Values are generating in the prepopulated fields from the XML data sourece I binded to the fields

Hello,
Fairly new here.
I am trying to insert the payrate and name values in a pdf document on LiveCycle. I created the XML file from our access database (about 1100 names), created the text fields using the same field names in the XML file, connected the XML file in liveCycle, binded the fields but when I convert to PDF nothing is there. I think my issue is the script in the XML file. Has anyone else come across this issue. Please help me with what I am doing incorrectly.
I am hoping to just hit a button and 1100 documents will generate with the two fields prefilled. Am I dreaming?
Thank you in advance for your time.

Are the data values wildy different? i.e. Completely wrong, or are they off due to rounding?
I would start with member formulas and make sure that any in the BSO cube have been re-created in the ASO cube.
I guess, also double check that the level 0 export loaded, with no rejects.

Similar Messages

Web Service Task - XML Task - values are empty while trying to read from XPATH. Can someone help me on this ?

Hi,
I have to fetch Emp details (emp code, last name, first name ...etc) from a WSDL.
for this i have created HTTP connection -> created Web Service Task -> created XML Tasks for those emp code, last name, first name ... etc for each -> set a
breakpoint over post execution -> verified & found that the variables are blank though my
results variable has some XML data generated.
please see some screenshots as below & suggest me how to get is succeed & put the values in database table:

Thanks a lot in advance !!! :)
best regards,
Venkat

BO XI Desk-I graph The negative values are rising form the lowest value up

The negative values are rising form the lowest value up. Instead of dropping from the Zero-line. Where is the problem originating? BO FP2.3.
The positives values are also rising from the lowest value up.
The problem only occurs withing Desk-I. Within Web-I this problem does not occur.
Edited by: A. SMULDERS on Sep 7, 2010 10:35 AM

Hi
Try with the following symbol in the field
&ITAB-NETWR(>)& - will write the sign as (100.00-)
&ITAB-NETWR(<)& - will write the sign as (-100.00)
and based on some field in the program write like
If itab-shkzg = 'H'.
itab-netwr = itab-netwe * -1.
endif.
and try to print this field in the form.
Reward points for useful Answers
Regards
Anji

How to get the values of all elements and sub elements from following xml

how to get the values of all elements and sub elements from following xml...
<?xml version="1.0" encoding="UTF-8" ?>
<List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
<TransactionID>TransactionID</TransactionID>
<Match>
<Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
<List_Matched_Field>
<FSFM_Matches>
<NUMBER>NUMBER</NUMBER>
<TERROR>TERROR</TERROR>
<TU>TU</TU>
<NAMEU>NAMEU</NAMEU>
<DESCRIPT>DESCRIPT</DESCRIPT>
<KODCR>KODCR</KODCR>
<KODCN>KODCN</KODCN>
<AMR>AMR</AMR>
<ADDRESS>ADDRESS</ADDRESS>
<SD>SD</SD>
<RG>RG</RG>
<ND>ND</ND>
<VD>VD</VD>
<GR>GR</GR>
<YR>YR</YR>
<MR>MR</MR>
<CB_DATE>CB_DATE</CB_DATE>
<CE_DATE>CE_DATE</CE_DATE>
<DIRECTOR>DIRECTOR</DIRECTOR>
<FOUNDER>FOUNDER</FOUNDER>
<TERRTYPE>TERRTYPE</TERRTYPE>
</FSFM_Matches>
<OfacMatchDetails>
<UID>UID</UID>
<TITLE>TITLE</TITLE>
<SDNTYPE>SDNTYPE</SDNTYPE>
<REMARKS>REMARKS</REMARKS>
<ID_UID>ID_UID</ID_UID>
<IDTYPE>IDTYPE</IDTYPE>
<IDNUMBER>IDNUMBER</IDNUMBER>
<IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
<ISSUEDATE>ISSUEDATE</ISSUEDATE>
<EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
<ADDRESS1>ADDRESS1</ADDRESS1>
<ADDRESS2>ADDRESS2</ADDRESS2>
<ADDRESS3>ADDRESS3</ADDRESS3>
<CITY>CITY</CITY>
<STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
<POSTALCODE>POSTALCODE</POSTALCODE>
<COUNTRY>COUNTRY</COUNTRY>
</OfacMatchDetails>
</List_Matched_Field>
</Match>
</List_AML_Finacle>

avoid multi post
http://forum.java.sun.com/thread.jspa?threadID=5249519

Restricted values are seen in the query

I have restricted few values in the query. when i execute the query those restricted values are displayed on the top. can any one tell me how to remove it.

As Paveen suggested, Open the Analyzer...instead of opening a query, open a workbook(the one you have saved already). Here, you van change the variable also and execute. It wont have restrivted value.
Thanks...
Shambhu

BW 7.3 Error in DTP if the values are char for the char field

Hi,
I have created a field with
Eg: Field1 CHAR 7 -> i have removed the ALPHA conversion
I am loading the data from ECC if the values are
AA0-992 or AA1-AT1 there is no issue it is getting loaded
but when i am getting the values as AAA-BBB it throws an error.
In RSKC "-" is allowed CHAR.
Can someone help becuase as this is the CHAR field it should accept
Thanks

Hi,
I resolved in between we had the lower case characteris so that thrown and error.
Thanks

Custom Field values are not saved. when MPP imported from another instance.

Hello Mate-
Currently I am merging one small instance (I2) of PWA in our corporate instance(I1). as the corporate instance is huge, we are doing manual merge of groups, securities, users, custom fields etc. also downloading the MPP as xml from I2 and then planned
to publish from I1.
There are few project level custom fields which are being used in MPP. and those fields may have formulas too.
I created same custom field in crporate environment(I1) but while trying to open the projects in our corporate environment(I1), the project custom fields are gone.
Could you please guide me here, I am lost. I can not do a data base migration ans it would override all data from I1 instance so need to do it manually.
Many thanks
Deb
Dev EPM Consultant

Hi
You may not be able to do this as the custom field GUID's are different in both the instance.
You may write a macro to copy the custom field data from one to another one
refer :http://msdn.microsoft.com/en-us/library/office/ff867798(v=office.15).aspx
--Happy Troubleshooting
Thanks --Ajith

Commas not correctly processed when values are passed through the URL!!!!!!

I think this is a bug. Any information about this will be greatly appreciated. Here's the scenario:
There's a single page with 2 regions. The first region contains a simple SQL report. The second region is and HTML region that contains text and date form elements. The SQL report has a column link "Edit" that when pressed it populates form elements in the HTML region. The population of the form elements is done by passing the column values of the select row as variables along the URL. The problem is that commas within column value text are processed as delimiters in the URL. From my understanding and documentation, variables and their values are supposed to look like this:
f?p=6000:6004:&APP_SESSION.::NO:6003:MY_ITEM1,MY_ITEM2,MY_ITEM3:1234,,5678
where MY_ITEM1 will be set to 1234, MY_ITEM2 will be set to null and MY_ITEM3 will be set to 5678 (The URL was copied directly from the Apex 3.0 documentation without modification).
However if the first value is text (lets say "some,thing") that contains a comma, then MY_ITEM1 will be set to the text preceding the comma in the first value (some), the MY_ITEM2 will be set to the text that comes after the comma in the first value (thing) NOT null and MY_ITEM3 will be set to null NOT 5678. Clearly, one would think that the comma in the first value should be escaped given that commas are used as delimiters of values in this URL scheme.
The URL looks like this:
f?p=6000:6004:&APP_SESSION.::NO:6003:MY_ITEM1,MY_ITEM2,MY_ITEM3:some%2Cthing%2C%2C5678
However the URL should look like this:
f?p=6000:6004:&APP_SESSION.::NO:6003:MY_ITEM1,MY_ITEM2,MY_ITEM3:some%2Cthing,,5678
where MY_ITEM1 is set to "some,thing", MY_ITEM2 is null and MY_ITEM3 is set to 5678
What does all this mean? This means that the escaped commas (%2C) are used as delimiters for the values. Additionally, any information that is passed that contains a comma will have it's comma escaped as well AND still considered as delimiters for values in the URL. Not to mention it's inconsistent with the official documentation.

Never mind... problem solved.
In the Apex docs says that you can embed commas if used within backslashes like: \123,45\.
So in order to pass text that has a comma through the URL, one must force Apex to code the URL like this (assuming that the text is coming from a report):
f?p=6000:6004:&APP_SESSION.::NO:6003:MY_ITEM1,MY_ITEM2,MY_ITEM3:\#A_COLUMN#\,,5678
Sorry... no bug. :)

What values are stored in the alignment region of an image and how can they be set?

I am calling a number of C++ functions with different variable sized LabView images at rates in excess of 20 images per second. I need to tell the C++ code developer what values to expect in the alignment region of the image. Right now I am creating an image with a zero border that is 32 byte aligned, so there is no alignment region and everything works fine.
I would like to move to using normal LabView images, as it saves sereval steps and allows me to use a combination of LabView and C++ operations. I do not want to re-write all the C++ functions to be aware of the LabView alignment and border areas. I just want the alignment area and border area to be zero and process them like they were part of the image.
I can set the border region to zero using Fill Image but I am not clear as to what the values will be in the alignment region, or if I can set them. Does Fill Image also fill the alignment region? Since the C++ code is being developed on a system without LabView, and I do not have the means to debug it on my LabView system, it is tricky to know what is in this region.
In the ideal world, I would like it to be zero or to be able to set it to zero.
Thanks in advance.
Andrew

Hi Andrew,
The function IMAQ Fill Image allows you to set the border and all or part of your image to a certain pixel value that you define. One of the inputs to Fill Image is "Image Mask" which you can use to specify which pixels in your original image will be modified. This help document describes the Fill Image VI in detail and can provide some good information for you.
Essentially, the locations of any non-zero pixels in your Image Mask are where the new pixel value will be set in your original Image. Does that make sense? So if you know where your alignment region is then you can use an image mask with Fill Image to set the alignment region and the border to zero. If you don't use an Image Mask, the Fill Image VI will assign the new pixel value to the entire original image.
Regards,
Daniel H.
Customer Education Product Support Engineer
National Instruments
Certified LabVIEW Developer

How can I generate a real-time highchart from my database data?

I have looked several links; however, I couldn't find a working demo showing how to implement a highchart using data from a database.
Objective: I want to generate a real time highchart line graph getting data from my database. What I want is very similar to the
HighChart Demo which provides a real-time highchart with randomly generated values. It is also similar by X-axis and Y-axis, for I want my x-axis to be "Time" (I have a DateTime column in my database) and y-axis to be an integer (I have
a variable for that as well in my database).
Please I need help in sending the model data to my razor view.
Note that I am already using SignalR to display a realtime table. I also want to know if it can be used to automatically update the highchart as well.
Below is the code snippet of my script in the view. I have used the code provided in
HighChart Demo link for generating the highchart. Please tell me where should I apply the changes on my code.
@section Scripts{
<script src="~/Scripts/jquery.signalR-2.2.0.js"></script>

<script src="~/SignalR/Hubs"></script>
<script type="text/javascript">
$(document).ready(function () {
// Declare a proxy to reference the hub.
var notifications = $.connection.dataHub;
//debugger;
// Create a function that the hub can call to broadcast messages.
notifications.client.updateMessages = function () {
getAllMessages()
// Start the connection.
$.connection.hub.start().done(function () {
alert("connection started")
getAllMessages();
}).fail(function (e) {
alert(e);
//Highchart
Highcharts.setOptions({
global: {
useUTC: false
//Fill chart
$('#container').highcharts({
chart: {
type: 'spline',
animation: Highcharts.svg, // don't animate in old IE
marginRight: 10,
events: {
load: function () {
// set up the updating of the chart each second
var series = this.series[0];
setInterval(function () {
var x = (new Date()).getTime(), // current time
y = Math.random();
series.addPoint([x, y], true, true);
}, 1000);//300000
title: {
text: 'Live random data'
xAxis: {
type: 'datetime',
tickPixelInterval: 150
yAxis: {
title: {
text: 'Value'
plotLines: [{
value: 0,
width: 1,
color: '#808080'
tooltip: {
formatter: function () {
return '' + this.series.name + ' ' +
Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', this.x) + ' ' +
Highcharts.numberFormat(this.y, 2);
legend: {
enabled: false
exporting: {
enabled: false
series: [{
name: 'Random data',
data: (function () {
// generate an array of random data
var data = [],
time = (new Date()).getTime(),
i;
for (i = -19; i <= 0; i += 1) {
data.push({
x: time + i * 1000,
y: Math.random()
return data;
function getAllMessages() {
var tbl = $('#messagesTable');
var data = @Html.Raw(JsonConvert.SerializeObject(this.Model))
$.ajax({
url: '/nurse/GetMessages',
data: {
id: data.id,
contentType: 'application/html ; charset:utf-8',
type: 'GET',
dataType: 'html'
}).success(function (result) {
tbl.empty().append(result);
$("#g_table").dataTable();
}).error(function (e) {
alert(e);
</script>

Hi Sihem,
Thank you for contacting National Instruments. Using the LabVIEW Real-Time module, you can do development without actually having a target. While viewing the project explorer window, you can do the following steps:
Right click on the project
Select New >> Targets and Devices
Select the "New Target or Device" radio button
Select the target you would like to develop on.Information about the LabVIEW Real-Time Module can be found here.
Regards,
Kevin H
National Instruments
WSN/Wireless DAQ Product Support Engineer

How to select path from an XML data file?

I have an XML data file somewhat like the one below with up to five levels deep (variable). I want the user to be able to pick a path by navigating a tree (i.e. Canada/Alberta/Calgary) and have that path put into a data field. If they only navigate part way into the path (i.e. Mexico/Sonora) then that would go in the data field. I have some control of the structure of the XML as I am creating it from a CSV file.
Any examples or good advice that you can provide is greatly appreciated. I'm OK manipulating XML but am quite a newbie at PDF forms & Javascript.
<location>
 <country name="Canada">
 <prov-state name="British Columbia">
 <city name="Victoria" />
 <city name="Nanaimo" />
 </prov-state>
 <prov-state name="Alberta">
 <city name="Calgary" />
 <city name="Lethbridge" />
 </prov-state>
 </country>
 <country name="Mexico">
 <prov-state name="Sonora">
 <city name="Guaymas" />
 </prov-state>
 </country>
</location>

Not sure I follow ....are you going to give the user a visual representation of the XML and let them choose then you
will put the path into a field?
Paul

Prepopulating Interactive Form with XML Data using VBA

I have an excel spreadsheet with data on it. I need to click on a button that will cause an Interactive PDF form to open and be populated with data from the spreadsheet. To do this I want to use an XML data file. I know how to create the file, but how do I cause the PDF to open in Adobe Reader with the XML data file using VBA? The link needs to be a soft link, in that the name of the XML file could change.
Many thanks for answers.

 strXFDFFile = "c:\temp\" & strFileName & "tmp.xfdf"
 'Open the PDF file
 appPDFInit = True
 Status "Processing " & strFileName
 DoEvents
 ' Create PDF File, if any
 If strXFDFFile <> "" Then
 Dim fldValue As String
 Open strXFDFFile For Output As #1
 Print #1, "<?xml version=""1.0"" encoding=""UTF-8""?>"
 Print #1, "<xfdf xmlns=""http://ns.adobe.com/xfdf/"" xml:space=""preserve"">"
 Print #1, "<f href=""" & strFilePath & strFileName & """/>"
 Print #1, "<fields>"
 For Each fdField In rsData.Fields
 If IsNull(fdField.Value) Then
 fldValue = ""
 Else
 fldValue = fdField.Value
 fldValue = XMLit(fldValue)
 End If
 If InStr(1, fdField.Name, "ID") > 0 Then
 fldValue = Format(fldValue, "##########")
 End If
 If InStr(1, fdField.Name, "ZIP") > 0 Then
 fldValue = Format(fldValue, "#####")
 End If
 If InStr(1, fdField.Name, "Rate") > 0 Then
 fldValue = Format(fldValue, "#0.00#")
 End If
 ' Write #1, fdField.Name,
 Print #1, "<field name=""" & fdField.Name & """>"
 Print #1, "<value>" & fldValue & "</value>"
 Print #1, "</field>"
 Next
 Print #1, "</fields>"
 Print #1, "</xfdf>"
 Close #1
 End If
 Dim x As Long
 For x = 1 To 1000000: Next x
 LaunchPDF.LaunchFile strXFDFFile, 0, 2
Make sure you reference the Adobe Acrobat Browser Control Library under Tools | References
It will merge to Adobe Reader. Note that I have made the strXFDFFile variable unique by including the name of the PDF file. This assures that you can merge to more than one PDF at a time (this is taken from a loop for multiple PDF files). Note that the XFDF file must include the path and the PDF file name in order to open the correct PDF for merging.
I don't have time to explain the code, but if you have any questions let me know.
Daniel H. Smith
Smith Enterpises LLC

Excel sheet values are displayed in Chinese while reading from server in WD

Hi,
I am reading an excel file values, from the excel sheet which is in the server. I am able to the read the values from webdynpro, but the values which i'm getting are in Chinese language. But the excel sheet there in server has the values in English.
Please help on this.
Thanks,
Suresh
Edited by: SureshKumar Arumugam on May 10, 2009 4:01 PM

Hi,
On the Microsoft Side: Ensure that the Excel Sheet - indeed has values in English. It may be that you may be reading the wrong excel sheet in the wrong folder. If not and the characters are in English and you are still reading in other languages - go to [Microsoft Help on Multiple Languages|http://office.microsoft.com/en-us/excel/HP052558391033.aspx]. Follow the procedure and change the languages for only English.
On the SAP Side: If the above still does not work - check if you are using any .xlf files for Chinese. For more information on .xlf files and internationalization, please go to : [Internationalization of WDJ Projects|http://help.sap.com/saphelp_nw04s/helpdata/en/8e/7ce87a2aede645ae3cdc857b791590/frameset.htm]
Thanks.
p256960

How to Display values in order when Multiple values are selected in the Parameter List

HiI have a report which runs on the parameter(SalesPersonName) selected. Report has a group section where for each SalesPersonName we have different actions(Lead,Prospect,Active and so on) he had performed which is the basis for the group.Now if i need multiple Value selection in the parameter,which i am able to acheive but the order in which it gets printed is not the right one.I want intially all the actions performed by one sales person printed and then the second one should start.Can any one help me in this aspect.Thanks in advance

If I understand your report structure correctly - you have one Grouping on Actions. So could you not add another grouping on SalesPersonName above the Actions grouping that you currently have?So the new structure would be:G1 - SalesPersonNameG2 - Actions (current grouping you have) Whether or not you suppress or don't suppress the new grouping is your choice, but it will then force the ordering that you are asking about (assuming I understood)

How to Change the PDF's that are generated once the Payment run completes

Hello All,
After the Payment run completes, it creates a bank file, and check registry etc. Our system also creates a PDF which is sent out to the vendors via email. I need to make some changes to this PDF that is being generated. Where can I do this? The pdf sits in the Business Workplace. Any ideas?
Thanks,
Rashad

It is not possible to change the PDF manually.
You need to change the form assigned for payment advice in FBZP settings.
However, these settings are uniform and across all the vendors.
You cannot put different rules for different vendors.
Regards,
Ravi

Values are generating in the prepopulated fields from the XML data sourece I binded to the fields

Similar Messages

Maybe you are looking for