Values missing in APD
Hi Experts
I have created an APD which reads Data from a query.
But few of the key figures are not getting value where as other are getting values. What could be the reason.
Regards
Akshay Chonkar
Hi,
Check if key figures in base query are getting data or not. If the data is coming in base query then check the assignment and display settings.
I hope it will help.
Thanks,
S
Similar Messages
-
Cannot create target element /Invoice. Values missing in queue context.
Hi Experts,
I am working on Idoc to File scenario using SAP PI 7.1. In this scenario I am mapping Invoic02 Idoc with Invoice xsd. I am able to test the mapping in ESR with status as success.
In ID Tools --> Test Configuration I used the same payload and tried testing the configuration step by step. while executing I am getting an error at Operation Mapping saying "Runtime exception occurred during application mapping com/sap/xi/tf/_MM_SRM_Hubwoo_Invoice_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /Invoice. Valuesmissing in queue context. Target XSD requires a v~"
Even though the mapping is getting executed successfully in ESR, I am not able to fix this issue. Need your inputs in resolving the same.
Regards,
Saurabh
Edited by: saurabh mathure on Oct 16, 2010 8:14 AMHi ,
issue"Can not create the target element value missing the queue context'.
reason for this issue:
Target field expecting some value from sender field. so in testing your not getting any data from source field for this reason your getting that issue.
Solution:
In mapping use node function:Mapwith deafault between source and taget fileds.
Then activate mapping . now excute the scenario it will properly without that issue.
Cheers,
Meera -
Some values missing in FAX whereas same drivr program and smartfrm in print
Hi Experts,
I have a driver form and smartform in Print and same in fax configured in nace. But there are some values missing in FAX output whereas in print and email it is correct.
Can anyone help with the reason.
Thanksclosed..
-
Planned Values Missing from report S_PL0_86000029
Planned Values Missing from report S_PL0_86000029, how to rectify this?
Where to plug in the values?it's Plan actual comparison in the Profit and Loss Financial Statement.
This Transaction Code is for Profit Loss Statement whereby the Planned values have to be seen.
But one thing, I have also deleted the planned values from the General Ledger and Profitability Analysis.
Need to get these Planned values. But from Where?
Deleting GL Planned values - GLDE
Deleting COPA values - KEDB
This is what I have used.
Edited by: Bhatia on Oct 9, 2008 8:16 PM -
Cannot create target element/ns1:MT_CONTRACT.Value missing in queue context
Hi Friends,
AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
that is csv file am trying to convert to xml. but am getting error "Cannot create target element /ns1:MT_CONTRACT. Value missing in queue context."
my data types is: MT_CONTRACT_SNDR MT_CONTRACT
SUB_ELEMENT: Recordset Recordset
SUB_ELEMENT: Item Item
SUB_ELEMENTS: AgrmntID AgrmntID
Company_Code Company_Code
Vendor_No Vendor_No
like this all the 18 elements under Item node. I kept Recordset occurance 0-1 and Item 0-Unbound and all 18subelements as 0-1 in both sender and receiver. And in content conversion:
Document Name: MT_CONTRACT_SNDR
Document Offset: 1
Recordset Structure: Item,*
Record Sequence: Asending
Recordsets per Massage: 1
Key Field Type: String (Case-Sensitive)
Item.fieldSeperator : ,
Item.endSeperator: 'nl'
Item.fieldNames: AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
KINDLY SUGGEST ME WHAT MISTAKE AM DOING. AM NEW TO SAP PII have this error in audit log. On searching I read that the error is connectivity problem between abap stack and java stack. but I made restart the server but error not cleared. can anyone of you suggest me to solve?
Audit Log for Message: 7c06ee0d-d70b-406f-07bc-f56228cc1d6a
Time Stamp Type Description
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:05:07 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:05:07 Information The message status was set to WAIT.
10.08.2011 18:05:07 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:10:07 IST 2011.
10.08.2011 18:10:07 Information The message status was set to TBDL.
10.08.2011 18:10:07 Information Retrying to deliver message to the application. Retry: 1
10.08.2011 18:10:07 Information The message was successfully retrieved from the receive queue.
10.08.2011 18:10:07 Information The message status was set to DLNG.
Time Stamp Type Description
10.08.2011 18:10:07 Information Delivering to channel: CC_Contrct_Recivr
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:08 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:10:08 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:10:08 Information The message status was set to WAIT.
10.08.2011 18:10:08 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:15:08 IST 2011. -
UDF required !! Cannot create target element Values missing in queue context
Dear Experts,
I am getting the cannot create target element error with acknowledgement payload in response message mapping in synchronous interface. I have shared the response payload2. Please suggest do I need write any UDF.
Message mapping successful with below payload1:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:updateOppResponse xmlns:ns0="http://soap.sforce.com/schemas/class/clientUpdateInqWebService">
<ns0:result>
<ns0:Description>Record Updated</ns0:Description>
<ns0:SFDCId>006M0000007xjTrIAI</ns0:SFDCId>
<ns0:Status>true</ns0:Status>
</ns0:result>
</ns0:updateOppResponse>
With the below target system response message, Mapping failing with Cannot create target element /ns1:MT_InquiryUpdate_ECC_Ack. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD com.sap.aii.mappingtool.tf7.IllegalInstanceException:
Actual acknowledgement reply from target system payload2:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns="http://soap.sforce.com/schemas/class/clientUpdateInqWebService" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<updateOppResponse>
<result>
<Description>Record Updated</Description>
<SFDCId>006M0000007xjTrIAI</SFDCId>
<Status>true</Status>
</result>
</updateOppResponse>
</soapenv:Body>
</soapenv:Envelope>
Regards
RKNHi
The easiest solution will be , write an simple java map for your response mapping.
Please provide your target structure , if you need any help on the java mapping.
Sample code:
Response message from web service
target msg:
java code:
package com.sap;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class populateResponseMessage extends AbstractTransformation {
public void transform(TransformationInput arg0, TransformationOutput arg1)
throws StreamTransformationException {
try {
DocumentBuilderFactory tfactory = DocumentBuilderFactory
.newInstance();
DocumentBuilder tbuilder = tfactory.newDocumentBuilder();
Document doc = tbuilder.parse(arg0.getInputPayload()
.getInputStream());
Document newdoc = tbuilder.newDocument();
Element root = (Element) newdoc.createElementNS(
"urn:sap-com:document:sap:rfc:functions",
"ns1:ZTEST_FAULT_MESSAGE_DATA.Response");
newdoc.appendChild(root);
NodeList nlList = doc.getElementsByTagName("ConversionRateResult");
if (nlList.getLength() != 0 && nlList != null) {
Node data = nlList.item(0);
String sourceval = data.getTextContent();
Element rate = (Element) newdoc.createElement("RATE");
rate.setTextContent(sourceval);
root.appendChild(rate);
Transformer transformer = TransformerFactory.newInstance()
.newTransformer();
Source source = new DOMSource(newdoc);
Result output = new StreamResult(arg1.getOutputPayload().getOutputStream());
transformer.transform(source, output);
} catch (Exception e) {
e.printStackTrace();
}// end of transform -
Cannot create target element /ns0 Values missing in queue context
Hi Sdn,
When I am testing the Message mapping in PI i am getting the below error message .
Cannot create target element /ns0:TechObjChange. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD See error logs for details
Could you please tel me what would be the wrong.
below is the XML file data .
<?xml version="1.0" encoding="UTF-8"?>
<ns0:TechObjChange xmlns:ns0="http://schemas.xxxxx.com/iiiii/xxxxxx">
<TechObjChangeFLEQ>
<FormType/>
<FunctionalLocation/>
<Descoffunctionalloc/>
<Equipment/>
<DescofEquipment/>
<StartupDateofTechObj/>
<Manufacturer/>
<Manufacturermodelnumber/>
<Manufacturerpartnumber/>
<Manufacturerserialnumbe/>
<Countryofmanufacture/>
<Yearofconstruction/>
<Monthofconstruction/>
<TypeofTechObject/>
<PlannerGroup/>
<MainWorkCenter/>
<CatalogProfile/>
<NameofUserchangingtheobject/>
<Characteristic>
<CharacteristicName/>
<Characteristicvalue/>
</Characteristic>
<MeasuringPoint>
<MeasurementPosition/>
<Characteristic/>
<MeasurementPoint/>
<MeasuringPointAsIs/>
<MeasuringPointAsLeft/>
<PCTCodeGroupMP/>
<PCTCodeMP/>
</MeasuringPoint>
</TechObjChangeFLEQ>
</ns0:TechObjChange>WSDL structure
WSDL structure
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xxxxxxxx">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:p0="http://schemas.xxxxxxxxx" targetNamespace="http://schemas.xxxxxxxxxx">
<xsd:element name="TechObjChange">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TechObjChangeFLEQ">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FormType" type="xsd:string" minOccurs="0" />
<xsd:element name="FunctionalLocation" type="xsd:string" minOccurs="0" />
<xsd:element name="Descoffunctionalloc" type="xsd:string" minOccurs="0" />
<xsd:element name="Equipment" type="xsd:string" minOccurs="0" />
<xsd:element name="DescofEquipment" type="xsd:string" minOccurs="0" />
<xsd:element name="StartupDateofTechObj" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturer" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturermodelnumber" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturerpartnumber" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturerserialnumbe" type="xsd:string" minOccurs="0" />
<xsd:element name="Countryofmanufacture" type="xsd:string" minOccurs="0" />
<xsd:element name="Yearofconstruction" type="xsd:string" minOccurs="0" />
<xsd:element name="Monthofconstruction" type="xsd:string" minOccurs="0" />
<xsd:element name="TypeofTechObject" type="xsd:string" minOccurs="0" />
<xsd:element name="PlannerGroup" type="xsd:string" minOccurs="0" />
<xsd:element name="MainWorkCenter" type="xsd:string" minOccurs="0" />
<xsd:element name="CatalogProfile" type="xsd:string" minOccurs="0" />
<xsd:element name="NameofUserchangingtheobject" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristic" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="CharacteristicName" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristicvalue" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="MeasuringPoint" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="MeasurementPosition" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristic" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasurementPoint" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasuringPointAsIs" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasuringPointAsLeft" type="xsd:string" minOccurs="0" />
<xsd:element name="PCTCodeGroupMP" type="xsd:string" minOccurs="0" />
<xsd:element name="PCTCodeMP" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="TechObjChange">
<wsdl:part xmlns:p4="http://schemas.xxxxxxx" name="TechObjChange" element="p4:TechObjChange" />
</wsdl:message>
</wsdl:definitions> -
Mapping Mapwthdefault at tiem level -Values Missing in Queue context
Here is the logic
If (E1EDP19-IDTNR_EXTR is not empty and (E1EDP19-QULF)=001
map IDT_EXTR to target Buyerpart
else
if E1EDP19-IDTNR is empty and E1EDP19-QULF=002
if E1EDP01-MENEE IS NOT EQAUL TO AU
map const (SEE_DESCRIPTION) to target
All context set to EDP01
Target is mandatroy field
1) data : If the 1st item level has the value IDTNR_EXTR and 2nd item level is not .
In the else condition also QUALF is not matching to 002 so not getting the value for else condition in second item level .
So getting the error ItemDetail[2]/ns0:BuyerPartNumber. Values missing in queue context
How can we add mapwithdefault to not to fail for mandatory field
2 data I added mapwithdefault befoe else it worked for this data but failed for other test with 3 line items IDTNR_EXTR values. 2nd line item was getting in target which is not
Thanks for your helpHere is udf i tried but not working as expected
String output = new String();
for (int i=0; i< qualf.length;i++)
if(qualf[i].equals("001")&&(idntex[i]!=("")))
output = idntex[i];
else
if((qualf[i].equals("002"))&&(idtnr[i]==(""))&&(manee[i]!=("AU")))
output = ("Notes") ;
result.addValue(output);
if item has only one value of idtnext and 2nd line item also it is displaying same value it should be blank
Thanks for your help -
Hi All,
DSO Activiation is sucessfully completed.But unable to execute reports based on this DSO.
In RSRV Test it is giving Error that "SID values missing for 1 specifications of characteristic 0DOC_DATE"
This error occuring for only Date Objects.
Please give some solution.
thanks
Ramesh BabuHi,
SID error comes during activation of ODS because the related MD is not available for assigning SIDs.
Whenever Master Data is loaded SID's are generated for those Master Data records.
Now when you load Transaction Data these SID's will used (for the records which use above master data values). This results in performance gain.
If Transaction Data is loaded first than the system checks for SID's. If they are not available system generate SID's. This results in a loss of performance.
Now in the case if you don't have the setting selected (Further Processing Without Master Data/Always update data, even if no master data exists for the data) system will throw error No Sid?s found and load will terminate.
So as a first step ensure that the related master data is loaded and Attribute change run has been triggered.
OR
Load the MD and Activate the MD (Modeling > InfoObject > Search the Infoobject > Right click > Activate Master Data)
Once you perform this you can retrigger the activation. It should work fine.
Else as a workaround you can blank out these particular values and activate.
There is also one more workaround wherein you can create the Master data entries directly in BW itself. But both the above step should be done after consulting Business and considering data volume that needs to be edited/created.
In most case once you perform the loading and activation of MD your activation should work fine when repeated.
OR
In the infopackage goto Update Tab and make the setting Update the records even if no master data exist and reload
This may work.
rgds,
nkr. -
TDP / SD - error- posting value missing in mat doc
Hi experts,
Please help...
I have two excise duty conditions ya02 and ya03 and they stand for excise duty value calculated via rate from OIH01 table and other is calculated based on the reduction % entered during delivery document respectively. So ya03 is zero initially when teh order is created, until a % reduction is entered in the delivery document and from their a User exist calculates the reduction value and populates the ya03 condition type.
Till here it is fine now when the PGI is done the value for ya02 is visible but ya03 is missing. Debugging shows that the system is looking for the value in OIH01 table. and when ED rate is maintained the value for ya03 is populated in the mat doc.
1. Is their any user exit which can bypass this and pick up the value calculated in the condition type ya03?
2. Any other suggested solution?
regards,
VineetEntire material GR stock should be in storage location,before proceeding to next step.
After cancelling invoice,Cancel material document,Post excise using J1IEX,Cancel excise using J1IEX.
Now do necessary changes in p.o. Do GR,invoice.
Edited by: Jeyakanthan A on Feb 24, 2011 8:50 PM -
How to change varient values dynamically in APD
Hi Friends,
I have created an APD ,to this APD i am feeding 4 query out puts.For this 4 querys i am using the varients, i wante to change the varient values i.e date field/date ranges fields dynamically.pl.let me know if any b'dy worked such scnarios.
Thanks in advance.
Sirisha.sk_java wrote:
Hi,
I need to know how we can change the values of annotation dynamically.Annotations in source code must be compile-time constants. The annotation objects returned by the runtime are immutable.
That said, there are a few ways to get the effect of changing annotation values. First, you can use the redefine classes API and then getting a new annotation object will have the updated values. Also, an annotation type is just a specialized kind of interface and that interface can be implemented by your own classes too. -
Role Expert: Org values Missing
Hi,
I ran the 3 Backgrnd jobs in sequential way: Org Value/Transaction/Activity Sync jobs and jobs were completed with no errors. I checked the log files and i see no major errors as well.
But after completing the jobs, i tried creating a role and assign the org values to the role. But i dont see the org values under each org levels such as Company Code, Sales org etc..
Did I miss any config steps here?
Thanks
SundaramHello All,
Even we faced this issue and was resolved by running the three BG jobs again but in a sequence as follows:
1. Transaction Sync.
2. Object Sync.
3. Activity Sync.
Please try this and lemme know if you still face an issue with the same.
Regards,
Hersh. -
hey friends need some help
i am using the same pricing procedure for my sales order document and for Contracts.
when i insert the condition type for price, the net value gets calculated for Sales order and the same doesn't happen when i am creating contract, the condition type gets accepted but the net value shows zero in the document and when i try to save i get the message "missing data; net value"
what might be the issue,, plz helpyes ..ofcourse.
Based on your business requirement go for Periodic or Milestone billing plan. Normal sales order doesnot require it but for contract it is must.
For configuration check:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/milestone+billing.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/periodicBillingConfiguration
Edited by: Yadav on Sep 8, 2009 11:44 AM -
Depreciation Planned Values missing in AW01N
Hi ,
we have a scenario in which few assets is not showing any depreciation values for period 9 (i.e. post/planned), instead the depreciation value period 9 is transferred to the period 10.
Example: if depreciation value is 100 EUR for all the periods (1-12) and the depreciation run is successfully completed till period 8 for an asset. when we analyse the period 9 planned values in Asset Explorer screen, the entire row is missing and the period 10 is showing with a planned value of 200 EUR (inlcusive of period 9).
Any solution to rectify this scenario ?
Regards
GovindarajanHi
In AFAB
1. PLANNED posting run
2. REPEAT
3.RESTART
4. UNPLANNED posting run
While claculating dep which dep key you select from the above fileds. check it properly
Thanks
Anil -
CEWB: BOM item Mass change new value Missing
Hi Guru's
When i plan to do BOM item lead time offset mass change in the (CEWB) Engineering Workbench,
i have selected the ITem and Column LT offset, and in entra when i select the mass change, system showing a error.
" no item selected", (new value and replace indicator is missing
.Can u help whether we need to apply any notes ?
Regards
GS
Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:40 AM
Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:51 AMUpload screenshots of the step which you're taking in CEWB & the error you notice to some portal & paste the link here for a clear understanding.
Also which version of SAP you're working on & what is the support pack level ? (If you're not sure about it, then check with your system admin for the same).
Maybe you are looking for
-
PDF (again) and photo books
I am sorry to bring up this thing again, but even reading similar entries I still don't know how to do what I want to do or whether it is possible at all without some third party software. What do I want? That people can turn the pages of my PDF, see
-
Member Selector In Crystal Reports For Enterprise
Hi All I am working with hierarchies within Crystal reports for Enterprise. I am using a standard Bex query with the report, so the crystal report is not using an OLAP cube direct. I am wanting to select all the dependants of a particular member wi
-
I have a 32" Vizio LCD HDTV and have only used HDMI for my connections to my Uverse box and PS3. I got back an old stereo and set of speakers and wanted to use this to set up a 'poor mans surround sound' system. I tried with the PS3, but I believe wi
-
SCEP and mapped drives.
Hello, Is there a way to have SCEP scan a mapped drive when doing a custom scan? Thanks! Shawn
-
Is Microsoft going to offer a Software update with added functionality for Kin Twom?
Considering how blatant the omissions of a way to back up contacts, sync a calendar, or write/store notes are on the Kin Twom, does anyone know if Microsoft plans to update the software on the phone?