Values are fine on my CR developer desktop but become all zeroes when ran in the Crystal Viewer
Post Author: RobertICBC
CA Forum: Data Connectivity and SQL
I am using CR v. 11.5 and have developed a report using an Oracle table as a datasource. The table is small with a lot of summary data. I have used a number of running totals for display fields. There is also a chart that displays totals over time. My problem is that the report displays all the correct values when I preview the report in the Crystal Designer but when I save it to the Crystal Server development environment and run it with the same parameters, I get zero values for all fields. The chart however appears as it does in developer. Anybody run into a similar problem.
Post Author: yangster
CA Forum: Data Connectivity and SQL
are you publishing this to a bo xi r2 server?are you using the same datasource in both enviroments?do you get any results for any parameters not just the ones you've been testing with?
Similar Messages
-
I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
The box displayed:
Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
What do I need to do to bring the correct library into the transportable code?Hello,
I was unable to reproduce the behavior that you saw. I was able to deploy my application with the Linear Fit PtByPt without issues.
Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
Justin Parker
National Instruments
Product Support Engineer -
Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?
values are not getting updated in 'stocks App' in my i4 phone. What is the solution?
you have encountered activation lock. Read iCloud: Activation Lock
-
I downloaded podcast from a polish radio site. They are fine and working on my macpro but when I try to copy them to my ipod I get a massage that " this podcast can not be played on this ipod" . what can I do?
Or because the episodes are video but are in a format which plays on iTunes but not on an iPod Touch. Only the originator of the podcast can do anything about that.
-
my emails are not being sent from my desktop, but they are capable of being sent from my iphone 5. Whatever I have sent just disappears from my desktop.
R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
http://support.microsoft.com/kb/2758902
R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
Thanks for the understanding.
Steve Fan
TechNet Community Support -
The desktop of MacBookPro is cut when displayed in the 27"LED cinema disply
the desktop of MacBookPro is cut when displayed in the 27" LED cinema display although the resolution of the display is 2560 x 1440 how can i make it cover all the display ?
i found a resolution with comment called stretch but i didn't like the quality
RegardsTry moving the cursor off both the left and right sides of the MBP's display. It could be the displays are just not arranged as you expect them.
This can be altered by going into Displays Preferences and, under the Arrangement tab, you can move the small blue rectangles, meant to represent the two displays, into an order which matches their true arrangement. -
i have missing songs that i purchased on my old iphone. they are not in my purchased folder. but in itunes store when i look the song up, it has the purchased logo next to it.... but no way to download it
If the songs are still on your ipod, make sure autosync is disabled in iTunes on your computer, connect and right click on it in the device list, then choose "transfer purchases" to copy all bought media and apps from your ipod to your computer.
If the songs are not on your computer and got deleted from your ipod as well, you can't get them back, unless you have a backup of your iTunes library as part of your computer backup. -
I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.
Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg. -
i have an iphone 4.my wifi was working fine on ios 6.1.3.but since i upgraded to ios 7 ,the wifi randomy disconnects,then connects ,then disconnects again and again???
Try going to settings/general/reset/reset network settings and do that
-
I've just subscribed to Acrobat Pro. Application manager is on desktop, but no Pro. When I open a PDF to edit, it's just Reader. What do i need to do to get the Pro?
Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/ -
My MacBook Pro shows the "Macintosh HD" icon on the desktop but my MacBook Air does NOT show the icon on it's desktop. Is this normal? If not, how do I remount the MacBook Air "Macintosh HD" icon on it's desktop?
Is it showing in the Finder?
If so, then this is normal.
Cheers,
GB -
Qry return same value for a particular column for each row but not all time
hi,
We recently migrated to Oracle Database 10.2.0.3.0 from 9i. We were using a sql to populate a table and it had been running fine. After migration the same sql is fetching / population incorrect values, but not everytime. If we run the same sql again it gives a correct result.
Ex:
insert into a1 ( col1, col2, col3 )
select a.field1, b.field2, c.field
from tab1 a, tab2 b, tab3 c
where a.field = b.field
and b.field (+) = c.field
something like this. Let us assume it fetches 200 rows
But sometimes the col1 has the same value for all the 200 rows and col2, col3 has correct values. If we run the same sql next time, the col1 fetches the correct value and everything is correct.
Could someone help on the above issue.I know it's difficult but can you put together a small test case for us to reproduce this behaviour? Did you contact Oracle Support?
Any special constructs used behind the scenes? Virtual private database? Views?Materialized Views? Anything else? -
Hi I have a year old Macbook pro. I was using a miniport to connect it to the TV via HDM cable. It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work. When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop. Please any suggestions, thanks??
Hello nothingissecret
Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Hi
I have recently bought a white iPhone 4S on Tuesday, and it has been repeatedly loosing all connection and just suddenly switching off.
When this happens I am unable to turn the phone back on again without a power source plugged into it. When I try to remove the phone from the power source it goes completely dead again.
However, the most recent time this has happened (today), as soon as I returned home the phone had no problem starting up as normal when I pressed the power button.
The signal was working fine even though it says 'searching' in the left hand top corner of the screen. I am wondering if my WIFI at home is influencing the phone to work inside the household?
This is a problem that needs to be sorted out ASAP because the phone is not working the majority of the time when I need it to.
Please if you have any suggestions or know the cause of this problem inform me straight away.
Would be much appreciated.
Thank you.Try connecting it to your iTunes library in Recovery Mode and restoring it. See this article for help on getting your iPod into Recovery Mode.
http://support.apple.com/kb/ht1808
B-rock -
I photos on Desktop, but need them dropped into my Flashdrive.. why can't I find it?
Look in Finder's menubar, Finder > Preferences > General tab > check external disks
Maybe you are looking for
-
Ios 8.0.2 list of issues on my iphone 5s
I Have the following problems: 1. Random capitalizations as you can see above. 2. Shortcuts in Safari causes a crash. I have "em" and "emm" as 2 different shortcuts. But just by typing that, safari crashes. 3. All of my apps crash. Even settings and
-
Send Request to servlet every time with the back button
Hi, We are designing a web site in which all the pages are dynamic depending on what he does with his ordering system. Problem is when the uers request a change to the orders (eg deletes) the page is generated again. But the user can use the back but
-
JDev 10g 10.1.2.1.0 - Diagram View Flicker
I'm new at this so bear with me... I installed JDev on my laptop last week. It was working fine until yesterday when the .bpel)'s diagram view began to flicker significantly whenever the mouse was dragged over it. Additionally, the edit menus for the
-
I've bought an optical super drive for a macbook air but although I can hear there is power I can't see the drive in menus
-
HT5312 I need to rescue my security questions, how I do it?
Hi, I forgot my security questions, how the rescue?