Values update in T.Code : KSBT

Hi,
I need complete process (Document / details) on how the values updated in t.code : KSBT. Which is required to explain to the end user.
Appreciated your quick reply.
Regards
Aparna

Normally you update your cost center planning in by following steps:
1- Overhead planning by KP06, you enter cost centes, cost elements and values (Can be manual or automatic through uploading of BDC"
2- Upload your planning hirarchy and sales planning (COPA)
3- Transfer sales value from COPA to SOP by KE1K
4- Run LTP (long term planning. MC8G,MS01
5- Transfer activity from LTP . KSPP
6- Post statistical Key Figures (SKF). KP46
7- Reconciliation of activity . KPSI
8- Splitting of activity. KSS4
9- Price Calculation. KSPI
following above steps will update KSBT automatically. On the other hand, if you know you activity rates and you want to update KSBT manually you can do that in KP26.
I hope above will throw some lights
Ahmed Zain

Similar Messages

EBS Supplier best practice to update vendor site code, update or create a new one

I have a question related to EBS Supplier vendor site code. Application lets you update the vendor site code, but what is the best practice to update the site code?....would you inactivate the exiting one and create a new one? or would you just update the existing value?

Ok,
My workaround was to put in my TaskFlow an action to commit. After that I put two more actions (execute) and then back to my page. This way works but I would like to know if there is any more efficient way to do this just when I am inserting.
Regards

Mouse wheel value update

Hello everyone
I am trying to get the value from "mouse scroll" changed by mouse wheel. The attached code is very simple and seems to be right wired, but it's not working properly. If you run the VI and scroll up and down mouse wheel, you will see that sometimes the value is updated on the indicator, sometimes don't. If you keep using the mouse wheel always on the same direction (i.e. up), the value on the indicator starts to increase but not after every single roll of the mouse wheel. Seems like a lack of sync between the while loop execution and the mouse wheel usage.
Any ideas how to trigger the loop just after mouse wheel usage? I have to sync them.
Thanks
Dan07
Attachments:
Mouse Wheel Value Update.vi ‏10 KB

Mike
I got your Vis and did some modifications to adjust them to my code and everything is working like a charm. But I would like to understand what's going wrong with my code (the one that I attached on the first message of this thread). I did a very very very simple code that was supposed to do the jog, but it is not working. As I roll the mouse wheel the value on the indicator does not update in sync with the mouse wheel (sometimes it updates, sometimes don't). If I have my code working I can put it inside an event structure on the timeout case and use:
Mouser Enter array - feed timeout with 10ms
Mouse Leave array - feed timeout with -1ms
Anyway, thanks for your code.
Please, help me to understand what's wrong with mine.
Aested, my VI works on my computer too, but the value on the indicator does not update in sync with all movements of mouse wheel.
Thanks
Dan07

Qty and value update

hi all sapians,
Can any one give me a very clear idea or story behind the check boxes of quantity and value update in OMS2 and for some material there boxes are checked and for some materials boxes are not selected.
Edited by: MANI ROOPA SD/MM on Apr 21, 2008 8:09 AM

hi
Quantity Updating Specifies that the material is managed on a quantity basis in the material master record for the relevant valuation area.
Value Update: Specifies that the material is managed on a value basis in the material master record for the valuation area concerned.
The values are updated in the respective G/L accounts at the same time.
as you said at for some material there boxes are checked and for some materials boxes are not selected
the Qty and Value are updated based on valuation area
Valuation Area
Organizational level at which the material is valuated. A valuation area can be one of the following:
Plant: All plants belonging to a company code, in which case the valuation area is the company code
1: Based on valuation area and as required some material types are selected and some are not
2: Based on material Type we select Qty and Value updation: like for NORM for your valuation area (and also might be for plant valuation) all boxes are selected and for material type KMATConfigurable materials it is not selcted
regards

Quantity/value updation query

hi all
PR-RFQ/Quotation-Price comparison-PO-GR-IR, when I am doing this process I want only update quantity only, I dont want to update value updation
Pls tell how it is possible is there any configuration required in this scenario
Pls tell me as early as possible

Dear Sandeep,
You can use material type: UNBW when create a material master record, this standard from SAP that only update for Quantity.
Regards,
w1n

Determination of default characteristics values based on Company Code/Plant

Hi All,
We are using batch management and classification. We have defined various Characteristics and maintained values for it.
As per our business process, we create Purchase Order (which may contain many line items) and after that we receive the Goods thru MIGO.
At the time of MIGO user need to enter all the Characteristics of the batch. Out of no. of characteristics few are mandatory and also have got same value (depends on Company Code/Plant).
Currently there is no provision to maintain default values of the characteristics at Company Code / Plant level. Due to this user have to maintain same values again and again at the time of MIGO for each line item/batch. So please suggest us the solution where user need not to enter same values for respective characteristics during MIGO and we can save lot of time and it will help to improve the efficiency.
We also tried to explore the provision of making u201CDefault Valueu201D in CT04, but then that value was getting applied for all the Company Code / Plant which we donu2019t want.
Regards
Nilesh

you have to valuate the characteristics with Object Dependencies
http://help.sap.com/saphelp_bw/helpdata/en/24/4766d4416711d189ec0000e81ddfac/frameset.htm

Creative Cloud desktop failed to update.(Error code: 1)

Hello, I'm running a MacBook Pro Retina with Yosemite 10.10.2. I tried to update Creative Cloud Desktop manager and then tried to cancel it (it was killing my bandwidth while I was trying to work). It disappeared from the bar at the top of the OSx screen.
I couldn't get it back. I restarted my machine. When I clicked on Creative Cloud this time, I was prompted to update, but almost immediately got an error. There are other mentions of Error Code 1 on the forum, but they appear to be first time installations, not updates. Suggestions welcome! Thanks
Creative Cloud desktop failed to update.(Error code: 1)
Update:
Still no success. I tried the instructions here: Error "Failed to Install" Creative Cloud Desktop application which says to uninstall Creative Cloud. I got an error: "Unable to uninstall Creative Cloud Desktop. Quit Creative Cloud desktop and try again." But CC desktop is not running. I had a look in activity monitor and didn't see anything.

Okay - I think I resolved this by closing some stalled processes in Activity Monitor, then restarting Creative Cloud desktop, then updating in the normal way.

Asset values updation in Eco. Dep area 50

Dear All,
I have created one asset for Good will as on 01.02.2010 (go live date 01.02.2010) by using AS91, and i updated APC cost and Acum Depreciation for Dep area 50 - Eco. Depreciation only.
Right now my client want to add some new values (because of wrong value updated at the time of take over values)
How can i do the additions for those assets. i have total 4 Dep. areas but this asset have only one dep. area 50 - Eco. Dep. , more over they run the Dep. for last year (FY - 1st Jan. to 31 Dec.) Please suggest me.
Regards
Radha

Dear Murali,
I have done all those things, and we updated some values for Good Will with Negative sign, but right now we have to add some Negative value in the same asset.
EX: Asset no. 10001
take over values 100000
actual value 250000
Right now i have to add 150000 in that asset
Regards
Radha

Automatic update of vendor code during plant to plant Transfer

Hi all,
How to configure automatic update of vendor code during plant to plant Transfer.
Regards
KK

hi,
In transfer posting there is no buying/selling of the goods...there is only transfers may be from plant ot plant...or storage loc to st location...etc...
When you do plant to plant stock transfer, there is no role of the vendor...but the receiving and the destination plant/storage loc plays a big role...
Hope its clear...
Regards
Priyanka.P

No Quantity/ value update at Movement type

Hello All,
At Material type level with valuation area SAP controls check / uncheck Quantity/ Value updating (OMS2)
In our specific business scaenraios, we use material type (HALB) with valuation area combination with / without Quanity & Value updating. Hnece, above setting will not work in our scenario.
is it possible to have control of Quantity/ Value updating by using a custom movement (ex: copy of 101 to 1Z1)?
Really appreciate your thoughts!
Thanks
Siva

Hii shiva, lots of threads are available regarding this .
have u gone thru.plz search sdn, u will get good reply.
quantity and value update
Quantity update and value update in case of account assignment category
Material Type that updates Value but no Quantity
Quantity and value updates for stock.
quantity/value updation query
hope u will get sm idea.
Note : Do not use SMS Speak.Avoid links while answering,try to give your own suggestions.
Edited by: Jeyakanthan A on Jul 22, 2011 10:25 AM

Sort key '011' (site number) without value update in FI document

Hi
With regards to vendor master already with sort key 011(site number) was maintained. However, there is always no values update on assignment field in the accounting document. The accounting document was integrated thru MM module when logistic invoice verification done thru tcode MIRO.
Can anyone please kindly help.
Regards
Kang Ring

Hi ,
As you are using Std sort key,there should be no problem as there is no other setting other than maintaining the sortkey in the GL.
Please Check the Sort key of the Gl in FS00 which is hitting from MIRO and also confirm that you have maintain the Plant in the concern MM transactions you are referring.
Regards
Jabeen

Quantity/value updating

Dear expert:
i create a PO (with account assignment) with a material belongs to a material type has not set quantity and value updating. i get a material document when i do goods receipt against this purchase order. i know there will no quantity and value update, but i wonder where the data is stored. please give me some clue.
thanks and best regards,

Hi David,
When you are creating PO with qty & value updating untick, system will ask for account assignment mandatory (ex: K cost centre) while creating PO & when you do GR the qty part will go to cost centre consumption & value will be booked for that cost centre used. you can see controlling document in GR, for PO without cost cenre you see accounting entries here you see cost centre entries.
Regards
Rang
Message was edited by:
Ranganath Mysore

Stock adjustment without value update

Dear Experts,
How to make inventory adjustments without value update. Like my client asks me to increase qty of a certain material whose value shoudnot get updated. My requirement is some movement type for stock increasing without generating FI docs.
Thanks,
Nagaraj

Hi
check this link [Physical inventory without accounting doc;
Regards
Kailas Ugale

Suggest Values(Auto Fill) for code and description in WD ABAP

Greetings everyone,
                 I have one ABAP webdynpro application which has to provide the auto fill (Suggest Values) option for one of the field for Eg:Material No.The requirement is the user will have only one field where he/she should be able to search the material either by its name or material number in the same field.Please let me know how we can achieve this.As of now i am able to search by material number using suggest values using my own custom search help.But how can i include the material description also as search option for the material number field.Any help will be appreciated.
Material No:[____________]      <- - -   i should be able to search both by material number and description in suggest values(Autofill)
Thanks,
Vignesh

Hi Thomas,
   You are right. I have exactly thought the same way and i implemented the code as well in the search help exit which will give my own search result to the searching criteria with both number and description. I have able to achieve this for one application and now i am able to search with both number and description in the same field.But when i am trying to get the same functionality for another field ,it is showing a auto fill values but only for code and not for description of the code.I have mentioned below the code i have written in the search help exit and i am passing the list to the source tab and getting the search help result in record_tab.When i test this from normal SAP GUI using F4 functionality it works perfect.But when i try to use this search help via Autofill(Suggest values) in WD ABAP,it is not working the same way what i want.I mean it only searches with the code but not with the description in teh autofill.
Any help will be appreciated.
IF callcontrol-step = 'SELECT'.
    DATA:lwa_selopt TYPE ddshselopt,
         lit_selopt_rsfnr TYPE RANGE OF tn39t-rsfnr,
         lwa_selopt_rsfnr LIKE LINE OF lit_selopt_rsfnr ,
         lit_selopt_desc TYPE RANGE OF stnd_rsfna,"rsfna, "nkdi-stdtext,
         lwa_selopt_desc LIKE LINE OF lit_selopt_desc,
         lwa_tn39t TYPE tn39t,
         lit_tn39t TYPE STANDARD TABLE OF tn39t,
         lv_sel_val TYPE ddshselopt-low.
    READ TABLE shlp-selopt INTO lwa_selopt WITH KEY shlpfield = 'RSFNR'."'DKEY'.
    IF sy-subrc EQ 0.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_rsfnr.
      APPEND lwa_selopt_rsfnr TO lit_selopt_rsfnr.
      lwa_selopt-option = 'CP'.
      CONCATENATE '' lwa_selopt-low '' INTO lwa_selopt-low.
      MOVE-CORRESPONDING lwa_selopt TO lwa_selopt_desc.
      APPEND lwa_selopt_desc TO lit_selopt_desc.
      CLEAR:lit_tn39t[],record_tab[].
      SELECT * FROM tn39t INTO TABLE lit_tn39t
         WHERE spras = sy-langu AND ( rsfnr IN lit_selopt_rsfnr
         OR rsfsn IN lit_selopt_desc ).
      CALL FUNCTION 'F4UT_RESULTS_MAP'
        EXPORTING
          source_structure = 'TN39T'
        TABLES
          shlp_tab          = shlp_tab
          record_tab        = record_tab        " <--- I am getting the result correctlyin record_Tab ..but it is not coming in the output/
          source_tab        = lit_tn39t
        CHANGING
          shlp              = shlp
          callcontrol       = callcontrol
        EXCEPTIONS
          illegal_structure = 1
          OTHERS            = 2.
      callcontrol-step = 'DISP'.
    ENDIF.
    EXIT. "Don't process STEP DISP additionally in this call.
ENDIF.
Thanks,
Vignesh

BAPI or FM to update GL Account Updation at Comppany Code Data (FSS0)

Hi all,
i want a BAPI or FM to update GL Account Updation at Comppany Code Data (FSS0)
SAP Easy Access Menu -> Accounting -> Financial Accounting -> General Ledger -> Master Records -> Individual Processing -> In Company Code.
Thanks

The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Values update in T.Code : KSBT

Similar Messages

Maybe you are looking for