Values not visible in DTN

Dear all,
I am not able to see the values in the DTN iview. I have set the level of navigation in TLN to 2 and starting level of DTNat 3.
However I do not see any values in the DTN. Please let me know wat could be the issue.
Regards,
Noufal

-> 1) Is it a fresh installation? Was it displaying before you have tried to make some changes in TLN and DTN iViews?
No it is not a fresh installation. It was getting displayed earlier and I don't think there was any change we did on the TLN or DTN. The preview of the DTN actually displays values in it. Just that the values do not get displayed when it is view on the pages
-> 2) Are you using FQDN (Fully qualified domain name) when accessing portal?
I tried accessing the portal in both ways with and without the FQDN
-> 3) Any Javascript errors in browser? Which browser and browser version you are using?
No Javascript errors

Similar Messages

  • Value not visible in combo box

    Hi all,
    I have a control bar with 5 combo boxes.
    As the user set the value on a box the others are refined to
    include only those items that are relative to the user selection.
    All works well with one exception in one list the value is
    present bu not visible.
    Has anyone encountered this before and does anyone know how
    to correct it?
    Thanks in advance for any help.

    Duh.
    In the one case where the item fails to show I was not
    casting the value as a string.
    Casting solved the issue.

  • Value not visible in preview mode

    Hello there,
    On my dashboard, between other things, I have a simple grid component which should just show some resulted values.
    The problem I have is that when I connect the grid with the range of cells, everything looks fine but in preview mode, one line in the midle of the grid is showing "0.0" on all cells of the line and I do not understand why.
    The version I have is 5.3.4.0 with build no: 12.3.4.1038
    Any idea what to do?
    Thank you,

    Hi,
    When you are connecting your grid component it only taking static data, but while preview it is taking data from your data source. So I guess there is a possibility that your resulting data set contains a blank row (check your data from data source).
    try to create one more data grid with the same data set, but fetch populate the data into different location. See if it is still giving you the same problem.
    let us know if you already tried this before.
    Good Luck.

  • OIM11gR2 DBAT User recon - custom UDF value not visible in User detail page

    Hi,
    I have configured DBAT connector for OIM11gR2 for user recon.
    Have created and mapped few custom UDFs in the GTC.
    User is created successfully in OIM, and has all the values correctly in USR table for all the custom UDFS.
    But when i search a user in OIM, i can not see the value of custom UDF, even though it is in the database.
    I have created and activated a sandbox and also added the custom UDF in the user details page using the Design option of ADF.
    Is there something I am missing related to display of custom attribute and its value on the USer details page.
    Kindly suggest.
    Regards

    Yes, your UDF should be available under Manage Users->UserVo1. It is working fine with our env. make sure you have the latest version of R2 release, because Beta release had an issue for same. You can create aonther UDF and and try gain.
    verify same with below doc
    http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABEGECJ

  • Screen-field value not visible

    Hi All ,
    I have added couple of fields to the standard transaction .Used  a badi to achieve that.Now am able to send the values from one of the methods in the same badi to the custom field and a standard table is getting updated (which was created with append structure ).But am not able to see that value in the custom field after saving .
    How come this is possible as the DB is getting updated .
    Is there anything to be done in the module pool program or how ??
    Regards ,
    Hemanth Nugur .

    hi .Am using this badi to add custom fields in trading contract(WB22) .WB2_ADDITIONAL_DATA.
    Everything is working fine except am not able to see the value passed onto the field .I am passing the value from the method CHANGE_BEFORE_UPDATE .
    Thanks

  • Lookup columns values not visible in Sharepoint designer

    I had created a lookup column for a list.
    I had generated a stp and created a new list in the new environment.
    The lookup columns were not working, so i created new columns with the existing name.
    But when i eid t aview in designer, i dont seem to find the clumn values.
    Could you please help.

    Hi,
    It is known issue that on exporting list items, look up column values are lost.
    For your issue, you can take steps as below to retain look up column values in export list template:
    1. Browse to the source Web’s lookup list “Sub Category” and choose Modify settings and columns.
    2. Copy the source lookup list GUID from the URL. It should be a sequence of numbers and letters similar to:  %7BFFA47BF8%2D849C%2D4F20%2D9C50%2D173D2F5B6725%7D.
    3. Browse to the destination Web’s lookup list and choose Modify settings and columns.
    4. Copy the destination lookup list GUID from the URL. Similar as point 2.
    5. Delete %2D from the string and replace with a dash sign (-). There should be no dash sign (-) at the start and the end. GUID should be in the following format: FA47BF8-849C-4F20-9C50-173D2F5B6725
    6. Save the source Web’s list that contains a lookup column “Category” to the lookup list as a list template called category.stp.
    7. Export the list template STP from the source list template gallery to the file system.
    8. Rename the category.stp file to category.cab so Windows can open it.
    9. Open the file, right click on the manifest.xml file and export it to the file system.
    10. Edit the manifest.xml file; find the source Web’s lookup list GUID and replace it with the destination Web’s lookup list GUID.
    11. Save the manifest.xml file.
    12. Open a VS.NET command prompt.
    13. Run the makecab command as: makecab manifest.xml category.stp
    14. Import the new STP into the destination Web’s list template gallery. You will need to delete it if it has previously been imported.
    Reference:
    http://sharepointknowledgebase.blogspot.com/2012/09/retain-look-up-column-values-in-export.html#.VPg8d3kcQiQ
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Drop down values not visible

    Hello All,
    i have a drop down which is filled by the data from R/3. When i run my Web Dynpro appliocation, the drop down is getting populated, but when i run in the portal initially the drop down shrinks such that it dosent have any values but there are values in the drop down and upon refreshing the value are shown.
    Like the same way the Road Map also initially it looks there is no steps available and upon refreshing the steps are visible
    What could be the problem?
    Any clues?
    Thanks
    Gopal.

    Hi,
       Thanks for updating. You can also consider rewarding points if my answer helped
    Regards,
    Harini S

  • Default values for static report parameters are not visible when scheduling

    Hello
    Crystal Reports 2008 Dev
    Crystal Reports Server 2008
    When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
    In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
    However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
    I have published in the following 3 ways:
    Publishing Wizard
    File > Save As > Enterprise from withing Crystal Reports Dev
    CMC > Folders > Add > Crystal Reports
    The results are the same for each method of publishing.
    To try to eliminate any DB issues etc i have created a report that is not attached to a datasource. 
    This test report has one Static parameter. 
    I have set 3 values for its list: Entry A, Entry B, Entry C
    Entry X is set as the parameter Default Value
    The parameter is placed in the details section of the report
    When the report is Viewed it will prompt for parameter entry, with the default value present
    When I try to schedule the report is will not have an entry for its parameter
    It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
    Is this a config problem that i have ?
    Can anyone help me with this ?
    Best regards
    Patrick Coote
    Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
    Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

    Hi Robert
    Thanks for the reply and apologies for not responding sooner.
    What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
    Although this is a bit clumsy, it is sufficient for now
    Best regards
    Patrick

  • Table values are not visible

    Hi,
    I have designed the GUI, which contains JTable.
    Every time the table is loaded with some values dynamically, after doing some operation.
    The table values are first stored in the vector and set to DefaultTableModel.
    The DefaultTableModel contains two vectors, in which first vector will have row values and
    second vector has column name (or heading, always it is four).
    The problem is only 40 row's values are visible in GUI.
    Not able to move the scroller down to see the table values after the 40th row.
    Please suggest me in what way i can correct this problem.
    Thanks & Regards

    calvino_ind wrote:
    kathyayini wrote:
    Its not stupid.
    I know that there are more than 40 rows.
    Because i have displayed the values which are loaded into table and also i am writing the table as excel file.
    Don't act to smart.he wasn't acting smart, but actually acting dumbYeah as if your first comment asking whether he added a JScrollPane was much smarter, especially because the OP mentioned that he has a scroller in the GUI...
    Be it as it is, you could post the relevant code snippet here.

  • Value attribute not visible in runtime collection

    Hi,
    I have created some 2-3 value attributes (display only) in a standard model node for BTDOCFLOW (which also contains some display only fields). Put in the logic in their Getter methods and fields are getting displayed in UI with the values.
    Now, my requirement is to display this table view (Assignment block) in default sorting based upon one value attribute and one model node attribute. But the problem here is, I am unable to find value node attribute at runtime in BTDOCFLOW collection at DO_PREPARE_OUTPUT. (Even display only standard context node attributes, which are not part of model node structure are not visible)
    I have re-defined method GET_TABLE_LINE_SAMPLE with the value attributes, resulting in enhanced rv_sample line, but still the value attribute is not visible at runtime in the collection.
    Can someone pl. tell me, how can I display my value attributes in collection along with model node attributes, so that I can do default sorting based upon one custom and one model node attribute.
    Thanks,

    Hi,
    Whne you define value attributes within the model attribute then the node becomes mixed instead of either value node or model node.
    So you need to access the mixed node and then should access model attributes and value attributes separately.
    Get your collection into a normal entity then assign the entity to mixed node
    DATA: lr_mixed TYPE REF TO cl_bsp_wd_mixed_node ,
                current TYPE REF TO if_bol_bo_property_access,
                 lr_current TYPE REF TO cl_crm_bol_entity.
         current ?= me->typed_context->entity name->collection_wrapper->get_current( ).
          lr_mixed ?= current..
          lr_current ?= lr_mixed->if_bsp_wd_ext_property_access~get_model_node( ).
    Best Regards,
    Dharmakasi.

  • Characteristics value assignments screen- the results button is not visible

    Dear Gurus,
    In variant configuration, while i am assignning characteristics values in the characteristics value assignments
    screen, the results button is not visible. Even when I try to go to the results option from the Menu (GOTO > Results),
    it is disabled.
    Can any one tell me why is it so ?
    Regards

    Hi
    I have checked my config profile. it looks ok to me.
    Can u suggest anything in particular that I need to check.
    Rgds
    Vishal Saha

  • Return results from custom dialog box not visibly updating field value

    I have a form with custom dialog boxes (execDialog) for data entry. The dialog box is being called from the Entry event successfully. I also have it called from the Click event. So, here's what I get:
    1. On entering the field, I get the dialog box pop up, I select a value, it visibly changes the field raw value and leaves focus in the field.
    2. If I exit the field and re-enter, it also works as in point 1 (as expected)
    3. If, while focus is already in the field, I click in the field, I get the dialog box, as expected, but after selecting a value from the dialog, the field raw value DOES NOT VISIBLY change until I exit the field! It's kind of like the click event is working in conjunction with the Exit event. This is totally counter-intuitive for a production form that is being designed for the general populace.
    Anyone had any experience with this?
    Cheers,
    Marty.

    Thom Parker answered this here: http://forums.adobe.com/message/2614570#2614570
    Answer copied below:
    "The problem is that when the focus is on the text box
    it's in edit mode. It's only displaying the value interactively entered by
    the user, or as a consequence of the change event.  What you need to do is
    force the focus off of the text box in code.  You can do a little trick
    where you bounce it to a tiny transparent field, which then bounds the focus
    back so it doesn't look like the focus changed."
    What I ended up doing was calling up the dialog box, then using setfocus with no parameters to remove focus from the field, as follows:
    this.rawValue = this.dialogBoxFunction(this.rawValue); // passing current value so dialog box defaults to that value
    xfa.host.setFocus();
    Cheers,
    Marty.

  • There was an attempt to change the value of a control that is not visible.

    I am getting the below error on submitting on a screen.
    "There was an attempt to change the value of a control that is not visible. The submitted value for this control has been discarded."
    I am setting the values of the controls in "OnGetScreenEventHandler, OnInvestigationEndedEventHandler" implementation. Is there any way to check if the control is visible?
    Thanks,
    Rajan

    Hi,
    How Do I Check for the control Visiblity in the above said event handler?
    Here is my code
    private void formattAllDate(SessionContext currentContext) {
         log.debug("R2_XSR: Formatting all date");      
    setGlobalInstanceValue(currentContext,"Date1",formatDate(getGlobalInstanceAttribValue(currentContext, "Date1")));
    setGlobalInstanceValue(currentContext,"Date2",formatDate(getGlobalInstanceAttribValue(currentContext, "Date2")));
    setGlobalInstanceValue(currentContext,"Date3",formatDate(getGlobalInstanceAttribValue(currentContext, "Date3")));
    setGlobalInstanceValue(currentContext,"Date4",formatDate(getGlobalInstanceAttribValue(currentContext, "Date4")));
    setGlobalInstanceValue(currentContext,"Date5",formatDate(getGlobalInstanceAttribValue(currentContext, "Date5")));
    setGlobalInstanceValue(currentContext,"Date6",formatDate(getGlobalInstanceAttribValue(currentContext, "Date6")));
    setGlobalInstanceValue(currentContext,"Date7",formatDate(getGlobalInstanceAttribValue(currentContext, "Date7")));
    private void setGlobalInstanceValue(SessionContext currentContext, String attribute,Boolean value){
         try{
              currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance().getEntity().getAttribute(attribute).setValue(currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance(), value);
         }catch(Exception e){
              e.printStackTrace();
    private String formatDate(String dt){
    String newdt[]=dt.split("/");
    if (newdt.length==3){
    return newdt[1]+"/"+newdt[0]+"/"+newdt[2];
    return "";
    }

  • Batch characteristic value not populated!

    Hello guys,
    please would appreciate advice to following:
    I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
    Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
    Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
    Any idea how to populate these chars in batch?
    Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
    Thanks for prompt replies!
    Br, Jan

    Hello,
    SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
    Issue solved using non reference charactereristic and adding code into ZXMBCU04.
    Br, Jan

  • Values not getting saved in DFF in iSupport

    Hi,
    I have enabled DFF in iSupport, which is visible to users. Users are able to enter values in the fields, but after SR is created, the values are not visible in SR update screen in iSupport nor in SR form in customer support.
    Does anybody know what could be wrong?
    Regards,
    Mohammed

    Mohammed,
    Did you try to bounce Apache and see if this helps?
    Please review the following documents and see if it helps.
    Note: 404603.1 - iSupport Not Showing the Descriptive Flexfiels (DFF)
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404603.1
    Note: 272398.1 - Service Request External Flex DFF Is Not Visible In iSupport
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=272398.1
    Note: 594111.1 - Service Descriptive Flexfield Not Visible In iSupport
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=594111.1
    Regards,
    Hussein

Maybe you are looking for