Values not populated in AET STATE RECORD

Hi all,
I have a state record with the fields
PROCESS_INSTANCE
RUN_CNTL_ID
OPRID
COUNTER
ACCOUNTING_DT
FZAM_COUNTER
FROM_DT1
TO_DT1
SOURCE
I am fetching values into the above state record from z tables in my app engine.
Step :step 02 Action :SQL
%SelectInit(ACCOUNTING_DT,COUNTER)
SELECT ACCOUNTING_DT
, COUNT(*)
FROM PS_FZAM_VND_GL_STG
WHERE GL_DISTRIB_STATUS = 'N'
GROUP BY ACCOUNTING_DT
Step :step 03 Action :SQL
%SelectInit(FROM_DT1,TO_DT1)
SELECT FROM_DT1
, TO_DT1
FROM PS_FZGL_RUN_DT_HDR
WHERE SOURCE = 'AM'
But i find FZAM_VEND_AET.COUNTER , FZAM_VEND_AET.TO_DT1, FZAM_VEND_AET.FROM_DT1 all empty eventhough PS_FZAM_VND_GL_STG & PS_FZGL_RUN_DT_HDR has values in them.
additional infor :AET record is FZAM_VEND_AET which is a sql table and process_instance is the only key.
Kindly share ur views

The log entry you are showing here does not come from your Requester ABCS, rather from the AIA Error Handling code itself not being
able to find the mentioned property EH.DEFAULT.FYI.ROLE in the AIAConfigurationProperties.xml.
I guess you want to verify if your version of AIAConfigurationProperties.xml in MDS (not on the file system) has this property set or not. Per default, it should be.
From what you posted here, there is no evidence that the EH code in your generated ABCS does not work properly.
Gerhard

Similar Messages

Virtual Characteristic value not populating in the query output

Hi Experts,
I am new to BAPI and I am using this to populate the values of virtual characteristics.
I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
The below is the compute method of my implementation class.
FIELD-SYMBOLS :
<fs_0cs_order> TYPE ANY,
<fs_zww_teco> TYPE ANY,
<fs_status> TYPE ANY.
if p_cha_0cs_order > 0.
ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
endif.
if p_cha_zww_teco > 0.
ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
endif.
Select single /BIC/ZSYSTATUS
    from /BI0/PCS_ORDER into <fs_status>
   where CS_ORDER = <fs_cs_order>.
if <fs_status> CP 'TECO'.
<fs_zww_teco> = 'Y'.
else.
    <fs_zww_teco> = 'N'.
endif.
But I am not sure why the values are not populated. But when i debug , i could see the values for
P_cha_0cs_order = 35
p_cha_zww_teco = 54
But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
Can you please guide where i am missing ...
Thanks
Vamsi
Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

Hi Sushant,
RSRT --> Enter Query Name
Click on Technical Information --> If " Virtual Char./Key Figures " = Y
In my case , even then i clciked generate report,
even after that P_CHA_0CS_ORDER = 35
and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
Can you please guide me .
Thanks
Vamsi

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Value not populating in the print out (sales order) for the 1st time

Hi friends,
While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
Please give me some clue on where to check and how to go about fixing this problem.
Regards,
Shanu.

Dear Shanu,
This issue may be related bug in the output program so take help of ABAPer to fix the issue.
I hope this will help you,
Regards,
Murali.

Values not populated in S_ALR_87012806 for a specific cost element

Hi all,
Postings made to specific cost element are not populated in report S_ALR_ 87012806. Can anyone throw some light on this?
Thanks
Shravan

Hi Krishna
I dont think "Cost Accounting > LIne Item" would work for Master Data
You can use exit COOPA_01 (SMOD) > Include ZXAUFU08 (Part of EXIT_SAPLKOAU_002)... I have used this for similar purposes in the past
Regards
Ajay M
Edited by: Ajay Maheshwari on Nov 12, 2010 12:45 PM

Value not populated for new field - in RSA7 for PI interface in BW

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

Badi-Virtual keyfigure value not populating in query

HI all,
I am trying to populate a constant value into the virtual keyfigure when the query is executed but the value is not getting populated.
I followed the steps how to do this by looking into the step by step process for keyfigure article which i found in SDN.
When i execute my BADi in se19 i am able to get the value but not in the query.
Is there a special way to create keyfigures or is it the same way as we create a normal keyfigure.
Can someone tell me how to get the values in query.
Thanks in advance.
Regards,
Harish

Hi,
why dont you debug the badi while executing the report from RSRT t-code. This will give you some idea.
To debug, put a break point in 'define' as well as 'compute' function of your Badi-implementation, then go to RSRT t-code, enter your query name and then click generate. It will stop at the break-point. Here you can see what is the problem
Regards
akshay

LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

Hi BI Guru's
I have created a WEB interface for BPS in BI ( version 7.0) . But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material.
When I click on "input help" the system open a new window for "Value selection". When I specify the material code, it gives me blank LIST OF VALUES.
But it is working for other fields like Customer, UOM in the same layout.
Please suggest some solution.
Thanks,
Nilesh Labde

hi,
Thanks for the reply.
Master data is avaliable for the Material Code. The problem is in Internet Explorer and not in SAP GUI .
If i run Planning folder for the same layou in SAP GUI it is working fine.

Values not populating in list box in dialog programing.

hi,
i am facing a problem i.e. i am having a listbox on screen , in pbo i am filling that listbox with some values in an internal table.
But i am not able to populate the values i.e. while i am debugging the pai ......the list box is containing nothing.
So needed some help in this issue.
regards,
somesh

Hi,
Try to read these links. It will give you some pointers regarding on your problem.
<link-farm removed>
Revert if you have still any concern.
Thanks,
iostreamax
Edited by: Suhas Saha on Feb 21, 2012 8:50 AM

Purchasing Groups values not populated in PR default settings - ME51N ??

Hi,
We have SAP R/3 MM ECC 6.0.
I want to set Purchasing Group as one of the default parameters in ME51N (Purchasing Requisition) screen.
The problem is I have selected 'Purchasing Group' as a default parameter in 'Default Values'/ 'Personal Settings' but,
the Drop-down help does not show up any values for Purchasing Group to be selected as default.
However, I can set-up 'Account assignment' & 'Item Category' as defaults and, I can choose their default values.
Therefore, in result, I do not have any Purchasing Group set as default for my PRs.
Is there a configuration setting required to populate the drop-down box of Default Settings (for purchasing group)
with Purchasing Group values? Please advise.
Could this be a bug?
Thanks,
Ruchika

Hi Karthik,
I have already done these steps.
The problem is - Purch. Group field is there in Default settings but, it doesn't show me any values to select from and
set a Default value.
None of the purchasing groups available in system are appearing here. The selection list is Blank.
Is there anything I need to do to bring the P.Group values in the drop-down selection list of Personal settings?
Thanks,
Ruchika

Adobe Form Enumerated Dropdowns values not populated

Hi All,
have a scenario where, I have to fill in a dropdown dynamically when I click a button. I get the values from a function module. I have done this using Isimpletypemodifiablestep. It worked.I have the form too. But when I try to re-implement the same for a new requirement, its working only if I give the values during initialisation .
Why is this inconsistent?
Can we modify Simple types only during initialization? I have tried to add the values to the drop-down in controller and map the attribute to view. Even that didn't work.
I'm
Am using Adobe Live cycle designer 7.1 and NWDS 7.1
SAP 2004s SP15
Thanks,
Vasu

Hi,
       Try with this code...
     int iCommodityCode = wdContext.nodeIt_Commodity_Output().size();
     String commText = null;
     String commCode = null;
     IWDAttributeInfo CommodityAttinfo = wdContext.nodeCommodityNode().getNodeInfo().getAttribute("CommodityCode");
     if (CommodityAttinfo != null) {
          IModifiableSimpleValueSet commValSet = CommodityAttinfo.getModifiableSimpleType().getSVServices().getModifiableSimpleValueSet();
          commValSet.clear();
          commValSet.put(" ", "Please select one");
          for (int i = 0; i < iCommodityCode; i++) {
               commCode = String.valueOf(wdContext.nodeIt_Commodity_Output().getIt_Commodity_OutputElementAt(i).getCommodity());
               commText = String.valueOf(wdContext.nodeIt_Commodity_Output().getIt_Commodity_OutputElementAt(i).getComm_Text());
                              commValSet.put(commCode, commText);
          wdContext.currentCommodityNodeElement().setCommodityCode(" ");
You have to execute the RFC in doInit of the View and use this code in the click event of your button.
If it still doesn't work it must be the problem with webdynpro lifecycle methods.... The context is available only after certain lifecycle methods are called.. i.e. wdDoPostProcessing() method of Component Controller. Check if you are trying to access the context before the Component Controller is not initiated completely.
Let me know if you need any further help....
Regards
Ramesh.

Value not populating in report of MB5T ALV report

I had written a logic in implicit of this standard report and iam trying to populate the value in the ALV fieldcatalog.
Iam unable see the value on output screen though the value gets calculated correctly in debug mode.
Any suggestions

Hi venkata
use COMMIT WORK.....maybe it's too fast and it is unable to store the value...
and try to set a break.point before the call of ALV..and check if the table is correctly calculated.
regards
Marco
Edited by: Menegazzo Marco on May 24, 2010 4:09 PM

Message type is not populating in the Inbound idoc control record

Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
Mallika

Hi,
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul

Net value in the Invoice not populated correctly

Hi friends,
The net value in the Invoice is not populated correctly. The sales order unit price is say 100/EA and the qty is 10 and the net value is 1000 Rs. THe invoice is also showing up the unit price and qty similar to the sales order but the net value picked is 500Rs. There are no discount conditions as well. What might be the possible reasons for this?
Thanks
Isaac

Hi,
Check whether you have entered th value manually in the sales order and overwritten the condition record value .If so also check you copy control setting in VTFL that pricing type B is maintained at item level for the respective doc type .
It can happen that you have condition record maintained for 50rs per quantity and you have changed price manually in sales order to 100 per qty. Now if in copy control VTFL pricing type B is maintained than system will redetermine the prices at the billing level.
If this is the case than change the settings in VTFL pricing type at item level to D
Please check and revert with your feed back
Regards,
Krishna O

Values are not populating...

After selecting the data from LOV the values are not populating in the respective fields.
i've checked the 'LOV' no problem in that,but im think below coding have a problem.
declare
     b boolean;
begin
     :global.job:=null;
     clear_form(no_validate);
     b:=show_lov('view');
     :GLOBAL.ADDNEW1:=0;
--     go_block('JOB_CARD_MAIN');
     GO_ITEM('JOB_CARD_MAIN.BRANCH_CODE');
     set_block_property('job_card_main',default_where,'job_no='||chr(39)||:job_card_main.job_no||chr(39));
     execute_query(no_validate);------after this line get execute the values get disappear from the field
     insert into da.mylog(username,tname,mdate,oper) values(user(),'Job Creation',sysdate,'S');
     commit;
end;
Pls help..

Which trigger do you have this code in? I'm guessing it is a Key-ListVal trigger.
Have you tested the WHE RE clause in SQL*Plus to ensure it returns a record set? Most likely, the query returns no rows which could explain why the block is empty. Also, why are you clearing the entire Form instead of just the JOB_CARD_MAIN data block? Perhaps you should try:
Go_Block('JOB_CARD_MAIN');
Clear_Block(NO_VALIDATE);Also, the EXECUTE_QUERY built-in does not have a NO_VALIDATE parameter. It only supports the following parameters:
ALL_RECORDS
FOR_UPDATE
or the combination of the two (ALL_RECORDS,FOR_UPDATE). It also allows you to set the Locking mechinism by passing the parameter NO_WAIT.
Just a suggestion, try your query in SQL*Plus to make sure it produces a record set and Comment out all the extra stuff in your code and only keep the SHOW_LOV, CLEAR_BLOCK, SET_BLOCK_PROPERTY and EXECUTE_QUERY to see if a row is returned. If yes, then add the rest of your code back one line at a time.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Values not populated in AET STATE RECORD

Similar Messages

Maybe you are looking for