Value Set  error msg when opening sales order Form

Hi
I created a value Set(where the values are populated at run time based on a view) which is attached to DFF (column eg Attribute13),The Value set would get value populated only if any sales order lines are cancelled, as the value of Attribute13 on cancelled line would be inserted to new Order Line.
The Problem is when ever the Sales order Form is opened it throws the error message
"Value XX For the FlexField Segment dosent not exists in the valueset (Valueset name)" as the oe_order_lines_all.attribute13 has value and the value set has null, it matches it and throw the above error.
Could you guys give any suggestion how to avoid it, or is there any workarould , Thanks
Thanks

This tells me that the same attribute is used for something else and there is a value in that the column that is not your table which you are validating against. Or the value you are setting is not in that table.
About the context: If the same attribute is used under a different context AND if that context gets set when you open the sales order AND if the validation type is different under that context for attribute13, you will get this error.
Thanks
Nagamohan

Similar Messages

  • Upgraded  2007 to 8.8 PL15 and get error message when opening sales orders

    Hi ,  I have upgraded an SBO system from 2007 to 8.8, PL15 and I get an error message whenever I recall a sales order entered after June 9th 2010.  I do not get any error messgas on orders before that date.  I can add new order no problem.   Teh error message is:
    1). [Microsoft][SQL Server Native Client 10.0][SQL Server]The conversion of a nvarchar data type to a datetime data type resulted in an out-of-range value.
    '' (CRD2)
    I have not got any UDFs that are date type...
    Any ideas?
    Thanks in advance!
    Simon

    Dear Simon,
    Issue could be related to SBO_SP_TransactionNotification. Please comment out the code in the store procedure SBO_SP_TransactionNotification (Section: ADD YOUR CODE HERE)
    and try to reproduce the issue again.
    Regards,
    Ladislav Meszaros
    SAP Business One Forum Team

  • Get error msg when opening iphoto from Photoshop: "Open iphoto 5 or later..

    I get an error msg when trying to open a photo in iPhoto from Photoshop: "Open iPhoto 5 or later to see photos from your iPhoto Library in this list." ... but in info it says I have iPhoto '08.... I am confused.... what is iPhoto 5, and how is it different than iPhoto '08? I have not had this issue before today.... previously it was working fine.
    Please email me when answered as it took me a while to find this forum and I'm afraid I won't be able to find it again.
    Thanks,
    <edited by host>

    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Error message when updating Sales Orders

    Hi Experts
    Following an issue over the weekend when I was forced to perform a  hard reset we are now experiencing error message when trying to update some sales orders. 
    This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
    it is not happening on all orders - i think only ones which were on the system prior to the reset.
    We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
    Event Type:     Error
    Event Source:     B1SynchService
    Event Category:     None
    Event ID:     0
    Date:          29/06/2009
    Time:          13:42:38
    User:          N/A
    Computer:     SQL01
    Description:
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
       at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
       at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
       at NetPoint.SynchSBO.Synch.SetCompany()
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
       at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
       at NetPoint.SynchService.NPSynchService.Main(String[] args)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
    Regards
    Jon

    Dear Johnny,
    the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
    Hope my reply helps you to solve the issue.
    Regards,
    Wesley Honorato

  • Condition Values not being copied when creating sales order with reference

    hi experts
    i am copy a sales order with reference in va01 , when i copy the order it status is shown as incomplete beacue the condition values in some condition type sis zero, whereas if i delete amount for some condition type and re-eneter it the condition values for all conditon types appears ...
    in all after copying order i go to condition at item level some codition values are zero but if erase amount for any condition type and then re enter it value comes for all condition types

    Hi Sunny,
    Maintain some value against that condition type in VK11.
    This must solve your question. Please set to resolved if it solves your doubt.
    Regards
    Abhii....

  • Error message when printing Sales Order

    Hi,
    I get following error message when printing out a sales order just created.
    No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
    Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
    What could be the problem?
    Thanks,
    Ajay Audich

    Have you tried with system PLD?
    Thanks,
    Gordon

  • 6 lines of red error msgs when opening an InfoPackage

    When I double click an infoPackage to open it, get to a window titled as "Execute Repeat Request"?  with the following 6 lines of red msgs in the sequence as below (see in between two dashed lines):
    Delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV is incorrect in the monitor
    A repeat needs to be requested
    Data target 0BBP_CON still includes delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV
    If the repeat is now loaded, then there could possibly be
    duplicate data in the data targets
    Request the repeat?
    What could cause the problems and how to resolve them?
    Thanks for everyone's input!

    hey Paolo,
    I checked the short dump, but it seems not helpful.  See below in between two dashed lines for the short dump msg:
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
           Occurred on     31.10.2005 at 00:02:12
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
    "(FORM)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    How to correct the error
    The exception must either be prevented, caught within the procedure
    "INSERT_ODS"
    "(FORM)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    Database error text........: "DbSlExeModifyDB6( SQLExecute ): [IBM][CLI
    Driver][DB2/AIX64] SQL0289N Unable to allocate new pages in table space
    "QDW#ODSD". SQLSTATE=57011 row=261"
    Internal call code.........: "[RSQL/INSR//BIC/B0000432000 ]"
    Please check the entries in the system log (Transaction SM21).
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "GP3ZBWN7YYJYC54GT20I6UDDJ2Z " or "GP3ZBWN7YYJYC54GT20I6UDDJ2Z "
    "INSERT_ODS"
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
       To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
       To obtain this, call the system log with Transaction SM21
       and select the "Print" function to print out the relevant
       part.
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
    Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    What could be the reason?
    Thanks

  • Update open sales order values. - Update rule.

    Hi
    In library below information given for the updation of open sales order value in infostructure. Can any one please explaing how can we configure below two rules.
    An update rule describes the set up of the open sales order value, i.e., the open sales order quantity. The second update rule describes the reduction of open sales order value, i.e., the open sales order quantity by the corresponding deliveries.
    http://help.sap.com/saphelp_47x200/helpdata/en/96/dfec3410b5f563e10000009b38f83b/frameset.htm
    Path: LIS - SIS - How the key figures are calculated - open sales order value.
    Thanks in advance.
    Raj.

    Any inputs please.....

  • Where is Open Sales Order Value coming in Credit Master sheet?

    We have a customer whose credit exposure is below credit limit. I'm in Customer Credit Management overview screen and I ran Credit Master sheet report (for this CMR) under Environment -> Reporting -> Credit Master Sheet.
    I see value in Receivables and Open Sales Order Value which sums up to Credit Exposure Value. I'm wondering which sales orders are considered to calculate open sales order value?
    I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value.
    I manually compared Open Sales orders based on Horizon date, the value that I'm arriving is kind of close of Open Sales Order Value in Credit master sheet report.
    Update rule used is 000012 in automatic credit control screen.
    Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
    Appreciate any help!

    . I'm wondering which sales orders are considered to calculate open sales order value?
    Those customer orders which are relevant for credit limit. Please let me know if you are talking about something different?
    I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value
    .You can not compare the VA05 open sales order report with FD32 open sales order report.
    You can find out the open order values of Credit manangement(FD32) in S066 table.
    Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
    For open sales order you can find out  in S066 table and sales values in KNKK table

  • Personalizing Sales Order form OEXOEORD

    Hello there
    I am trying to Personalize to Restrict Values in Customer Number LOV in Sales Order Form.
    Condition
    Trigger Event = WHEN-NEW-ITEM-INSTANCE
    Trigger Object = ORDER.CUSTOMER_NUMBER
    Action
    Seq 10, Type = Builtin
    Builtin Type = Create Record Group from Query
    Argument = (SQL Query for record group creation which is later be assigned to LOV)
    I am trying to restrict the Customer Number LOV to only show one specific account_number.
    The thing i am not able to understand there is Builtin Type = Create Record Group from Query. I am not finding anything like Create Record Group from Query. I could see Do_key or go_item or go_block from builtin type dropdown. How do i approach here.
    Can anyone help me in this regard.
    Thank you

    If you're not seeing the Builtin Type 'Create Record Group from Query' then are you on an earlier version of the apps as I'm sure this feature was not available when forms personalisation was first released?
    If memory serves, I think this functionality became available with 11.5.10 CU2 but don't quote me.
    Given your stated requirement of restricting the LOV to one value, and if you don't have the means to use a custom record group for the reason above, have you considered using a different personaliztion to just assign the value you want to the customer number field and then prevent access to the field? This approach has a couple of drawbacks (assigning a value will give you a 'Do you want to save' message whether or not you've entered any other info) but will give the same end result.
    Regards,
    Jon

  • How to Avoid Open Sales Order Value from Credit Check

    Hello Everyone,
    We have a problem with Credit Management, When my user run the execute credit master sheet, system is considering open sales order value under Credit limit used. My user do not want consider open sales order value, they want only Open delivery and Open Billing value need to appear in Credit limit used.
    Is it possible to avoid open sales order values, if yes what setting i need to do....please help me.
    Thanks
    Sudheer

    Sudheer,
    You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
    In the credit controal settings, you need to have settings for the credit check at the delivery level.
    Hope this will solve your issue.
    Regards,
    Chetan
    Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

    Hi,
       Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
       What could be the reason ?
       Pls help.
    Regrds,
    Binayak
    Message was edited by:
            Binayak Ghosh
    Message was edited by:
            Binayak Ghosh

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Open sales order credit value (S066-OEIKW)

    Hello experts,
    I need to update the table S066 with the Open sales order credit value when an item has no confirmed quantity (VBEP-BMENG). So I have created the new rountine under
    VOFM -> Requirements -> Credit checks -> new include RVKMP901. But I don't know how to update this table.
    From the note 377165, the same is explained. But I am niot able to achieve my requirement.
    So please help me in this regard.
    Waiting for your reply.
    Any Suggestion...
    With regards,
    Vasanth M
    Edited by: Vasanth M on Feb 15, 2010 8:21 PM

    Hello Jack,
    Thanks fo your answer. But I have to update the credit amount to the table S066.
    This credit limit could be viewed in the TC FD33. So please suggest me what to do.
    Thanks in Advance
    Best Regards,
    Vasanth M

  • Open sales order value for credit check need to be changed (S066)

    Hi all,
    I need to change open sales order value which is already there in S066 table.
    Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
    Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
    When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
    Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
    Please advise me.
    Regards,
    Babu
    Edited by: babs on May 19, 2010 4:26 PM

    Hi Babs,
    If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
    If you want to modify the value then follow the below process.
    Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
    I hope it will help.
    Regards,
    SK

Maybe you are looking for

  • WM - Report for stock with storage time

    Hi Guru, How can I get a report with material_name, quantity, and their storage time? e.g. part A putaway on 2008/1/1,  100 EA The report will show: material    Qty          storage time part A     100 EA     (2008/12/10 - 2008/1/1) We want to find o

  • Is there a way to run an existing PS-JS script using external interface

    I have several previously written Photoshop JS scripts which I'd like to run through buttons on PS panels, much like the example for the HelloWorld introduction. I assume that--using external interface--I'll somehow be able to fire off these script f

  • Editing a MS Word document on CD

    Okay, I am working on a variety of books which I want to save on CDs so that I can more easily access the individual chapters in order to edit them as I need to.  How the F do I go about doing this?  I inserted a blank CD-RW and saved a chapter to it

  • PO cancellation for back dated process order

    Hi, I want to know how to cancel the confirmation of the process order which has been confirmed in the previous month,because when i go to cors option i get an error saying that the period has been closed.Kindly help Regards, Karthik Rai

  • Adobe Dreamweaver CS3 - Help - Test Server

    Hey, I work for my University on a "Numeracy Inititative", we use Flash Modules develped by Adobe Flash 8, and host them on a website that was developed by Dreamweaver (not sure which version). The website is located here: http://www.uoguelph.ca/nume