Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 200

Hi Guru,
I m in the process of upgradation from 4.6C to ECC 6.0.
In Asset Accounting in 4.6C there is a facility of batch input thereby the user can replace the block cost centre by new one. As this facility is not available in ECC 6.0 so I have figured out all asset master in which the block centre are entered. And one by one replace the old cost centre by new one in asset master. When I ran the dep. "AFAB" there were no error. But for few assets the dep. shows positive value and cumulative dep. as zero. When I display the master of these assets and go into asset value of that asset then it give the message
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 2008
Message no. AU390
Diagnosis
Depreciation terms were changed in depreciation area 01 since the last time depreciation was recalculated. The values for Ordinary deprec. that were saved in the database in fiscal year 2008 are therefore different from the newly calculated values by an amount of   102385.74-.
Procedure
Check if the newly calculated values are correct. If they are, then carry out a depreciation recalculation. You should be aware that if you recalculate depreciation, new values could arise for all open fiscal years, and these would then have to be posted to the general ledger by means of a depreciation posting run.
If, on the other hand, you want to keep the values that are saved in the database, you have to set the depreciation terms back to how they were at the time of the last depreciation recalculation.
To see a comparison of the old and new values, you can use the Display dep. calc. function in the asset value display or the Recalculate values function in the Asset Accounting menu."
Guru, New value is absolutely wrong as it reversed all the dep. charged upto previous period.
please tell me what I can do & how i colud check whether any body has changed the dep. term or not.
Thanks
Rajeev

Hi,
start transaction AFAR for the company code as real run. That will recalculate all asset values and should solve the problem.
Alternative would be to go to AS02 and choose "edit -> recalculate values" from the system menu.
Regards,
Markus

Similar Messages

  • Information Message-Values for Ordinary deprec. have changed in dep. area 0

    We had changed the scrap value for few assests and when ever we goto AW01N i.e asset explorer ,it displays the message -
    Values for Ordinary deprec. have changed in dep. area 01 in fiscal year XXXX.
    The user doesnt this message  popping up every time we look at an asset now.

    Hi,
    start transaction AFAR for the company code as real run. That will recalculate all asset values and should solve the problem.
    Alternative would be to go to AS02 and choose "edit -> recalculate values" from the system menu.
    Regards,
    Markus

  • Planned dep in closed fiscal year

    Hi
    We have done a change(reduced the useful life) in the useful life of the asset in the Fiscal year 2009 in the  month of June,which impacted the  previous year depreciation amount.The planned  dep value got increased in december 2008 .In the posted value tab in asset explorer for year 2008 it displays the planned dep in dec 2008 which is not yet posted.We donot need this depreciation to be posted.We need to delete the planned dep.Financial year and Asset year till 2009 are closed.
    Please advice how to get the planned dep line removed from year 2008 which effects the net book value.

    Hi,
    Are you absolutely sure the changes were made when the fiscal year was closed. Maybe you need to also check if the depreciation area(s) affected was/were open at the time (OAAR). It should not be possible: if the fiscal year and all depreciation areas are closed, changing the useful life should not affect these closed years/depr.areas.
    Changes to depreciation conditions (e.g.useful life, dep.key) only affect the planned depreciation in open fiscal years. There is no specific transaction.
    The adjustment for the depreciation of the closed fiscal year will be reflected in an adjustment posting in the next period due for depreciation posting in a catch-up posting (or smoothing if indicated). For the open fiscal years the newly calculated depreciation will be distributed equally over the remaining useful life.
    Therefore it sound to me very peculiar that planned depreciation should have been created in your closed fiscal year due to a change of useful life. Please review your change documents to ensure depreciation areas and fiscal  years were closed at time of change u2013 and have not been reopened either via OAAR or OAAQ.
    To answer your last question regarding if change of useful life will affect deprecation in 2010:  provided that it is the only open fiscal year and is in fact the current fiscal year, then yes, it will affect the planned depreciation in 2010 and in the remaining useful life.
    Kind regards,
    Brigitte

  • Icloud is asking for my pw for backup - both Apple Id and pw and have changed and they are not asking for my new?

    Received an email from Apple concerning my AOL email not being valid
    after March 31 and instructions how to convert to another active email
    address - new apple id and pw updated yesterday.  Now when I go
    on my iphone, icloud asks me for pw to old aol email ID - which I have
    forgotten - but that is not now the current Apple Id for my ITunes account.
    Not sure how to change it on my phone - when I try to sign out of icloud
    so I can go back in and re-enter info, it asks for pw to shut off find my
    iphone and I have forgotten the pw. Thanks for any help!

    Hello there RmCrCo,
    it sounds like you need to reset the password for the account you have signed in on your phone you should be able to get that reset wiht this article:
    iCloud: Change your iCloud password
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Report to find out for list of users for whom we have changed the password

    Dear Friends,
    Is there any way to find out the list of users for whom the passwords have been changed. We have standalone EP server built on 7.0 with Stack 08.
    Best Regards
    Sita Ram

    Hi Sita Ram,
    here is the
    public void doProcessBeforeOutput() throws PageException {
              IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
              IPortalComponentResponse response = (IPortalComponentResponse) this.getResponse();
          Form myForm = this.getForm(); // get the form from DynPage
           IUserFactory userFact = UMFactory.getUserFactory();
           try {
                IUserSearchFilter groupFilt = userFact.getUserSearchFilter();
                groupFilt.setSearchAttribute(
                     "com.sap.security.core.usermanagement",
                     "uniquename",
                     ISearchAttribute.LIKE_OPERATOR,
                     false);
                ISearchResult result = userFact.searchUsers(groupFilt);
                List list = new LinkedList();
    //            Iterator currentMembers = null;
                while (result.hasNext()) {
                     String name = (String) result.next();
                        list.add(name);
              Collections.sort(list);
              Iterator iter = list.iterator();
                     while (iter.hasNext()) {
                        IUser testUser = userFact.getUser(iter.next().toString());
                        IUserAccount acc[] = testUser.getUserAccounts();
                        String dispUser = testUser.getUniqueName();
                        response.write("<br>"+dispUser+"- last changed password on "+acc[0].getLastPasswordChangedDate().toLocaleString());
         } catch (UMException e) {
              response.write("<br>Searching failed - " + e.getLocalizedMessage());
    develop the project in the NWDS and deploy it into the portal.
    Regards,
    Sithi

  • The values for list items of other data blocks are not getting displayed when executed.

    Hi,
        I have a new problem again.
        I am doing a new form in which there are around 8 blocks. All the blocks have their tables in the oracle database.
        Each block has 18 columns with the same column & column names. But the values in those columns are different & the values do not match.
        The problem lies while i execute the form, it populates only the first block data. Other blocks do not display or populate the values.
        I cannot create a master relationship because all the column values are different.
        How do i display or populate the values of all the tables?
       Please help me. Thank You.

    hi
    if your form has truly disassociated tables, then you could simply use a key-exeqry trigger at forms level to travel to each block in turn and perform an execute-query built-in, eventually returning to the starting block.
    ie
    go_block('..');
    execute_query;
    go_block('..');
    execute_query;
    etc
    go_item(......);
    In this case you would use the block where clause to constrain each table to the appropriate set.
    If however, the database has no relationships between the tables but the data content has some corelation, then you could craft a forms relation manually.
    cheers
    Rod

  • I want to create a document for printing and when changing the cropping area data log restart

    PLE

    Tom,
    In addition to what Monika said, the document can be either CMYK or RGB Colr Mode, but not both.
    And you are right in starting with the CMYK because that will ensure (to the degree possible) that the CMYK and RGB versions match in colour (gamut, the CMYK gamut being the more linited and almost entirely included in the RGB gamut); this will prevent more vivid RGB colours which will make the CMYK colours seem duller.

  • How do you findout if the values of varables have changed in a class

    Hey Hey,
    I have a number of classes which contain varables. I need a way of knowing if the values of the varables have changed. so i can do a job. is there a easy way of finding this out maybe by hash or size?
    ive worked out i can get a array of all the fields in the class like this
             Field[] fields = cls.getDeclaredFields();

    Well, usually you do build support for this kind of stuff into the class itself. I usually do it by using Java's PropertyChange stuff:
    import java.beans.PropertyChangeListener;
    import java.beans.PropertyChangeSupport;
    public class ChangeReporter {
      private final PropertyChangeSupport pcs;
      private int field;
      public ChangeReporter() {
        pcs = new PropertyChangeSupport(this);
      public void setField( final int newValue ) {
        if (newValue != field) {
          pcs.firePropertyChange("field", field, field = newValue);
      public void addPropertyChangeListener( final PropertyChangeListener pcl ) {
        if (pcl != null) {
          pcs.addPropertyChangeSupport(pcl);
    }For additional information see the relevant API documentation.

  • Asset values updation in Eco. Dep area 50

    Dear All,
    I have created one asset for Good will as on 01.02.2010 (go live date 01.02.2010) by using AS91,  and i updated APC cost and Acum Depreciation for Dep area 50 - Eco. Depreciation only.
    Right now my client want to add some new values (because of wrong value updated at the time of take over values)
    How can i do the additions for those assets. i have total 4 Dep. areas but this asset have only one dep. area 50 - Eco. Dep. , more over they run the Dep. for last year (FY - 1st Jan. to 31 Dec.) Please suggest me.
    Regards
    Radha

    Dear Murali,
    I have done all those things, and we updated some values for Good Will with Negative sign, but right now we have to add some Negative value in the same asset.
    EX: Asset no. 10001
    take over values 100000
    actual value      250000
    Right now i have to add 150000 in that asset
    Regards
    Radha

  • How to save  particular variable values for all users

    Hi Experts,
    I have variables posting period with user entry default value  and fiscal year(with entry vulaue mandataory)in 30 queries.Now user wants to set this values i.e.posting period to 0 -16 (interval) and fiscal year to 2008.
    whoever opnes the workbook he should  get the the defualt values as posting period 0-16 and fiscal
    2008 in variable selection screen.unless user enters the values it should remain same Please suggest me how to do that.Is this changes should be saved as vaintat in variable selection screen and transported or shall I do this change for all thse quesries or shall I change the variable value to default setting in variable propeties so that changes should be visible to all 30 queries .Please suggest....!!!!
    Regards
    Prasad

    Hi Prasad,
    Just go to that variables in query designer, and give the default values for the variables as 0-16 and for Fiscal year 2008.
    http://help.sap.com/saphelp_sem40bw/helpdata/EN/ae/1e9b3c334d8c15e10000000a114084/content.htm
    Now while generating the query in the variables screen select the personalization, so that these values will be fixed and personalized for the query.
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/30ae3d47afd652e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/3f/30ae3d47afd652e10000000a114084/frameset.htm
    Rgs,
    I.R.K

  • R3load argument values for OS/DB migration from HP-UX/ORA to WINTEL/MSSQL

    Greetings,
    I am looking for a comprehensive list of R3load task and load argument values for both export and import.
    We are using distribution monitor 1.9.1 I'm looking for possible values for the following parameters in distmon properties file.
    r3load.export.taskArgs
    r3load.export.loadArgs
    r3load.import.taskArgs
    r3load.import.loadArgs
    migmonArgs
    I know the typical values, but I am looking for a comprehensive list and I have not been able to find it in any documentation.
    thanks,
    Joe

    > I know the typical values, but I am looking for a comprehensive list and I have not been able to find it in any documentation.
    Yes - because there is no such list and those parameters change because R3load and lib_dbsl is continously developed; I'd check the corresponding notes.
    Currently for Oracle I'd use
    -loadprocedure fast -merge_bck
    and for MSSQL I'd use
    -loadprocedure fast -merge_bck -c 10000
    plus
    BCP_LOB=1 in the environment of the user running the R3load.
    Also I'd set the logging to minimal and add traceflag 610 (http://msdn.microsoft.com/en-us/library/dd425070%28v=sql.100%29.aspx) - plus modifying DDLMSS.TPL to use page compression.
    Markus

  • Imbalances between the dep area values

    Hi
    We have separate areau2019s for local currency- 01 (INR)  and  Group Currency- ( 03 ) for reporting purpose. The Group dep area was set up the dependent area of 01. What ever values are posted in dep are -01 the same values are automatically updated to group
    dep 03.
    But  last month we have posted the depreciation in the company codes. After that we have executed the reports at the both area ( 01 & 03 ). Now these dep area are showing the different values in AM & FI at group currency ( USD ). Even the  local currency values are updated similarly in AM & FI.. There was no problem in local currcy u2013 INR (dep are-01 ), there is a problem in group currency u2013 USD ( dep are- 03 ).
    Why the values are updated differently in AM u2013 FI at group currency- USD only ?.
    We have set up different GL accounts for both dep areau2019s
    Dep areau2013 01 ( local currency u2013 INR )
    Dep area-  03 ( Group currency u2013 USD )
    Thanks
    Ram

    Have a look to the asset value date when you created the posting, I think it takes the exchange rate from that date. For the depreciation it takes the date from the last day of the Month.
    How you have setup Specify the Use of Parallel Currencies??? --  Yes
    SPRO:
    Asset Accounting / Valuation / Currencies / Specify the Use of Parallel Currencies
    Have you assigned 03 to Group currency? - yes

  • Validations: Null value for LOVs

    See http://htmldb.oracle.com/pls/otn/f?p=24317:239
    I have a "Item is not null" validation on that LOV item. The item has "Display null value" set to Yes and a LOV of STATIC2:1,2,3
    If I leave the Null return value for the item to blank, the engine defaults it to %null% and the validation "knows" that this is really the same as a null value and so it kicks in (good).
    But if I change the Null return value to something like %, the validation doesn't complain, it thinks that this is a not-null value.
    Why the inconsistency? Does this mean that we are expected to use the default value of the Null return value i.e. leave it blank and let the engine put in %null%?
    Comments? Thanks

    Vikas - The declarative not null validation types recognize "actual" null or %null% as null values. This equivalence holds in numerous other situtations during page processing. Why does %null% get special treatment? A convention was chosen and that's it. And it works for almost everybody in almost all situations. In other words, it's useful, if not perfect. If you want a different value, you can specify one in the LOV (as you described). Then you can recognize and convert these values to null or %null% in an after-submit computation so that validations and other mechanisms work normally. (Perhaps it would help if the Builder created such a computation for items having LOVs with specified null values.) One use case for using a specified null return value might be where you want to distinguish a POSTed "actual" null value from the selected "null" value for which you have specified a null return value. Then you can tell if the value was selected from the LOV or whether it got a null value from the item's cache or source methods.
    Scott

  • Creating multiple profiles, using unified profile types, to store multiple values for same properties

    Hi All:
    I am trying to create multiple profiles, using unified profile types, to
    store multiple values for same properties. Here my intention of using
    'unified profile types' is to create multiple profiles (to store multiple
    values for a property). All the properties are stored in the same database
    maintained by Personalization server. Also, I am trying to use the same
    'USER' ejb as profile class/home/pk/jndi.
    The scenerio is,
    define unified profile types (Business, Vacation) using Personalization
    admin tools, using com.beasys.commerce.axiom.contact.User,
    com.beasys.commerce.axiom.contact.UserHome,
    com.beasys.commerce.axiom.contact.UserPk,
    com.beasys.commerce.axiom.contact.User for Profile Class, Home, Pk class,
    JNDI name respectively.
    Define Property set 'HotelCommerce' with property
    HotelProp as single, restricted, text (valid values Single, Double)
    Now you can use the attached jsp files to login as a user and try to set the
    property value for HotelProp for each profile. As per my understanding, I
    was expecting that I can set different values for the property 'HotelProp'
    for each profiles. But unexpectedly, all the profiles get the same value.
    Question. is it the correct behavior? if yes, how can I achieve this
    functionality?
    if not, do you see any problem in my scripts?
    your answer asap is appreciated. we need to make decision on using
    Personalization server v/s developing our own Personalization server!!!:)
    thanks,
    -rajesh
    PS: I have tried 'Unified Profile Example' type too, but that did not work.
    [propsettest.jsp]
    [home.jsp]

    I am trying to create multiple profiles, using unified profile types, to
    store multiple values for same properties. Here my intention of using
    'unified profile types' is to create multiple profiles (to store multiple
    values for a property). All the properties are stored in the same database
    maintained by Personalization server. Also, I am trying to use the same
    'USER' ejb as profile class/home/pk/jndi.Hello Rajesh,
    This is not the purpose of the UUP. The UUP is used to allow existing
    database schemas to be aggregated with the existing Weblogic Personalization
    Server database schema to provide a single, customized user profile with which
    to maintain the user properties (
    http://e-docs.bea.com/wlcs/p13n/users.htm#1068901 )
    If you want to have properties that change value based on some "profile" or
    classification of a user, then you should use classifier rules to change the
    user from "OnVacation" to "AtWork" or "AtHome". You can use these classifier
    rules to select content for the user or conditionally execute logic (
    http://e-docs.bea.com/wlcs/p13n/rules.htm )
    Ture Hoefner
    BEA Systems, Inc.
    1655 Walnut Street; suite 200
    Boulder, CO 80302
    www.beasys.com

  • How to get the values for the Authorization Object Fields....

    Hi Everyone,
    I'm pretty new to the SAP Security and have been working on the Basis sides...I created a new role in PFCG and added a few transactions (ME13) and clicked on the Authorizations tab. In there, the authorization tree is in yellow and red. After providing the Org Values, only the yellow lights remain (apart from the green one ofcourse). Now how do we get the values for the different auth obj fields that are in yellow... say for example
    Conditions                                                   COND
    Maintain Condition: Auth. for Use/Appl./Cond.Type/Table      V_KOND_VEA
    Activity                       03                                                                        ACTVT
    Application                                                                                KAPPL
    Condition table                                                                                KOTABNR
    Condition Type                                                                                KSCHL
    Usage of the condition table                                                                 KVEWE
    Here the values for V_KOND_VEA fields e.g. KAPPL, KOTABNR etc are missing.
    My question is how do we get these values in regard to the requirement provided by the client...is it the functional guys who provide these values or else how is a security person supposed to know it...
    All the help in this regard is sincerely appreciated along with the awarding of points...

    Hey thanks Alex and Catastrophe for the quick response...
    I'll be sitting with the functional team and reviewing the roles created.
    Thanks for all the help once more
    Regards,
    Akash.

Maybe you are looking for