
And I have also specified the trackable fields for the Routing service and the Outbound adapter in the ESB Console but after the instance only the RS shows the tracked data and the Outbound adapter doesnot and it shows Nodata.
When I give the Input as the text file with columns Prasath, Chennai in the output file the Prasath is only coming what I expect is Chennai should be replaced by its short name CH but it is not coming like that.
Here I also specify the coding of XSL Stylesheet map.
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="DVMapsInput.wsdl"/>
<rootElement name="Leaf" namespace="http://TargetNamespace.com/DVMapsInput"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="DVMapsOutput.wsdl"/>
<rootElement name="Leaf" namespace="http://TargetNamespace.com/DVMapsInput"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:imp1="http://TargetNamespace.com/DVMapsInput"
xmlns:ns0="http://www.w3.org/2001/XMLSchema"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/DVMapsInput/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/DVMapsOutput/"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/file/"
exclude-result-prefixes="xsl plt pc imp1 ns0 jca ns1 hdr tns bpws ehdr hwf xp20 xref ora ids orcl">
<xsl:template match="/">
<imp1:Leaf>
<imp1:C1>
<xsl:value-of select="/imp1:Leaf/imp1:C1"/>
</imp1:C1>
<imp1:C2>
<xsl:value-of select='orcl:lookup-dvm("Citycode","Long",/imp1:Leaf/imp1:C2,"Short","")'/>
</imp1:C2>
</imp1:Leaf>
</xsl:template>
</xsl:stylesheet>
Please help on this.
Thanks.

Agency error on Value Mapping in 7.1.

Hi,
I'm facing a problem with value mapping using message mapping. The problem is that i can only choose as a Source/Target Agency the SenderParty/ReceiverParty but I can not use sender/receiver business system .
Does anyone knows why? I'm using as Agencies the bussines system, so when I use the Party, the mapping program trhows an exeption.
Thanks in advance,
Ariel

Ok, Problem Solved.
I Used SenderService ; ReceiverService insead of SenderParty; ReceiverParty.
Cheers,
Ariel

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1        TenderPickup
2        TenderLoan
7        TenderPickup
101     TenderPickup
102     TenderLoan
107     TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

Strange Data Mapping Errors after SEM 6 Upgrade. Please assist.

Hi All, I encountered these sudden Mapping errors after I tried to do Testing in Post Upgrade Sand Box. Here I am trying to to perform Collected Reported Financial Data under Data Collection Method for a particular Company Code 3040. Kindly help me with some quick responses as this is kind of high priority. The errors and the Diagnosis Notes I am unable to follow as I do not where I shall write those Mapping Rules they are referring to. I do not even know if that need to apply any SAP Notes as such. Once again Highly appreciate your quick response and Many Thanks in Advance.
Regards, BIP
Input conversion for field Period Value LC has invalid format Message no. UCT8210 Diagnosis The mapping rule for target field Period Value LC contains a move with a selected Input Conversion indicator. Therefore, the system performs an input conversion prior to creating the target data. However, an error in the input conversion occurred while moving the source key figure to the target key figure Period Value LC. This means that the format used for the input conversion is incompatible with the target data. System Response The system will not perform the move. Procedure Examine the mapping rule for field Period Value LC. Either select the Conversion Exit indicator or deselect the Input Conversion indicator. Execute the method again. -
3040 is incompatible with input format for field /1FB/COMPANY Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field /1FB/COMPANY from the mapping rule for the target field. 3040 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field /1FB/COMPANY. However, the value 3040 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 3040 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field /1FB/COMPANY. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field /1FB/COMPANY. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field /1FB/COMPANY. If incorrect values were selected, make sure that the mapping rule used by source field /1FB/COMPANY has been defined correctly. If the mapping rule is correct and value (3040) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 3040 for field /1FB/COMPANY and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field /1FB/COMPANY, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field /1FB/COMPANY is unsatisfactory: You can define a source selection for field /1FB/COMPANY in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field /1FB/COMPANY. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule. -
Cannot derive the source selection from target field Version Message no. UCT8252 Diagnosis Field Version has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Version. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Version. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Versionthrough mapping), choose one of the alternatives below: Change the mapping rule for field Version so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Version. -
Cannot derive the source selection from target field Group Currency Message no. UCT8252 Diagnosis Field Group Currency has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Group Currency. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Group Currency. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Group Currency through mapping), choose one of the alternatives below: Change the mapping rule for field Group Currency so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Group Currency
1 is incompatible with input format for field FISCPERIOD Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field FISCPERIOD from the mapping rule for the target field. 1 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field FISCPERIOD. However, the value 1 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 1 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field FISCPERIOD. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field FISCPERIOD. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field FISCPERIOD. If incorrect values were selected, make sure that the mapping rule used by source field FISCPERIOD has been defined correctly. If the mapping rule is correct and value (1) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 1 for field FISCPERIOD and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field FISCPERIOD, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field FISCPERIOD is unsatisfactory: You can define a source selection for field FISCPERIOD in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field FISCPERIOD. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule
Input must be in the format ___,___,__~ Message no. 00088 Diagnosis Your entry does not match the specified input format. System Response The entry in this field was rejected. Procedure The entry must comply with the edit format. The following edit format characters have a special meaning: "_" (underscore) There should be an input character at this point; this should be a number for numeric fields. "." (decimal point) (applies to numeric fields) The decimal point occurs here (setting in the user master record). "," (thousands separator) (applies to numeric fields) This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma. "V" (applies to numeric fields) The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space). "~" (tilde) (applies to numeric fields) As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position. All other characters have their normal meanings and must be entered in the same position as in the edit format.

Hi Dan,
Could you Kiindly advise me where we need to write the Mapping Rules in Consolidation Monitor? All he time the errors refering to Mapping Rules. The only Tab I seen "Mapping" is in Data Basis But as per my Understanding Iwe do not have much to do there as it is system generated Mapping Tab.
Where we actually go and select/deselct those Input Conversion Indicator/ Conversion exit Indicator.
Highly appreciate your advise.
Thanks and Regards,
BIP

Value mapping in xslt mapping

Hi,
I have 2 mapping program one is main .xsl program and other one is value mapping program .xsl .
I have zipped both the program and imported into Imported archive in IR but while testing in interface mapping i am getting error.
error:could not compile xslt stylsheet.
Some of the interface having one .xsl program and value mapping is also defined in the main program itself,these interface i am able to execute successfully but unable to execute wherever there are 2 program (main prog + value mapping).
It seems that value mapping is not loading / executing.
Can anyone please guide me how to call value mapping using xslt mapping?
Thanks,
Subbu

Hi Prateek,
Thanks for the response.
Yes i have 2 program and both needs to execute in one interface mapping.
First program (main) is MappingMOAPS_SAVEMULTIPLE2013.xsl and second program i.e (value mapping) MO_vmf.xsl.
From main program itself value mapping program is called.
Please look below code for main & value mapping prog.
In main prog this is the parameter (<xsl:import href="MO_vmf.xslt"/>) where value mapping prog name is mentioned.
I have already zipped and imported but while testing in interface mapping it is giving error that "could not compile xslt stylsheet".
Could you plaese tell how to check or make XSL to accommodate multiple mappings?
Main mapping : MappingMOAPS_SAVEMULTIPLE2013.xsl --
<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:vmf="http://www.altova.com/MapForce/UDF/vmf" exclude-result-prefixes="vmf xs xsi xsl">
     <xsl:import href="MO_vmf.xslt"/>
     <xsl:output method="xml" encoding="UTF-8" indent="yes"/>
     <xsl:template match="/PPR">
          <MOAPS_SAVEMULTIPLE201>
               <IDOC>
                    <EDI_DC40>
                         <xsl:for-each select="SI_ID_IDOCS">
                              <xsl:for-each select="ID_TABNAM">
                                   <TABNAM>
                                        <xsl:value-of select="."/>
                                   </TABNAM>
                              </xsl:for-each>
                         </xsl:for-each>
                         <xsl:for-each select="SI_SP_SAP_PARTNER_INFO">
                              <xsl:for-each select="SP_MANDT">
                                   <MANDT>
                                        <xsl:value-of select="."/>
                                   </MANDT>
                              </xsl:for-each>
                         </xsl:for-each>
                         <xsl:for-each select="SI_ID_IDOCS">
                              <xsl:for-each select="ID_DIRECT">
Value mapping : MO_vmf.xsl:
<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:vmf="http://www.altova.com/MapForce/UDF/vmf" xmlns:xs="http://www.w3.org/2001/XMLSchema" exclude-result-prefixes="xs xsi xsl">
     <xsl:template name="vmf:inputtoresult">
          <xsl:param name="input"/>
          <xsl:choose>
               <xsl:when test="$input='01'">
                    <xsl:value-of select="'PM1C'"/>
               </xsl:when>
               <xsl:when test="$input='02'">
                    <xsl:value-of select="'PM2C'"/>
               </xsl:when>
               <xsl:when test="$input='03'">
                    <xsl:value-of select="'EXT3'"/>
               </xsl:when>
Regards,
Subbu

Value Mapping error

Similar Messages

Maybe you are looking for