Values u200Bu200Bnot reversed in the areas

Hi friends.
When I finish a Purchase Order process, I can see the correct values in area 01 and area 3 and 4 (tax1: Pis and tax2: Cofins).
When I reverse this PO, the value in area 01 is reversed, but th values in areas 3 and 4 is not.
How do I reverse the values to areas 3 and 4? May I create new types of negative movements will not be counted in ASKBN?
Thanks in advanced.
GLippmann

Hi
Seems there are inconsistency happened in the asset. Could you let me know how you reversed the PO and what message issued during the reversal processing please?
Regards
George

Similar Messages

ERROR in MR8M - The acquisition value is negative in the area 02

Hello,
I am not able to reverse by MR8M a document released in MIRO, of an error: "The acquisition value is negative in the area 02 - AA617 message. "
Can anyone help me?
Thank you in advance,
Luiz Henrique

Hi,
The reason wold probably be that the Asset master would have been already capitalized or it would have been de-activated. Kindly check with your finance team before processing MR8M.
Regards,

Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

In XML Output the values of Number column tags are not displayed properly

Hi,
Our Client have been using AR Invoice Print Program for a long time and it is heavily customized. Also they are using an old version of the RDF. So we have taken the latest version of the RDF (RAXINV.rdf) for Oracle Apps 11.5.10.2 by raising a SR and implement Client's old RAXINV.rdf into it.
All was ok, but when we are running the program, the XML Output did not generate properly. For the Q_INVOICE query (G_ORDER_BY, G_INVOICE and G_INV_TERM group), the value of some of the scaler number columns are not appeared properly. The tags are coming correctly, but the value is appearing as '*', instead of the correct value. We have checked in the RDF Level (By putting srw.message and check in the log file) that those columns are having proper value. So there is no issue with the RDF.
But because of the above mentioned problem, the some of the PDF output field values also is not generated correctly.
I think that because of the lexical parameters which was implementing the Q_INVOICE query (&COMMON_QUERY) this issue is coming. Because the issue is only in the Q_INVOICE query group (G_ORDER_BY, G_INVOICE and in G_INV_TERM group) not in any other query group.
There is no problem with the scaler character columns. The issue is only with the number columns.
Also we have checked that if we hardcode the value of the number columns in the above mentioned lexical parameter, this problem doesn't appear.
If we put TO_CHAR function to those number columns in the lexical parameter (COMMON_QUERY), then this issue get solved. But we can't do it because of performance issue and also Client won't approve it.
Please help.
With Thanks and Regards

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi,
Am trying to develop a report the parameter has an issue, it gives me an error.
There are 2 parameter (1st is Date range like start and end date and 2nd is Loan number)
When ever I select date range the Loan number parameter should go blank. If I input a loan number then date range should go blank.
What should I do. Please help
ERROR --report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi Kay_MD,
If there are only two parameters, we can use first parameter charge the second one, but the second one cannot charge the first one in turn. Because parameter forward dependencies are not valid. To achieve your requirement, we can create another parameter
to control Date_range and Loan_number parameters. For more details, please see:
Add a parameter named ReportParameter1 with two available values: Date_range and Loan_number.
Use the following expression as the default value in Date_range parameter:
=iif(Parameters!ReportParameter.Value="Date_range",1,"") (1 means a useless value)
Use the following expression as the default value in Loan_number parameter:
=iif(Parameters!ReportParameter.Value="Loan_number",1,"") (1 means a useless value)
Please note that the Date_range and Loan_number parameters should enable Allow blank value (“”), and the blank values should also be contained in available values.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

When priniting jewel case inserts, my song order is reversed. The numbering is correct, but the song titles are incorrect. This only happens on jewel case inserts. Any insight would be greatly appreciated.

When priniting jewel case inserts, my song order is reversed. The numbering is correct, but the song titles are incorrect. This only happens on jewel case inserts. Any insight would be greatly appreciated.

Hi,
I have exactly, exactly!! thesame annoying problem you have or had. I don't know what to do and i am reallyfrustrated with the dumb limited inside the box solutions offered to me. It'slike if you have a problem with your ipod or iphone you can either restore it,uninstall/reinstall itunes and thats pretty much it. I am sorry but that isjust f***** up.
anyway, regardless to all that,i was wondering if you had any success in solving this problem (something otherthan using a different computer which oddly enough seemed to work for somereason..?? why???, weird) since April.
I am on the edge of givingup.
thank you in advance.

[svn] 4611: Various bug fixes in effects, mostly in the area of seeking, auto-reversing, and shader transitions.

Revision: 4611
Author: [email protected]
Date: 2009-01-21 16:30:21 -0800 (Wed, 21 Jan 2009)
Log Message:
Various bug fixes in effects, mostly in the area of seeking, auto-reversing, and shader transitions.
QE Notes: None
Doc Notes: None
Bugs: sdk-17783, sdk-18767, sdk-18759, sdk-18461, sdk-18309, sdk-18013, sdk-18688
Reviewer: Jason
Tests: checkintests, Mustella: Effects, gumbo/effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-17783
http://bugs.adobe.com/jira/browse/sdk-18767
http://bugs.adobe.com/jira/browse/sdk-18759
http://bugs.adobe.com/jira/browse/sdk-18461
http://bugs.adobe.com/jira/browse/sdk-18309
http://bugs.adobe.com/jira/browse/sdk-18013
http://bugs.adobe.com/jira/browse/sdk-18688
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Animation.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/FxAnimateShaderTransition.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/SetAction.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateShaderTran sitionInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddChildAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddItemAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Parallel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/RemoveChildAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/RemoveItemAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/SetPropertyAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/SetStyleAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/UnconstrainItemAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ParallelInstanc e.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SequenceInstanc e.as

Revision: 4611
Author: [email protected]
Date: 2009-01-21 16:30:21 -0800 (Wed, 21 Jan 2009)
Log Message:
Various bug fixes in effects, mostly in the area of seeking, auto-reversing, and shader transitions.
QE Notes: None
Doc Notes: None
Bugs: sdk-17783, sdk-18767, sdk-18759, sdk-18461, sdk-18309, sdk-18013, sdk-18688
Reviewer: Jason
Tests: checkintests, Mustella: Effects, gumbo/effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-17783
http://bugs.adobe.com/jira/browse/sdk-18767
http://bugs.adobe.com/jira/browse/sdk-18759
http://bugs.adobe.com/jira/browse/sdk-18461
http://bugs.adobe.com/jira/browse/sdk-18309
http://bugs.adobe.com/jira/browse/sdk-18013
http://bugs.adobe.com/jira/browse/sdk-18688
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Animation.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/FxAnimateShaderTransition.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/SetAction.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateShaderTran sitionInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddChildAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddItemAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Parallel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/RemoveChildAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/RemoveItemAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/SetPropertyAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/SetStyleAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/UnconstrainItemAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ParallelInstanc e.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SequenceInstanc e.as

How can I select an area of a picture (larger than one pixel) and find the average RGB values of all the pixels contained inside the area?

I'm analysing the differences between several different images and I would like to select a large area of each (such as with lasso tool) and find the average RGB value of all of the pixels within the selection area made/

With the selection you could do a copy paste and use the histogram of the new layer set the histogram source to selected layer. The eye dropper sample size may also to get the average of a square area around a point.

TDS not reversed at the time of clearing Vendor after down payment is made

Dear SAP Gurus,
I have a problem in Withholding tax. I have made a down payment and tax is deducted on that.
Then I raised an invoice on which tax is deducted.
Now I am trying to clear a part of the amount in which I have raised an invoice and the TDS is not getting reversed.
Can someone help me please.
1) I have checked the "central invoice proportionately" in WHT type for payment posting.
2) The TDS on the invoice has not been paid.
I am getting the problem with this vendor only.
Regards,
Hari

Hi,
You have to assign TDS tax codes at the time of payment as well as at the time of invoice in vendor master.
when you are making down payment TDS should be deducted on the down payment amount (base value)
at the time of payment
say Rs5000/- you are making down payment ..........now tds is deducted on 5000/- and bill value is 60000/-
Now you are creating an invoice with FB60 or MIRO , you chage the TDS base value (bill value- down payment)=(60000-5000)=55000/- and assigned to TDS code (at the time of Invoice ) and make TDS base value as Zero against the TDS TAX codes (at the time of payment) and simulate it and post it so that TDS will be deducted on Rest of the amount i.e 55000/-
for checking , you can manually calculate TDS on 60000/- =(tds on 5000+ tds on 55000/-)
now you clear The down payment against the Invoice.
with Regards,
Sudipto

GR value not 0 though the GR quantity is 0 in PO history

Hi,
We have an issue with a PO in which, the finance team has wrongly created invoice. After creation of IR, GR was done. But the person who has done GR didn't know that the IR value was wrong, by the time FI team told that IR value is wrong, GR has already been done. Later we had reversed the GR, by doing which GR quantity was 0 but GR value still exists in PO history.
Please help how to make this value 0.
Thanks and Regards,
D. Krishna Bharadwaj.

Moderator message:
please do not ask for sending OSS notes. There is a particular reason that you can only get it with a registered user. Hence publishing them is copyright infringement. so do not ask others to break the rules.
Ask your basis team to grand you access, or have them or any other colleague download the note for you
Do not post your email address in public forums in general, robot programs are looking for such info and use it to distribute spam mails. It is for your own safety, if you want your email address be visible, then make the settings in your user profile.
regards
Jürgen L
Moderator

Reversal of the segment of assement cycle possible ?

Dear SAP Experts
I am looking on the below issue
User has executed an assessment cycle KSU5 with segment with wrong assignment of receiver internal order , after execution the values from cost center are posted to wrong internal order.
The problem is for reversing the cycle it contains 37 segments which does not require to reverse all the segments for one wrong segment.
Please suggest whether any possibility to reverse the segment and correct the segment and rerun the cycle for that segment or any other solution for this issue .
Thanks
Pardha

if you want to reverse only one segment , try to lock segments for which , no reversal has to be performed.
Also check Segment Adjustment in KSU5.
regards,
ramesh b

Reversal of the Invoice Verification Document

Dear Freinds,
The users are trying to do the reversal of the Invoice Verification Document, but the system gives the error message 'No Reversal possible, Reverse Value must be reset'. When we look at the diagnosis, it suggests that the qty is same but the value is not the same as Invoice. The PO history for this item in the PO does not show any credit note passed which would result in the difference in the value.. What else could we check to resolve the issue.
Thanks!
Regards,

Hi Jeya,
Thanks for the help, we haven't used in BADI or User Exit, how else can we find this out and resolve the issue?
Regards,

How to Do Value Set Reverse Lookup?

I have a concurrent program which has multiple paramaters with various value sets. When I run reports, I want to dynamically list on the output the parameters the user gave. The problem is that these values are often the IDs and not the value the user sees.
Are there any packages in applications that will let me to do a "reverse lookup" with the value sets to get the values the user saw?
Thanks,
Kurzweil4

Kurzweil4,
Is your conc prog in OA code? anyway, you can always use a VO with proper sql to get the value lookup for the IDs.
--Shiv

How to get the values multiple times for the specified element - ABAP IXML.

Hi all,
         i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values. here is the sample xml,
<View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
<AbstractView.InboundPlugs>
<InboundPlug name="ip2">
<ParameterizedFeature.Parameters>
<Parameter name="ippara2">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
<InboundPlug name="hi">
<ParameterizedFeature.Parameters>
<Parameter name="hipara">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
Here i need to store the following values in internal table, the element to get the values are,
(1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
The output will be of 2 records & values should be
Inbound plug name = ip2
Parameter name    = ippara2
Parameter type      = binary
2nd record
Inbound plug name = hi
Parameter name    = hipara
Parameter type      = Visibility
These 2 records should be in internal table and then i will be passing to database table...
Can anyone provide me the code for the above......
Thanks in advance,
Vishnu.

I didn't get ur requirement..
As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
XML ABAP - may b helpfull
Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

How to get value and name of the n'th parameter in a pl/sql funct./proced.

procedure test(name varchar2, birthdate date, zip number, country varchar2);
in procedure x I do
test('Michael Postmann', to_date('03.01.1983', 'DD.MM.YYYY'), 7461, 'AUSTRIA');
And this should htp.print the following:
test: name=Michael Postmann,birthdate=1983/01/03,zip=7461,country=AUSTRIA
In procedure test I want to know:
*) What is the name of myself (the procedure)
*) Optionally: Am I a procedure or a function?
*) How many Parameters do I have?
*) What are the values of them?
*) What are the names of them?
*) Optionally: What are the types of them?
What I actually want to do is:
I have a procedure for logging errors. So in my program I call this function frequently and I want it to log the current time, a string passed to the logging function, the client's ip, etc.... but it should also log a list of the parametrs and values of the procedure/function where the error occoured.
Is there any way to do this (I think in C this is done by argc and argv, but a string containing all the information (as you get it from the WebDb when something goes wrong) would be enough)?
Thx in advance,
Nomike aka Michael Postmann

Name of procedure or function can be retrieved using DBMS_UTILITY.FORMAT_CALL_STACK:
CREATE OR REPLACE FUNCTION fn_whoami (v_in varchar2)
RETURN varchar2
AS
v_stack varchar2(1000) DEFAULT DBMS_UTILITY.FORMAT_CALL_STACK;
v_job varchar2(500);
v_name varchar2(100);
BEGIN
v_job := SUBSTR(v_stack,INSTR(v_stack,'function'),256);
v_name := SUBSTR(v_job,1,INSTR(v_job,CHR(10))-1);
return v_name;
END fn_whoami;
select fn_whoami('1') from dual;
CREATE OR REPLACE PROCEDURE pr_whoami
AS
v_stack varchar2(1000) DEFAULT DBMS_UTILITY.FORMAT_CALL_STACK;
v_job varchar2(500);
v_name varchar2(100);
BEGIN
v_job := SUBSTR(v_stack,INSTR(v_stack,'procedure'),256);
v_name := SUBSTR(v_job,1,INSTR(v_job,CHR(10))-1);
dbms_output.put_line(v_name);
END pr_whoami;
exec pr_whoami;

Values u200Bu200Bnot reversed in the areas

Similar Messages

Maybe you are looking for