Values in PSA not showing

i have enhanced the extractor.
in RSA3 can see the field value in table.
but in PSA that particular column is there but NO values are being filled in?
any ideas?
thanks

Dear,
goto soursystem and select your specific datasoruce and rt click then replicate the data soruce.then refresh at the same time check the RFC connection (sm59)
Regards
V.G.VG

Similar Messages

Metric shows real time value but does not show historical data

I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
When I check metric value history,
For all the columns like Last Known Value,
Collection Time stamp,
Average Value,
High Value,
Low Value
it shows no data.It even does not show anything in Metric Value History graph.
Even the metric test in Metric Extension works fine.
All the client agents are uploading the the data to OEM successfully.
Any help,guide is appreciated.

bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

Value Type 66 not showing up on Report FMAVCR01

Hi Experts,
I experience one problem on report FMAVCR01 [display annual values of control objects] that my consumed Amount is not zero because value type 66 - transfer posting is not included in the output.
My client did a actual finance posting between different commitment items, funds. Is there a reason for not including this value type?
Thanks for your answers
HP

Hello HP,
Besides of question above, you might also have a look at this customizing and read the on-line documentation in the IMG:
Funds Management Government->Budget Control System (BCS)->Availability Control->Settings for Availability Control Ledger->Define Filter Settings for Commitment/Actual Values
Check whether you have excluded any value type at this point, as it will not be considered for AVC..
Good luck
regards,Mar

SCCM 2012 R2 Reports not activate Value button and not showing Visio and Project products

Hello,
I have experiencing some problems with SCCM reports
1) In some of the reports the "Values" button is disabled and because of that I can not select the name of a specific computer, the reports I've noticed that are relating to Specific Computers
2) The other problem is that when reviewing a software inventory report on a specific computer, Visio nor the Project of Microsoft Office does not appear , which itself can be seen from the Resource Browser
I will appreciate it very much to help me to solve these drawbacks presented in the reports of SCCM 2012 R2.
Thanks in advance.
Manuel
Manuel´s Microsoft Forums Threads

open the report in the report builder tool (in the console, right click and edit. From the reports web page you can click the drop down and choose open with report builder) and examine the query that is being used to populate the computername
values list. You should be able to run that query from the report builder utility to see if anything is being returned. For the report you mention, there is no query to bring back computer names. In report builder, in the left hand menu, open the parameters
folder, then right click @variable from the list and open the properties. Go to the available values item in the menu of the properties window and notice that the available values is set to none, not get values from a query. That is why you can't click on
Values in the SSRS report and get a list of computer Names. You could add a query into the report and save the report if you really want a drop down list of all computer names. I would save the report with a different name if I were to take that approach,
it is not a good practice to modify the built in reports.
Regarding the applications you are not seeing, you will have to look at the query contained in the report, and determine if that query is targeting the same view or data that you were looking at using resource explorer. Which category within resource
explorer were you seeing the information you were expecting to see in this report? You can use report builder to see that the report you are looking at is calling a function to return the software titles, and that function looks to be based on the v_gs_softwareproduct
view. If you were looking at software files or add/remove programs within the resource viewer, you won't necessarily see the same information in the report, since the report is reading a different view.
I hope this info will help you to troubleshoot report quirks. SCCM 2012 reporting is a world apart from SCCM 2007 reporting. There are alot more stored procedures and functions used in SCCM 2012, and even a dll file on the reporting point that is required
for some (most) of the reports!

Prompt in webi not showing all the values

I have created a universe based on a BI query.in the BI query there is a variable for the profit center which has been used in the characteristic restrictions.When i create a webi report based on this universe,the prompt for the profit center is showing only 1 value.It is not showing the rest of the values.Pls help.

Hi,
1. Try to check at BI query level whether values are there for profit center column or not.
2. Try to do what susney said. If it doesn't work follow 3.
3. In universe level go to the profit center object on which you created prompt-> click on object properties -> properties -> edit list of lovs -> then a query panel appers to you -> run and check whether all the values appering to that object ot not.
4. If all the values appering then check whether any filters are applied to profit center object in universe level/report level.
Cheers,
Suresh Aluri.

Field data from RSA3 is not showing in PSA

Hi guys
I can see the data field (custom) data populated in RSA3 for one of our data source...but which is not showing up in PSA table . we recently reinited and for some reason that particular field is not bringing the data .For all the records this paritcular field in PSa showing as 00.00.0000 . How come a field value shows in RSA3 and not PSA ???? please advie what should I do
regards

Hi sam thanks...I can see that data in extractor but not in PSA , that means it should not be in tra str /update rules/. the problem must be in extractor ...please help how to get this date in PSA as is...
I have one more issue, when Iam loading the data from PSA to cube the data was half loaded and then the remaining half has yellow status in monitor...when I checked in simulation mode the following message is coming " Enter rate USD / rate type M for 30.03.2007 in the system settings" do you have any idea on how to fix this ?
thanks
Edited by: sam on Jan 25, 2008 9:17 PM

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

SelectOneChoice not showing all values from database

Hi!
I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
Code:
<af:selectOneChoice id="selAction" value="#{row.idCmd}"
unselectedLabel="<Selecione>">
<af:forEach var="alertTypeNode"
items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
<af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
label="#{alertTypeNode.dataProvider.nmCmd}"
id="si1"/>
</af:forEach>
</af:selectOneChoice>

In your page binding check the rangesize setting for the executable you use - set it to -1.

Plz. help,table does not show value for one field

hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
     <%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
     <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
     <TR>
     <TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>

</TR>
     <%
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
     //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
          java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
          s = "select * from Complains";
     java.sql.ResultSet rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                                                       empId = rs.getString("EmpId");                    // out.print(" " + empId);
          compid = rs.getString("ComplainId");
          // out.print(" " + compid);
          calltype = rs.getString("CallType");
          // out.print(" " + calltype);
                    a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
          %>
                    <TR>
                    <TD> <%=compid %> </TD>
                    <TD> <%=calltype %> </TD>
                    <TD <%=a %> </TD>
                                   </TR>
<%
                    }//while loop
     %>
     </TABLE>
     <%
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarifications

Hi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha

Crystal reports 11: Values displayed in crystal report not showing in VB6

Hi!
I updated an existing lower version of crystal report 7 to crystal report 11. Changes are the following:
1. sql query in VB6 to add fields
2. sql query in crystal report to manipulate values and not use formula. crx11 doesn't allow summary/total in formula fields.
3. report orientation
4. additional fields to view
5. font sizes, length, can grow properties, etc.
When I tested it directly in crx 11, all fields/values are displaying correctly. When I integrated it in VB 6 using Crystal ActiveX Report Viewer Library 11.0 and CR Viewer object, the field is blank.
I've tried several checking like field suppressions, conditional suppressions, etc.
By the way, I also have a report using a subrepot with conditional suppressions. Same thing is happening. The subreport data only displays the alloted space but does not show values in VB6.
Thank you in advance for your help.
Edited by: Naga01 on Jun 28, 2011 8:46 AM

Thanks for your response.
Before I read your response, I tried tweaking my reports and was able to resolve the issue.
Steps taken to solve the issue are the following:
a. Value not showing one field of four (4) reports.
Solution: I created new ones and integrate it in VB 6. The values are now showing. Tweaked on the line object properties, got a problem with the extended line but solved it by adjusting the height of the detail section.
b. Value not showing in sub-report.
Solution: My report used a shared variable so I can pass the condition to my sub-report. I used the new reports and just pass a query during runtime. The values in the subreport is still not showing. I added a formula and called the value in it. Values in the subreport is now showing.
I'll try to update the crystal reports version as suggested at a later time.

Filter values not showing on iPad

Hi,
I have a BW query based universe (UNV) that is published to iPad. The WebI report runs fine in BI Launchpad. However, when I open same report on iPad, the prompt values are not show (I see only blank Blank Blank) and report is not executed. BW server is BW 7.3 BO is BO 4, SP2.
How do I fix this issue?
Regards,
Nikhil

Hello Simone,
please can you tell me, if the open document function with refresh parameter is working in BO mobile App V 4.0.3 (Build 1211)?
In the Release notes for this Version it is described how to do this:
Open Document
1. Apart from iDocID, sIDType and sDocName, other document identifier parameters are not supported
in the OpenDoc URL.
2. Apart from sReportName, sRefresh, IsM[name] and IsS[name], other input parameters are
not supported in the OpenDoc URL.
3. Session management parameter (token) is not supported.
4. Output parameters are not supported in the OpenDoc URL.
We tried to use the following link, but the report did't refresh with the correct parameters:
http://svie32sapbo1:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AfFdCbmEEvZIiVXXFLh4iPY&sIDType=CUID&sRefresh=Y&lsMWert=Alarmierung
The Part "Wert=Alarmierung" should be dynamical in future.
Thank you and regards
Wolfgang

Ssrs parameter default value not showing ,when available values is binded to query dataset

I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
Chandra

Hi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

J2I8 Capital goods transfer of credit - SEcess value is not showing

Hi,
I am working on capital procurement scenario.
I have done MIGO and done J1IEX for capturing excise invoice. From this i have posted 50% duty value immediately.
For claiming remaining 50% duty (On hold account) i have used T code J2I8. In this, i have not found any SEcess column. (Only BED and Ecs availed and available is showing by the system).
After pressing "Transfer credit" tab system created Part 2 entries.
What is the problem behind this? (for not showing SEcess value in J2I8).
Pls. suggest suitable solution.
I am working on SAP 5.0 version.
Thanks
Regard
Rifaie.M

Hi Manoj,
Thanks for your response.
This is the first time i am using J2I8 T code for transfer of credit.
The particular SAP note has not been applied so far.
I will apply the same and if any problem existing, will let you know.
Thanks
Regards
Rifaie.M

Parameter values are not showing in in the Organization Parameter form

We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> Parameter

Have you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access.

Inventory Non cumulative values are not showing correct result

Hi Guys,
I have created a report on Inventory cube taking material in rows and 0T0TALSTCK and 0VALSTCKVAL in colums and i created a variable on calender day . What ever the date if we give we will get the quantity and value as on that date.
Here Quantity is showing perfectly and in case of value it is showing wrongly. In this case the interesting thing is if we substract the (Reciet value - Issue ) value then i am getting the correct value.
Some times Even quantity is zero the noncumulative keyfigure (0VALSTCKVAL)is not showing zero it is showing some value but if i do (Reciet value - Issue ) it will show correctly.
Please help on this issue.
Thanks & Regards
K.Srinivas

Hi,
when the quantity is correct, then you have a problem with the values. You have loaded the infocube correcly.
check your keyfigures and the transformation with the BI content.
=> for example: do you have the coding in the BF transformation?
* see OSS note 571669
    LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
      IF <SOURCE_FIELDS>-stockcat EQ 'V' OR
         <SOURCE_FIELDS>-stocktype EQ 'V'.
        DELETE SOURCE_PACKAGE.
      ENDIF.
    ENDLOOP.
=> you have used the datasource 2LIS_03_UM. There are no quantities. Is there your problem.
Sven

Values in PSA not showing

Similar Messages

Maybe you are looking for