Values change in PDF between viewers

Have a pdf with a Value of (2.75) when viewed in browser and that value is (2.76) when document is saved and opened in reader X.

What exactly do you mean by "Value"?

Similar Messages

CMYK values change between FH and Photoshop

Hi,
I'm trying to recreate a logo in FreeHand MX11 from one done
in Photoshop CS2 that's composed of PMS colors. Unfortunately, the
original artist didn't leave notes as to which PMS colors she used,
but when I sample a color in P'shop, I get a PMS color (286 PC
C100/M66/Y0/K2) that's a near match. Trouble is, when I assign that
same color in FreeHand, even though the color has the same CMYK
values, it looks much darker and not the same color at all. When I
copy and paste the image from FH into Photoshop and sample it, its
values change to C100/M86/Y23/K9.
I'm confused, how can both apps have so much variation in
displaying PMS colors? Is there a color management setting I need
to fix?
Thanks for any assistance,
Chris

>> [...] but when I sample a color in P'shop, I get a
PMS color that's a near
>> match. Trouble is, when I assign that same color in
FreeHand, it looks much
>> darker and not the same color at all.
>
> What are your color management settings is FH? Are you
on a PC or a Mac? Are
> you using ColorSync?
The reason is most likely color management in FreeHand. Note
that there is a checkbox 'Color manage spot colors' in
Preferences/Colors. It should be checked, of course. Photoshop and
FreeHand use slightly different RGB color values for Pantone Spot
colors. The difference is very small, though.
Don't rely on screen color but check the colors from Patone
booklet because that's what the printer will do. Unlike cmyk colors
onscreen color management is not that crucial, although it is much
nicer to work if is set just right.
Also note that not single Pantone Spot color can be reprouced
with cmyk colors. Espeicially greens, orages and violets will
change significantly. Pantone Spot to CMYK chart is a very useful
tool, included in the 'Panton Survival Kit'.
Jukka

Double value change event if cursor is set busy (LV2009)

Hello everybody,
I just migrated from LV 8.0 to LV 2009 (on linux) and now got problems with a value change event. I want to send a command if a button is pressed and send another one if the button is released. After sending the command I need to wait for an acknowledge from the receiver and to avoid user interaction in between I lock the cursor with "set busy" VI until the acknowledge is received. To see, when the button is pressed or released, I use a value change event. Inside the event structure the cursor is set busy.
This worked reliable in LV 8.0 but not any more in LV 2009. The button's mechanical action is set to "switch until released" and if I press the button and keep it pressed it is reset to false automatically. The value change event is fired twice instead of only once (see attached vi) and "new value" is one time true and one time false. This doesn't happen if the mechanical action is set to "switch when pressed".
Does anybody have an explanation or a workaround for this behaviour? Am I doing something wrong or is this a bug in LV? For now I'll just keep the cursor unlocked.
Thanks for your help.
Attachments:
setMouseBusy_01.vi ‏11 KB

Hi ckis,
attached you'll find your modified example, it should do the trick now.
Regards,
Bernd
Attachments:
setMouseBusy_01.vi ‏9 KB

A tunneled Excel refnum goes from a valid value to a NULL between iterations of a For Loop?

How would a tunneled Excel refnum go from a valid value to a NULL between iterations of a For Loop?
For
some reason this works find in one VI and when executed and not in
another. Here's screen shots of the highlighted execution with probes
appropriately. The "Open" refnum is passed into "Performance Test -
Write Data To Files.vi". That's where the trouble is. You can see
that it goes into the For Loop. The first iteration is okay, but the
second and subsequent iterations have the refnum NULL. See images
below.
(I don't know how to delete an accidental double post, sorry)
Message Edited by James DiLiberto on 01-22-2008 01:48 PM
Attachments:
Second Iteration1.jpg ‏158 KB
First Iteration1.jpg ‏145 KB
Second Iteration Error Dialog1.jpg ‏20 KB

Is there any chance that the Insert Data Into Excel VI is closing the reference or that it is closed anywhere else (e.g. through a local or by having its owner destroyed)?
I wouldn't expect the numeric value of the reference to change to 0, but since ActiveX is an external resource, I suppose that it's possible that the probe shows the number only if the resource is actually accessible.
Try to take over the world!

How to write rfc when value change in the screen (browser) in webdynpro.

Hi,
I want to know how can i write an RFC when screen value change in webdynpro. I already designed a rfc where all the value can be seen in the webdypro screen. Now when user change the value how can i pick the changed value in R/3 so that i can save it into the respective database. Please send some code for understanding it easily as i am new to this field.
Regards
Deep

Hi Deepak,
Though I dint understand your requirment properly but as it is raised in Web Dynpro forum I considering that you want to send the data filled by the user to your backend using RFC calls. For this purpose you can refer to this two documents available on SDN.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/creating%20a%20web%20dynpro%20application%20accessing%20abap%20functions.pdf">Tutorial 4</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d352a790-0201-0010-5082-b1a608d22b6c">Tutorial 5</a>
Regards
Sid

Change display order between second and third display

I have a MacBook Pro Retina 15" (2012) with 2 external displays (Dell 27 and Samsung 24). I use the Dell as main display. My problem is with FCPX. I want to use my Samsung 24 as Second Display to see my video material in it with the option "Show events in second display", but OSX set the macbook display as second and the samsung as third. So, I only can see the events in the macbook and the timeline in the Dell. (Unless I close the Macbook. losing one display. I'd rather keep the 3 to use one of them (macbook) with a Finder window).
Anyone can help me with this or is impossible to change teh order between the macbook display and the Samsung 24?
OS X Yosemite 10.10.3 / FCP X 10.1.4

Another way to put this: in my original instructions, do step 1 after steps 2 and 3:
(Start with FCP in single window mode, in whichever display, it does not matter)
2) 1) Open System Preferences->Displays, click on "Arrangement"
3) 2) Drag the visual representation of the Menu Bar to the display that you want to use as "second" display in FCP X.
1) Move FCP X's single window to the display you want to use as your main display.
4) In FCP X, choose to put the viewers events on second display.

KF creation - Non-cumulative value with NCUM value change - option

What is the use above option in the KF creation?
Thanks

Hi,
A non-cumulative is a non-aggregating key figure on the level of one or more objects, which is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
If you use non-cumulative key figures, an absolute non-cumulative value (the marker) and all non-cumulative value changes are saved in the fact table of the InfoCube. In this way, the retention and volume of data in the data loading process is optimized. A data record is then only loaded to the InfoCube if a non-cumulative changes because of a transaction. Non-cumulatives can then be evaluated at any time in queries, using non-cumulative key figures.
Pls chk this links;
http://sap.seo-gym.com/inventory.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Reagrds
CSM Reddy

Non-cummulative KF wih NCum value change

hi,
Could anyone tell me the difference between the types of non-cummulative keyfigures
Non-cummulative value wih ncum value change &
Non-cummulative value with in and out flow
Kindly give me an example for the first one, I am pretty ok with the inflow n outflow type.
Regards,
sujai

Hi
A noncumulative value is a non-aggregating key figure, on the level of one or more objects, that is always displayed in relation to time. Examples of noncumulative values include head count, account balance, and material inventory. These are noncumulative in respect to time..
For example, you cannot add inventory for this month and inventory for next month to get total inventory.
There are two ways to manage these kinds of key figures. One option is to load the balance every night. The other, a more complicated and powerful solution, connects normal key figures to track the delta changes in the balance key figure. In the inventory example, this might be a key figure called Inventory Movements or two separate key figures called Inventory Adds and Inventory Subtracts. These key figures would be added to the initial balance key figure at query runtime to determine the balance in any
specific time period.............
Now .........Total sale of the Month will be a Cumulative Keyfigure.....
Non-cummulative value wih ncum value change
The key figure is a non-cumulative value. An additional key figure belongs to this key figure, which displays the non-cumulative value change.
Only those values for selected times (markered curves) are saved for the non-cumulative value. The values for the other times are calculated on the basis of a markered curve and the non-cumulative value changes in between.
Non-cummulative value with in and out flow
The key figure is a non-cumulative value. Two additional key figures belong to this key figure, which display the in- and outflow of the non-cumulative value.
Only those values for selected times (markered curves) are saved for the non-cumulative value. The values of the remaining times are calculated on the basis of the value in a markered curve, and the non-cumulative value inflows and outflows inbetween.
Santosh

Detect JSlider value changes?

I am trying to detect updates to the value of a JSlider component so that I can update other GUI components. I added a ChangeListener, but noticed during a debug that the stateChanged method was getting called more often than I anticipated. This was getting called everytime a call to setMinimum() or setMaximum() was made. I would like for this method to be called only when the current value is changed, such as in result of the user moving the knob, a call to setValue is made, or a call to setMinimum() or setMaximum() results in a new value being set. Short of adding a variables to my listeners to detect real value change events, which is not too appealing, I am not sure how this can be done. I noticed in the docs after reading the "How to Use Sliders" tutorial that you can use the ChangeEvent object to get the source slider and call getValueIsAdjusting(), but the method is actually not what it's name indicates:
<<<<<<<<< java documentation
public boolean getValueIsAdjusting()
True if the slider knob is being dragged.
<<<<<<<<<
So this only returns true if this was a user generated event. The method should really be called getKnobIsDragged() or something. Programmatic value changes such as calls to setValue() yield a return of false for this method.
Anyways, it would seem like getting notified only of value changes, either by the user or programmatically, would be a very common need by many applications. What is the recommended way to do this?

Basically, the user needs to be able to select 2 different values. Each of these 2 values is represented by a JSlider control. However, the second value is restricted to be greater than or equal to the first value. So when the value of the first slider, the minimum value of the second slider must be changed to this new value. Similarly, value changes in the second slider must result in the maximum value of the first slider being adjusted.
Normally, changing the min/max DOES NOT change the value if the value is within the range of the new min/max. In this case, I would not want to process the event because the current value stayed the same. However, if the new minimum is greater than the current value or the new maximum is less than the current value, the current value must be updated to reflect the new restrictions. In this case I WOULD want to process this event. So it is not simply a matter of not processing events that stemmed from calls to change the min/max.
I guess there are 2 possibilities to get the behavior I require. First, I can make sure that the code does not break for some reason if a state change occurs that does not result in a new current value. This will result in more processing than is needed, and I will need to use flags to be sure that I do not create an endless cycle of state changes between the two sliders. Or secondly, I can store the last known current value in the listener and simply not process events if the current value is equal to this last known value.
I think the second solution is better since it results in better performance. I still think that this functionality should be provided automatically in the Swing library in some way. Most applications are interested in value changes and not min/max changes.

Value change option for cropping grid lines, PLEASE

The light grey grid lines that appear during the cropping of photos are perfect on a dark photo, but they are REALLY difficult to see on a very light photo.
I'm not asking to change colors; just one value change option would suffice.

For Version 3.0 they could probably auto detect the over brightness and switch between a light and a dark. But I wouldn't hold my breath for anytime soon. A toggle for dark or light overlay would do!
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Getting a value of another textbox in value change listener

Hi
I am associating a value change listener with textbox1. and i need the values of textbox2 inside the listener. So every time, value of textbox1 changes , i want to call a listener which executes a query depending on the value of textbox2 which is constant. But i am not able to get the value of textbox2 inside the listener method.
Thanks in advance..

Read on about the JSF lifecycle. The valuechangelistener will be fired at the end of the 3rd phase of the JSF lifecycle (process validations) and the input values will be set in the bean in the 4th phase of the JSF lifecycle (update model values).
In your case, a complete rewrite of the code may be more useful. If you are actually not interested in the difference between the old value and the new value, then remove the valuechangelistener and put the code logic in the action method of the bean. This will be executed in the 5th phase of the JSF lifecycle (invoke application), after the input values are been set.
Or, in my opinion better, introduce some AJAX framework and make use of its capabilities. For example Ajax4jsf. It saves you from synchronous form submits on every entered character which may lead to poor user experience.
This practical article might be helpful in understanding the JSF lifecycle: [http://balusc.blogspot.com/2006/09/debug-jsf-lifecycle.html]

Differentiating HTTP Request through a URL and a value change listener

Version Details:
Oracle JDeveloper 11g Release 1 11.1.1.4.0
Studio Edition Version 11.1.1.4.0
Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923
IDE Version: 11.1.1.4.37.59.23
Product ID: oracle.jdeveloper
Product Version: 11.1.1.4.37.59.23
ADF Business Components 11.1.1.59.23
Java(TM) Platform 1.6.0_21
Oracle IDE 11.1.1.4.37.59.23
Versioning Support 11.1.1.4.37.59.23
Base Details:
The Product, that a different team is working on (which I cannot access, code, touch,...), creates reports and essentially generates a URL with a bunch of parameters:
http://<host>:<port>/myApplication/main.jspx?parameter1=value1&parameter2=value2...When the user clicks on an "Edit" button, a modal popup window is displayed (using jQuery) with an embedded iFrame with its source pointing to the above URL.
The "myApplication" is an ADF application which brings up an ADF form based on the parameters. Once the user enters the data, validations occur and the data is written into a total of 3 different Tables in the Database. Once the operation is finished, the user closes the popup by clicking on the "X" button of the popup window, which essentially does "popup.*hide()*".
Limitations:
<li>Since there are varied combination of parameter values and associated ADF forms, taskflows is not* an option.
<li>Since the logic of generating the ADF form is not straightforward, ADF BC is not* an option.
<li>Since validations are based on the value change listeners, the managed bean has to be a session scope_ bean.
Problem:
When, for the first time, the user clicks on the Edit button with a particular set of parameter values, the corresponding ADF form is displayed and things work normal. Since the managed bean is under session scope, the form generated for the first popup window stays the same for any subsequent popup windows, even when the URL and its parameters are completely different. As I can not listen to the popup close event, I cannot invalidate my session either.
I tried using filters in the web.xml to grab the request and apply the business logic. Due to the presence of multiple value change listeners (too many <tt>autosubmit=true</tt>), every value change listener triggers a request and so the business logic gets applied with every value change.
After some tests, I deduced that the difference between the call from iFrame and the call from value change is the HTTP Request Method - GET for iFrame and POST for value change listener. So in my filter I apply the business logic when there is a GET request and not apply when its a POST request.
Turns out, that is not a valid enough differentiation between the two requests being made. Sometimes, even the value change listeners are issuing a GET request.
Question:
*1*. Is there a way to force the value change listeners to always trigger a POST request?
*2*. Is there a way to differentiate the requests originating from the other team's Product and those generated by my own value change listeners?
*3*. Is there a different approach, incorporating the above-mentioned limitations, to clear out the session scope each time when a request is made through iFrame? That is, whenever a request is made through the other team's Product?
Edited by: user737922 on Apr 13, 2011 10:58 AM

_(Temporary) Solution_:
Summary:
I am using the request parameter <tt>_adf.ctrl-state</tt> to differentiate between the HTTP requests that my application receives.
Details:
When I receive the request from the other team's Product, I receive a <tt>GET</tt> and a <tt>adf.ctrl-state</tt> value which I store into a local variable in my session-scoped managed bean. The <tt>adf.ctrl-state</tt> value stays the same for all requests (<tt>GET</tt> or <tt>POST</tt>) made from within my own application. It changes only when there is a new request from the other team's Product.
Also, as my application is accessed through an iFrame, there is no possibility of the generated URL being modified by the end-user.
For now it seems that the solution is appropriate but I am not fully confident if relying on the <tt>_adf.ctrl-state</tt> value is the best approach.

Require field be filled out when other field values change

I tried to search on something I need to do but couldn't come up with a combination of words to find much.
I have a situation where, when certain field values on a form are changed, I need a comment field filled in. So if one of the designated field values change and the comment field is NOT filled in, I would like some kind of message indicating that the comment field must be filled in when that field is changed. This would preferably happen when the 'Update' button is pushed on the form. And this would need to happen before the data is submitted.
This seems to be somewhere between a validation and a Dynamic Action. I'm not sure how to go about creating what I need. Any help would be greatly appreciated! Hopefully I have described the scenario well enough.
Thanks!
John

This did the trick! I created the hidden item, then created a dynamic action that would set the value of the hidden item to 1 if the field changed (action = 'change'). Then I created a validation on my 'comments' field to check if it was NOT NULL when the 'Apply Changes' button was pushed, with a condition of the hidden item = 1.
One thing extra - I had to set the dynamic action so that it did NOT fire on page load. Otherwise it would set the hidden item to 1 when the page loaded after clicking the "Apply Changes' button.
So, thanks!
One other question - I have a lot fields on this form. All of them have this requirement except for a few buttons. Is there any way to list the fields NOT to look for a change. In other words, in the Dynamic Action section, in the WHEN section, is there a way to designate items NOT to look for a change?
Thanks for the help!
John

How do I change the spacing between lines in Pages 5.5.2? Single spacing prints more like double spacing.

How do I change the spacing between lines in Pages 5.5.2? Single spacing prints more like double spacing.

In the Format panel under the Text Style tab, there is a ▸ Spacing category. Click it to open, and you will have a selector that defaults to Lines, and to the right, the ability to set your spacing in decimal values. In addition to Lines, you also have At Least, Exactly, and Between capability. You can even set exact line height in points. Check that your Before Paragraph, and After Paragraph settings are correct for your needs.

Folder level script? How can I use field value as a pdf filename in save as dialog box

I read somewhere that if you use a folder level script, you can do things like save a pdf with a specific filename - possibly based on a field name.
How would one set up a folder level script?
How do you execute a script from the PDF?
What code would you use to change the PDF name to the contents of the fFieldName text field?
Or, is this really just impossible to do?

The article is interesting. It suggests you place code like this:
// Page Replacement Function
var ReplaceLastPage = app.trustedFunction( function(cPath) {
app.beginPriv();
this.replacePages(this.numPages-1, cPath); app.endPriv();
In the trusted folder. What is the path of the trusted function(s) that get automatically loaded into Acrobat?
I assume in the example above, function(cPath) is a function inside of the PDF...

Values change in PDF between viewers

Similar Messages

Maybe you are looking for