Values not passing from program to Layout

Hi Abaper's
My requirement is I need to set company logo in Invoice ( VF03 ) if a particualar condition satisifies, for this I have set a FLAG in my
driver program and called the FLAG in my Script Layout.
Here my issue is, for certain invoices the FLAG set in the program is being called in the Layout and Logo is displayed in invoice copy ( when excuted both in foreground and back ground).
But in certain invoices, if run in foreground none of the values ( means not only flag but also all the values to be passed to layout)
is displayed in invoice. It is only displaying the hard coded values in the layout ( showing blank page ).
and if I run in background all the values are passing to layout except all Global Variables (flags) in the program even though it
has value in the program.
Please advice what should be the problem, I have checked with my Functional and it seems to be fine in customization part.
Karthik
Edited by: Karthik R on Sep 21, 2010 2:42 PM

Hi Tamas,
I have tried it, but still not able to figure out the exact problem....since while running in background or foreground some of the all values including my logo are displayed in invoice but for some invoices none of the values from driver prgram is getting passed to layout while running in forground....but when run in background all values are passing except the FLAG set in the drvier program.
what should be the reason for this ? for some invoices all the values from driver is passing to layout but for some cases its not passing

Similar Messages

  • Field Value not passed from IDOC (orders01) to File Generated

    Hi All,
    I have added a custom field to a PO at item level (ekpo-Ztest)and Passing it to OUTBOUND IDOC.
    In process of passing to IDOC(ORDERS01) i mapped the field to segment E2EDP19001-MFRPN and i see the value in the IDOC when i view it in WE02.
    The problem is when i generate a file i don't see the value of E2EDP19001-MFRPN
    We are already using QUALF,IDTNR,KTEXT of E2EDP19001 and i see all the values of these fields being passed from IDOC to file generated .
    Let me know as i'm missing anything in here
    I quick note ,
    I see 3 version for E2EDP19 Segment for orders01
    Vesrion
    002     E2EDP19002                             8     242     02/14/2005
    001     E2EDP19001     40A                    5     160     08/19/1997
    000     E2EDP19             30A                     3     108     04/03/1995
    1)The version 000 and 001 are released but not 002 Version
    2)May be i 'm using version 000 and its out put length is only 108 and these fields(QUALF,IDTNR,KTEXT) together occupy 108 and there is no room for my new field but My IDOC dispalys E2EDP19001 and E2EDP19002 and also it displays my new field but its the output file generated that doesn't show the value
    Thanks

    Resolved Myself
    Thanks

  • Values not passing from form to context attributes (value attributes)

    Hi Experts,
    I have bound the properties of theadobe interactive form (WD-Java) to the context attributes but the values are not passing to the value attributes at runtime.
    For your information I have not bound the pdfsource binary attribute of the view to the custom controller pdfsource binary attribute.
    Please advise.
    Thanks,
    Shobhit

    Context
       GetData - ModelNode mapped to controller context (DataSource)
             Attribute1 - Value Attribute (Form Field)
    Is it allright to have the Data Source as a ModelNode (mapped to the controller context node) and then have Value Attributes under the ModelNode which are then bound to the adobe form input fields.
    I know its frustrating to advise on such questions without looking at the code actually. But I would definitely need your support.
    If possible could you mail me a project of yours where you have the form being PREFILLED with some values coming from a RFC FM and then the same form gets posted to SAP though another RFC FM.
    Thanks,
    [email protected]
    OK. When I create a Fresh Adobe Interactive Form application, it works fine.
    The problem Im facing is in the case, when Im using an existing PDF file created in the ABAP stack (TCode SFP). I am importing this PDF file into the WebDynpro Java Application and then binding the fields. So in this case the context binding does not work.
    You guyz are right, I need to check if there is any other script which exists. But still what are views after this update?
    Message was edited by:
            Shobhit Swarup Mathur

  • VALUE NOT PASSING FROM 1 PAGE TO OTHER PAGE ?

    Hi friends
    I have bsp application  with 3 htm pages.
    I have a input value in first page like i_matnr.
    If i give input material no its valu is coming in second page.
    But its not coming in 3rd page.So what i have to do?
    Moosa

    Hi:
    you should put like
    in page attribute,
    declare matnr
    and in oninputprocessing or at where you have put your query.
    matnr = request->get_form_field( 'matnr' ).
    Regards
    Shashi

  • Unable to detect any parameter in html (webresource) when value is passed from onload method of form

    Unable to detect any parameter in html (webresource) when value is passed from onload method of form
    I am trying out some stuff. For which I created a simple Entity. In the form of the entity I have added a simple web resource (html). And for the onload of the form I am calling the following function
    function HelpDeskActivityOnLoadhandler()
     var customParameters = encodeURIComponent("first=First Value&second=Second Value&third=Third Value");
        Xrm.Utility.openWebResource("tsi_scriptzz",customParameters);
    Here is the code for the  tsi_scriptzz.html
    <html>
     <body>
      <script type="text/javascript">
        var vals = new Array();
        if (location.search != "") {
         vals = location.search.substr(1).split("&");
         for (var i in vals) {
          vals[i] = vals[i].replace(/\+/g, " ").split("=");
      </script>
     </body>
    </html>
    MY PROBLEM IS -> location.search is always coming back with empty string. So, it not getting the parametrs I am passing from the load method of the form.
    Could someone kindly help me.
    Thanks,
    Hasib

    Hello, I tried it myself. I got a new_test.htm file and a new_test.js file. The loadWebResource function is called on the OnLoad event of an Entity.
    function loadWebResource()
    var params = encodeURIComponent('param1=value one&param2=value two&param3=value three');
    Xrm.Utility.openWebResource('new_test.htm', params);
    <html>
    <head>
    <title>Web Resource Parameter Example</title>
    <!-- Use ../ClientGlobalContext.js.aspx if your webresource is in a deeper folder on CRM -->
    <script src="ClientGlobalContext.js.aspx" type="text/javascript"></script>
    <script type="text/javascript">
    document.onreadystatechange = function () {
    if (document.readyState == 'complete') {
    var params = getParams();
    for(var i=0; i<params.length; i++)
    log(params[i].name + ' ' + params[i].value);
    // this functions puts the params in a 'dictionary format'
    // f.e params[0].name = param1 & params[0].value = 'value one'
    // You could customize this function or find some on the internet to retrieve a param fe by name...
    // This is just an example how to get the name and values
    function getParams(){
    var params = [];
    var querystring = Xrm.Page.context.getQueryStringParameters().Data;
    var querystringparts = querystring.split('&');
    for(var i=0; i<querystringparts.length;i++)
    var split = querystringparts[i].split('=');
    params.push({
    name: split[0],
    value: split[1]
    </script>
    </head>
    <body>
    </body>
    </html>
    Hope it helps now. Kind Regards

  • Do not pass from sign in page

    I down loaded Elements 12, it is installed but do not open.  Do not pass from sign in page.  I have windows 8 OS.

    Hi Jeff.  Yes, I was prompted to enter my Adobe ID, after that the program did not continue.  It only show a little circle spinning on the lower right.  But after 5 minutes it still was spinning.
    De: Jeff A Wright [email protected]
    Enviado el: martes, 10 de diciembre de 2013 11:57 a. m.
    Para: panamito
    Asunto: Do not pass from sign in page
    Re: Do not pass from sign in page
    created by Jeff A Wright <http://forums.adobe.com/people/JeffAWright>  in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5917358#5917358

  • Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Hi,
    Did the issue happen only for you or for multiple users?
    Make sure phone update to the latest firmware.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Value not passing urgent

    data:l_lotno like /JJVC/ERR851-master_lot_num,
            l_batno like mchb-charg.
    loop at i_inv_data into wa_inv_data.
        l_batno = wa_inv_data-charg+0(1).
        if l_batno ca SY-ABCDE.
          translate l_batno to upper case.
          l_lotno = wa_inv_data-charg.
          perform f_idoc_851.
          perform f_idoc_52 .
          perform f_idoc850.
        else.
          if wa_inv_data-charg na SY-ABCDE
            and wa_inv_data-werks eq c_us11.
            l_lotno = wa_inv_data-charg+0(6).
            perform f_idoc_851.
            perform f_idoc_52 .
            perform f_idoc850.
          endif.
        endif.
      endloop.
    data:l_lotno like /JJVC/ERR851-master_lot_num,
           l_batno like mchb-charg.
    IF p_werks EQ c_us11.
        SELECT   a~docnum    "doc number
                 b~credat    "creation date
                 b~status    "status of idoc
                 b~statxt    "last error message
                 FROM /jjvc/err851 AS a INNER JOIN edids AS b
                 ON adocnum = bdocnum
                 INTO TABLE i_idoc_error
                 WHERE a~master_lot_num eq l_lotno
                 AND werks EQ p_werks.
        IF sy-subrc <> 0.
        ENDIF.
    the data in l_lotno and l_batno is not passing from the above if condition to the select statement can any one help me in this.

    You have to declare the l_lotno and l_batno as global variables.
    here they are local variables and their scope is withing the block in which they are defined.
    Declare them outside the blocks(Performs etc)
    Regards,
    Ravi

  • Long time ago I trialed elements 9  and could not remove from Programs; still can't

    Long time ago I trialed Elements 9  and could not remove from Programs at the time; still can't?
    I didn't go forward with '9' because of its size and it didn't appear to provide advantages for the cost.
    How do I uninstall it when conventional methods fail. Message received in Windows Installer is, ' The feature you are trying to use is on a network resource that is unavailable.' Elements 9 cannot be used.

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

  • My iTune Match does not pass from step 1

    My iTunes Match does not pass from step 1.  Every time I start it I get an error msg (4010).  Does anybody knows whats the problem?

    There is a robust discussion about this here:
    https://discussions.apple.com/message/18858414?ac_cid=tw123456#18858414

  • Screen filed values are not passing to program

    Hi Good Evening,
      I have appended strcture ZCORP to LFA1. The ZCORP structure having two fields ZGRP_D & ZNAME1. In the screen  I have added two screen fields LFA1-ZGRP_D & LFA1-ZNAME1 from data dictionary.
    When I enter values to these two fields it's not passing back values back to the program.
    The declaration would be like
    DATA: LFA1-ZGRP_D LIKE LFA1-ZGRP_D ,
          LFA1-ZGRP_D LIKE LFA1-ZGRP_D .
    After pressing save I need to copy these values into below fields.
       zmat_grp = LFA1-ZGRP_D.
      zgrp_d   = LFA1-ZNAME1 .
    But the values in LFA1-ZGRP_D & LFA1-ZNAME1  showing blank. Please guide me where is going in this case.
    I will be very helpful.
    Thanks & Best Regards,
      Mahesh

    Hi,
    You need to pass or assign the values in PAI.
    MODULE user_command_9000 INPUT.
    MOVE LFA1-ZGRP_D  TO zmat_grp.
    MOVE LFA1-ZNAME1  TO zgrp_d .
    ENDMODULE.
    Hope this helps you.
    Plz reward if useful.
    Thanks,
    Dhanashri.
    Edited by: Dhanashri Pawar on Jun 18, 2008 1:12 PM

  • Wrong value is passing from one form to a other form's parameter

    I am passing value from one form to another form using following code
    DECLARE
         pl_id ParamList;
    pl_name VARCHAR2(10) := 'task_id';
    BEGIN
    pl_id := Get_Parameter_List(pl_name);
    --destroy_parameter_list(pl_id);
    IF Id_Null(pl_id) THEN
         null;
    ELSE
         destroy_parameter_list(pl_id);
    END IF;
    pl_id := Create_Parameter_List(pl_name);
    pl_id := Get_Parameter_List(pl_name);
    IF NOT Id_Null(pl_id) THEN
    Add_Parameter(pl_id,'PARAM_SEIT_ID',TEXT_PARAMETER,'120');
    END IF;
         call_form('D:\dir1\form1', no_hide, no_replace,query_only, SHARE_LIBRARY_DATA, pl_id);
         delete_Parameter(pl_name,'PARAM_SEIT_ID');
    exception
              when others then
                   message('Error'||sqlerrm);
                   message(1);
    END;
    I am created a parameter with the same name in the other form, but value is not passing to that parameter properly. it is showing value
    -5153000000000000000000000000.
    Please solve my problem

    Try this code
    DECLARE
    PA_1 VARCHAR2(30);
    PA_2 VARCHAR2(30);
    PA_3 VARCHAR2(30);
    PA_4 VARCHAR2(30);
    PA_5 VARCHAR2(30);
    PLISTREP paramList;
    BEGIN
    /* give value to parameter */
    PA_1 := :PARAMETER.P_1;
    PA_2 := :PARAMETER.P_2;
    PA_3 := :PARAMETER.P_3;
    PA_4 := :PARAMETER.P_4;
    PA_5 := :PARAMETER.P_5;
    PLISTREP := Get_Parameter_List(pl_name);
    IF Not Id_Null(PLISTREP) THEN
    Destroy_Parameter_List(pl_name);
    End If;
    PLISTREP := Create_Parameter_List(pl_name);
    IF Id_Null(PLISTREP) THEN
    Message('Error creating parameter list '||pl_name);
    RAISE Form_Trigger_Failure;
    END IF;
    /* ADD_PARAMETER TO PARAMETER_LIST */
    Add_Parameter(PLISTREP,'P_1',TEXT_PARAMETER,PA_1);
    Add_Parameter(PLISTREP,'P_2',TEXT_PARAMETER,PA_2);
    Add_Parameter(PLISTREP,'P_3',TEXT_PARAMETER,PA_3);
    Add_Parameter(PLISTREP,'P_4',TEXT_PARAMETER,PA_4);
    CALL_FORM(name_of_your_form,no_HIDE,NO_REPLACE,QUERY_ONLY,SHARE_LIBRARY_DATA,PLISTREP);
    I have tried to adapt to your case.
    Hope it helps you,
    Fabrizio

  • Metadata values not showing in Site Studio layout using Idoc Script

    Hi All,
    We have a SS layout (secondary) with replaceable regions for showing content that is listed in a primary page dynamic list.
    Part of the layout shows contribution elements of Contributor Data File content items, but part of layout also shows metadata values. We use <!--$DOC_INFO.dDocTitle--> to show the content item Title with no problems.
    However, for some content items, some metadata values are not showing on the layout - specifically a custom metadata field called xFinishDate (which is of type 'Date' in Config Man). The code <!--$DOC_INFO.xFinishDate--> simply does not work (nothing is displayed) for some content items, despite definitely having a set FinishDate value. Some other content items show this value fine.
    The <!--$DOC_INFO.dDocTitle--> value works for ALL items, but the <!--$DOC_INFO.xFinishDate--> does not, and there appears to be no difference between the items that it does, and does not work for. They are all CDF, same DocType, same CheckIn profile, etc.
    The non-working items are all released and indexed. Their Content Information in Content Server shows complete metadata. I have resubmitted the non-working items for reconversion in Repo Man but no luck.
    Is there something I am missing? Any help is greatly appreciated.
    Luke.

    Actually the default DOC_INFO resultset that is on the page seems to be for the content item being loaded into the secondary layout's replaceable regions. This is why DOC_INFO.dDocTitle gives the results expected.
    However, I think I have discovered why the xFinishDate value was not showing. Using sapan's code (and modifying it a bit) I was able to print out all the metadata field names and values for default DOC_INFO resultset.
    Using this URL as an example: http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011217
    At the top of page region (replaceable) where the Contributor Data File is loaded into, the DOC_INFO resultset is relevant to the content item that is being loaded into the layout (content ID: BD3_011217 - as per the URL format), which is what we want.
    However, throughout the Contributor Data File content, if a link is made using the Site Studio link wizard via FCK Editor (in the above case, it is the position description link, which is a link to a PDF) and the link is 'Link to a file' and the 'Choose Target section' is selected as 'Use default website section metadata', the resulting link looks like "http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011216". Any references to the DOC_INFO resultset on the page after the instance of this link now use the metadata of the content item referred to in the link, not the original content item. I have dumped out the DOC_INFO fields/values in different parts of the layout to prove this. The linked content item has no xFinishDate value so this is why nothing displays (displaying xFinishDate needs to happen after the link to the position description).
    I guess I need to either:
    - change the way the link is made to the content item to "Link to the Content Item's URL", but I would prefer not to expose the resulting path e.g. "[!--$HttpRelativeWebRoot--]groups/group-name/@account-name/documents/content-type/content-id.pdf"
    - explicitly make a resultset using <!--$executeService("SS_GET_SEARCH_RESULTS")--> with the content ID I know I want and use it instead of the default DOC_INFO one. Is there any other way to make a resultset comprising of a single item's metadata?
    9.45 SS_GET_SEARCH_RESULTS
    ■ Description: This is a wrapper around the regular CS GET_SEARCH_RESULTS
    service. It allows some Site Studio features to be specified simply as flags and have
    the real query syntax be constructed on the server. It can modify the standard
    'SearchResults' resultset to contain an additional column called 'ssUrl' which will
    contain the Site Studio-friendly url for all of the search results.
    ■ Parameters:
    – siteId: the unique identifier of the site (required).
    – ssLimitScope: True/False, restricting scope to within the site only (optional).
    – ssUserSearchText: user-supplied search text (optional).
    – ssWebsiteObjectType: object type (optional).
    – computeFriendlyUrls: True/False, modify results to include ssUrl (optional).
    ■ Returns: resultset named ’Search Results’.
    ■ Security: The user must have at write access to at least one security group on the
    content server
    Thanks to everyone for their help. Almost there!
    Edited by: lukeb2112 on 18/01/2010 17:30

  • Change document  - Workflow Event Container value not passed

    Hi Iam working on a customer create notification scenario where in we are sending a notification to SAP Inbox whenever a customer is created.We are checking industry key(KNA1-BRSCH) value through a check function module.When the customer is created in the system the system triggers the corresponding even it gets in to check module and an exception is raised saying Industry key does not have any value.
    Problem is Industry key value is not passed on to the container.
    Where might be the problem...?
    Is anything missing in SWEC(Events for change document)
    -but the event is trigerred...container value for industry key not passed...
    Please advice...
    Thanks in advance!

    Refer to link below.
    Sandy

  • Excise Duty Value not flow from J1IJ to VF01

    Hi SAP Expert,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
    Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
    But once i set, it will impact other billing document too. Please advise.
    Thanks.

    Hi,
    I have successfully posted Excise Invoice at Depot using J1iJ.
    When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
    I analyse the pricing condition for condition type JEXP, below is what i got :
    This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
    There are different reasons for this:
    1.The condition was deleted manually in the item condition screen.
    2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
    If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
    1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
    2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
    Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

Maybe you are looking for