Values are not gettin gposetd to _TL table
Hi
We have a EO based on a DB view and in turn it is on top of Base and TL table.When we create a row from Ui, i can see only Insert statement for B table and not for TL table from the log.Through ADF BC browser it's inserting fine in two tables again to my surprise.
It's working fine in REL6 and stopped working in REL7.What might be the reason and any check list for me to quickly compare the files from these two codelines for this issue ?
Thanks in Advance,
Naga
I am not sure what do you mean by assigning at two different line. I have assigned the cost element in the source field and in the target field, I have assigned user defined value fields. I have attached that value field to the form which is ultimately extracting report.
Similar Messages
-
Updated (VORowImpl ) values are not reflected in inline POPUP table
Hi Expert,
Currently i am getting exception when i try to update my iterator binding,
Here is my use case,
I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
Then i used the following code
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
itrBinding.executeQuery();
itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
ThanksThanks Frank, Actually i am accessing the client method as follows,
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
empoyeeVO.methodName();
May i know what is the different between accessing the method as shown above and access via the MethodBinding?
How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
Thanks
Edited by: user1022639 on Feb 7, 2012 5:24 PM -
Created a trigger but new values are not inserting in the backup table
I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
create or replace trigger "SUPPQUOTES_AUDIT"
after update or delete on phsuppquotes for each row
begin
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
(:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
end;old values and new
values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
insert into
phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
if (updating) then
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
end if;
gojko adzic
http://gojko.net -
Measure Values are not shown in the pivot tables
Measures without aggregation (in rpd) are not shown in pivot table.
Im trying to add multiple columns in the fact table as measures,one which is summable had has the SUM function and three which are not summable.
The initial report will be as follows and I have been able to get the data displayed.
Year | Month| Company Name| SUM(C1)| C2|C3
However if I pivot the table as follows data in column C2 and C3 are not Displayed.
Columns
Year
Month
Company
Rows
Measure Lablel
Measures
SUM(C1)
C2
C3
Should we have an aggregation rule applued in C2 and C3 ?Yes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.
-
Urgent:-Values are not inserted into the custom table
Hi, I am inserting the data from the custom OAF form into a custom table. Only the WHO columns are populated into the table but no field value is populated into the custom table. I have written the following code -
In CO
if (pageContext.getParameter("Continue") != null)
OAApplicationModule am = pageContext.getRootApplicationModule();
OAViewObject CwkInfo = (OAViewObject)am.findViewObject("CWKInfoVO1");
am.invokeMethod("initializevo");
in AM
public void initializevo()
CWKInfoVOImpl testVo = (CWKInfoVOImpl) this.getCWKInfoVO1();
testVo.insertRow(testVo.createRow());
getTransaction().commit();
Urgent Help is required.
Regards,
AshishHi Ashish,
Double check whether you have attached the correct EO based VO attribute to the columns.
In the Controller
Process Request use the following code:-
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (!pageContext.isFormSubmission())
am.invokeMethod("initQuery", null);
ProcessForm Request
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
System.out.println("Inside Process Form Request");
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("submitButton")!=null)
am.invokeMethod("submit")
AM Code
public void initQuery()
OAViewObject vvo = (OAViewObject)getEmployeeEOVO1();//Give you EO based VO Name
if (!vvo.isPreparedForExecution())
vvo.executeQuery();
Row row = vvo.createRow();
vvo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void submit()
getTransaction().commit();
Import necessage classes.
Thanks
--Anil -
Table control values are not able to read with out a user action.
Hi All,
I am working with a module pool programing and I am calling 3 sub screens into my main normal screen.
In one of the sub screen, I have created a table control and getting the initial values from database and displaying.
Now I try to change the couple of fields in my table control and with out user action (not pressing Enter after changing the values in table control).
I try to save the edited/changed values in table control into the database. But I am not able to do so, since the change values are not able to pick.
My requirement is end user will not do any action(press the enter key ) and he directly presses the save button which is defined in the main normal screen.
Kindly suggest some solution.
Thanks
GeethaHi Geetha,
in SAP Default While pressing save button the modified value will pick up because
Save button will perform enter function also.
Regards,
Thangam.P -
AET Generated field values are not saved.
Hi Gurus,
I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
While debugging I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
Please advice me the soution for the same.
Regards,
Anandthere should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
If not, you can implement that method with below code.
DATA: lv_collection TYPE REF TO if_bol_bo_col,
entity TYPE REF TO cl_crm_bol_entity.
* get collection of dependent nodes
entity ?= focus_bo.
TRY.
lv_collection = entity->get_related_entities(
iv_relation_name = 'BTHeaderCustExt' ).
IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
IF entity->is_changeable( ) = ABAP_TRUE.
TRY.
entity = entity->create_related_entity(
iv_relation_name = 'BTHeaderCustExt' ).
CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
* should never happen
ENDTRY.
IF entity IS BOUND.
CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
lv_collection->add( entity ).
ENDIF.
ENDIF.
ENDIF.
CATCH cx_crm_genil_model_error.
* should never happen
EXIT.
CATCH cx_sy_ref_is_initial.
ENDTRY.
me->set_collection( lv_collection ). -
Parameter values are not showing in in the Organization Parameter form
We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> ParameterHave you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access. -
Excise values are not updating in factory sales
Dear SCN's,
I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
Thanks & Regards,
KumarThe following note explains how you need to update J_2IRG1BAL table.
Note 951955 - CIN: General clarifications for RG1 goods
Have a look at this.
G. Lakshmipathi -
Grand total values are not matching with Detail report
Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanksis your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name? -
Excise values are not copied to Commercial invoice in trading process
Hi All,
I have an issue while creating VF01 the Excise condtion values (BED, AED) not copied to commercial Invoice.
Other inputs about the scenaio:
The process is 1Customer schduleing agreement->outbound delivery->J1IJ->commerical invoice(VF01)
We had vendor agreement in which 3 line items were crated with qty of 500, 1000 and 1500 qty
for the first line item when we created total cycle upto VF01 the Excise values are copied where as for the 2nd and 3rd line items the excise values are not being copied to VF01. Here note the only difference beween these 3 line items is mateial code is different.
J_1irg23d table is showing the BED and AED condtion values for the 2nd 3rd line item aswell.
Checked PO also for the 2nd and 3rd line item showing the Excise tab in which Excise values are showing.
MIGO and MIRO were created with correct PO only
We maintan the condtion reocrds for BED and AED as 100%, what ever the Excise values maintained in MIRO the same will be copied to VF01.
Once again just would like to reconfrim the issue is out of 3 line items of the sheduling agreement for the first line item BED and AED are copying to VF01 where as for the 2nd and 3rd line item BED and AED values not copying to VF01.the only difference is material code between the line items.
Please let me know if you need any further details.
Thanks in advance.Thanks sir for your reply.
have you declared the receiving plant from overseas as a Depot?
Yes it was defined as depo plant in configuration of plant settings.
Actually i should have mentioend total cycle before. However, i have mentioend in my OP as
MIGO and MIRO were created with correct PO only
But anyway please check my total cycle as below.
ME31L (vendor agreement)
MIRO(customer custom vendor payment)
MIGO(with ref Vendor agreement/PO) here the excise duties are captured as well, we will not do seperately JIIG.
MIRO( actual vendor payment)
VA31(customer agreement )
VL01N(outbound delivery)
J1IJ(with ref delivery) here we sellect the MIRO invoice
Vf01( commerecial invoice)
Upto J1IJ all the values calculated and copied ok. Only during VF01 the BED and AED values anot being copied. Even i tried the update button but not updated.
For time being we are entering the BED and AED condition values into VF01.
thanks,
Message was edited by: surya prakash -
Numc characteristic values are not saving in AUSP
Hi All,
I am unable to save numc/Date type characteristic values in AUSP table using CL20N tcode. i am able to retrive CHAR values from AUSP table but NUMC / DATE values are not saving in this table.
Regards,
PraveenHi Praveen,
If you are fetching ATINN from AUSP table, then you need to use conversion routine..
Call the FM CONVERSION_EXIT_ATINN_* & you will get the converted value.
Thanks,
Sharath -
EA Version 4.0 - Partition high-values are not displayed (NULL)
The partition high values are not schon in the "partitions" tab of the table. Only NULL was displayed.
Sorry i slept, this is referenced partitioned table. Only in the parent rtable there will be the high-values displayed.
-
Form values are not submitting to ActionForm class
Hi All,
I have a problem with <html:form> tag. When i am submitting the form using the submit button it is going to the Struts-config.xml file and getting the action mapping for the HazSummary.do. It is getting the HazardSummaryAction class and getting the input from HazardSummary Form class. If result is sucees it is going to the next jsp page.
All above things are happening properly. But the form values are not getting in to the HazardSummaryForm.jav.
Here in this case Action class is HazardSummaryAction.java, Action Form class is HazardSummaryForm.java and jsp page is Hazard.jsp.
Here is the code for Hazard.jsp
<html:form action="/HazSummary.do">
<table width="100%" border="0" style="border-collapse: collapse" bordercolor="#111111" cellpadding="0" cellspacing="0">
<tr colspan="4"><td>
<%String jd="jmd";
String st="closed";%>
<input type="text" name="wkploc" value=<%=jd%>>
<input type="text" name="hastat" value=<%=st%>>
<html:submit property="action">
<bean:message key="haz.save.label"/>
</html:submit>
</td></tr>
</table>
</html:form></body>
Here is the code for HazardSummaryAction.java
package com.prospecta.WSOProject.action;
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public class HazSummaryAction extends Action{
public String hazstatus;
public String workplace;
public String prin1;
public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException
HazardSummaryForm hsf = new HazardSummaryForm();
HttpSession session = request.getSession(true);
try{
hazstatus=hsf.gethastat();
System.out.println(hazstatus);
workplace=hsf.getwkploc();
System.out.println(workplace);
session.setAttribute("stat",hazstatus);
session.setAttribute("loc",workplace);
return mapping.findForward("success");
catch(NullPointerException nex){
return mapping.findForward("failure");
}catch(Exception e)
e.printStackTrace();
return mapping.findForward("failure");
Here is the code for HazardSummaryForm.java
package com.prospecta.WSOProject.action;
import org.apache.struts.action.ActionForm;
public class HazardSummaryForm extends ActionForm {
public String wkploc;
public String hastat;
public void setwkploc(String wkploc)
this.wkploc=wkploc;
public String getwkploc()
return this.wkploc;
public void sethastat(String hastat)
this.hastat=hastat;
public String gethastat()
return this.hastat;
Here is the code for Struts-config.xml file
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<form-beans>
<form-bean name="HazSumForm" type="com.prospecta.WSOProject.action.HazardSummaryForm">
<form-property name="wkploc" type="java.lang.String"/>
<form-property name="hastat" type="java.lang.String"/>
</form-bean>
</form-beans>
<action-mappings>
<action path="/HazSummary" input="/HazSumForm" name="HazSumForm" scope="request" validate="false" type="com.prospecta.WSOProject.action.HazSummaryAction">
<forward name="success" path="/HazardSummary.jsp"/>
<forward name="failure" path="/Hazard.jsp"/>
</action>
</action-mappings>
<controller processorClass="fr.improve.struts.taglib.layout.workflow.LayoutRequestProcessor" locale="true"/>
<message-resources parameter="com.prospecta.WSOProject.ApplicationResources"/>
<plug-in className="org.apache.struts.tiles.TilesPlugin">
<set-property property="definitions-config" value="/WEB-INF/tileDefinitions.xml"/>
<set-property property="moduleAware" value="true"/>
<set-property property="definitions-parser-validate" value="false"/>
</plug-in>
<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames" value="/WEB-INF/validator/validator-rules.xml,/WEB-INF/validator/validations.xml"/>
</plug-in>
</struts-config>
i followed the same process for previous pages which they are working. But in this case it was not working properly.
Please resolve this problem ....................Hi Sreelatha,
When you develop any interactive form please keep in mind the below things which you need to check:
1. The layout type of the form should be ZCI. Select it from the form properties tab in SFP t-code.
2. In web dynpro application (in case you are using for the form), the form type should be selected as native.
3. In the form layout insert web dynpro script using menu->utilities->insert web dynpro script.
4. After that come out of the form and run the report FP_ZCI_UPDATE giving your form name, also select the update check box in the report.
Once these things are done your form should work fine.
Regards,
Vaibhav -
Qualifier values are not part of a qualified lookup record
Hi
I am getting the exception "Qualifier values are not part of a qualified lookup record" when I serach for a record in the Qualified table. The Table has both Qualfier and non-Qualifier fields, but all are of type display fields.
My question is If the filed is of type Qualifier then is it mandatory that it should be non-display Field?
if not can any one suggest me to get the record.
If we make Qualifier fields as NON-Dispaly fields in repository then it is working fine.
Here with I am providing the code
Search serarch = new Search(repoSchemaCmd.getRepositorySchema().getTable("QT_NOTES").getId());
serarch.addSearchItem(new FieldSearchDimension(repoSchemaCmd.getRepositorySchema().getFieldId("QT_NOTES","USER_PMF_ID")),new TextSearchConstraint("test", TextSearchConstraint.EQUALS));
ResultDefinition rd =new ResultDefinition(repoSchemaCmd.getRepositorySchema().getTable("QT_NOTES").getId());
//Returns the array of IDs for all display fields associated with the table
rd.setSelectFields(repoSchemaCmd.getRepositorySchema().getTableSchema("QT_NOTES").getDisplayFieldIds());
RetrieveLimitedRecordsCommand retrievedRecords =new RetrieveLimitedRecordsCommand(conn);
retrievedRecords.setSession(userSessionID);
retrievedRecords.setSearch(serarch);
//retrievedRecords.setIds(RID);
retrievedRecords.setResultDefinition(rd);
try {
retrievedRecords.execute();
} catch (CommandException e) {
throw new CommandException(e);
Regards,
Sandeep.Hi Sandeep
I have a similar problem, would like to know what is the resolution to this issue.
Regards
Dilip
Maybe you are looking for
-
Urgent: dates calculation in alv
hi, i am making ALV report in alv in whihc i ahve to dispaly the difference between two days i.e. DIFFERRENCE = 7 DAYS. CAN anybody provide me the example of it as it is urgent for me. points will be definately rewarded for correct awnser.
-
Does the iPhone 4s have multitasking gestures?
Just wanted to know if the iPhone 4s has the multitasking using gestures feature like the ipad2.
-
Hello experts, I am facing a very strange issue with tree view. I have created a custom component with a tree view. All data are coming in the tree view. But the strange thing is that the data is not getting displayed on the screen. I am sure about t
-
My Iphone 3GS can no longer get ESPN And CBS Sports Podcasts. They only let me place reviews of the podcasts. This happened a week ago. Does anyone know what happened and if there is anything I can do to fix it?
-
Protecting iPad data from unauthorized access
When somebody connects my iPad to his computer with installed iTunes (not my computer, not my iTunes), he is able to view my videos and hear my music as well as delete my data by syncing his own data to my iPad. My iPad is protected by the 4 digit co