Value Mapping Transport Problem
Hi All,
I hv some value Mapping Values in my XI Devvelopment system while i am transporting these values to the XI Quality System all Development values are able to transport but,some values are duplicating.aferter that
In XI Production System newly added values are not transported eventhough imported Sucessfully.
I was tryed two transport systems i.e CMS & File System.
Plz, help me to solve this is....
Thanks
Mahesh
Hi Mahesh,
while value mapping make sure that u refresh the run time cache
in value it uses another table that which helps in value mapping
make sure that even that table is imported if any doubt pls chk this link
value mapping uses values from the cache so you can you value
mapping replication for your purpose - but you will not
see those values from ID
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
/people/sukumar.natarajan/blog/2006/10/23/accessing-value-mapping-defined-in-directory-using-java-functions
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
if found worth pls do reward points
Thanx
Sampath
Edited by: venkata sampath on May 29, 2008 11:15 AM
Similar Messages
-
Value Mapping causing problems in Adapter Engine?
Hello, I was hoping someone might be able to help me with a problem we are having in our XI system. I created a new value mapping group that has N:1 values. There are about 80 different values that I convert to 1 value. I have been using 1:1 value mappings successfully and I tested out the N:1 scenario just fine also. However, at the time I activated this new value mapping group, all of my resulting messages in the adapter engine are being held in a status of 'To Be Delivered'. There are no errors in the RWB and the BASIS admin cannot find any errors in the J2EE logs. Does any one have any ideas on possible causes for this condition?
This problem has been corrected by a restart of the J2EE engine. Still not certain what the root cause was, but this is the second time a restart has fixed a problem coinciding with a value mapping group object activation.
-
How to put identical target value in value mapping table
Hi all ,
I am implementing a value mapping function .Problem is occuring for repetated target value.for ex: if key is GL001 GL002 GL003 and destination value is 4 5 4 then its creating problem for identical values i.e for both GL001 & GLOO3 its not accepting 4 .Same manner for many diffrent glncode i have identical values.not understanding how to deal with these identical values please guide me as its very urgent.
Regards,
SaurabhHi saurabh,
you can try this out....
First you create a value mapping table in ID like:
AWSYS GLNCODE
GLOO1 10
GLOO2 20
(without GLOO3).
now in your message mapping do the following mapping:
Contant[GLOO1]
|
|(then)
AWSYS-------------> equals---->if----------------->Value Mapping---->GLNCODE
| |(else)
| |
Constant[GLOO3]-----| AWSYS
**Reward points if helpful...
--Sankar Choudhury -
Value Mapping Problem - Values not appearing in destination system
hello everyone,
Here's my scenario: XML > XI > IDOC
I have a problem with the ValueMapping and FixedValue function in XI. When I test the message in the Integration Repository, I don't get any problems (the value is converted appropriately), but when I view the IDOC in SAP, the value that is supposed to be in the field is missing.
When I check the payload in SXMB_MONI in XI, no conversion occurs. I have refreshed the caches, and everything seems to be fine. I don't know why the value mapping functions seem to have stopped working altogether. Will anyone be able to help me out with my problem?
Thanks in advance!
GlennHi Glenn Bumanlag,
I think the values that you have given for source values (Agency and scheme)
and Target values (Agency and scheme) may be mismatching so kindly chek that...even i got the same error in the past..........
If you the this problem kindly change it accordingly and also refresh the cache once you that with this.........
Kindly follow the below mentioned link and check if you have followed these steps.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5
Thanks
Sai
PS: kindly reward points if helpful -
Problem in value mapping in POSDM configuration!
Hi Experts,
I am sending data from POS to POSDM. I hav used standard name spaces like GM store Connectivity, BI and Store Connectivity 2.0. I hav also done settings in ID . Made a File adapter and RFC adapter and RD, ID, SA and RA settings.
Data from Sourse: GMTLogTransaction_out is going to the RFC :/POSDW/CREATE_TRANSACTIONS_EXT .
So I hope users can Understand I hav used standard mapping.
Now the issue is in the source structure a perticular field called TENDER ID is mapped with Target Field :Tender Code.
But there is a value mapping in between.
The name of the source Agency is IXREtailPOSLogRetailTransactionTenderID and schema is IXRetailPOSLogRetailTransactionTenderIDSchema and
The name of the Target Agency is POSDWTENDERTYPECODE and schema is POSDWTENDERTYPECODESCHEMA.
And the Value mapping Context is : http://sap.com/xi/XI.
The problem is I can see this , but I cant assign any value as it is in disabled mode in Messege mapping.
Again In the ID I cannot see this Value mapping , which I expected to see and maniputale.
experts, please tell me hw to I use this manipulate / incert some values so taht the input when 01 becomes 3101 at output.
If any doubts/ querioes, pls revert back.Please note , I am using all standard components in IR.
Regards,
Arnab .Hi Arnab / Abhijith,
I am also going to work on the similar kind of requirement which u guys have worked.
Pos( third Party)->PI>POSDM-->IS-Retail ( Inbound)
IS-Retail-> PI->POS( third Party) ( Outbound)
Appreciate if you could help me with some clarifications..
1) What transactions we can update to POSDM..?
2) Does we need to POST all POS transactions first to POS DM and then IS-Retail ( Inbound).?
If that is the case, once transactions posted in POSDM, does we need to do any settings to post idocs automatically to Retail system .. (OR) do we need to develop interface again from POSDM>PI>IS-Retail.( please clarify).
Please suggest .. is it feasable to post only Non aggregated data directly to POSDM and Aggregated Sales ,FI , GRNs to directly to ECC.( Based on client requirement ).
Awaiting for your suggestions.. Please suggest the best appraoch
Thanks & Regards,
Suman -
How to achieve transport of value mapping replication cache table values ?
During the migration of our interface from XI3.0 to PI 7.11,
I need to transport the value mapping replication cache table values present in cache monitoring of runtime workbench in
XI 3.0 PRD to PI 7.11 DEV .
Please let me know the ways to acheive this so that I can have the same values present in PI 7.11 Value Mapping Cache table as maintained in XI 3.0.
Please point me into correct direction.
Regards
PSClick on "Tools" option, select "Export Configuration Objects" -> "Individual Objects" -> Choose the "Value Mapping Group" type, and then select the value mappings you want to transport.
-
Transport of Value Mapping ?
Hi,
I know that if I create a Value Mapping (inside ID) with Agencies equal to a Business System, then I will be able to transport it from DEV to PROD...
But <b>what's happen if AGENCY used in the Value Mapping is NOT a Business System</b> (e.g Agency = My_girlfriend)?
Can be able to transport the Value from DEV to PROD?
or how to do it?
Regards
Mickael
Message was edited by: Mickael HuchetHi,
This thead discussion may help you-(if you did not see)
Export/Import the mapping value used in Value Mapping Function
rgds,
moorthy -
Hi,
I wonder if it is possible to transport a value mapping from Dev->Qa->Prod or if I have to remake it in each system?
Best Regards
ClaesActually, you can transport the value mappings you defined in the Integration Directory. You can find them under Tools -> Export Configuration Objects, select 'Individual Objects' and type 'Value Mapping Group'.
The difficulty is that, if you did not define a group name for your mapping, you will only see object IDs here. -
Cache Problem in value mapping
Hello All,
I have done some changes in the Value mapping table , activated it and checked the cache also , its upto date.I have verified through cache monitoring in run time workbench also..
But when i ran the transaction am not getting the expected result.
Can anybody help me in this issue..Is anyone faced this type of problem?
Regards
VenkateshHi
>In Mapping while doing the Value mapping,in that value mapping what are the names which you maintained under sender schema and sender agency should be the same names while maintaining the value mapping in ID from Menu>Tools-->value Mapping.
-->I think the issue is not with the Cache, and In your communication channels for sender and receiver under IDENTIFIERS tab maintain the Sender schema and sender agency(Names should be same as in IR)for sender Channel and maintain the Receiver schema and Receiver agency for Receiver channel.(Names should be same as in IR).
This might solve your problem and on value mapping search SDN there is simple BLOG given by Praveen Kumar.
Thanks -
Hello,
we want to use the value mapping table in ID with XSLT.
Here is my source:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Source xmlns:ns0="http://comsol-ag.com/xi/rfcxslt">
<CustomerNumber>A</CustomerNumber>
</ns0:Source>
XSLT Mapping:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:trg="http://comsol-ag.com/xi/rfcxslt" xmlns:ns0="http://test/xi/tsts" xmlns:ValueMap="java:com.sap.aii.mapping.value.api.XIVMService">
<xsl:template match="/">
<trg:Target>
<CustomerInfo>
<xsl:variable name="sourceValue" select="ns0:Source/CustomerNumber"/>
<ID>
<xsl:value-of select="$sourceValue"/>
</ID>
<xsl:variable name="response" select="ValueMap:executeMapping('http://sap.com/XI/xi','SourceAgency','SourceScheme',string($sourceValue),'http://sap.com/XI/xi','TargetAgency','TargetSchema')"/>
<Name>
<xsl:value-of select="$response"/>
</Name>
</CustomerInfo>
</trg:Target>
</xsl:template>
</xsl:stylesheet>
Target:
<?xml version="1.0" encoding="utf-8" ?>
<trg:Target xmlns:trg="http://comsol-ag.com/xi/rfcxslt">
<CustomerInfo>
<ID>A</ID>
<Name /> ???????????????????????????????????
</CustomerInfo>
</trg:Target>
But the receiving data is not converted to value table in ID:
Integration Directory Value Table :
http://www.image-load.eu/out.php/i26896_pic1.PNG
Please point out where i m going wrong.
Thanksproblem solved!
-
hi experts,
i am trying to do value mapping.i have done all configuration according to this link
http://sap-xi.com/sap-xi-tutorial-value-mapping.html
but i am not getting the expected results in target file . means the data is not getting changed as per the value mapping.
help me on this .
thanks
Anup
Edited by: anup kumar banerjee on Oct 27, 2011 1:33 PMare you getting any error?
What is the behavior?
do refer this guide - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5?QuickLink=index&overridelayout=true -
Hi All
I am doing a fix value mapping for a perticular field.I am getting a value say Y001 from the client system which i convert it to Z001 in my system. I tested the XML in the message mapping test tab.It is giving proper result.But at the output file i am getting the same value of Y001 instead of Z001.Can anyone please provide any inputs on this.
Thanks
AmitHI,
Please chek the imput values..
Sure if you fix the value in Fix Value mapping then you will get the resukt value otherwise empty.
Please see the below links
value mapping - /people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
Value mapping /people/sukumar.natarajan/blog/2006/10/23/accessing-value-mapping-defined-in-directory-using-java-functions
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards
Chilla.. -
Hi All,
We would like to Move our Value Mappings that have been maintained in DEV to QA system using Export / Import.
Has anybody tried using Export / Import to Move the Value MAps. What is the way to achive this movement of Value Mappings from DEV to QA.
Thanks
ArunHi,
Have a look into this thread-
Export/Import the mapping value used in Value Mapping Function
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
Hope this helps,
Regards,
Moorthy -
Hello Team,
I'm trying to use the Value mapping functionality but is not working for me, all the transaccion failed because of invalid account code. Create the map rule but is not executed. Watching the B1iSN Graphical Design tool i see that i have an error on the Sender ObjectType it said "ValueMappingKeyTable B1.2004_JE does not exist on the B1iSN Repositiry" any idea???GARG23,
I had a same issue.
How did you manually create the B1.2004_JE file?
Could you please show me step by step?
Thansk
Joanne
Edited by: Joanne Lee on Mar 25, 2011 12:37 AM -
Hi all,
I've ceated a value mapping table manually in the IB (Config) using the tool. I also created a VM Group.
However it is not picking up the new values and I can't find the VMG in the RWB Cache either....
Im only dealing with small number of entries so I don't need a mass reproduction...
Any help welcome..
cheers,
Eric> I've ceated a value mapping table manually in the IB (Config) using the tool. I also created a VM Group.
> However it is not picking up the new values and I can't find the VMG in the RWB Cache either....
Hi,
Have you refreshed your cache (CPA & SXI_CACHE)?
Also clear the SLD Data Cache from Intergaration Dirtectory menu "Environment".
Try to run end-end scenario and see in MONI if there are corresponding values from VM. In general it never gives problem in comparsion to VM Replication.
Regards,
Sarvesh
Maybe you are looking for
-
Enforcing a strategy plan to only produce one order in a single month
Hello All, I have created a strategy plan that kicks out orders monthly, quarterly, semi-annually and annually. I have used the cycle unit of "MON", so orders get generated in cycles of 30 days. Everything is working great. Now, here's a business req
-
Function module: why do we use FM and what is the purpose of using FM
hi, Can any please explain. Why do we use FM? What is the purpose of using FM ? Where we are using FM and for what tables in R/3 ? I could be thankful to you if any one
-
Adobe files not opening in outlook
Hello after installing Acrobat XI pro I cannot open PDF files in my email outlook. Can you please advise how to resolve?
-
Users unable to change their interactive reports
What tables and fields control what user can change the report? a bit of history: Due to the terrible bug that plauges apex where user created interactive reports dont get promoted with code changes when promoting from dev to prod environments, we ha
-
Stuck with transposing loop.
I have just imported a loop into my logic song. It is orchestral. I notice it was originally help in the ilife folder but seemed to be available as a loop from the media panel on the arrange window. I was hoping to transpose the region in the inspect