'Value of valuated stock that has been issued' is different in MCBE and S031

Hello,
I noted that the field  'Value of valuated stock that has been issued' is different in the same period (07.2013) in table S031 and in the transaction MCBE.
Also, if the 'Quantity of valuated stock issues' for this period is 0, how can this field be calculated?
Thank's in advance.
Regards,
Carla Ribeiro

Hello Carla,
I am also analysing the same issue for S031 and MCBE. Found some points to share with you.
What I understood is this is due to Valueated stcock receipt value. This value is being added in issue value in MCBE report.
But not able to get why ? and S031 doesnt have value for valuated stock rec value. This value is being calculated during runtime and added to issue value in MCBE
Pls check and let me know if you have found the solution.
Thanks
Milind

Similar Messages

  • Can I watch a movie that has been purchased or rented from itunes and downloaded to my ipad without internet access?

    I would like to be able to watch a movie while I'm camping and stuck in the camper due to inclement weather.  More than likely, I will not have access to the internet.  Is it possible to watch a movie that has been rented or purchased and downloaded to my ipad?

    I have seen conflicting answers about this issue recently.
    If you purchase a movie and it is fully downloaded to your iPad - yes you can watch it without an Internet connection.
    With a rental there seems to be two schools of thought. The first is just like the answer to a purchased movie - once fully download no Internet connection is needed. The other reply is that you need an internet connection in order to authorize playback and those who state this say that you can't play a rental without the Internet connection.
    I have never rented a movie but the second school of thought makes no sense to me. If the movie is downloaded and the authorization has already taken place, I see no reason to need the Internet connection. I have read stories of iPad users talking about watching rented movies on airplane flights so that would be without an Internet connection.

  • I purchased a book through iTunes and it downloaded. I synced with my iPad. It shows the book is downloading but that has been going on for two hours and i still can't open the book.

    I purchased a book through iTunes. I then synced my iPad and went to iBooks. I clicked on the book and it shows downloading but that has been going on for almost two hours and i still can't open the book. What gives? I have done this before no problem.

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
    and then the 'Report a Problem' link on its line :
    and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
    Or you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • TS1538 Im having trouble connecting my ipod touch to itunes, i have the device plugged in but its not been recognized on itunes! i have plugged my iphone in and that has been recognized but not the ipod and i was wondering if anyone could help me sort thi

    i have recently purchased an ipod touch 5th generation ipod for my girlfriends daughters! im trying to sync some music onto the device but it is not been recognized on itunes. i have the device plugged in but i cant find the device on itunes! I have plugged my phone in to check if its the cable but the cable is fine as my iphone synced up perfectly! wondering if anyone could help me out??

    Hello there, dtumman.
    It seems that for the issue you are describing you were referred to us from the very article that provides the troubleshooting steps to help resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Keep in mind:
    Follow these steps, testing to see if the issue is resolved after each section.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Changing the value of a parameter that has been passed into an SSRS 2008 R2 report

    I support 200+ reports that all use stored procedures and have many drill downs with built in URLs.
    I want to do the below to avoid creating a brand new parameter that I will have to add to literally hundreds of places.
    We have what I'll call Param1 that receives a value from the user.  That Param1 is passed to the stored procedure(s) for the report and also embedded in any Action URLs for drill downs to other reports from that report.  All works great.
    Now I have a need to concatenate a string to whatever value they supplied which provides context for the environment in which they are running.  The reason I want to do this instead of creating a new parameter is because I need this in all my reports
    and as stated above I would have to make 100s of changes to make that happen.  If I can figure out a way to concatenate a value to the existing Param1 value I can greatly reduce the number of changes.
    I can't seem to be able to find a way to modify the value on an existing parameter that is passed into the report prior to report execution.
    I get an error when I simply try to concatenate something to the parameter in its Default property.
    I can't find a way to update a parameter value in the Report Code block.  There don't appear to be any methods available on the Parameter Collection to set the value of a parameter.
    Any ideas?
    Thanks!
    Nathan 

    Create a new parameter. Mark it internal, set it's value by expression to:
    =User!UserId+"MyNewValue"
    and pass it to the proc?
    Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.

  • How do I edit and save a word document that has been e-mailed to my ipad

    How do I edit and save a word document that has been e-mailed to my ipad and then re-send

    Use the paid version (install and activate) of Microsoft Word.
    https://itunes.apple.com/sg/app/microsoft-word-for-ipad/id586447913?mt=8

  • Capturing Footage that has been shot in Long Play?

    Good Morning All,
    I have been giving a tape that has been shot in Pal Long Play and I can not log and capture this DV Tape at all. Everytime I do try the footage is just useless.
    This may sound like a silly question but :
    Does anyone know the settings that I would put on FCP 6 to log and capture footage that has been shot in Pal Long play?
    Any help would by highly appreciated.
    Thanks for your time,
    Kevin

    LP mode slows the tape to extend the recording time. If the camera/playback device does not have this mode, the material will play back either as noise or accelerated. In either case the images will be unusable.
    You need a camera that understands PAL DV tapes recorded in LP mode. Your best bet may be the original cam.
    Once you have the original cam/ or one that records/plays LP DV tapes, dub the material to a standard play DV then capture the SP DV tape. LP tapes are notorious for audio and video drifting apart. The audio will almost certainly be recorded as 12 bit/32 khz.
    x
    x

  • Easily remove an SMTP address that has been applied by a Email Address Policy?

    Hello,
    How can I remove an SMTP address that has been applied to all users mailboxes and distribution lists?
    Thanks

    Hi,
    You can use "Email Address Policy" to manage all of the user's SMTP address.
    For Exchange 2003:
    How to Modify an SMTP E-Mail Address by Using Recipient Policies
    For Exchange 2007:
    Managing E-Mail Address Policies in Exchange Server 2007
    For Exchange 2010:
    Remove an E-Mail Address Policy
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • HT4623 Do I need to update my iphone4 because of the security issue that has been published lately?

    Do I need to update my iphone4 because of the security issue that has been published lately?

    Your profile shows you have a 4S with 7.0.6. That is the most current update. Do you also have a 4 that you haven't updated? If so, you should update it too.

  • Payroll Error msg "The gross wages do not cover the negative offset that has been forwarded, therefore, no grossup is permitted".

    Hi Experts,
    I am getting the below error msg while running payroll for an US employee.
    "The gross wages do not cover the negative offset that has been forwarded; therefore, no grossup is permitted."
    I am getting this error msg just after USTAX function processing part of UTX0 subschema. I am highlighting below facts & findings for your reference.
    As per a client requirement,  I have configured a new gross up WT (ER benefit contribution) for a benefit plan (IT 0168) and the changes are in QAS system. The changes have to be reflected in period 20/2014 (4th May'14- 10th May'14) with retro effective 01/01/2014 as per the benefit plan record maintained from 01/01/2014.
    This error msg is coming only for few employees. In my example, when I am running payroll in period 20/2014 with forced retro as 01/01/2014, system is giving error in period 14/2014 (23rd Mar'14-29th Mar'14). When I checked the pay result of this employee for period 14/2014, I can see the /101 is in -ve value and there is claim generated for this period. So I think, eventhough, a value of $ 2.53 is getting added as per the IT 0168 record, its not helping to give a +ve gross value and thus tax is not able to recoved on the same.
    I hope you have come across this issue and can help me to assist to resolve the error msg.
    Regards,
    Prakash  

    If you have correctly configured payroll the system should automatically off set that and should create wage tyes /561 or /563 in RT.

  • Search Server Error - Illegal operation attempted on a registry key that has been marked for deletion

    Hello,
    I have a 5 server farm (DC, 2 WFEs, 1 SQL,1 CA w/ search) and am experiencing an issue when returning search results.  This issue just started occurring recently, and basically the search page throws a correlation id whenever used.  The error returned
    is:
    SearchServiceApplication::Execute--Exception: System.Runtime.InteropServices.COMException (0x800703FA): Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
    SearchServiceApplicationProxy::Execute--Error occured: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA) (Fault Detail
    is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.Runtime.InteropServices.COMException: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
    I even attempted to create an out of the box enterprise search site with OOB masterpages and I still am receiving this error.  
    I have also tried the  ‘Do not forcefully unload the registry at user logoff’ registry edit, but it did not work.
    Has anyone ran into this issue and has another solution other than the ‘Do not forcefully unload the registry at user logoff’ registry edit?
    Thanks!

    IISReset works for me (but after some time it fails again)
    Check this posts: http://pacsharepoint.com/2011/11/sharepoint-search-illegal-operation.html
    http://blogs.msdn.com/b/distributedservices/archive/2009/11/06/a-com-server-application-may-stop-working-on-windows-server-2008.aspx
    hope it helps,

  • I can't figure out how to log off of my daughter's iTunes account that has been loaded to my PC.  When I want to sync my iPhone, I get her data, not mine.

    I can't figure out how to log off of my daughter's iTunes account that has been loaded to my PC.  When I want to sync my iPhone, I get her data, not mine.

    Hi, Abril_Perez17.
    This may be related to a new feature embedded in iOS7 that shows all purchased music by default.  Go to Settings > Music, then turn off Show All Music.  See if the issue ceases once the feature has been disabled.  This information is located on page 63 of the user guide below. 
    iPhone User Guide
    Regards,
    Jason H. 

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • Have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where photshop wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation

    I have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where phootshop 6 wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation issues with pse6 on this same pc.  Pse6 was installed and working on vista 64bit version of the OS, now won't install on rebuilt windows professional 7 32bit (keeps giving me serial number not valid errors).  I'm not trying to pirate these programs.  Just want to reinstall them.

    you need,
    Windows 98, Windows 2000, Windows NT 4.0 with Service Pack 4, 5, or 6a, or Windows Millennium
    Microsoft Windows 98/Millennium/2000/NT 4.0 (Service Pack 4, 5, or 6a required)

  • When entering my phone serial number it shows "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."

    Hi,
    I had purchased an iPhone 5 last month and got the OS updated to iOS 7, yesterday.
    The data cable was of very bad quality and when I took it to the retailer for replacement, they said that its not covered under the one year warranty.
    Secondly, I have also been experiencing network coverage issues with this phone. So, I decided to contact apple care through the web. When entering my serial number/IMEI it says, "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."
    Does anybody have any idea what the reason behind this could be.
    - First time with iPhone and frustrated.
    Briju

    If you purchased the iPhone from Apple or an authorized Apple reseller,
    contact them for assistance. If you purchased elsewhere, go back
    to that retailer and get them to give you a new iPhone or your money
    back.
    If you have checked the serial number carefully and re-entered it
    and that gave you the same error message, contact Apple if purchased
    from Apple or authorized retailer; otherwise you have been scammed
    and need to pursue the matter with the business you obtained the
    iPhone from.

Maybe you are looking for

  • No service user name found for Integration Server

    Hi All, Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above

  • Inbound idoc to R/3 from XI

    Hi , i am trying to post an idoc from Xi to R/3 system . I m using a file system as the input for the idoc and later using a communication channel of idoc adapter type to transfer the idc thus generated to the R/3 system . The file syetm i m using is

  • Problem in J1IG transaction

    Dear All, when iam doing incoming invoice J1IG for Depot STO system is saying Material is not exist in the document. But when iam checking the J1IIN and MIGO and MMBE stock is very much showing with Batch. Could any one light on this. Kesai sai

  • Painting on a part of an Button(AWT): Is it possible?

    Hi all! I am displaying several Buttons on an Panel. When mousepressed on some of the buttons, more buttons will display on the panel. FOr this reason, I want to make sure the user can see which Buttons can display more buttons, and for this reason I

  • Converting from RGB to CMYK

    A client gave me a PNG made in Fireworks, and I need to pretty much convert this over to a CMYK file that I can send to a printer. SOme pointers would be greatly appreciated...