Value miss match

Hi Gurus,
Anyone help me in reportingside.
here i am facing a problem when query execution.I had developed a query on Stock Category satement.In that query i took quantity(0VALSTCKQTY) and value(0VALSTCKVAL).These two are Non-cummulative keyfigures.
Quantity(0VALSTCKQTY)}
Inflow 0RECVALSTCK
Outflow
0ISSVALSTCK
Value(0valstckval)}
Inflow
0RECVS_VAL
Outflow
0ISSVS_VAL
The above menctioned are my infloe and outflow keyfigure in my Non-cummulative Quantity and Value.But my problem is
the Quantity is matching with my R/3 data but value is not matching while qury excution.
Plz helpme anyone.This is high priarity report.I'll assing points.
Thanks & Regards
JT Goud

Hi,
Just check the same in your data target with the same filter conditions as in report.
Means check the quantity in Data Target, if there is same mismatch then it is loading issue. Check the data in RSA3 in source system.
If the Data is matching in Data Target with source Sytem's, then you need to check the filte conditions in the report.
Rgs,
I.R.K

Similar Messages

Auto-reconcilitation Missing matching criteria

Hi,
In oracle apps 11i , manual reconcilation for bank statements is done by the user. On the attempt to try Autoreconciliation program the statement lines had the error"Missing matching criteria " in the AutoReconciliation Execution Report.
I have found in the cash mangement user manual the following:
The statement line needs at least one of the following criteria to
match, and all are missing: 1) transaction number; 2) invoice
number and agent name; 3) invoice number and agent bank
account.
But I do not know how to do any of the 3 points above because the bank statement lines entered either manually or uploaded through the interface consist of the following information only:
POST DATE, VALUE DATE , DR AMOUNT , CR AMOUNT,and BANK TRANSACTION CODE
What do we have to do to use the auto-reconciliation program?

Hi,
We can request bank to provide us information of Transaction number.
Say a Cheque pmt or receipt is cleared by the bank, the reference of Chk is captured by Bank. These numbers shall be available to you on request along with Bank Transaction Code.
Regards
Sridhar

FS10N Balance Miss match

Hello,
On the Date 31.03.2010 I gave taken a report from FS10N for my Bank Gl. But now I have again run the report, and I am getting different value for that particular date.
Example - 31.03.2010 *** Balance. 100 Rs.
Now I have again run the FS10N, its shows 31.03.2010 *** Balance 120 Rs.
As a result the balance is miss match. Can you please tell me the reason?
Thanks

Hi,
Please check if you have included any other documents for that period.
Double click on the total and check the same in FS10n.
The other reasn could be, if you have not carried forward the balances from the previous year to this year, the balances will mmismatch.
Please check if you have carried the year end closure in f.16.
Hope this helps,
Thanks,
Shilpa.

Quantity Miss match -REM

Hi,
This is Repititve Manufacturing.
After creation of basics (BOM,Rate routing etc), I have done standard cost run, Marked & Released.
Then Backflush is done for the Header material and material document posted several times.
When I Validate the quantities in CK13N with Material document MB03, I'm getting quantity miss match for the components of type Packaging.
In BOM, the quantity of the component is 14000 for which header's base qty is 1000.
The component has scrap of 2.2%.
I did backflush for header of 100 qty.So the component including the scrap it came 1430.8 i.e 1431.
It is getting rounded off to 1431 in material document & during backflush because of its UOM - EA.
But when I'm validating in CK13N by selecting User Entry and providing 100 qty for Header, it shows 1428.56 for the same component.
Kindly help me in solving this.
Regards,
Sankar.N

Hi,
Are you using separate costing BOM.Coz looking at your scenario either it should consider scrap or not. Means it could hv value either 1400 or 1431.But, the value which you are getting is different.Whats the costing lot size & price unit in accounting view?

Mapping Mapwthdefault at tiem level -Values Missing in Queue context

Here is the logic
If (E1EDP19-IDTNR_EXTR is not empty and (E1EDP19-QULF)=001
map IDT_EXTR to target Buyerpart
else
    if E1EDP19-IDTNR is empty and E1EDP19-QULF=002
if E1EDP01-MENEE IS NOT EQAUL TO AU
map const (SEE_DESCRIPTION) to target
All context set to EDP01
Target is mandatroy field
1) data : If the 1st item level has the value IDTNR_EXTR and 2nd item level is not .
In the else condition also QUALF is not matching to 002 so not getting the value for else condition in second item level .
So getting the error ItemDetail[2]/ns0:BuyerPartNumber. Values missing in queue context
How can we add mapwithdefault to not to fail for mandatory field
2 data I added mapwithdefault befoe else it worked for this data but failed for other test with 3 line items IDTNR_EXTR values. 2nd line item was getting in target which is not
Thanks for your help

Here is udf i tried but not working as expected
String output = new String();
for (int i=0; i< qualf.length;i++)
if(qualf[i].equals("001")&&(idntex[i]!=("")))
      output = idntex[i];
    else
     if((qualf[i].equals("002"))&&(idtnr[i]==(""))&&(manee[i]!=("AU")))
             output = ("Notes") ;
     result.addValue(output);
if item has only one value of idtnext and 2nd line item also it is displaying same value it should be blank
Thanks for your help

Report miss match error

hi guys,
Can anyone tell me what is the easiest way to find out Report miss match error of bi with r3 report especially in fi.
thanks in advance,
regards,
Bunty.

lots of ways we can do that.Check your reconciliation reports at your organistaion , then you will get an idea how they compare each time otherwise in general everybody copies data in excel and want to compare.

Cannot create target element /Invoice. Values missing in queue context.

Hi Experts,
I am working on Idoc to File scenario using SAP PI 7.1. In this scenario I am mapping Invoic02 Idoc with Invoice xsd. I am able to test the mapping in ESR with status as success.
In ID Tools --> Test Configuration I used the same payload and tried testing the configuration step by step. while executing I am getting an error at Operation Mapping saying "Runtime exception occurred during application mapping com/sap/xi/tf/_MM_SRM_Hubwoo_Invoice_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /Invoice. Valuesmissing in queue context. Target XSD requires a v~"
Even though the mapping is getting executed successfully in ESR, I am not able to fix this issue. Need your inputs in resolving the same.
Regards,
Saurabh
Edited by: saurabh mathure on Oct 16, 2010 8:14 AM

Hi ,
issue"Can not create the target element value missing the queue context'.
reason for this issue:
Target field expecting some value from sender field. so in testing your not getting any data from source field for this reason your getting that issue.
Solution:
In mapping use node function:Mapwith deafault between source and taget fileds.
Then activate mapping . now excute the scenario it will properly without that issue.
Cheers,
Meera

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Some values missing in FAX whereas same drivr program and smartfrm in print

Hi Experts,
I have a driver form and smartform in Print and same in fax configured in nace. But there are some values missing in FAX output whereas in print and email it is correct.
Can anyone help with the reason.
Thanks

closed..

A/c doc not created and error msg "Business Area Miss-Match Check input"

Hi,
After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
Regards,
Sohail

Dear Sohail Rahman,
Looks like the Business area has not been properly assigned.
Business area can be created for three combinations:
1. Business area by sales area
2. Business area by plant and division
3. Business area by plant and item division
In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
Hope this helps
Thanks
Murtuza

Planned Values Missing from report S_PL0_86000029

Planned Values Missing from report S_PL0_86000029, how to rectify this?
Where to plug in the values?

it's Plan actual comparison in the Profit and Loss Financial Statement.
This Transaction Code is for Profit Loss Statement whereby the Planned values have to be seen.
But one thing, I have also deleted the planned values from the General Ledger and Profitability Analysis.
Need to get these Planned values. But from Where?
Deleting GL Planned values - GLDE
Deleting COPA values - KEDB
This is what I have used.
Edited by: Bhatia on Oct 9, 2008 8:16 PM

Server 2012R2- RDS Farm Certificate Miss-Match on Session Hosts

Hi Guys,
I've another RDS2012R2 issue. Internal and external domains do not match. External: domain.com.au; Internal: domain.com.net.
I'm getting certificate miss-match errors when connecting to the Farm/RemoteApps.
I have performed the follow fixes:
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment (http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80). This resolved the original issue where I was getting a certificate miss-match error externally
for the FQDN of the server.
Updated the RDP-Tcp certificate used on the Session Host Servers. This was to resolve an issue where using mstsc to RDP to the farm externally(via gateway) would give a Certificate is not trusted error on the RDSH side.
Now whenever RDWeb is used to launch a RemoteApp or the farm, I get a certificate miss match error as the RDSH server is called RDS1-TCC.domain.com.net and the certificate is for remote.domain.com.au.
I rolled back the last change so that RemoteApps and the Farm would work successfully internally without certificate issues. How do I go about resolving the certificate errors?
For extra background details see my orignal thread, It was marked as answered when only 1 out of 2 issues was resolved. http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS
Cheers,
Ben

Hi Ben,
Thank you for posting in Windows Server Forum.
In your case, I can suggest you to check that the certificate must match the FQDN of the server. If you are creating SSL certificate then it must be signed by trusted authority and also the certificate must be stored under “local computer/personal store“.
Also you can buy the certificate from 3rd party which is wild card certificate and only 1 certificate can be used for your network. Please check below links for more information regarding certificate issue.
1. Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
2. Configuring RDS 2012 Certificates and SSO
3. Windows 2012 RDS Certificate mismatch
Hope it helps!
Thanks,
Dharmesh

Data miss match

HI sdn Gurus,can anybody share with me some real time issues related to data miss match in support project.i am in need of it.i just want to know that what are the issue did comes related to data miss match in production & support environment.

Hi
Data mismatch means,The data in BW and data in R/3 are different...
This is due to Some load failures,selection criteria is different from R/3 to BW..
Need to look each and every step of data extraction..need to look at RSA3..How data is extracting..How data is appear at PSA..How data is populated from transfer rules and update rules..How data is loaded into Infoproviders..Some times data is correct in data providers and not correct in report result,because of selection conditions are different..You need to look at all these...
Hope it helps
Thanks
Teja

MM vs FI report - Stock Values not matching

Dear Experts,
MM Report : We are taking stock value report from MC.9 or MB5L for few sites for the previous financial year.
FI Report : The same sites and same previous year with material G/L account, the t-codes FAGLB03 or S_PL0_86000030 are showing the different values.
The question here is,MM and FI reports are not matching. (FI reports shows Rs.47750 higher than the MM reports). As per the client requirement, the MM & FI reports should match the values. Because all the material movement types are related to FI (For. ex GR & IR )
Kindly tell me, what are the possibilities to go wrong?
How & where to analysis?
Expecting a perfect report which gives the MM & FI values?
Additional details: There is no possibility of manual posting in G/L account. It is automatic posting (Checked in the Tcode - FS00)
I really appreciate if any one help me
Thanks & Regards,
n a v a h s e k
Edited by: navahsek on Aug 27, 2009 12:17 PM

Tthe stock values are matching in the company code level for previous financial year but when checking for few sties, the stock values are not matching.
For Ex. year 2008 MM Stock values Rs. 10 Lakhs & FI values also same Rs.10 Lakhs for the company code level.
If you check the same for few sites( Site1, site2, site3, site4) & same year, the MM & FI values are different.
I really appreciate if you help in this.
Thanks & Regards,
n a v a h s e k

Cannot create target element/ns1:MT_CONTRACT.Value missing in queue context

Hi Friends,
AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
that is csv file am trying to convert to xml. but am getting error "Cannot create target element /ns1:MT_CONTRACT. Value missing in queue context."
my data types is:    MT_CONTRACT_SNDR                                                            MT_CONTRACT
SUB_ELEMENT:              Recordset                                                                            Recordset
SUB_ELEMENT:                   Item                                                                                Item
SUB_ELEMENTS:                    AgrmntID                                                                              AgrmntID
                                                 Company_Code                                                                    Company_Code
                                                 Vendor_No                                                                            Vendor_No
like this all the 18 elements under Item node. I kept Recordset occurance 0-1 and Item 0-Unbound and all 18subelements as 0-1 in both sender and receiver. And in content conversion:
Document Name: MT_CONTRACT_SNDR
Document Offset: 1
Recordset Structure: Item,*
Record Sequence: Asending
Recordsets per Massage: 1
Key Field Type: String (Case-Sensitive)
Item.fieldSeperator : ,
Item.endSeperator: 'nl'
Item.fieldNames: AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
KINDLY SUGGEST ME WHAT MISTAKE AM DOING. AM NEW TO SAP PI

I have this error in audit log. On searching I read that the error is connectivity problem between abap stack and java stack. but I made restart the server but error not cleared. can anyone of you suggest me to solve?
Audit Log for Message: 7c06ee0d-d70b-406f-07bc-f56228cc1d6a
Time Stamp Type Description
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:05:07 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:05:07 Information The message status was set to WAIT.
10.08.2011 18:05:07 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:10:07 IST 2011.
10.08.2011 18:10:07 Information The message status was set to TBDL.
10.08.2011 18:10:07 Information Retrying to deliver message to the application. Retry: 1
10.08.2011 18:10:07 Information The message was successfully retrieved from the receive queue.
10.08.2011 18:10:07 Information The message status was set to DLNG.
Time Stamp Type Description
10.08.2011 18:10:07 Information Delivering to channel: CC_Contrct_Recivr
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:08 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:10:08 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:10:08 Information The message status was set to WAIT.
10.08.2011 18:10:08 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:15:08 IST 2011.

Value miss match

Similar Messages

Maybe you are looking for