Values are not updated in Assets if posted via Purchase order

Hello Gurus,
I have done all the customization relaed to Asset Accounting. When I am trying to procure Assets through Purchase order it is updating quantity but not updating values. Can any one give me some suggestion on this.
Regards,
Pawan Kumar

Hi,
Please check the account assignment category in OME9. Check Category A. GR Receipt will on the basis of non valuated. Just do MIRO. I think your value will be updated.
Regards,
Jigar

Similar Messages

Asset acquisition value is not updating in Asset history sheet & AW01N

Hi,
The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
I have also checked the below link but still i am persisting the same problem.
Asset acquisition value not updating
Regards
Amit

Hi Amit,
check note 366848.
Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.
At first run the report RACORR110_B. Check the field ANLC-ANSWL bevor and after running the report.
The report RACORR110_B accumulates the values of the asset line items and writes the result in the field ANLC-ANSWL.
After this, please start the report RACORR55. This report forwards the values in the following year.
(If this is not the reason (ANLC is correct), the report makes nothing.)
Regards Bernhard

Excise values are not updating in factory sales

Dear SCN's,
I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
Thanks & Regards,
Kumar

The following note explains how you need to update J_2IRG1BAL table.
Note 951955 - CIN: General clarifications for RG1 goods
Have a look at this.
G. Lakshmipathi

Custom propertie's values are not updated for workflow metadata

Hi,
I've a requirement where I need to add and update some properties. to /etc/workflow/instance/<Instancename>/data/metadata node.
I've two workflow Process steps,
Process step 1:
    Adds some properties to metadata.
Process step 2:
    Updates the propertie's values which are added in Process step 1.
But the issue is update is not working when the node is /etc/workflow/instance/<Instancename>/data/metadata.
i.e. In the step 1, Properties are added to metadata node but In the step 2 propertie's values are not updated to the same node.
Here is my process code:
=================================================
import java.util.Locale;
import java.util.StringTokenizer;
import javax.jcr.Node;
import javax.jcr.Session;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Reference;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import javax.jcr.Value;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.model.WorkflowModel;
import org.apache.sling.api.resource.ResourceResolver;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.jcr.resource.JcrResourceUtil;
import org.apache.sling.api.resource.PersistableValueMap;
import org.apache.sling.api.resource.PersistenceException;
import org.apache.sling.api.resource.Resource;
@Component
@Service
@Properties({
       @Property(name = Constants.SERVICE_DESCRIPTION, value = "Test"),
       @Property(name = Constants.SERVICE_VENDOR, value = "Adobe"),
       @Property(name = "process.label", value = "Test 1")})
public class Test1 implements WorkflowProcess
    @Reference
    private ResourceResolverFactory resourceResolverFactory;
          public void execute(WorkItem workItem, WorkflowSession wfsession, MetaDataMap metadata)
                              throws WorkflowException {
                    System.out.println("Testing");
        try{
            ResourceResolver resolver;
            resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
            String instancePath = workItem.getWorkflow().getId();
            Node instanceNode=null;
            Session jcrSession = wfsession.adaptTo(Session.class);
           String payload = (String) workItem.getWorkflowData().getPayload();
           //instanceNode=JcrResourceUtil.createPath(payload+"/jcr:content", "nt:resource","nt:resource", jcrSession, true);
                              instanceNode=JcrResourceUtil.createPath(instancePath+"/data/metaData", "nt:resource","nt:resource", jcrSession, true);
                              System.out.println("Test: instance PAth:"+instanceNode.getPath());
            Resource resource = resolver.getResource(instanceNode.getPath());
                if(resource != null)
                    PersistableValueMap valueMap= resource.adaptTo(PersistableValueMap.class);
                    valueMap.put("name", "Rajesh");
                    valueMap.put("id", "A002");
                    valueMap.put("designation","SE");
                    valueMap.save();
                    System.out.println("Name:"+valueMap.get("name"));
                    System.out.println("Id:"+valueMap.get("id"));
            jcrSession.save();
            resolver.close();
        }catch(Exception e)
            System.out.println("Exception:"+e.getMessage());
===================
The code works fine when the node is payload/jcr:content.
Note : Process 1 and Process 2 code is same expect the values I'm passing to the PersistableValueMap.
Any pointers would be more helpful..
Thanks
Siva

Is there anything wrong in my code/ it's a bug..
Thanks
Siva

KP06 Plan Values are not updating in Cost center report

Hi,
I have configured KP06 and uploaded through excel,It is getting uploaded successfully.
But after uploading planned values are not updating in the S_ ALR_87013611 Report.
What could be the reason.kindly give me some inputs regarding this.
Thanks
Supriya

Hi Supriya,
After uploading the entries have you saved or have you verified with excel values.
Please check.
Sateesh

Excise values are not updating in billing

hi all,
In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
thanks.

Hi MBS,
yes im doing depot process.
I maintained routine 356, and statistical
and i checked pricing procedure analysis tab, where all conditions are activated.
but still values are not fetching or shoeing in billing.
any other solutions.....
thanks.

Editable alv using OO ALV(newly edited row values are not updating )

Hi friends,
i am facing a problem. i am displaying an output alv using OO ALV.
i am creating a new row and validating the newly created row values and changing if it is not according to the criteria. but the newly edited values are not capturing in method
pr_data_changed->mt_inserted_rows as it contains values only entries entered for the first time .
i am not getting the newly edited values in it.
please do the needful.
Thanks and Regards,
srinivas

Hi!
to rectify the problem in the Code.....
You can Go through this program....for changed values....
https://wiki.sdn.sap.com/wiki/x/AwBIBQ
Regards.

Asset values are not updating in ledgers

Dear Experts,
Currently for company code 1000, system calculating depreciation properly and posting,
If there is a change in depreciation % rate, user can able to change the depreciation % in Dep key and successfully posting while running the depreciation run.
Accordingly to the asset dep calculation, retirements, transfers, partial retirements etc there were no issue and everything is working fine for company code 1000.
Only thing is those values not updating L5 ledger.
Regards
Venkat

http://scn.sap.com/message/13115490#13115490
Refer to the above Thread
3. SPRO-Financial Accounting (New)-Financial Accounting Global Settings (New)-Ledgers-Ledger-Define Ledger Group
We have one ledger group, We one leading ledger (OL) and 3 non leading ledger L5 _US GAAP Ledger, L6_IFRS Ledger, L7 _Fiscal year Jan – Dec Ledger and
We have created one ledger group and selected the ledger group and clicked the ledger assignment
Representative Ledger in Group ticked only for the OL ledger, we have to maintain Representative Ledger in Group tick for the remaining non ledger
Also?
Regards,
Venkataswamy

AUC Settlement - values are not updated in all depreciation areas

Dear Friends,
I got a problem with Asset AUC settlement.
We have created a AUC, while creating asset master, we mistakenly deactivated one of depreciation area(area 70). After few days my user run settlement (in the year 2014). When user run settlement all values move to new asset except depreciation area 70 because in AUC asset area 70 is deactivated. But in new asset area 70 is required.
Now user realised it, is there any way to enter values in area 70, becuase we are using parellel ledger concept, area 70 is assigned ot one ledger when user run GL balances system showing differences in balances.
Please help me to solve this issue.
Thanks
Sudheer

Hi Sudheer,
This t.code will activate the dep.areas for all existing assets. If you want to activate for specific assets, then it is not possible. Alternatively, you select the check box "Leave values initial" and run the program. Here the check box will not update any values for the new dep.area for the existing assets. After that create a custom transaction type and limit the transactions for the new dep.area, after that do posting for the asset which you want postings.
Regards,
Mukthar

Query Values are not updated.

Hello All,
While refreshing the query on the cube 0IC_C03, i am not getting the correct values in the query, Cube 0IC_C03 values and query values are differ.
when i Tested inthe RSRV test it shows
"<b>Dimension key 398 missing in dimension table /BI0/D0IC_C03P</b> "
if any one knows plz guide me.
Regards
Chintaps

Hello,
I did not find DIM ID in DImension table. and
when i checked Masterdata consistency check at RSRV level it gives-
There is a inconsisitency in masterdata for 0MATERIAL.
Characters not allowed characteristic values(characteristic 0MATERIAL)
Value in SID table 000001000001/ correct value 000000000001000001/ SID in SID table 41037
Value in SID table 000001000002/ correct value 000000000001000002/ SID in SID table 41038
Value in SID table 000001000003/ correct value 000000000001000003/ SID in SID table 41039
Value in SID table 000001000004/ correct value 000000000001000004/ SID in SID table 41040
Value in SID table 000001000005/ correct value 000000000001000005/ SID in SID table 41041
Value in SID table 000001000006/ correct value 000000000001000006/ SID in SID table 41042
Value in SID table 000001000007/ correct value 000000000001000007/ SID in SID table 41043
Value in SID table 000001000008/ correct value 000000000001000008/ SID in SID table 41044
Value in SID table 000001000009/ correct value 000000000001000009/ SID in SID table 41045
Value in SID table 000001000010/ correct value 000000000001000010/ SID in SID table 41046
and i checked the program RSDMD_CHECKPRG_ALL for the 0MATERIAL
Characteristic 0MATERIAL: 288 values from table /BI0/TMATERIAL do not exist in table /BI0/SMATERIAL.
and gives me a message Some versions are incorrect.
if anyone have an idea , please suggest me.
Regards
Chintaps

Matnr values are not updating 0FI_GL_14

Hi
0fi_gl_14 is alligned with BKPF and some other tables?
so we added matnr. as per sap if we add field from align tables no need write code? but i am not getting any values?
can u please let me know

Hi,
Did you added matnr field name same as origin table? Field tech name should be same as origin table to automatically fill.
Thanks
Raghu

Characteristic Values are not updated in COPA Report

Dear Gurus
I have created one characteristics and derive the value out of derivation rule but the same is not appearing in the COPA Report even though I mapped that Characteristics in my COPA Report. Please advice and help.
Sivakumar Subramanian

Dear Jayaram
While creating the Derivation Rules I checked the derivation is working fine or not by giving the inputs and it is working and no error in deriving the characteristcis.
Please help.
Sivakumar Subramanian

Qty and value in PO list are not updated (after a Service Entry)

Hi Experts,
Qty and value still to be delivered in the ME2L are not updated:
I have performed a service entry (ML81N) but qty and value are not updated in the list of the PO in the ME2L.
Could anyone explain?
Many thanks in advance.
Regards,
Cesar

Thanks for quick reply.
I do not configure anything in SPRO (Define release strategy for SES) but I got a red light in the top of the screen near the field "No acceptance" so I presume that the SES should be accepted but as I do not configure anything regarding release startegy, I do not know how to accept the SES.
Besides, I cannot perform MIRO: when I put the PO number, system indicates that there is no (suitable) item found for PO
I should have miss something. Could you please guide me?
Thanks,
Cesar

Acquisition value not updated in Asset Accounting... however updated in GL

Hi Friends,
Please provide me a solution for the following problem.
In asset 220000144 of Co.Code B403 , acquisition value is not updated with asset transaction for Rs.279352.00 , and as a result it shows difference in AA/FI reconciliation .
Could anyone suggest a solution to resolve this mismatch?
Urgent !!
Rgds,
Prasad

Hi Ashok,
This is not from the legacy system. This has originated via MIGO transaction.
Rgds,
Prasad

GR's are not updating "Actual" Value under the limit tab in PO

Hi Friends
Can anyone tell me the possible solution for GR's value are not updating in the "Actual" Value under the limit tab in the service PO.
Thanks in Advance

Hi,
I hope this is a service PO with item category D and the GR you mean is the service entry sheet.
Do you have an entry in the Purchase order history for the PO for this?
Do you have an acceptance for the service entry sheet which is complete?
Best regards,
Sridhar

Values are not updated in Assets if posted via Purchase order

Similar Messages

Maybe you are looking for