Value of New iBook G4 Value with extra programs???

I wanted to know if anyone could tell me how much I could get for my iBook G4 its about 4 months old, the extra programs it has are:
-Microsoft Office 2004
-Adobe Creative Suite 2-Illustrator CS2, In Design CS2, Go Live CS2, Photoshop CS2, Version Cue CS2, and Adobe Bridge.
-plus the regular programs that came with the computer.
I wanted to sell it and put the money toward a new PowerBook G4 Titanium for my school stuff, I paid a lot of money for the Adobe program and I wanted to know the value of the computer with the programs installed on the computer. Would I be able to still install Adobe to my new computer without any problems? If anyone knows please let me know. Thanks.
~KrYsTaL~

For the iBook, check on eBay and see what others are going for. You can also check Apple's web page for refurbished equipment and see what they are going for there. Between the two you should be able to figure out what the market for it is.
As for the software. No you can't sell the software installed on the computer and then install it on your new one. You have two choices, delete the software from the computer and keep it for your new PowerBook or provide the buyer with the media, licenses, and documentation when you sell it. You really have to dig through each license agreement to find out what you can and can't do with it. If you got any of the software through educational discounts, there may be additional limitations as to what you can do with it.

Similar Messages

  • Passing values with each program run

    Hi ,
    I have a program which runs 6 days a week and updates a table.Now my requirement is to assign a value to a field for each day when the program runs every day in the week.
    <b>For first day - D
    second day - D-1
    sixth day - D-5.</b>
    when the program runs after D-5 it should again start from D.
    How can i achieve this please advise.
    Regards
    Pavan

    Hi kumar,
    1.
    03-Jun-06     D
    04-Jun-06     D-1
    05-Jun-06     D-2
    06-Jun-06     D-3
    07-Jun-06     D-4
    08-Jun-06     D-5
    09-Jun-06     
    10-Jun-06     D
    11-Jun-06     D-1
    12-Jun-06     D-2
    13-Jun-06     D-3
    2. this program will give output,
       based upon date input.
    3.  just copy paste
    report abc.
    data : monday type sy-datum.
    data : abc(3) type c.
    data : diff type i.
    DATA : DAYNR TYPE C.
    parameters : mydate type sy-datum default sy-datum.
    START-OF-SELECTION.
    CALL FUNCTION 'GET_WEEK_INFO_BASED_ON_DATE'
    EXPORTING
       DATE          = mydate
    IMPORTING
      WEEK          =
       MONDAY        = monday
      SUNDAY        =
    DIFF  = MYDATE - MONDAY.
    DAYNR = DIFF.
    ABC = 'D'.
    IF DIFF >= 1.
    CONCATENATE ABC '-' DAYNR INTO ABC.
    ENDIF.
    WRITE ABC.
    regards,
    amit m.

  • Set JArray values with invalid key value: "LastUpdatedTime" on new alert rule creation

    Hey all!
    I'm trying to create a new alert rule using version 0.9.11 of the Monitoring Library and am getting this error on alertsClient.rules.CreateOrUpdate:
    "Set JArray values with invalid key value: "LastUpdatedTime". Array position index expected."
    That's interesting because LastUpdatedTime is a DateTime object, and whether I set it or I don't, if I set a breakpoint, it does set itself correctly, but the API appears to be expecting a JSON hash?
    I've tested alertsClient and I'm able to get existing alerts (also metrics with metrics client), so I don't believe it's an access issue.
    Any ideas?
    The full code I'm using for the test (borrowed virtually verbatim from the Cloud Cover video
    here): 
    Rule newRule = new Rule
        Name = "CPU Over 90%",
        Id = Guid.NewGuid().ToString(),
        Description = "CPU Has been over 90% for 5 minutes",
        IsEnabled = true,
        LastUpdatedTime = DateTime.Now,
        Condition = new ThresholdRuleCondition
            Operator = Microsoft.WindowsAzure.Management.Monitoring.Alerts.Models.ConditionOperator.GreaterThan,
            Threshold = 90,
            WindowSize = TimeSpan.FromMinutes(5),
            DataSource = new RuleMetricDataSource
                MetricName = "Percentage CPU",
                ResourceId = "",
                MetricNamespace = ResourceIdBuilder.BuildCloudServiceResourceId(<cloudservicename>, <deploymentname>)
    RuleAction action = new RuleEmailAction
        SendToServiceOwners = true,
    newRule.Actions.Add(action);
    OperationResponse alertResponse = alertsClient.Rules.CreateOrUpdate(new
    RuleCreateOrUpdateParameters { Rule = newRule });
    Console.WriteLine("Create alert rule response: " + alertResponse.StatusCode);

    Hi Greg,
    Thanks for your post!
    Error "JArray" has been fixed in the latest nugget package.
    Refer to:
    http://www.nuget.org/packages/Microsoft.WindowsAzure.Management.Monitoring/
    Hope this helps!
    Regards,
    Sadiqh

  • Overwrite existing Domain values with new one

    Hi All,
    I have an existing database (It is not an SAP table, it was made for client, but I am not supposed to modify it). But, my issue is that, I have to change the values of domain used in it to new values.
    For e.g.
    Current Values are 1 - ADD, 2 - NOT POSSIBLE and  so on
    New values to be added: 1 - ADDITION 2- ADDITION NOT POSSIBLE.
    I tried using 'Fixed Value Append', but I want to overwrite the values with new ones.
    Please suggest me if there is any method to do it.
    Thanks.

    Hi,
    I don't understand if it a Z-table what is the problem in changing domain and why you are not supposed to change it since the task is assigned to you.
    Anyways, even if you write a code to change domain values, you would have to then get it moved to production for changes to reflect. Also, I don't think you would have the authorization to change table entries directly. Also this will result in inconsistency in various clients for domain values..
    The better solution would be, get authorization to change domain values, create transport request for this and get it moved to subsequent systems.
    Thanks.
    Ravi

  • New Blog Post: Saving Current Values with Cascading LOVs

    All,
    Just blogged on Saving Current Values with Cascading LOVs: http://bit.ly/hQPUPi
    Enjoy!
    Regards,
    Dan

    Monty,
    Glad to hear it's working for you.
    Oh, you just had to go there ;) Popup LOVs are a bit more difficult because the values are not automatically brought back to the page for you. I've already worked out how this could be implemented in my head - but writing it up, of course, is more of an effort. I've added it to my list of blog articles to write on. Since it's not a requirement right now, I'll cover another topic first and come back to that one afterward.
    Regards,
    Dan
    Blog: http://DanielMcGhan.us/
    Work: http://SkillBuilders.com/apex/

  • How can I return multiple values with PL/SQL Web Services

    Hi,
    I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
    I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
    Reginald
    ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

    Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
    It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
    {color:#ff0000}
    create or replace TYPE person AS OBJECT
    ( id_interv number,
    first_name VARCHAR2(50),
    last_name VARCHAR2(50),
    date_birth date
    );{color}
    Then your function used in your Web Service should look something like this :
    {color:#ff0000}
    function info_emp (p_empno IN VARCHAR2) RETURN person AS
    l_emp person := person(-1,'','','');
    BEGIN
    SELECT first_name
    ,last_name
    ,emp_no
    INTO l_emp.first_name
    ,l_emp.last_name
    ,l_emp.emp_no
    FROM emp
    WHERE upper(emp_no) = upper (emp_no);
    {color}
    {color:#ff0000}
    RETURN l_emp;
    EXCEPTION WHEN NO_DATA_FOUND THEN
    l_emp := person (-1,'n/a','n/a','n/a');
    RETURN l_emp ;
    END info_emp;{color}
    {color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
    &lt;first_name xsi:type="xsd:string"&gt;John&lt;/first_name&gt;
    &lt;last_name xsi:type="xsd:string"&gt;Doe&lt;/last_name&gt;
    &lt;emp_no xsi:type="xsd:string"&gt;0250193&lt;/emp_no&gt;

  • Search Results web part - Custom Query using "Value with a parameter from URL" inconsistent

    I have encountered what I think may be a bug, but I am hoping that there is something that I am missing.
    Within my search site, I have created a new search results page where I want to customize the "Search Results" web part query.  I can add in any number of property and keyword filters (using the "Build Your Query" dialog) without
    issue... until I add a filter that uses the QueryString property (the builder dialog calls this "Value with a parameter from URL").
    If I use {QueryString.MyParameterX} for filtering, it works beautifully in the query builder dialog.  I see the expected results in the search results preview pane, but as soon as I apply the changes things become inconsistent. 
    If I close/reopen my browser and navigate to my page at http://myaddress/search/Pages/testresults.aspx?MyParameterX=test I see results.  If I then refresh the page, I get a "Nothing here matches your search" message.  I can then go to
    the same address but change one character to an uppercase character and get results.  Refreshing that same page again returns "Nothing here matches your search".  I can only get search results one time per uniquely cased URL without having
    to close/reopen my browser.  This behavior was seen on both Firefox and IE.
    Finally, I found that if I instead navigate to http://myaddress/search/testresults?MyParameterX=test, it always returns results.  This, unfortunately isn't the best solution for me... but it is a solution.
    Any insight that anyone can provide is greatly appreciated!  I would really like to be able to depend on this working in all logical cases (especially since the search center of other sites is set using the path all the way down to /Pages).
    Thanks!

    Hi, have you been able to solve this issue? I'm getting the same issue and I cant solve it (required CU is installed).
    Fabio

  • Update a filed value with powershell script with ordery by and where condition

    Hi
    I have below powershell script to update list columns but  how i update a field value with ordery by a column and where condition
    below is the part of my script
    $list = $web.Lists[$listName]
    $items = $list.items
    $internal_counter = 1
    #Go through all items
    foreach($item in $items)
    if($item["CourtNO"] -eq $null)
    #if($item["CourtNo"] -eq '1')
    $item["CaseNo"] = $internal_counter
    #how to add a column ordery by Title
    # and where Title field value from 1 to 10
    $internal_counter++
    adil

    Hi,
    You mean that you only need to update all items with Title field value in range 1..10 and order by them before run the loop statement update?
    If so, use CAML query to get the items only match the condition.
    #Build Query
    $spQuery = New-Object Microsoft.SharePoint.SPQuery
    $query = '<Where><And><Gte><FieldRef Name="Title" /><Value Type="Text">0</Value></Gte><Lte><FieldRef Name="Title" /><Value Type="Text">10</Value></Lte></And></Where><OrderBy><FieldRef
    Name="Title"/></OrderBy>'
    $spQuery.Query = $query
    $spQuery.RowLimit = $list.ItemCount
    $items = $list.GetItems($spQuery)
    Hope this help!
    /Hai
    Visit my blog: My Blog | Visit my forum:
    SharePoint Community for Vietnamese |
    Bamboo Solution Corporation

  • Column values with invalid characters

    How to find the column values with invalid chararcters
    meaning value upper(col) not in ('ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890')
    For ex.
    1. CDAssyKit,DragonNaturallySpeaking�Preferred7.0,USEnglish
    2. CDAssyKit,DragonNaturallySpeaking Preferred7.0,USEnglish
    Query should retrieve only the first row, since it has extra � character in the column value.
    Thanks for your help.

    Convert all letters and numbers to an arbitrary letter and then remove that letter. If there are any characters left, they are invalid according to your rules.
    select *
      from t
    where replace(translate(lower(column_name), 'abcdefghijklmnopqrstuvwxyz0123456789', 'a'), 'a') is not null;

  • Urgent: Formular question: get first/last month value with qty value

    We've got a query result as the following:
    Jan_2007 -- Feb_2007 -- Mar_2007 -- Apr_2007
    0 --- 54 --- 0 --- 3
    23 ---0 --- 12 --- 7
    In the above query result,
    1st row shows the sales quantity in Jan_2007 is 0, in Feb_2007 is 54, in Mar_2007 is 0, and in Apr_2007 is 3.
    2nd row shows the sales quantity in Jan_2007 is 23, in Feb_2007 is 0, in Mar_2007 is 12, and in Apr_2007 is 7.
    We would like to add a new column to get the first/last month value with quantity, e.g., in 1st row, the 1st month value with quantity value (>0) is Feb_2007, and the last month value with quantity value (>0) is Apr_2007. Therefore the 1st month value with qty is Feb_2007 and the last month value with qty is Apr_2007. In 2nd row, the first month value with qty is Jan_2007 and the last month value with qty is Apr_2007. But how to use formular to get the 1st/last month values with qty?
    We will give you reward points!

    Hello Kevin,  
    You can create forumula using [Boolean Operator|http://help.sap.com/saphelp_nw04/helpdata/en/23/17f13a2f160f28e10000000a114084/content.htm]
    IF<Logic Expression> THEN <Expression1> ELSE <Expression2> can also be made using a formula in the form
    You can also use the [AND, OR Logical operators |http://help.sap.com/saphelp_nw04/helpdata/en/23/17f13a2f160f28e10000000a114084/content.htm]to check all the keyfigure columns.
    Thanks
    Chandran

  • Set Default Values in Listbox with Dialog Programming

    Hi all,
    I am stuck with a problem i.e  I am working with Dialog Programming Screen
    where i have to set default values in some n numbers of Listbox which i have created on Screen.
    This default value is needed to be fetched from database table.
    I am using single table. Hence no confusion that i have to first fetch data from 1st listbox then corresponding data is fetched into second & so on ..NO NO This is not required.
    Simple one screen which will update a table in database, where  some fields on the screen needs to be default set as per tables domain default values set while table creation.
    Please help me out in this.
    Thanks & Regards,
    Sandhya.

    Please search SDN, before you post a new forum from next time... any ways just follow the below code..
    u need to use the FM 'VRM_SET_VALUES' to implement list box in module pool. Check the below code. u have to write this code in PBO..
    if c = 0.
    select land1 landx from t005t into table wi_country.
    sort wi_country by land1.
    delete adjacent duplicates from wi_country comparing all fields.
    loop at wi_country.
    wa_ctry-key = wi_country-land1.
    wa_ctry-text = wi_country-landx .
    append wa_ctry to wi_ctry.
    endloop.
    call function 'VRM_SET_VALUES'
    exporting
    id = 'ZCUST_MASTER1-COUNTRY'
    values = wi_ctry
    exceptions
    id_illegal_name = 1
    others = 2
    if sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    c = 1.
    endif.
    Hope this helps u,
    Regards,
    Rajesh

  • Change "choiseListe" values with javascript

    Dear,
    Is it possible to change "choiseListe"  values  with javascript.
    Exemple il have a choseListe :
         Country //// Values
          USA            us
          France         fr
          Spain           sp
    When il click in a botton i whant to change this choceListe :
         Country //// Values
          Morocco           ma
         Portugal           pt
    Thanks

    Hi,
    Listboxes and dropdowns can be scripted against without too much difficulty.
    You would need something like this in the click event of the button:
    listbox1.rawValue = null; //clear previous choice
    listbox1.clearItems(); //clear the list items
    listbox1.addItem("Moocco", "ma"); //add new list items
    listbox1.additem("Portugal", "pt");
    Hope that helps,
    Niall

  • Displaying Max/Min values with time for analog signals.

    I am sampling analog inputs. I simply want to display the max and min values with the time they occurred. This seems simple but I am new to LabView and can't find a Vi to do this.

    Here's the code. When you run the demo program, you'll see three traces: Green is the max so far, Red is the min so far, and White is the current signal value.
    As the input value cycles, you'll see the two limit values track its extremes. If you have any questions about how it works, just holler.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    min-max_plotter.vi ‏82 KB
    min-max_tester.vi ‏37 KB

  • Signature Schemas/Status values with Signature schemas need to be locked?

    I am tying to assign a signature schema to multiple values in a single status schema.  If I assign a signature schema to a status it automaticaly locks the document into that status so that no further changes to status can be made.  I need to have a signature schema  assigned to mutliple status values in the same status schema so I cant have A approved be locked because I still need the document to be B approved as well. 
    Does anyone know how I can adjust the setting so the status values with sig. schemas attached will not automatically be locked.
    Status Schema:
    Not Started
    A Approved  X signature schema
    B Approved  y signature schema

    Hello James,
    this is not possible. As I do not quite understand why you want to set up your status schema like that, it is difficult to propose another solution.
    If you want to stay with the schema you have mentioned, you will have to unlock a document which has been approved by A on the attribute dialog and set the new status "B Approved" there. But this means that the person who is doing that has to sign the document as first signee of the second signature process.
    Best regards
      Jürgen

  • Comparing the current value with the previous one in Powershell

    Hi,
    New to scripting and i was wondering how can I compare the current value with the previous value?
    I am having trouble with the loop structure, and I am not sure I am on the right track...
    I am trying to compare the record to next record in the same csv file after import-csv... My code runs fine, but is not giving the right result.
    $FilePath = Get-FileName -initialDirectory "C:\"
    #Testing for null
    If($FilePath)
    $Data = Import-csv -Path $FilePath | Sort-Object BUYER, {[int] $_.PO_NBR}, {[int] $_.LINE_NBR}
    Foreach($fData in $Data)
    $i = $fData
    Foreach($i in $fData)
    if($fData.Buyer -eq $i.Buyer)
    #save all the same buyer name to a new variable
    Write-Host "Same as previous"
    Else
    Write-Host "Variable is null"
    Remove-Item function:\Get-FileName

    Thank you. The Foreach loop is now working properly.
    Can I ask what is the purpose of "-ea 0" in the import-csv? I can't seem to find "-ea" as a parameter for import-csv in help.
    -ea is short for -ErrorAction.
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

Maybe you are looking for