Value Mapping replication from SAP

Hi
I have gone thru the Blogs and threads related to value mapping replication from SAP.
Inmy observervation http://sap.com/xi/XI/System of SAP BASIS 7.00
still I have some doubts...
1)what is the differnce between ValueMappingReplication(Asynchronous) and ValueMappingReplicationSynchronous .
when we will use them.
2) Message type ValueMappingReplication contains Operation ,GroupId,Context,scheme,agency.
what is the meaning of Operation??
what is the use of group ID??
is this necessary to maintain all these values in Ztable and also source and target values ?? and use them in Abap aproxy logic??
3) is there any Message Mapping Needed.?? and Interface Mapping Needed to implement value Mapping replication??
but in this blog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1301i [original link is broken] [original link is broken] [original link is broken] didnt find any interface mapping .
4)what is the Sender Adapter type ??
5) if I did replication from SAP..can I see the details in ID
please guide me
regards
munna

hi
1)what is the differnce between ValueMappingReplication(Asynchronous) and ValueMappingReplicationSynchronous .
In sync you will get the value mapping replication status back and in async you won't. In sync based on the response u can update again in case of any failure. If data size is large use async.
2) Message type ValueMappingReplication contains Operation ,GroupId,Context,scheme,agency.
what is the meaning of Operation??
The operation that you are going to perform. Below is the operations list and the contents to be set in the message for the same
Insert = all fields must be set;
Delete =all fields must be set;
DeleteGroup = fields GroupID and context must be set;
DeleteContext = field Context must be set;
DeleteContextGeneric = Context contains the starting part for the context to be deleted
what is the use of group ID??
Displays the different representations of an object.
A value mapping group is identified uniquely by a GUID.
You can also assign a name to a value mapping group.
is this necessary to maintain all these values in Ztable and also source and target values ?? and use them in Abap aproxy logic??
no. system creates the value mapping table. you can take it frm there. no need of any ztables.
3) is there any Message Mapping Needed.?? and Interface Mapping Needed to implement value Mapping replication??
You will be sending the value mapping data from a sender system. If it can sent in the same format not required, otherwise you will have to.
4)what is the Sender Adapter type ??
Any adapter...depends on the sender system.
5) if I did replication from SAP..can I see the details in ID
You can see it in Cache monitoring in RWB.
for more details refer
http://help.sap.com/saphelp_nw70/helpdata/EN/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
rgds
Arun

Similar Messages

Value Mapping Replication from BPM

Hi,
I'm trying to maintain some value mapping replication data from a BPM. Based on certain steps and their results, a Value Mapping Replication message is sent from BPM. I configured the the receiver as XI system and used the XI channel with java path as mentioned in the help.
Though I can see a checkered flag in SXMB_MONI, I cant see the data in the RWB cache monitoring. When I double click the message, by I dont see the the payload received by the receiver but I see the SOAP envelope with some details. When I execute the scenario from ABAP out bound proxy and the same receiver XI channel, I can see the value mapping data in cache monitoring of RWB.
Whats wrong/missing?
Thanks in advance
Praveen

Somebody help me !!

Value Mapping replication GUID Logic

HI,
We are doing Value Mapping replication from ECC table entries to Pi Runtime Value Mapping cache.
We are generating the Group ID required for Value Mapping from ECC.
Here we are confused with the logic for GUID Generation.
At first I thought the driving factors are -- if there is already an entry for the same Source Agency, Source Scheme, Target Agency, Target Scheme and Target Value then it should go in the same group id, else a new gr id needs to be generated.
However it looks like that is incorrect.
Can somebody help us on what should be the logic for generating group id for Value mapping replication.
We have the scenario where the same source Agency, Scheme ,Value maps to multiple target Schemes... and it is not working if we have different Group ids...
Thanks,
Himadri

> We have the scenario where the same source Agency, Scheme ,Value maps to multiple target Schemes... and it is not working if we have different Group ids...
If you want to have multiple targets, then you have create pairs with unique GUID
like this:
A - 1 GUID X
A - 2 GUID Y
A - 3 GUID Z
The standard value mapping function does not work, when you have multiple targets. It will not return an entry.
You have to create a UDF for this purpose. You need to identify which target do you want to select from different values.
An UDF could look like this extract:
IFIdentifier source = XIVMFactory.newIdentifier(source_context,source_agency,source_scheme);
IFIdentifier target = XIVMFactory.newIdentifier(target_context,target_agency,target_scheme);
IFRequest request = XIVMFactory.newRequest(source,target,sourceValue);
try{
IFResponse response = XIVMService.executeMapping(request);
if (response.countTargetValues() > 0){
String[] targetValues = response.getTargetValues();
// take first value of result
return targetValues[0];
This example is taken from PI 7.1
Edited by: Stefan Grube on Oct 22, 2010 9:32 AM

Value Mapping Replication Vs RFC Lookup API Usage Pros and Cons

Hi Ananth,
Looking at the options you have, Value Mapping Replication might be a better option, because, by going the second route, you are just trying to simulate how a Value mapping replication works in reality.
But, when the VMR framework is readily available, why do we need to simulate it by using Java code?
Moreover, the java code approach will be triggered as many times and the number of messages that are triggered VS the number of times the VMR tables in the Java Runtime gets updated only when there is an entry that is added/modified in the SAP side (Which i feel is less frequent than the frequency of the messages being sent through XI).
Regards,
Ravi Kanth Talagana

Hi,
There are more issues you need to consider here:
1) Is this static data or will it change often (the lookup data);
2) Wether it is a good approach to keep it in middle system? if so who takes the ownership of managing it i.e. update, delete etc from time to time
3) The tables don't seem small to me for value mapping
I am not a big expert but i am off the opinion going RFC way as it will keep loose-coupling in place.
However your issue for not using graphical RFC is not true though, you can pass all your line items as a single object which means only making ONE single call to ECC and then get the return the same way. Think along the lines of internal table as an object
regards,

Value Mapping replication issue

Hi PI Experts,
I am working on the Value mapping replication scenario using Z-table created in R/3 system.
I have configured the value mapping Replication Out Abap proxy.
I am getting the following error :
Audit Log for Message: 4d404b41-39e4-0083-e100-80008b3557e6
Time Stamp Type Description
2011-01-27 07:56:19 Information The message was successfully received by the messaging system. Protocol: XI URL: http://gendevhrcx51.unix.appliarmony.net:54000/MessagingSystem/receive/JPR/XI Credential (User): PIAPPLUSER
2011-01-27 07:56:19 Information Using connection JPR. Trying to put the message into the receive queue.
2011-01-27 07:56:19 Information Message successfully put into the queue.
2011-01-27 07:56:19 Information The message was successfully retrieved from the receive queue.
2011-01-27 07:56:19 Information The message status was set to DLNG.
2011-01-27 07:56:19 Information Java Proxy Runtime (JPR) accepted the message.
2011-01-27 07:56:19 Error JPR could not process the message. Reason: Cannot locate proxy bean ValueMappingApplication.
2011-01-27 07:56:19 Error Delivering the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Cannot locate proxy bean ValueMappingApplication.
2011-01-27 07:56:19 Information The message status was set to WAIT.
2011-01-27 07:56:19 Information The asynchronous message was successfully scheduled to be delivered at Thu Jan 27 08:01:19 CET 2011.
I have followed the threads :
1) /people/udo.martens/blog/2009/04/03/value-mapping-replication-scenario
2) ValueMappingReplication in PI 7.1
3) How to Perform Value Mapping u2013 A Walkthrough -> Sarath Chandra Kandadai
which had similar issue but could not make any headway.
Questions :
1) Are there any specific PIAPPLUSER authorizations required ,I have configured the CC as per the 3rd thread.
2) There is an issue with SLD access when I look at the JPR monitoring,could be the possible reason.
SLD access SLD host:port = gendevhrcx51:54000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for DHX.SystemHome.gendevhrcx51 found
No access to get JPR configuration
I have refered to the Note : 809420 and asked the basis team to look into this.
I am running out of ideas ,request you guys to help on this issue.
Thanks
-Alok

Hi Alok,
i have similar error. Here the error:
30.12.2013 20:40:17.789
Information
Java Proxy Runtime (JPR) accepted the message.
30.12.2013 20:40:17.871
Error
JPR could not process the message. Reason: No remote bean found for reference of class com.sun.proxy.$Proxy352.
30.12.2013 20:40:17.876
Error
Delivering the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: No remote bean found for reference of class com.sun.proxy.$Proxy352.
30.12.2013 20:40:17.911
Information
The asynchronous message was successfully scheduled to be delivered at Mon Dec 30 20:45:17 CET 2013.
I have registered the inbound interfaces:
http://sap.com/xi/XI/System#ValueMappingReplication = localejbs/sap.com/com.sap.xi.services/ValueMappingApplication:valueMappingReplication
http://sap.com/xi/XI/System#ValueMappingReplicationSynchronous = localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous:valueMappingReplicationSynchronous
2 interfaces found
But somehow the bean is not found and gave me the error :
JPR could not process the message. Reason: No remote bean found for reference of class com.sun.proxy.$Proxy352.
Can you tell me in detail what you have done to resolve the problem? I send the test data from soapui using the outbound interface ValueMappingReplicationOut provided by the content in SAP BASIS 7.11.
Thanks,
Ly-Na

Value Mapping Replication

Hi,
I'm having issue in value mapping replication and seeking help to fix it....following is my config in place:
1. Created java out proxy and registered it
http://host:port/ProxyServer/register?
ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.se
rvices/ValueMappingApplication&method=valueMappingReplication
2. Configurations in place in ID
3. Activated the Outbound ABAP proxy and triggered the call from report program
No errors reported from the client abap proxy, yet, when checked in RWB i'm unable to view the VM table in cache monitoring....not sure where the error is.
Is it required to register the JAR file as generated during the step# 1 in J2EE visual Admin? else is there something I overlooked?

> No errors reported from the client abap proxy, yet, when checked in RWB i'm unable to view the VM table in cache monitoring....not sure where the error is.
Check monitoring for adapter framework for errors.

Error - 403 - Value mapping replication - not authorized

Hello Experts,
I tried to implement the value mapping replication in PI 7.1as per the below article.
"http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07dd2ae-f783-2c10-9aa6-ca69f67dd20f"
As given in the article i have configured everything in Integration Directory.
I have tried the same thing but getting the following error in "call adapter step" after sending the XML from soap client.
"&nbsp;&nbsp;You are not authorized to view the requested resource."
I am able to find 2 error messages in SXMB_MONI.
i think this is an issue with user details in XI channels.
Please let me know what is the issue,user we have to give in XI receiver channel andwhat ROLE one should have to test the scenario.
Many thanks.
Regards,
Harish

Hi Hareesh,
Can you try to use the RFC/ communication user in the communication channel and try?
Please check the authentication type also, check if you will require non-sap type or sap type.
Thanks,
Hetal

Value Mapping Replication - 7.31

hi,
 working on a requirement of value mapping replication on 7.31 environment.
 I have used the standard - ValueMappingReplication service interface as the receiver as it is an async scenario.
 My sender structure is similar to the ValueMappingReplication. I am using a SOAP UI to hit the PI server. I have downloaded the WSDL from the ID and used it as a request.
So it is basically a soap sender ( from SOAP UI ) to SOAP Receiver - async. - I am using Transport Protocol - HTTP and Message Protocol - X13.0
I have registered the URL -http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
--- how do i hit the Java proxy servlet ? to update the data on PI runtime cache?
- wht url should i use ? -/MessagingSystem/receive/JPR/XI/http://<Server>:<Port>/ - is this correct ?

Hello,
Use this URL in SOAP receiver channel
http://<host>:<port>/MessagingSystem/receive/JPR/XI
Thanks
Amit Sriavstava

Value Mapping Replication for Mass Data

Hi SDN,
I have to design an interface in XI 3.0 (SP14 on AIX) for replicating mass data from file databse etc to the XI runtime cache.
I went thru the follwing weblog which proved to be helpful:/people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
ValueMappingReplicationOut being my Asynchronous outbound interface and ValueMappingReplication being Asynchronous Inbound Interface of in the software component SAP BASIS, software component version SAP BASIS 6.40 in the namespace http//sap.com/xi/XI/System.
Am aware that for this scenario the receiver is predefined (it must be on the Integration Server).
My question here is how do i use the outbound interface to send data to XI. I mean in my case i have a file and SQL server as the sender.
Can somebody detail the steps involved. Suppose i dont want to use ABAP proxy or JAVA proxy HTTP adapter sending the message,
Do i have other options to send data to XI value mapping interface?
Regards,
Vineet

When you want to send data from a file, just map the structure from the arriving XML to ValueMappingReplication. There is no need for using the interface ValueMappingReplicationOut or use an ABAP proxy.
Regards
Stefan

Value mapping replication - groupid format

i am trying to use value mapping replication with the synchronous interface.
i generated an abap proxy and wrote this abap program:
REPORT z_value_mapping_proxy.
TYPES: BEGIN OF ty_lfa1,
 lifnr LIKE lfa1-lifnr,
 name1 LIKE lfa1-name1,
 END OF ty_lfa1.
DATA : obj_ref_sync TYPE REF TO zco_value_mapping_rep_out_sync,
 wa_output TYPE zvalue_mapping_replication,
 gt_lfa1 TYPE TABLE OF ty_lfa1,
 gs_lfa1 TYPE ty_lfa1,
 gs_item TYPE zvalue_mapping_replication_itm,
 lr_root TYPE REF TO cx_root.
START-OF-SELECTION.
SELECT lifnr name1 FROM lfa1 UP TO 100 ROWS
 INTO TABLE gt_lfa1.
LOOP AT gt_lfa1 INTO gs_lfa1.
 CONCATENATE gs_lfa1-lifnr '_to_' INTO gs_item-group_id.
 CONCATENATE gs_item-group_id gs_lfa1-name1 INTO gs_item-group_id.
 gs_item-identifier-agency = 'SEA2'.
 gs_item-identifier-scheme = 'urn:source:vcode2'.
 gs_item-identifier-value = gs_lfa1-lifnr.
 gs_item-operation = 'Insert'.
 gs_item-context = 'http://sap.com/xi/XI'.
 APPEND gs_item
 TO wa_output-value_mapping_replication-item.
 gs_item-identifier-agency = 'REA4'.
 gs_item-identifier-scheme = 'urn:target:vname4'.
 gs_item-identifier-value = gs_lfa1-name1.
 gs_item-operation = 'Insert'.
 gs_item-context = 'http://sap.com/xi/XI'.
 APPEND gs_item
 TO wa_output-value_mapping_replication-item.
ENDLOOP.
LOOP AT wa_output-value_mapping_replication-item INTO gs_item.
 WRITE: / gs_item-group_id, gs_item-identifier-agency,
 gs_item-identifier-scheme , gs_item-context.
ENDLOOP.
TRY.
CREATE OBJECT obj_ref_sync
EXPORTING
 LOGICAL_PORT_NAME =
CATCH cx_ai_system_fault .
ENDTRY.
TRY.
CALL METHOD obj_ref_sync->execute_synchronous
 EXPORTING
 output = wa_output
IMPORTING
 INPUT =
CATCH CX_AI_SYSTEM_FAULT .
CATCH ZCX_VALUE_MAPPING_REPLICATIONF .
CATCH CX_AI_APPLICATION_FAULT .
ENDTRY.
COMMIT WORK.
in xi monitor i get the message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="JAVA_PROXY.">APPLICATION_FAULT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/XI/System">ValueMappingReplicationFault</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and inthe aplication logViewer, in the log defaultTrace.trc, i get the message:
Error processing inbound message. FaultException: com.sap.xi.xI.system.ValueMappingReplicationFault_Message_Exception: <ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System"><standard><faultText>The GroupID 0000000001_to_Forks Manufacturin in item 0 has wrong format. Details: null</faultText><faultDetail><text></text><id>4</id></faultDetail></standard><addition><ItemNr>0</ItemNr><Item><Operation>Insert</Operation><GroupID>0000000001_to_Forks Manufacturin</GroupID><Context>http://sap.com/xi/XI</Context><Identifier scheme="urn:source:vcode2" agency="SEA2">0000000001</Identifier></Item></addition></ns:ValueMappingReplicationFault><ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System"><standard><faultText>The GroupID 0000000001_to_Forks Manufacturin in item 0 has wrong format. Details: null</faultText><faultDetail><text></text><id>4</id></faultDetail></standard><addition><ItemNr>0</ItemNr><Item><Operation>Insert</Operation><GroupID>0000000001_to_Forks Manufacturin</GroupID><Context>http://sap.com/xi/XI</Context><Identifier scheme="urn:source:vcode2" agency="SEA2">0000000001</Identifier></Item></addition></ns:ValueMappingReplicationFault>
does anyone know what the problem can be?
is there a specific format for groupid?

Hi,
You can use FM GUID_CREATE and use 32 digit GUID.
Regards,
Sudharshan N A

Value Mapping Replication - Issue - Authorization Error

Hi all,
I am trying to do value mapping replication of the data from a table in ECC system using an outbound proxy on ECC and ASync Inbound interface on XI - valuemappingreplication.
Steps followed:
1. Created Table Stucture and did write a report to extract the data from the table in ECC to send the data through Outbound proxy.
2.Followed this blog - Value Mapping replication
When tried to execute the scenario after all the steps in the above blog, we have an error in sxmb_moni saying that the authentication failed. I used pisuper, pidiruser in the receiver communication channel
3.Generated a Java Proxy for the valuemappingreplication interface.
4.Tried to deploy the .jar from the above step using SDM, I was not able to deploy it.
reg
Edited by: naveen chitluri on Jul 16, 2008 12:55 PM

All,
For the value mapping replication,
I have tried to send the message to URL directly for RWB, Test Message in the Component Monitoring http://server:50400/MessagingSystem/receive/JPR/XI.
I am getting an error saying that:
Delivery of the message to the application using connection JPR failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered: com.sap.aii.proxy.xiruntime.core.XmlRecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered
Can anyone throw some light on this.
reg

401 - Unauthorized error in Value Mapping Replication scenario

Hi,
I'm trying to push some Value Mapping replication data from one of the clients (which is a non-Integration Server) of XI system to IS. When I execute the program which calls the outbound proxy, the XI message fails with the error HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorised.
As given in SAP help, I registered the inbound java proxies and generated the outbound proxies. I confiured the receiver channel with path /MessagingSystem/receive/JPR/XI. In authentication data, I tried several users such as XISUPER, XIAPPLUSER, XIISUSER..Still I get the same error.
What is missing/wrong?
Thanks in advance
Praveen Sirupa

Hi Praveen,
Could you pls do the following...just for verification....
enter the url http://<was_server>:5<sysnr>00/MessagingSystem/receive/JPR/XI
and when it asks for authentication give the XIAPPLUSER and password...you should get an xml that looks like this...
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>
Thanks,
Renjith

Value mapping access from XI module adapter

Hi,
is it possible to access a value mapping from an XI module adapter?
Thanks
Yann

hi
1)what is the differnce between ValueMappingReplication(Asynchronous) and ValueMappingReplicationSynchronous .
In sync you will get the value mapping replication status back and in async you won't. In sync based on the response u can update again in case of any failure. If data size is large use async.
2) Message type ValueMappingReplication contains Operation ,GroupId,Context,scheme,agency.
what is the meaning of Operation??
The operation that you are going to perform. Below is the operations list and the contents to be set in the message for the same
Insert = all fields must be set;
Delete =all fields must be set;
DeleteGroup = fields GroupID and context must be set;
DeleteContext = field Context must be set;
DeleteContextGeneric = Context contains the starting part for the context to be deleted
what is the use of group ID??
Displays the different representations of an object.
A value mapping group is identified uniquely by a GUID.
You can also assign a name to a value mapping group.
is this necessary to maintain all these values in Ztable and also source and target values ?? and use them in Abap aproxy logic??
no. system creates the value mapping table. you can take it frm there. no need of any ztables.
3) is there any Message Mapping Needed.?? and Interface Mapping Needed to implement value Mapping replication??
You will be sending the value mapping data from a sender system. If it can sent in the same format not required, otherwise you will have to.
4)what is the Sender Adapter type ??
Any adapter...depends on the sender system.
5) if I did replication from SAP..can I see the details in ID
You can see it in Cache monitoring in RWB.
for more details refer
http://help.sap.com/saphelp_nw70/helpdata/EN/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
rgds
Arun

How to achieve transport of value mapping replication cache table values ?

During the migration of our interface from XI3.0 to PI 7.11,
I need to transport the value mapping replication cache table values present in cache monitoring of runtime workbench in
XI 3.0 PRD to PI 7.11 DEV .
Please let me know the ways to acheive this so that I can have the same values present in PI 7.11 Value Mapping Cache table as maintained in XI 3.0.
Please point me into correct direction.
Regards
PS

Click on "Tools" option, select "Export Configuration Objects" -> "Individual Objects" -> Choose the "Value Mapping Group" type, and then select the value mappings you want to transport.

ABAP program and FB for value mapping replication

Hi,
we are using a 40B system and I want to use the value mapping replication in XI. To refill the data into the XI database I must write an ABAP and a function module to transfer the data out of R/3 into XI (via RFC). Has anybody an example how the program (and the FB) must look like? i.e I want to read table mvke and extract the materialnumber and the prodhierarchy.
Thanks and best regards
Arnold

Hi Arnold,
First you need a table type with a structure like follows:
operation
groupid
context
identifier
agency
scheme
(corresponding to the Interface ValueMappingReplication)
All used data elements should have type string or charXX
for example: operation - char10, groupid - char32, rest - char120
Next you create a function module with attribute 'remote-enabled module'.
The import parameter is your new table structure.
Next you create an ABAP program. Here an example:
report z_value_mapping .
tables mvke.
data:
p_value_mapping type zvalue_mapping,
p_value_mapping_table type zvalue_mapping_table.
p_value_mapping-operation = 'Insert'.
p_value_mapping-context = 'http://xi.com/Material'.
select * from mvke where matnr between '170' and '501'.
check not mvke-prodh is initial.
* Create a value mapping group to join two entries.
* use a unique 32 digit number.
concatenate '00000000000000' mvke-prodh into p_value_mapping-groupid.
translate p_value_mapping-groupid using ' 0'.
* Store the mapping source as first entry to the group
p_value_mapping-identifier = mvke-matnr.
p_value_mapping-agency = 'SenderAgency'.
p_value_mapping-scheme = 'MATNR'.
append p_value_mapping to p_value_mapping_table.
* Store the mapping target as second entry to the group
p_value_mapping-identifier = mvke-prodh.
p_value_mapping-agency = 'ReceiverAgency'.
p_value_mapping-scheme = 'PRODH'.
append p_value_mapping to p_value_mapping_table.
endselect.
* Push data to XI
call function 'Z_VALUE_MAPPING' in background task
destination 'IS_XID'
exporting
value_mapping = p_value_mapping_table.
commit work.
Import the RFC to the Integration Builder, create a mapping between your RFC and the interface ValueMappingReplication.
Check this Blog for additional steps:
/people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
Choose names for context, agency and scheme which are useful your scenario.
Regards
Stefan

Value Mapping replication from SAP

Similar Messages

Maybe you are looking for