Value of Like New TV

I have a like new Sony KDL-V32XBR1 32" BRAVIA XBR LCD Flat Panel HDTV. What would be a reasonable selling price for me to ask for it?

Don't expect anywhere near close to retail. TVs are in a slump right now.
Disclosure: Former BBY employee.

Similar Messages

  • How to populate values for a new field in target infoprovider

    Hi Experts,
    am new to BI. i would like to know on how to populate values for a new field in the target cube with start rotuine.In my case,  i have a source infoprovider, which has 3 fields and a target infoprovider, which has 5 fields. i need to populate the new 2 fields in start routine. i dont want to populate using Field routine and am using 3.5 version. please assist with code on how to solve this issue.
    Thank you,
    Chitra.
    Edited by: Chitra_BI on Jun 13, 2011 10:23 AM

    Debug the standard code and see where the other fields are getting update. you can use the similar approach and area to code for the new field.
    Regards,
    Lalit Mohan Gupta.

  • Which OS, Version, Best Setup on like-new 2008 MBP for non-HD archival DV?

    MacBook Pro 15"
    (Early 2008)
    2.4 GHz Core 2 Duo
    4GB RAM
    720GB 7200rpm Hard Drive (original 360GB 5400rpm drive also available)
    OS 10.6.8
    (6GB RAM possible but additional $100+ for 4GB module needed now for software upgrades)
        I first and last used Final Cut Pro 2-3 in film school on a Titanium PowerBook (500MHz!) during the OS9/X transition.  Next, was an Aluminum PowerBook (1.67Ghz) but because of life changes, I did little editing other than occasionally in iMovie.  Then as an early adopter of iPhone/Pad, I rarely used my AlPB other than for back up, writing, and occasional simple editing.
        Now I'm finally entering the early MacIntel age with a pristine "early 2008" MacBook Pro bought for $250 from an elderly original-owner couple who used it only at home for email and iPhoto.  Though at the end of its supported life, it's practically new with a known history of light graphics usage (no video or gaming rendering ever) delivered in the original box with original battery (only 46 cycles!), discs, manual, like-new charger, and no sign of wear.  The original internal wrapper was even saved and put back on the device!  Furthermore, because the wife was a photo enthusiast, the Apple Store swapped out her internal hard drive for a Western Digital 720GB 7200rpm drive and the husband just gave me the original 360GB drive!
        I want to do several things with this "new" device.  I've done a lot of research but the world has changed since FCP 3 and the G4 processor and I'm overwhelmed with all the possibilities.  I need guidance and have always appreciated the wisdom and generosity of the gurus here. I thank you all in advance!
    iCloud integration: I'd like it since I'm an iPhone/Pad user.  I could upgrade to Mountain Lion but Mavericks, under the best of conditions, is doable on my device and may give me improved CPU and battery performance.  I realize this is best left for the OSX forums.  HOWEVER...
    Final Cut Pro: I want to also return to editing in FCP an unfinished documentary using primarily archival film and video converted to non-HD DV.  This may greatly impact how I set up my drives and the decision as to which OS is best.  So, this should probably be my initial decision.
    Hard Drive:  First and foremost, I should probably swap the drives and place the 7200rpm drive into an enclosure (Firewire or is that stone-age?) for FCP media, correct?
    OS:  With Mavericks, I must use FCPX which is beyond my current non-HD needs and will most likely strain my system resources.  However, the new simplified interface is appealing and I've read some users are running it on "early 2008" MBPs.  If an earlier OS is better suited, then which one?  And also...
    FCP Version:  Which is most stable given my model?  And which is best for non-HD needs?  What about FCExpress?  I want to explore more possibilities than what's available in iMovie and would appreciate the simpler interface found in FCE and FCPX, especially since I haven't used any Final Cut since FCP 3 but will gladly embrace what's best.  I want to relearn the program and hope to continue using it for other projects.
    Partitioned drive:  Finally, what about partitioning my drive, one for daily life running Mavericks or other OS, the other solely dedicated to an optimized OS/FCP for non-HD editing?  Even at 360 GB it should be doable if I keep it lean and the bulk of storage externally (I ran FCP 3 adequately on a partitioned 40GB drive back in the day).  How much space should I dedicate to an FCP partition?
        Finances are tight and I'll need to upgrade Office, other apps (I know there's Rosetta in Snow Leopard but must weigh that with iCloud integration; decsions, decisions!) and probably locate an older copy of FCP on EBay or elsewhere which could be expensive.  I must wait a bit before swapping in a 4GB RAM module and possibly upgrading to an SSD.  Meanwhile, I'd like to experience this like-new MacBook Pro now, both as it was during its heyday and with what's still possible today.  It seems doable and I appreciate any and all suggestions.
    Thank you all and have a great day!
    Evalyn
    PS: I realize my FCP3 files are probably useless and plan to reimport everything into a new project.  And sorry for the lack of paragraph spacing.  Can't get it formatted right on the iPad!

    CyberFinch wrote:
    FCP Version:  Which is most stable given my model?  And which is best for non-HD needs?  What about FCExpress?  I want to explore more possibilities than what's available in iMovie and would appreciate the simpler interface found in FCE and FCPX, especially since I haven't used any Final Cut since FCP 3 but will gladly embrace what's best.  I want to relearn the program and hope to continue using it for other projects.
    Just to note that there is much more commonality between FCP3 and FCP7 and/or FCE than with the early version and FCP X. IMO, learning FCP X is worth the effort, but it will require some effort since it is so different than traditional NLE's. You could "get by" with FCE for many types of projects and you should be able to find a copy on eBay or Amazon  for a few hundred dollars. However, you will not be able to open a FCP project of any version with it.  Also, I don;t think I would agree that  its UI is simple; it's essentially the same as FCP.
    As for partitioning, some people advise against editing from drives that have been partitioned. I use a partition on one machine and I've not had any problems, so I think it is an option.
    As you can see from the replies you've received so far, you have  reasonable choices. Good luck.
    Russ

  • Every once in a while when I open my mail or a page I get nothing but strange lines of symbols.  Many of the symbols are black triangles with question marks in the center.  I completely reset it like new, but problem still exists

    Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center.  I have reset the ipad2 to new condition but the problem still exists.

    A reset does not make tthe iPad "like new."
    First, let's ensure that we agree on just what is a Reset...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • So what exactly does it take to qualify a phone as "Certified Like-New"?

    ...verify the phone turns on and then ship it out?
    I've had a Droid since launch...its been in a case and screen protector since day one and I take pride in keeping it (and all my other electronics) in mint condition. When I installed 2.2 last month, something went wrong and it corrupted my phone. It freezes 2-3 times daily, requiring a battery pull. I've done factory resets, OS reinstalls...nothing fixed it, and Verizon told me I'd need to get it replaced. 
    I already had a poor experience with refurbished verizon replacements with my last phone, taking 3 tries to finally get one that wasn't physically beat up....and that one died literally 2 days before the warranty expired (thank god). I figured maybe the Droid being an expensive smartphone would have some better quality control, but unfortunately I know now thats not the case. First replacement came with a slider that would fall open when turned sideways. Second phone's proximity sensor didn't work. Third phone that I just received is similar to the first, with a loose headphone jack and peeling keys.
    I've had many conversations with reps regarding my options (or lack there of) and their replacement policies. At one point a rep stated Verizon has one of the best replacement policies because they don't ever charge you for a warranty replacement, whereas many other carries do. I agreed that was nice, but also commented that it seemed pretty clear the money they're spending to ship/replace for free was just made up in reduced labor costs. Rather than have an employee evaluate and QA the phones, they make it the responsibility of the customer to have to complain about this issues that would have otherwise been found. There's no upfront customer cost, but instead a lot of time and frustration. He had no comment on that.
    What I want to know is how a phone gets recertified and earns a like new status. Reading these forums, its clear I'm not the first to have this problem. People might say I shouldn't be so critical of the replacements, but its frustrating to keep your phone in great condition, only to have a Verizon update ruin all of that in an instant, followed by repeated replacements that are sub par. I'm not looking for a free upgrade, I just want a phone that is equal to the one I had...and it seems like Verizon's strategy is to just keep sending me phones until one is good enough, or I get sick of trying. My fear, however, is that even if the replacement looks good up front, whats to say it won't die months later when I am out of warranty. Then I'm stuck tacking on another two years onto my contract to get a discounted phone, buying one at full price, or buying one second hand.  Either way, more money out of my pocket that I shouldn't have to spend.

    They basically make it look new (take out scratches, etc)
    It also has to turn on and radio functions are tested to turn on (not connect).
    This includes cell radio, wifi and GPS.
    That is the basis of what gets release. They do not check the sliders past the point of opening and closing. They do not have a basis for release in regards to the "stiffness" of the slider.
    In essence, the phone will look good, but may not be just like new.

  • Thunderbolt to Charge Certified Like NEW? NO I don't think so...

    I dont know what appears to be the problem with the thunderbolt and like new devices. I hate to complain but there is an issue all around with them. I've had 4 CLN thunderbolts and all have had various problems most that have been posted in the forums. My biggest issue is that i asked for a NEW replacement after having so many i get told NO. I'm not a genius but when they certify them and send them out and they still have issues doesn't that seem to be a problem on their end since they hit the Verizon bench to be recertified not RTV to HTC. Which neither seems to take responsibility for any of the issues related to the phones. Honestly my TB was working fine before i was one of the few that got the GB update and pretty much created all kinds of problems beyond that of the "KNOWN" VM issue. I was about to cancel in a dumb move i opted for the Droid Charge, Nifty little phone but 2 major problems that verizon fails to acknowlege. Slow internet especially with flash and the fact that you can not use the web while on a call and no i am not talking sitting at home with wifi. TB is the only 4g device presently that you can surf the web and talk at the same time not attached to WIFI, just one of those minor things that one verizon hides behind that we dont advertise that and almost like its a function they do not support, "IT JUST HAPPENS". My issue now is if you are going to do like for like make sure the "LIKE" matches what the other does besides the camera resolution. I simply asked for a straight out of the box thunderbolt and get the run around. I bought a new phone and never got to enjoy my NEW phone, but was able to finally enjoy it til GB fiasco came out. Any advice would be appreciated and NO MORE EXCUSES...

    I really do not see why users are having so many issues with their devices, I have been doing nothing but enjoying my device except the recent data drop issues but this seems to be because of the 4g conversion here in KC..   I haven't had any replacement devices for my Thunderbolt but I have for other devices and I never had any issues with any of the replacements..
    I feel bad to hear the luck that some of you have been having... This is why I try to help as much as I can..
    Now as for the new device being given the contract lay out this pretty clear and it stated that a certified replacement will be given after 14 days return time and unless someone shows mercy on you I don't see this changing because they seem to sticking to the contracts rules which is legally in their right...
    Good Luck on finding a solution, I wouldn't change my device for anything released through Verizon at this time...  Now the HTC Vigor (Or what ever they release it at has caught my interest) 

  • How can I delete EVERY THING off my Mac and have it like new?

    There are sites that I've viewed and programs I have downloaded that I NEED to delete completely from my computer!! Ie: Friends telling me that a program is free and has no viruses, but it does! Sites forwarded that are supposed sfw, but are not!!
    I would like to DELETE EVERY THING off the computer and have it be like new.
    I remember on my Dell PC if I hit f8 or f11 (can't remember which one) a screen would appear and if I chose option "Dell Factory Image Restore" it would DELETE EVERY THING off of the computer and have it like new - as if you just got it from Dell.
    Is there anything like that for Macs?
    Whether it be some where on the computer already?
    Or if it's with the CDs that came with the Mac?
    Message was edited by: georgebrobinson
    Message was edited by: georgebrobinson

    How can I delete EVERY THING off my Mac and have it like new?
    Boot from the software install DVD and do an "erase and install" when prompted.

  • How to make iPad 2 look like new?

    Hello I want to reset all settings, apple id and other things. I want him to look like new.
    Delete all information. How I can do it ?

    make sure you have everything backed up because it will go back to factory setting so everything will be deleted in the iPad

  • I need help restoreing my ipod nano 3rd gen so its like new

    I need help restoreing my ipod nano 3rd gen so its like new

    Plug it to your computer using iPod USB Cable (any cable should work excluding iPhone 5 and Shuffle cables)...... when you see your iPod in iTunes go to that iPod and click restore...... the whole process should take (depending on what you have on your iPod and its is up to date) it should take no longer than 30 minutes...... then it will ask if you want to set up as new iPod or restore from back-up (itunes back up), since you said:
    so its like new
    click set as new iPod and follow through what they said.

  • Apple might exchange my iPhone 4 with a "like new" phone.

    What the heck is a “like new” phone?
    My iPhone 4 is defective, and it’s just 32 days old.
    I was told that, if a replacement is indicated, that it’ll be replaced with a “like new” phone.
    What exactly is a “like new” phone? How exactly does it differ from a brand-new iPhone that I purchased 32 days ago?

    Hi all,
    I've had three phones now all of which are stated as brand new but there is speculation that
    refurb units have a different serial number starting with 5k or 9k - a friend of mine has >this on his replacement after he smashed his screen.
    I'm interested that the refurb units have serial # starting 5K or 9K.
    Mine is exchanged iPhone 3GS, and its serial # (you can see it in Settings>General>Information>Serial Number) is starting with 5K!!!
    Now, I have three questions...:
    * do you know how the BRAND NEW iPhone 4's serial # starts?
    (I heard Brand New 3GS's serial starts with 88 but I'm not sure...)
    * when you exchange your fault iPhone in the Apple Store, can you ask "Hey, I want a brand new one not the rehurb one. Can I check the serial #?"
    * the serial number appears in the software screen (Setting menu), and it appears in the black box that contains brand new iPhone that you buy. But how about the brown box that contains the iPhone you get the exchanged one? Can you see / check the serial # too?
    I want someone to let me know so kindly.
    Thank you!

  • Would like new window to open in new tab as to opening in an exsisting tab and replacing open window

    Would like new window to open in new tab as to opening in an exsisting tab and replacing open window

    Could you describe the problem or problems in more detail? For example:
    * Are you clicking a link in page open in Firefox, or following a link from a different application?
    * Do you want different things to happen between those two cases?
    Background: Pages have a range of ways to set up a link. These can include:
    (A) Same window or tab (default)
    ''To change how this is handled, you can manually Ctrl+click the link to open it in a new tab, or use an add-on like Tab Mix Plus to override the default.''
    (B) New blank window (target="_blank")
    ''On the Tabs panel of the Options dialog, the first checkbox determines whether you see a new window or a new tab in the current window.''
    (C) Named target (e.g., target="MyApp")
    ''On the Tabs panel of the Options dialog, the first checkbox determines whether you see a new window or a new tab in the current window.''
    HOWEVER, if the site already used this named target before and the window/tab is still open, Firefox will re-use that window/tab and replace the current page with the new page.
    ''To change how this is handled, you can manually Ctrl+click the link to open it in a new tab, or perhaps an an add-on can override the default.''
    (D) Scripted (pop-up) window
    ''This can be the same as any of the above, or the page can bypass the new window/new tab setting by specifying certain features of the new pop-up window. There is a hidden override if you are running into this problem (browser.link.open_newwindow.restriction).''

  • Help please, class starts yesterday, and I need to know if Lr 5.6 64 bit can be reset to "like new" or default. Like it's never been used!

      Hello, I need to know if it is possible to reset Lr 5.6 64 bit to default or like it was when I first downloaded it. Clean/empty/fresh. As an online college student, and using Lr for a while now, without being "Detailed Oriented," and "Methodic", I have a very messy and unorganized workflow. I am about to begin Digital Image Management, so a "like new" Lr, would help me tremendously! Thanks in advance for any help offered!

    File->New Catalog

  • The Keychains keep popping up so i am going to reset my macbook pro, how do i go about resetting it so its like new? thanks scott,

    wanting to reset my macbook so its like new

    It's best to describe the problem, rather than your conclusion as to how it should be solved.

  • So if my restore from time machine is my comp like new again?

    so my computer is running very slow, if i erase and re-install the os from the cd and restore from time machine wont my computer run like new again? do i even need to re-install the os from the cd?

    If you restore your entire system, it will be as slow as it was the day of the backup.
    You should try to find out what's slowing your computer instead of re-installing. You will just probably re-install the source of your problem as well and wasting your time.

  • How can we include the property value into the News RSS?

    We have defined object property u201CDepartmentu201D that is used in News XML creating form. How can we include the property value into the News RSS (set value of the particular RSS XML tag)?

    We have solved the issue with NWDS

Maybe you are looking for

  • How do I recombine tracks from one album that have been split up in the iCloud

    I have a number of soundtrack albums where each track is atributed to a different artist.  When they go into iCloud they sort as multiple "albums", one for each artist.  They show the same album name but each track is mixed amoung my other albums alp

  • Z-Index inside flex 4???

    Hi iIve been hearing that adobe was planning to add Z index in Flex 4 to arrange the order in which objects are displayed. Is this true? We are developing a massive game like application with thousands of objects, many of which are moving (e.x. units

  • ML sound output device not remembered

    My USB D/A converter worked fine from Tiger right up till Lion, now with Mountian Lion everytime I restart the machine I have to reset the Preferences for the USB output. Very tedious. How can Apple fail in such a basic software setting??? Anyone fou

  • Insufficient data for an image

    I get this after scanning documents into my Nuance Paper Port 12.  I can see the document, but when I want to increase the size of the doc to fullscreen, I get the above message.  I can print the doc. This problem just started.  I am using Adobe Read

  • Problem with image resolution with larger screen size

    I was working on Basic Lens Sample (Basic Lens Sample) for windows phone 8 App. In this the camera by default sets to default highest resolution. Just had couple of questions on this: 1.) How to change basic settings like resolution,ISO etc.,in this