Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Similar Messages

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

Object form is not getting displayed for few users

Guys
I have successfully implemented approval and provisining flows for a new resource in OIM 9.1.X. This resource has an object and a process form.
It is working fine in production for few users. But for few users, the object form is not getting displayed to give the input while requesting this resource.
Please let me know what might be the issue.

Hi,
Could you please check whether you have added ALL_USERS group as a resource administrator group in resource object definition?
Add AL_USERS group as a resource administrators with the read access.
We had similar issue and managed to resolved.
Thanks,
Pallavi Chaudhari

Hierarchy value not getting displayed in WAD.

Dear all,
We have a Hier Variable for Business Area, it is there in the Filter area of the query.
when we execute the report in WAD through Portal , we are getting the Values restricted with Hier variable. But in the WAD report we have created filter Tab , which will display the values entered in the Variable screen wil display. But for this Business Area Hier Variable , we are not getting this displayed. when we use the Char variable for this we are getting the values in the WAD report Filters.
we need to display the hier value entered in the variable screen to be displayed in the filter tab of WAD Report
Regards,
srinivas
Edited by: srinivasaraju Penmetsa on Jun 25, 2009 1:06 PM

Dear,
Maintain JEX1 & JHX1 as 100% in ur condition Type.
Also maintain in SPRO , in Classifucation Condition type as
TAXINJ JHX1 AT1SETOFFT AT1 Set Off condition Total
TAXINJ JEX1 ECSSETOFFT ECS Set Off condition Total
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 4, 2009 1:05 PM
Edited by: Pardeep Malik on Mar 4, 2009 1:07 PM

Adobe field values not getting displayed in UWL workitem

Hi,
We filled a ISR Adobe form and submitted it and generated the corresponding notification number.
On clickng the 'display and print form', the form is gettin displayed properly.
But on checking the form at the approvers UWL, the field values are not getting properly filled.
The form is getting properly displayed at R/3 through IQS22 and also the data values are properly attached to the notification number( checked through ISR_PROCESS_EVENT ).
Kindly help.
Thanks and Regards,
Anto.

Thanks for publishing your own solution!
Cheers,
Noë

OAF - Values not getting displayed in Search Page

Hi all,
I have developed a search page with the search citeria mapped to the search panel. I have created VO for this attribute and selected the value from View in this VO(Viewobject). I have created the Query region and set the property of Construction mode as autocustimazationcrietria.
Now my problem is when am running this page and search through any value or simply if i pressed the Go button,no value is being displayed in the page.
I have checked the value and same view and the query is returning value in Toad.
If someone can helpout this issue,it would be great help for me.
Thanks,
Renu.

Hi Renu ,
Since its working perfect for other query , it should also work for the query you have mentioned above .
Please make sure that you have shuttle the VO to the AM , and check the View Instance name and View attribute
for every field that are there in the query region is appropriate .
You can also run the below query with the search criteria parameter by passing it in where clause (run it from sql developer / toad ) , and check
whether you are able to get the result set in back end .
SELECT hca.attribute1 division, acac.customer_name,
hca.account_number customer_number, acac.collector_name collector,
NVL (acac.overall_credit_limit, 0) credit_limit,
NVL (acac.credit_available, 0) available_credit,
NVL (acac.balance, 0) open_balance,
acac.customer_status customer_status
FROM hz_cust_accounts hca, ar_customer_accounts_ce acac
WHERE 1 = 1
AND acac.customer_number = hca.account_number
AND acac.currency_code = 'USD'.
Keerthi

ECess Value not getting displayed in MIGO

Dear All,
When I do a GR against a PO the Ecess Value doesnt flow in MIGO. ( PO created with Non-deductible excise tax code.)
Please note the below details also.
We are using SAP 4.7 version & our tax procedure is TAXINJ.
So can anyone explain how the excise values are determined & displayed in MIGO in case of Non-Deductible excise?
Note: My BED & S&H cess values are displayed in GR but not ECess.
Awaiting your valuable replys.
Regards,

Dear,
Maintain JEX1 & JHX1 as 100% in ur condition Type.
Also maintain in SPRO , in Classifucation Condition type as
TAXINJ JHX1 AT1SETOFFT AT1 Set Off condition Total
TAXINJ JEX1 ECSSETOFFT ECS Set Off condition Total
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 4, 2009 1:05 PM
Edited by: Pardeep Malik on Mar 4, 2009 1:07 PM

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

Values not getting displayed in the selection screen for Hierarchies?

Hi All,
Our system was upgraded from BW 3.1 to 2004s. The quality system displayes values when query result is filtered for a hierarchy infoobject but the production system does not display any values and sometimes throws an error 'The operation failed because of a server error. See system logs.' There is no changes done for hierarchies in both the systems.
Please let me know if anyone has had similar problems.
Thanks,
Krishna

Hi All,
Our system was upgraded from BW 3.1 to 2004s. The quality system displayes values when query result is filtered for a hierarchy infoobject but the production system does not display any values and sometimes throws an error 'The operation failed because of a server error. See system logs.' There is no changes done for hierarchies in both the systems.
Please let me know if anyone has had similar problems.
Thanks,
Krishna

Quantity field not getting displayed for all document types

Hi,
I have made a configuration to include field Quantity(BSEG-MENGE) in the GL account line item display.When I ran the report for stock adjustment account(FAGLL03), only the following document types are showing quantity against them.
WI- Inventory document
WA-Goods Issue
WE---Not showing quantity against (WE- Goods Receipt)
Can any one please explain. I have seen the original document from FI document. The original document as well as FI document carries quantity.
Thanks
Aravind

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Functional module table parameters values not getting displayed in Java sys

Hi,
We are calling the Table parameter through Java code from functional
module ZCRM_ICSS_PROJ_CUST_USR is not giving any rows value .If I execute
the same functional module with passing the import parameter value User
id: MLDL010 its giving value in CRM.
I am checking Function module( Remote enabled ) in Debugging mode,
before displaying values it is raising message like
SY-MSGNR - 005
SY-MSGTY - CRM_LINK
in T100 Table
SPRSL : EN
ARBGB : CRM_LINK
MSGNR : 005
TEXT :'No Links corresponding to the specified data could be determined'
Is that related to any communication problem CRM & JAVA ICSS System ?
Regards,
Pavan.

The message in simple English just means that "You are doing something really bad" !!! It is absolutely not the communication problem, but understanding problem.
Though you may be executing the same function using SE37 or in the webshop application through JCo, the runtime context is different and without knowing what exactly your Z rfc is doing, it is very difficult to help. To start with, the userid - that is who is running the RFC is different in both situations. In SE37, it is the logon user and in the web, depending upon whether the connection is stateless or stateful, it could be the anonymous ICSS user or the logged in user. Here again, if you have used UME, it is the user id and if you have used ALIAS user, then it is the alias user id. This is just an example. Your runtime context can be different due to many other reasons too.
So, to make this simpler - what is that you are trying to do?
BTW, try not to create multiple threads for the same issue..

List Of Values not getting displayed in BI launchpad

Hello All,
When i am running the report in BI launchpad, List of values are not displaying . throwing below error.
Detail Error:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: while trying to invoke the method com.businessobjects.mds.olap.protocol.bics.BICSClient.getCube() of a null object loaded from field com.sap.sl.proxyconsumption.services.olapaccessservice.BICSDiscoverServer.bicsClient of an object loaded from local variable 'this'
@The same report is working fine in WEBI Rich client.
I am using 4.1 SPO3 Patch 2
Please Help on this.
Thanks,
Ramesh

Hi,Supriya!
We are having problem looking like that (After report had been made if I click Refresh button and wait for Values for prompts - the same error message appears).
My user is in admin group and if log as Administrator - nothing changes.
Could you give me advice?

Usage value not getting calculated for equipment PRTs in production order

Dear PP Gurus,
I have assigned a PRT equipment to pouring production routing.
I have assigned the followings:
          1. control key as "1" in the operation.
          2. usage value as 1 ea in standard value in the operation
          3. Formula maintained in the operation as ZAPF02= SAP_09 * SAP_16
                          SAP_09 (Operation quantity) -> general operation value , field name- MGVRG
                          SAP_16(PRT std value) --> Value from PRT allocation , field name- EWVGW
The production order is calculating the planned consumption of PRT usage, but when I confirm the operation, it is not calculating the actual usage usage value. Actual usage value should be number of moulds confirmed in the molding operation confirmation.
Kindly help me urgently.
Regards
Amar

Hi,
I got the issue.
In IE02- equipment measuring point change, we need to assign the same in the PRT screen also.
But now a new error coming-
Document 3 already entered for the measurement time specified
Message no. IR027
Diagnosis
You are trying to enter a measurement document for a measuring point that has been defined as a counter.
However, a measurement document that has not been reversed already exists at the measurement time you have entered.
The system must be able to determine a unique sequence for the measurement documents to be able to recalculate the counter readings if necessary.
System Response
The system will not allow the existence of two measurement documents for a measuring point where the measurement times are the same to the exact second. The system must be able to order the measurement documents in a sequence if it has to to recalculate the counter readings.
Procedure
Check your entry.

Value not getting resetted for Node inside Node

Hi All
I have created the node structure as below
A (Value Node)
|_ID (value attribute)
|_B (Value Node)
    |__Val (Value Attribute for Node B)
Now the code is as follows
for(i = 0 ; i < n ; i++ ){
Ele Aele = createElement
Aele.setID("1")
nodeA.addElement(Aele)
for(j = 0 ; j < n ; j++ ){
    Ele Bele = createElement
     Bele.setVal("Val1")
     nodeB.addElement(Bele)
Now i want for ID - 1 , Val - a,b,c
when sec time loop iterates
ID - 2 , Val - d,e,f
But the problem is that
For ID - 1 , i am getting Val - a,b,c,d,e,f
when sec time loop iterates
ID - 2 , Val - a,b,c,d,e,f
I hope you all can get what my problem is..
Kindly comment and help me out
Regards
Sonal Mangla
Message was edited by:
        Sonal Mangla

Hi ,
There are a lot similar posts in forum.
You can also search help.sap.
Try this link. They have explained creation of similar context structure.
http://help.sap.com/saphelp_nw04/helpdata/en/13/4cde139306304480e89d815ffcf891/frameset.htm
Regards
Bharathwaj

Adobe form output not getting displayed for the whole length of the page

Hi All,
I have developed an adobe form using webdynpro application. While testing, the output(pdf) does not occupy the entire page/screen from end-user side. But when I test the same from my side, the output appears fine . Could anyone suggest me on this?
Regards,
Allwin.

Did you check the resolution at end user side? Is it different from your resolution?
To overcome this check what is the height and width you have specified for InteractiveFormUI element in your Web Dynpro application. Have you specified in pixels like 300px? You need to enter it as 100% for both.
Chintan

Values not getting displayed for members which doesnt have parents

Similar Messages

Maybe you are looking for