Values for net.core.rmem_max and rmem_default

A quick question
On Metalink (notes 419646.1 and 421308.1 to be precise)
the values for installing Oracle 10g on RHEL5/64bit build for net.core.rmem_max and rmem_default is 262144
For RHEL5/x86 the same suggested value is 1048576
Does anyone know why this is so, or is it just an oversight in the docs.
regards

Hi user;
On Metalink (notes 419646.1 and 421308.1 to be precise)
the values for installing Oracle 10g on RHEL5/64bit build for net.core.rmem_max and rmem_default is 262144
For RHEL5/x86 the same suggested value is 1048576
Does anyone know why this is so, or is it just an oversight in the docs.RHEL5/64bit and RHEL5/x86 is 32 bit, soo all arch. are different. Its mean oracle need to run different settings on each version or architect
Hope it helps
Regard
Helios

Similar Messages

PO Line Item wise gross value for combination of WBS and Material Group

Hello,
Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
Regards,
Milind Dumbre

Dear Milind
No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
Warm regards
Ramakrishna

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Creation of a Query to show the values for the current month and the last 12 months data.

Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
Hema

Hema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.

I'm trying to increate the ulimits for max user processes and open files for the oracle user. I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
login as: oracle
[email protected]'s password:
Last login: Fri Mar 6 09:56:02 2015 from mtkadmin12
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
[oracle@servername ~]$

Thanks for the update.
I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file. The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
[root@mtkdevorap11d-1 ~]# su - oracle
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 94371840
max memory size         (kbytes, -m) unlimited
open files                      (-n) 65536
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$
[oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 4096
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$

Compare previous row values for the same id and decide

Hello ,
I have this sample data
create table #student_academic
pk_id int identity(1,1) primary key ,
student_id int ,
[year] int,
[aggr_marks] float
insert into #student_academic
student_id ,
[year] ,
[aggr_marks]
values
(112,2012,55.4),(113,2012,65.4),(114,2012,82.32),
(112,2013,75.4),(113,2013,91.22),(114,2013,45.45),
(112,2014,61.2),(113,2014,95.2),(114,2014,75.6)
select * from #student_academic
from the above data i have to generate an extra status column. this status column should be decided by comparing the previous row value. the exact output should be like below.
student_id year aggr_marks Staus----------------------------------------------------------
112 2012 55.4 None
112 2013 75.4 Promoted
112 2014 61.2 Demoted
113 2012 95.2 None
113 2013 75.6 Demoted
113 2014 91.22 Promoted
113 2012 45.45 None
113 2013 65.4 Promoted
113 2014 82.32 Promoted
is there any way to write the t-sql with out using cursors ? this table has around 25GB of data. Any idea would be appreciated.
Thanks in advance.

Hello,
The difficulty of your example is
that there are several rows for
the same year and the same student.
I present a solution
if there is
one line per year per
student:
TRUNCATE TABLE #student_academicinsert into #student_academic
student_id ,
[year] ,
[aggr_marks]
values
(112,2012,55.4),(113,2012,65.4),(114,2012,82.32),
(112,2013,75.4),(113,2013,91.22),(114,2013,45.45),
(112,2014,61.2),(113,2014,95.2),(114,2014,75.6)
Go
WITH CTE AS
(SELECT pk_id, student_id, year, aggr_marks,
(SELECT TOP 1 aggr_marks FROM #student_academic AS b
WHERE a.student_id = b.student_id AND a.year -1 = b.year
ORDER BY student_id) AS prev_aggr_marks
FROM #student_academic AS a
SELECT
pk_id, student_id, year, aggr_marks,
CASE
WHEN prev_aggr_marks IS NULL THEN 'None'
WHEN aggr_marks < prev_aggr_marks THEN 'Demoted'
WHEN aggr_marks >= prev_aggr_marks THEN 'Promoted'
END AS Status
FROM CTE
ORDER BY student_id, year
Regards,
Charlie
Charlie Dancoisne - Independent Consultant & Trainer (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Values for S1A7 CORBA ORBClass and ORBSingelton?

For the sake of argument, what would be the values for;
-Dorg.omg.CORBA.ORBClass=
and
-Dorg.omg.CORBA.ORBSingletonClass=
if I were to use the builtin CORBA classes in S1A7?

Eric Kaplan wrote:
We do a lot of work with customers who haveWebLogic installations.
A new customer has IBM WebSphere and in runningperformance tests
we found a slowdown in serialization over RMI-IIOPin WebSphere as
compared to WebLogic. Our test case is a SSB thatreturns 500K new
Doubles. In WebLogic (and JBOSS) the doubles arereturned to the
client in about 2 seconds (on the same machine). InWebSphere, it
takes about 3 times as long. We brought this upwith IBM and their
current suspicion is that JBOSS (and WebLogic) isusing optimizations
which compromise compliance with the CORBA spec oruse of different
protocols.
Can someone please respond? I've posted theresponse from IBM below...
Hi Eric!
Our RMI-IIOP implementation is way faster than Sun's.
Given the amount
of time we have spent optimizing the 9.x protocol
stack it is entirely
unsurprising that we are much faster than WebSphere.
We don't take any shortcuts and we are entirely
compliant with the RMI-
IIOP spec. We do make the most use of optimizations
that are allowed.
I personally suspect IBM marketing FUD here, because
their competitive
engineering department most certainly has been
comparing/benchmarking
our products to theirs, and IBM would certainly
trumpet any non-compliance
they would have found, especially if it put the lie
to our crushing them
in performance.
Joe WeinsteinThanks Joe. In a subsequent conversation they acknowledged that the issue is pre-processing that might be done before the object even gets to the ORB. We modified our test case to first serialize the Collection to a byte[] and then return this and the timings came way down on WebSphere to be close to those obtained on WebLogic.

How to get Help Values (F4 Values) for HR Infotype 22 and Infotype 337?

Hi,
Currently I am retrieving help values (F4 values) for different HR Infotypes using BAPI_HELPVALUES_GET bapi.
I am able to provide parameters for HR infotype 0002(Personal Data), 0006(Address).
The problem I am facing is, I don't know what to provide in OBJECT TYPE or in OBJECTNAME for HR infotype 22 (Education) and Infotype 337(Professional classification).
I know, in which database help values are stored, but don't know what to provide in OBJECTTYPE, OBJECTNAME, METHOD and PARAMETER.
Thanks for your help.
Thanks,
Ketan

Does anyone have answer of this question?

Missing values for BWAPPLNM (Application comp) and BWVORG field in psa

We loaded records in to PSA of 2LIS_02_ITM and 2LIS_02_SCL. However, upon passing through the update rules into 0PUR_C01 and 0PUR_C04, we find that the added records to both these infocubes is 0.
Upon closer examination of the update rules, we came across routines which relied on values in PROCESSKEY (BWVORG) and BWAPPLNM fields. These fields donu2019t have values in the PSA.
Kindly mention if any additional settings or configurations have to be done at ECC and(or) BI side other than BF11 settings so that these values get populated in to the BWVORG and BWAPPLNM fields of 2LIS_02_ITM and 2LIS_02_SCL so that those records can be added to the cubes upon passing through the update rules.
With thanks
sam

Hi,
see in transaction SBIW. There is missing the customzing for industrial sector. Set it to "standard (core)".
=> this you need for purchasing and material inventory.
Sven

Specific default values for select-options high and low

Hi
My requirement is in the selection screen i have a select-options field for which i need to give default values as mentioned below.
Description Data Type Default Value Mandatory? Sel Scrn Type
Delivery/BOL Date ekab-bedat 1st DOM to current day Y Range
The datatype is ekab-bedat.
In the low value field ,it should be 1st Date of month(DOM) and in the high value field it should be current day.
Give me the code for the same asap.

>
sreedeep.sreekumar wrote:
> Dont mistake my intensions. When i tried to write it in the form of a request it showed me that it cannot me posted beacuse the words that i am using (please,kindly) is not following the terms and conditions of the words to be written in the threads
Sounds quite vague to me.
>
sreedeep.sreekumar wrote:
> I was asking help for this as i am a novice in SAP-ABAP and i couldnt find solutions for it and also i have seen people directly writing codes for the queries.
Becuase you see people posting pieces of code doesn't mean you can ask for a solution asap. Besides, whether you're new or a veteran in ABAP, what you need can be solved with some very basic knowlegde of ABAP. Just use a bit of common sense.

Question on list of value for both of deski and webi

Hi,
I have two questions on list of values issue: (we are using boxir3.1)
1) on the deski, when I click on the Values on the 'Enter or Select Values' prmopt, the list of value it shows is not what it should be, it is pointed to other object, for expense, the value should show department code but the list of values shows the company name. I did refresh, and also refreshed on the universe side: restored default, automatic refresh before use. then export the universe, still doing the same. the only way to correct it I found so far is to change the prompt text which I don't prefer (we used userresponse in the report, it will be too much to change.
2) for the webi report, when I click on the 'Refresh Values' on the prompts page, it shows (No value). I also checked on the universe side, did restored default, automatic refresh before use. then export the universe, still doing the same.
Please help,
Thanks,
jt

Try a new universe on the same connection, build the same objects. Just something simple to test the LOV results. If it doesn't work, it could be a data issue, or a permissions issue as suggested.
You should check the SQL created for the LOV in the universe and verify that it's going to the right place.
You can check to see if there is another LOV using the same name and if so, change it. The LOV name is found on the properties tab. You can find the LOV in the universe folder as a sub-folder from your environment. In my case, I have a folder named @Dev and a folder for universes inside that, then a folder beyond that with the universe name that contains the LOV files. Find the one in question and delete it, ensuring that it gets recreated.
Try making sure that any unv and lov files on your server are purged. You may also need to test cache testings. The easy way to test if it's a cache issue is to reboot your system, which should clear the cache.

Default value for Sold to Party and Reported By with Support Message

I have customized the service desk scenario and went through the entire service desk implementation guide part I blog that talks about the partner setup.
When I create a support message through the service desk scenario (under help) in the satellite system it does default the sold-to-party and the reported by person in the resulting document.
When I create a support message in Solution Manager out of DSWP or SOLAR02 it does as well.
However when I create the support message out of Solution Manager under help it does NOT default the sold to party and reported by, and I always have to correct that in the document later on.
Has anyone experienced this before and can tell me why this happened. Obviously has something to do with setting up the partner in Solution Manager, but I do not understand how it can work for the Satellite system but not in Solution Manager itself.
Thanks
Paul

> Has anyone experienced this before and can tell me why this happened. Obviously has something to do with setting up the partner in Solution Manager, but I do not understand how it can work for the Satellite system but not in Solution Manager itself.
Did you generate BP entries for the SolMan system itself?
Markus

I am using sql trace , please tel me where i can get the value for mode of lock and type of resource.

hi,
I am using sql trace , it has cols like mode and type , but they have numbers , is there any place where i can get the metadata of these values
yours sincerley

I have already found, but the problem is, i have to put cases to show lock in fornt of numbers , what i wanted
is if i could get this mapping any where in database like( metadata is kept) , then i have to put only join.
Q2) I have one more question in which col of the event, i can have lock request status , like weather it is
granted or wait.
yours sincerly
Q1. You can create a table from the data in the link that
Ashwin Menon posted, and use simple JOIN in order to replace the numbers with the Mode
Q2. Please check this great blog:
http://aboutsqlserver.com/2011/05/26/locking-in-microsoft-sql-server-part-4-how-to-detect-blocking/
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Values for net.core.rmem_max and rmem_default

Similar Messages

Maybe you are looking for