Values in variable screen for customer hierarchy

Hello,
We are working with 7.0. In the query's variable screen we have a variable for Customer Hierachy level 3, but when we push F4 in it, all values for Cust Sales appear. How can we filter this?
Thanks in advance.

hai,
how to u create hierarchy in bw7....would u plz send that document....i hear that is not possible in bw7...
thanks.
prakasu.

Similar Messages

Display non changeable Variables / restricted values on variables Screen

Dear SAP-Experts,
is it possible to display non changeable / restricted char values on the variables screen?
regards
Jürgen

Dear Jürgen,
Now I understand what you mean.
I'm afraid this is indeed not possible, unless you create customer exit for i_step=3 to invalidate any change made by user in variable screen for this variable, which is not really a practical way.
Actually the user would be able to see the filter information after query execution. The detailed location depends on whether you use BEx Analyzer or portal.
Regards,
Patricia

Variable Screen for query view is hidden

Hi All,
   I caome across an old query in BW 3.5 which is haiving some mandatory variables. There is a query view for the same query but when i am executing the query view i didn't got any variable screen and its running for some predefined value. How one can hide the variable screen for query view.
   How can i achieve the same for a BI 7 query view. Please guide.
Regards:
Jitendra

Hi Rakesh,
    What you said is right but my concern is that next time when i open the query view variable screen shouldn't appear ie should run with previously stored variable values. I am working with BI 7 query view. Please guide.
Regards:
Jitendra

Variable Offset for Customer Exit??

Hi,
is it possible to have a variable offset for customer exit time variables?
E.g. I have a variable current month but can I also create a one-year offset of that?
In our system that doesn't work (but also the current month variable doesn't work...)
thanks
Sabine

Hi,
As it is mentioned by Mr.Voodi,it definately works.
You only has given the answer for your problem .i.e you need to make sure the Customer exit variable is working proper.So take a look on the code used for it.
With rgds,
Anil Kumar Sharma .P

What's use for Customer Hierarchy

Dear Guru
What's use for Customer Hierarchy? give me a step to config?
regards
Mohammed Renu.I

Hi Mohammed Renu,
CUSTOMER HIERARCHY:
Customer hierarchies are available in Sales and Distribution, so that you can create flexible hierarchies to reflect the structure of customer organizations. If your customer base includes multi-level buying groups, cooperatives, or chains of retail outlets, for example, you can create hierarchies to reflect the structure of these groups. Use customer hierarchies during sales order processing and billing for determining pricing and running statistics.
 A customer hierarchy consists of nodes.
 To create a customer hierarchy:
1. Create master records for each node.
2. Assign the nodes to each other.
3. Assign the customer master records to the relevant nodes.
 Hierarchy nodes are only valid for a certain period of time. They may also be moved. If a node is moved, the system automatically reassigns all related nodes and customer master records.
With customer hierarchies, you can assign price or rebate agreements to a higher level node. The agreements are then valid for customers at all subordinate levels to this node. You can create pricing condition records for each node indicated as relevant for pricing. If one or more nodes in the hierarchy path of a sales order contain pricing information, the system takes them into account automatically during pricing.
'How to check'
All the customizing is in SD/Master Data/Business Partner/Customers/Customers hierarchy
All the customizing is in SD/Master Data/Business Partner/Customers/Customers hierarchy
1) Define hierarchy type: just put and ID and a name to the new hierarchy.
2) Set partner determination: if you want to user the hierarchy in price determination, then, in the orders, at the header level, you have to have a Partner Procedure with a partner function for each level. In the partner procedure, in each partner function you must indicate the source partner function. With this information, in the order, you obtain the business partner for each partner function.
3) Assign account groups: you indicate which accounts groups are allowed for being part or your hierarchy.
4) Assign sales areas: simple you indicate which sales areas are allowed in your hierarchy. (Here you can customize common sales areas, just for not having to build de hierarchy in all the different sales areas).
5) Assigning hierarchy type for pricing: you indicate which classes of documents uses hierarchy in pricing determination.
It is possible to maintain so called customer hierarchies. This might be useful when for example you create a condition discount for a customer that is part of such a hierarchy structure. All subnodes in the hierarchy below that customer, will thus receive the same discount.
Customer hierarchy setup, firstly decide the hierarchy type to be used.
The standard is type A.
You can also assign a partner function to the customer so that the higher level customer in the hierarchy is copied into a sales order as a partner function - but you don't need that right?
Next assign your customer account group to the hierarchy type. And enter the combinations that will be allowed for creating the hierarchy.
You want to assign a ship-to to a payer. So enter the ship to account group and enter the payer account group as the higher level.
You must also make an entry for permitted sales area assignments. So if you want to a hierarchy for customers in the same sales area then enter the sales area and enter the same one as the higher level sales area.
All these settings can be found in the IMG. Under SD - master data - business partners - customers - customer hierarchy
You use for example customer hierarchy when you have an company like Unilever and you agree both on a discount. Unilever does have different locations / businesses and you have to maintain the discount for all customers. If you use a customer hierarchy you can maintain the discount for the partner in the top of the hierarchy and in this way it will be valid for all customers in the hierarchy.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Cannot enter value in selection screen for Hierarchy variable.

Hi All,
I have a hierarchy variable on the selection screen for Org unit.
When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
Can anyone tell why is this happening and is there any way this can be changed?
Thanks in advance.
-RJ

Hi Prakash,
I am not able to select or click on the input field of the selection screen before and after selecting the value
CTRL+K doesnt work for me.
The display field is populated only when i select a node from the F4 help screen.
When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
The variable is Mandatory multiple single value readu for input.
I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
This is the link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
I would like to know if there is a work around or setting that can be made to make it work?
-RJ

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

User Exit or BADI For Customer Hierarchy Maintainence- VDH1N

Hi All,
I need User Exit or BADI for the Customer Hierarchy Maintainence VDH1N Tansaction.
I need to Capture all the Changes done to the Customer Hierarchy by the User in ECC.
Thanxs.
Swathi

Hi,
Follow these steps to find BADI...
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler => get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.

How to pass attribute values through variables in JSP Custom TagLib

Hi,
Can anybody help me how to pass values through varuables in the jsp custom tag.
i am using JSP custom tag. I am unable to pass attribute values through variables.
<invitation:invdetails invid="<%=invid%>"/> The value is passing as <%=invid%> ,not value of the invid.
But i am getting throuh the fllowing
<invitation:invdetails invid='1' />
Please anybody suggest me how to pass value by using the variable.

Hi,
It sounds like you need to set the <rtexprvalue> tag to true in the TLD for your tag. If you do this the tag will read in the value you are trying to pass to it.
dapanther...

Issue with Data Provider name in variable screen for BEx Analyzer

Hello all,
We got an issue with Data Provider name in Variable screen in BEx Analayzer.
We want to change the DataProvider name there to Description of the report instead of its Technical name.
Any inputs are appreciated.
Thanks
Kumar

You have to create a workbook to do this.
Refresh your query/report. In Bex analyser, there is one toolbar named BEx design toolbox, If you are not able to see it in analyser, right click on the toolbar space of BEx analyser and click on BEx design toolbox. Here, goto to design mode, by clicking on a sysbol like 'A'. after that place the curser where you want to see the Query description. and click on insert text (T) in BEx toolbox. click on it and check "Query description" in constant tab. in the general tab you need to assign a dataprovider, for that assign your query name in workbook settings (in Bex design toolbox). also check the "display caption" in general tab.
Pravender

XD01 Custom screen for custom fields,need to update tables kna1,knvv

Hi all,
I have designed a custim screen for XD01 with four custom fields five from kna1 other one from knvv table. i need to update the respective tables with these fields in badi GET_DATA of method IF_EX_CUSTOMER_ADD_DATA how to update the database table. Please help me in the same.

see the help
http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
Regards
Kiran Sure

Variable Screen for 3.5 BEx Queries In EP 6.0 Iviews

Friends,
Does anyone know how to force the variable screen in an EP 6.0 Iview based on a 3.x BW. I have a query written in Web BEx with several optional variables. When I launch this from Web BEx it stops at the variable screen.
The problem is that when I run this query from an Iview in EP 6.0 it bypasses the variable screen and goes directly to the data. In the web application designer I can set the flag to force the variable screen, is there a similar feature in Web BEx or is there a parameter setting in the iView that would work?
Thanks
Kevin

Here's an extract from the log message:
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:539)
     at java.util.ArrayList.get(ArrayList.java:356)
     at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:259)
     at com.sap.pct.hcm.editappraisalformular.r3proxies.Web_Evaluation_AppraisersTypeList.getWeb_Evaluation_AppraisersType(Web_Evaluation_AppraisersTypeList.java:98)
Does it seem like a Customizing error? Am wondering if the iview is trying to access some table that has no entries in it.

F4 on Variable Screen for a DataStore Object Produces Long Run Time

We experiencing a long run time in returning values when we select F4 for the Variable 0COMP_CODE when we process query for a DataStore. Before our upgrade to NW04S, we did not experience this issue. As background, the DataStore (ODS) has not changed, the variable has not changed, and the query has not changed.
0COMP_CODE has the following configuration in RSD1:
Query Def. Filter Value Selection Values in Master Data Table
Query Execution Filter Val. Selectn Only Posted Values for Navigation.
These settings are exactly like this in our BW 3.5 system.
In my review of the differences, I found that in BW 3.5, the runtime is short because the selection that is returned is the Company Codes in the Master Data table, but in NW04S, the selection that is returned is the Company Codes within the ODS.
Has anyone experienced this before and if so what was your resolution?
Thanks!

Query Execution Filter Val. Selection should help you a lot in improving performance for F4.
Three options are available for the Query Execution Filter Val. Selection field on the BEx tab that directly affect F4 searches.
The Only Posted Values for Navigation setting limits an F4 search to the values related to the querys navigation state. It is the recommended setting if youre working with less savvy BW end users who may have trouble identifying applicable values or are confused when faced with long lists of characteristics. This setting yields the slowest performance in terms of the F4 search.
Only Values in InfoProvider is a better option if you need a list of characteristic values for a variable that is limited to the transactional records in the InfoProvider that a query is being executed against. This setting is ideal for restricting users to the appropriate source when data is available in different InfoProviders with different values. For example, lets say you have an InfoCube with billing data for Europe and another for the US. Each sales office will have different values, so by using this setting a variable can be restricted to the correct values.
The Values in Master Data Table setting allows users to list all possible characteristic values when they run F4. Recommend that you use it when you have transactional records for almost all the values across InfoProviders and users are aware of the relevance of the values for the navigation state.
While the Values in Master Data Table setting is the fastest F4 search setting, you need to be aware of a couple of situations when using it. Users with authorization restrictions may have an F4 list returned with all the values from the master data table, but a subsequent query may not report the result. Instead it will generate an error message informing the user of the authorization restriction. Likewise, users may select values from the master data table that are not valid for the current query due to other restrictions. There may not be any records for an InfoObject in its underlying InfoProvider designed for a query, so the system returns a no applicable data found message.
Important Notes for F4 - Performance -
748623 Input help (F4) has a very long runtimerecommendations
661251 Filter value selection displays too few/too many values
581802 Variable dialog boxes: performance of the F4 help
581079 Performance for the F4 help of navigation attributes
626887 F4 variables and InfoObject settings.
Hope it Helps
Chetan
@CP..

Variable Screen for BEx Web ( Changing "Save As" to "Save Variable")

A cosmetic change...on the Variable Entry screen we have a button to save variant defaulted to the text "Save As". As our needs, the text on the button needs to be changed to "Save Variable".
Any possiblities...??
Thanks in advance...
Maci

Hi Maci,
Unfortunatly there is no possibility to change the entries in the standard variable screen. The only thing you could change here is the format (eg. colour) by using the theme editor.
Best regards,
Janine

How to set up web variable screen for filtering by attributes

Hi out there,
My problem deals with the query variable selection screen in the web. I would like to filter some variables by their attributes in the same way it is done in the navigation item, but in the selection screen I have only the characteristic values in the F4 help available. Is there a way to adjust or extend the selection screen so that I can also filter by attributes (without having to modify the corresponding ABAP Class)?
By the way this functionality exists for selection screen in BEx, so why doesn't it exist in the web?
I'd appreciate any idea.
thanx,
Heiko

The most direct way to do this is modifying the principal infoobject and make this attribute as NAVIGATIONAL.....this allows you to see this attribute as a characteristic in Query Designer and you could use it with a filter....
I hope this helps you
Message was edited by: Oscar Diaz

Values in variable screen for customer hierarchy

Similar Messages

Maybe you are looking for