Value ZERO in BW
Hi All,
Sales Order and Delivery has been created with one line item and schedule line in R/3.
This record has been loaded into BW (DataSource 2LIS_12_VCSCL)
Eg: DelNumb SalesOrd Lineitem Schedule Line Delqty
1234 123 10 001 50
Later they have deleted schedule line and creted new schedule line for same line item. Which is geting zero for Delqty
Eg DelNumb SalesOrd Line item SchLine Delqty
1234 123 10 002 0
Actually it has to show Delqty for schedule line 001 is 0
Delqty for Schedule Line 002 is 50
My investigation/assumption is When schedule line 001 is deleted Delta couldnt recognize or find any change for this deletion entry.When new schedule line(0002) is created two record are transfered.
When i have checked PSA :
DelNum Salord Schline LineItem Delqty Reversal Indicator
123 123 002 10 50
123 123 002 10 -50 X
123 123 001 10 50
Can any body help
Regards,
Chakri
Message was edited by:
Chakri
Message was edited by:
Chakri
Message was edited by:
Chakri
Message was edited by:
Chakri
If I have understood your problem, the net values is showing correctly in the BW-PSA ie. Del Qty = 50 (50-50+50).
In this it will not overwrite but pass a transaction with the negative value (reversal indicator).
So your getting the right results.
Hope it helps
Thanks
Vinod
PS Please assign points if useful.
Similar Messages
-
Value zero in Intercompany Billing document
Hi,
I am working on Intercomany Stock transfer with SD billing.
Every thing is working fine, except the value in Billing document is zero.
Billing document is generated with value zero.
I do not find any pricing procedure details in billing document.
Please let me know the probable reason for this problem.
Thanks in advance
KumarHi,
Check whether any pricing procedure is assigned to your billing document type.
The path is:
SPRO>Sales and Distribution>Basic functions>Pricing>Pricing Control-->Define and Assign Pricing Procedures.
Assign document pricing procedures to billing types.
Check what is the customer pricing procedure assigned to your customer.
Next Goto "OVKK" T.Code.
Check for your Sales area and all other valid combination wheter the procedure is assigned or not.
Regards,
Krishna. -
How to make FOC order net value zero??
HERE IS THE ISSUE,
when I create foc sales order the item net values should be zero as they are free for charge even if its finds condition records at the back end.
Kindly is there any solution for this issue as I want to make the net value zero.
Thank you,
Sam AhmedHi,
In the item category configuration please choose the ''Pricing'' as B : Pricing for free goods (100% discount). This will activate R100 condition type that discounts the price and makes the net value as zero.
Alternatively, you can change the item category in the sales order to TANN (in standard system) that will make the net value as zero.
Regards,
Palani -
Dear all,
One of my Requirment will fullfill...by entering the Condition value ZERO(0)
But if i try to enter the value Zero..the value is disapperring.
Thanks in advance
regards
raj.Dear Lakshmipathi,
with the ref of this thread Milestone Billing(100% ED)..
i maintained the Header condition type and iam maintaining the value in Billing level.first invoice i'll maintain in header level Full amount so that system will caluculate full taxes..in 2nd milestone i need to maintain the doc value as Zero...so that taxes will not come againg.
Thanks in advance
Regards
raj. -
Need to mark value zero for repairable materials goods movements
Hello Masters,
The scenario is like below:
Materials reach perticular storage locations and goods movement happens with 101K or 102K. For materials of type repairable or non-repairable, we need to make value zero for above movemeny types in process of MIGO.
I feel that there is a work on config or a work on BADI's.
Please suggest feasible solutions ASAP as my business needs these to be in place soon.
Let me know if you need any more inputs.
Thanks in advance.
Ravi ShankarHi,
Check this link:
[Re: Free goods in Purchase]
SAM -
Problem displaying the value zero in dashboard
Hello,
I have a problem displaying the value zero.
When I am Treat Numbers As number, the value that appears
When Treat Numbers As Percentage box is empty.
Can you tell me how to display this value when the criterion
is in percentage format.
thanks for answers
Best regardscast the number as float or multiply by 1.00 e.g. 1.00 * table.column
-
Excise base value ZERO in GR for STO
All SAP gurus,
I have created an STO in which my receiving plant is a depot. I have made an outbound delivery, billing and excise invoice from the supplying plant. Now when I am doing the GR through MIGO and entering the Excise Invoice no. it is showing the excise base value as zero while the BED ECS and SECESS value are flowing correctly from the EI. The system gives an error that the excise base is zero.
Can u pls suggest what can be the issue for the same.Dear Ashish Dhawan,
We are facing a similar problem and would be highly grateful if you could let us know how did the value of material from STO document type UB flow to delivery type NL.
As we are not in position to figure out where excatly the settings needs to be done to make sure the base value along with conditions of STO appears in delivery. Since the delivery value is comming zero, we are not in position to make an excise invoice for the delivery for sending plant by J1IS.
regards,
chetan. -
Hi All
I am doing Stock transfer order from one company to another company , every thing is ok my material is getting transfered to receiving plant but when i am doing billing , in billing doucment net value is zero , and no account doucment generating , following message i am getting ,
__"The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document."__
i want to know whether this is correct or not ? if wrong what need to be done for getting value in billing document .Hi
First of all , whatever error you are getting is correct
If the BIlling value is Zero , No accounting is created.
Now coming to the STO process , kindly check your pricing procedure at what price you are selling it to other company.
Once you have the Ciondition value, then you will get your accounting document once billing is done.
Thanks & Regards -
Dear Gurus,
I am doing STO. There are 5 deliveries done. One Excise invoive created with these deliveries. While doing MIGO for one line item only the excise base picked up is zero... ED..Ecess..are flowing... where have we gone wrong..is this SAP bug...Any note to be applied??
Regards,
RohanYou will have to have a Price condition whose's condition category is H & is non statistical. Else use the exit - J_1I7_USEREXIT_CALC_EXC_BASE.
The notes you can refer to are -
1042035
1035545
If you mark the Condition category as 'H' for the Price condition
which has the assesable value then the Excise base value will flow but the price condition should be non statistical, if it is statistical in your pricing procedure then you will have use the user exit J_1I7_USEREXIT_CALC_EXC_BASE which has the KONV structure , you will have to pass the value to the parameter EXCITM_BASE. -
Making Condition base value ZERO in RF05L-FWBAS
SD-FI Integration masters -
I have a very typical requirement.
I need to have ZERO tax in Billing.
I have made the Tax Rate & Tax base Amt ZERO in RV60AFZZ. I have even tried giving a Tax code that has tax rate ZERO.
Both Invoice & Accounting document both have TAX AMT ZERO -
> BUT
In an accounting document when I click on Taxes (Radio button) [Display document - Tax Data]
It shows Base Amt [RF05L-FWBAS].
Pl let me know where and how I can handle this so it will become ZERO here as well.
This is creating an issue in Tax Report.
Thanking you in advance.
ArunDear Prasaad -
Thanks for you reply.
As mentioned earlier, RV60AFZZ has a code that makes Tax %, Tax Base Amt ZERO.
Even I changed the appropriate tax code that will make everything ZERO.
Both Invoice and Accounting document DO NOT HAVE TAX AT ALL & RF05L-FWBAS is having a value which I don't want.
Pl look into this & let me know if you need anything.
Thanks
Arun -
Return of Excisable Motor with mtl asseable value zero with ED Value
We have an Exciseble Motor which we procured before our SAP Implantation. For the same capital item we availed Excise duty for two consecutive years(First year 50% and Second year 50%). Now the same capital item we are converted under asset and capitalized. The relevant depreciation run also takes place for the same. Now we want to return the Motor to the supplier with a Non returnable Gate Pass. There wonu2019t be any replacement for the same. How can i bring back in to my regular stocks the same Material from asset list .Hence kindly suggest the relevant procedure for the same.
Suppose I want to send the Motor with Excise Gate pass Zero Value and I want to reverse the Excisable amounts only like ED 16%4%1% only then what is the best procedure for doing the same. I need to change any configuration in this regard or other feasible solution in the sales route? Your valuable suggestions will help me a lot.
Thanks and Regards
NaagsekharHi
Was your material caplized thorugh System?
Create the Vendor return Doc,
Maintain the chapter id in J1ID with 16% details for this transction only and also maintain asseable value in Material Masterial
Go to J1IH and make the excise challan. the system will only propose the ED once the Assesable Value is mainatined,
If still its not picking up correct you can also change the same manuly and you also try 'Get Excise Invoice'
Hope it will work for you
Niti Narayan -
Characteristic value zero show as #
Hi
In the HR cube 0PA_C01 'Headcount and Personnel Actions' there is a characteristic 0SRVCLEN for 'Length of service'. If an employee has less than one year seniority the value is 0, but in queries it is shown as '#'.
This may very well be the nature of a 'blank' characteristic, but in this case it is very annoying.
I would like to show a 0 (zero) as characteristic value. Can anybody help?
PS. The characteristic 0SRVCLEN should not be confused with the key figure 0SRVCLENKYF
Regards
Knud Pinholtfor the workbook use the vba macros sapbexonrefresh()
refer to the below link:
Re: How to display '#' as blank?
Regards,
BWer
Assign points if helpful. -
How to delete decimal values zeros
Hi experts,
i am using mseg-menge field ( lenth13 and decimals 3) in my alv grid report.
eg: 2.3456.000
user wants only 2.3456 no decimals.
how we can aviod decimals 0 s in report.
thanks in advance.
mahaheI search this ways in the forums:
Shift
SHIFT varb1 RIGHT DELETING TRAILING '0'.
write: gv_variable decimals 0.
SHIFT VALUE LEFT DELETING LEADING '0'.
Shift2
DATA: T(14) VALUE ' abcdefghij',
STRING LIKE T,
STR(6) VALUE 'ghijkl'.
STRING = T.
WRITE STRING.
SHIFT STRING LEFT DELETING LEADING SPACE (or use 0 to detete 0).
WRITE / STRING.
STRING = T.
SHIFT STRING RIGHT DELETING TRAILING STR or 0.
WRITE / STRING.
Shift3
data amt(6) type p decimals 3 value '123.450'.
data amt1(6) type p decimals 2.
data amt_c(6) type c.
unpack amt to amt_c.
shift amt_c right deleting trailing '0'.
pack amt_c to amt1.
write amt1.
use FM
FTR_CORR_SWIFT_DELETE_ENDZERO
this FM will remove all the zeros from decimal values like
value - 234.8000000
output - 234.8
IF
data: var1 type p decimals 3,
var2 type p decimals 2,
var3 type p decimals 1.
move '12345.100' to var1.
move var1 to var2.
move var1 to var3.
if var2 = var1.
if var3 = var1.
write var3.
else.
write var2.
endif.
else.
write var1.
endif.
I hope that this solve your problem.
Cordial greetings. -
Condition value routine getting value zero at header level.
Hi Gurus,
I am trying to create one condition value routine in which I am passing xkwert = ( wa_vbap-cmpre * komp-mglme ) / 1000.
The condition works fine at item level where I get condition value as desired but at the header level, where it should show sum for all line items, it is showing 0. When I debugged, I found that somewhere in standard program, where it sums for line item, it is changing to negative and that is why it is getting zero but I was not able to correct it.
I am writing the code as follows.
DATA: wa_tab TYPE c LENGTH 1000,
I_VBAP TYPE STANDARD TABLE OF VBAP,
lv_komv like xkomv,
WA_VBAP TYPE VBAP.
FIELD-SYMBOLS <f1> TYPE ANY TABLE.
UNASSIGN <f1>.
wa_tab = '(SAPMV50A)XVBAP[]'.
ASSIGN (wa_tab) TO <f1>.
IF sy-subrc = 0.
i_vbap[] = <f1>.
ENDIF.
READ TABLE i_vbap INTO wa_vbap WITH KEY posnr = komp-kposn.
IF sy-subrc = 0.
xkwert = ( wa_vbap-cmpre * komp-mglme ) / 1000.
CLEAR wa_vbap.
ENDIF.
CLEAR: I_VBAP,
lv_komv.
What should I do? please help.
Regards,
ManishI found the solution.
If xkwert is initial.
xkwert = gkomv-xkwert.
endif.
Regards,
Manish -
Validation Condition: value zero
Dear Experts,
we try to find a way to set up a validation wich checks:
if the value at item 123 is greater than zero ==> than the value at item 456 should be greater than zero as well.
We thought about a condition but we cannot set up a condition, that contains a certain value. We tested the following formula:
CONDITION (LC_YTD(item123)>0) ==> LC_YTD(item 456) >0
With this formula we receive the error message that "Formula element does not match type BOOLEAN".
Do you have any idea, how we can do this validation?
Thank you!
Regards
KatharinaHi Katharina,
You may try the following:
LC_YTD(item123)>0 AND LC_YTD(item 456) >0
or
LC_YTD(item123)>0 ==> LC_YTD(item 456) >0
Edited by: Eugene Khusainov on Jun 1, 2010 10:06 AM
Maybe you are looking for
-
My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says i
-
I used to know the trick for displaying audiobooks in an organized fashion on my iPod. You removed "Audiobooks" from the main menu, then navigated through Genre > Audiobook instead. There you would see your books grouped nicely by author \ title. N
-
Can see artwork in navigator but no on artboard, why??
when i open a particular file i can see the artwork in the navigator but not on the artboard.. (in CS4). If i hover over the artboard i can see the outlines of the art but can't seem to be able to view the whole artboard to see the entire file... wha
-
Restriction for release of billing document to accounting
Hi All, Need you inputs for meeting the below requirement. There is a requirement to control the release of billing document of a certain billing type to accounting based on certain users. The posting block has already been ticked at the definition o
-
HP Pavillion DV6758US compatibility with 320GB 7200 RPM hard disk
Hi, My exsisting laptop harddisk (250GB 2.5" 5400RPM Western Digital) is no longer working. Can i replace it with a 2.5" 320 GB 7200RPM Seagate momentus XT harddisk Is this supported on my laptop and does it require any bios upgrade?