Valution appearing in deactivated mode

Dear Gurus
When I am trying to valuate a inspection lot in result recording screen(qe01) it is in deactivated mode .What can be the possible reason for it?
Regards
Sandip Sarkar

hi
Status 2 is Processed that means values has be entered.
Then check in SU53 after executing valuation
In Su3-->parameter
please maintain
QEE_TEXT_CLOSE     99     Results Recording: Text Color of Completed Item
QEE_TEXT_OPEN     99     Results Recording: Text Color of Open Item
QER                                                  Recording view in results recording
QERF_SOF                                                  Start Results Recording Using Automatic Selection
QERSMAL     X     Limiting Options in the Recording View
QESEL_MAN                                                  Expand Worklist Manually
Regards
Sujit

Similar Messages

Checkbox in REUSE_ALV_HIERSEQ_LIST_DISPLAY appearing in disabled mode.

Hi
I have created check-box in REUSE_ALV_HIERSEQ_LIST_DISPLAY which is appearing in disabled mode. I want to change it into select-able mode. Please advise.

Hi Manu,
you can set that field editable by making change in field catalog -
wa_fieldcat-edit = 'X'
Regards,
Harsh Bansal

When I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

when I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle or changes in the moving waveform graph with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear

# Question
i can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Spotlight results appearing in icon mode

For some reason my spotlight results appear in icon mode instead of list mode. This happens only when I type in an existing finder window. If is bring up a spotlight search window with command-option-space, the results are in list mode.
This started happening soon after 10.6 upgrade.
It happens in other logins as well

Welcome to our community, gillt40
If there were a single issue that seems to have plagued
Captivate, you have hit it. E-Mail reporting is so far from
reliable it isn't funny. The unfortunate part is that there are no
answers. There is no magick solution for it. No setting you can
tweak or forgot to turn on. It's all hit or miss. And judging from
the posts I see here day after day after day that report the same
thing, it's mostly miss.
The fact of the matter is that the only really reliable
reporting you will find is if you use a Learning Management System
(LMS) as that was how Captivate was designed to work best.
Sorry, but all I can do is tell the truth. Then stand back.
Cheers... Rick

Text Caption appears in Edit Mode but not in Preview Project or Web Browser

I'm using Cp4 and have downloaded Adobe Flash 10 Active X, it's ver 10.1.82.76. I've added a simple text caption with these options:
Timing Display: Rest of slide
Appear after: 2.0 seconds
Transition effect: Fade in only
In: .5 seconds
And Visible is checked
I also have a simple line that I drew with the draw line tool and included an arrow on the end of it.
Everything on the screen works including the click box, the animated text and the failure caption. For some reason the text caption and the arrow are not appearing except in Edit Mode. In Preview Project, they disapper but the click box, failure caption and animated text work fine.
I've rebooted, copied this screen into a new instance of Cp4, re-created these objects on a freshly recorded screen, chosen Order: Bring to Front, created a brand new screen completely from scratch and downloaded the Flash 10 Active X version mentioned above.
They funny thing is, is that the text caption and arrow works fine on other screens in the project. I have 76 screens total.
I'm running Windows XP.
Any suggestions?

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Why Payment Guarantee procedure is not appearing in change mode

Hi All,
I am displaying the customer master. The payment guar field is appearing in customer master. But when I go to change mode for the customer master, the payment guar field disappears.
Can somebody throw some light on this.
Note: Pls donot send the configuration details. I have already done the configuration and double checked on the same.
Kind Regards
Chakradhar

Hi Utpal,
Hmm.. this is rather strange. Are you sure it is not entering the SP? Can you try to cancel all operations by changing your SP (make a backup first) to:
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 9999
select @error_message = N'My test error'
-- ADD YOUR CODE HERE
-- Select the return values
select @error, @error_message
Then try to update your document. It should stop you if it is entering. If not then I'd recommend going to SAP support.
Also, if possible, post the code you are using in your SP.
Best regards,
Pedro Magueija

BBC News website appears in "text mode"

The BBC News website has just started appearing in a "text mode". Previously the items were separated and the font was "filled in". Now the articles are all run together and the font appears as an outline.

The problem seems to have cleared.
I used System Restore to go back to a point before I had installed a plug in to enable FF to look at a TV web site. No improvement. (See attachment).
because I had gone back a few days a couple of Win 7 updates had been rremoved. On closing down the pC they were re-installed. Restarting showed no improvement.
I then started to use IE to browse the web and looked at a couple of sites. Then I went back to FF and the BBC site is running perfectly.

Exchange 2010 + Outlook 2013 = Items deleted from inbox, Keep Re-Appearing. (Cached mode outlook only)

Hey Team,
We have a single user who when she deletes items from the Inbox they re-appear (in the inbox), if she is running in cached exchange mode. The items do not re-appear in OWA.
She is not experiencing any network connectivity issues
We have rebuilt her MAPI profile including deleting all existing OST files
We have removed and reinstalled outlook / office 2013
She is the only user with the issue
There are no Sync issues
As soon as we disable cached exchange mode this issue immediately goes away, she is running Office 2013 RTM.
Any Ideas,
Thanks,
Robert
Robert

Hi Robert,
If change another PC to configure her mailbox within outlook 2013, is there the same issue?
In addition, you can try to move her mailbox to another database and check if any helps.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

I upgraded to v16 and now when I go to Hotmail/Qutlook email appears in mobile mode. How do I get it to appear in full browser mode?

How do I get it to appear in full browser mode?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check your security software (firewall) to make sure that if doesn't modify the user agent or otherwise makes the website think that you use a mobile connection.
You can check the network.http.* prefs on the about:config page and reset all bold user set network.http prefs to the default value via the right-click context menu -> Reset.
*http://kb.mozillazine.org/about:config

Another strange RAID 0 SSD query with Asus P9X79 Pro - RAID array appearing in AHCI mode

Hi all, I found this thread:
http://forums.adobe.com/message/4874435
very helpful, as it describes a similar situation to my case (same motherboard). Here is my situation:
historically, this was my setup (all on Asus P9X79 Pro motherboard):
2 x 120Gb Intel 320 SSDs. Operating system on one of them, Lightroom catalogue and photoshop scratch disk on the other.
1 x 2TB WD SATA 3 HDD. All images and other data etc
1 x blu-ray DVD burner
As I am now needing video editing, I have just bought Premiere Pro. My OS SSD was also getting quite full. So, I took the plunge and bought a Samsung 830series 256GB SSD.
My plan was this:
(a) make the Samsung the new OS drive, so lots of spare space for the SSD to play with (plugged into one of the 6 GB/s ports)
(b) make a RAID 0 of the two Intel SSDs (i.e. 240GB volume) to act as Lightroom catalogue, PS scratch disk and Premiere Pro media cache, previews etc etc. This would be on 2 of the 3GB/s ports
(c) keep the 2TB WD HDD for data. (plugged into the other 6 GB/s port)
(d) plug the Blu-Ray drive into another of the 3 GB/s ports
However, I was having a nightmare reinstalling the OS from scratch, so I ended up using Norton Ghost to port the OS across from the Intel SSD to the Samsung SSD. I didn't have a lot of faith that it would work, but it did.... eventually. I have checked SSD alignment and it is correct, and I benchmarked the Samsung and it is flying - it is running to reported values according to AS Benchmark. So, I think that one is working fine - great stuff.
However, this left me with the two Intel 120GB SSDs to try to make into a RAID 0. Apart from the fact that my OS was already installed (and so no F6 driver install), I followed the instructions/suggestions of frogo369 in the forum thread I linked to above. I changed the SATA mode to RAID in the UEFI and then defined the RAID in the CTRL+I Intel RST option ROM utility. I then rebooted the PC.... oh dear.....
The PC started and got as far as the swirling Welcome to Windows sign (i.e. before log on appears), but then came the Blue Screen Of Death - and it gets into a never-ending reboot cycle. :-(
So, I figured that this was because I had changed my SATA mode in the UEFI from AHCI to RAID, but the OS was obviously from a time when I was only on AHCI. Therefore, I changed the SATA mode back to AHCI in UEFI. thankfully, the computer now boots successfully once more into Windows.
BUT, HERE'S THE BIT I DON'T UNDERSTAND..........
Weirdly (for me at least!), when I look at the list of disks in Disk Management, I could see the RAID. It was "unallocated", so I formatted it. It formatted fine. I then opened the Intel SSD toolbox, and it can see the RAID 0 (it even defines it as such). The only thing it won't let me do is really "interact" with it as it says I need Intel RST drivers of 11.0 or newer. But I don't think they are available for the X79 chipset - so no TRIM I think?? I've just benchmarked the RAID and it is doing good numbers - >500Mb/s read and 400Mb/s write if I remember correctly.
But anyway, my question really is two-fold:
(a)Firstly - how can I see this RAID/how is it working, if my BIOS is set to AHCI mode not RAID??
(b)am I likely to see a rapid detioration in the speed of the RAID, given that presumably TRIM won't be working on it?
Sorry for such a long explanation - and no doubt I've missed out huge bits of info you need anyway! But, any help, advice or direction would be very, very, gratefully received!
Tim

OK, an update to my post - I have now found Intel RST drivers for the X79 chipset - they are here, for the benefit of anyone in the future coming across this page:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21852&keyword=%22Intel+Rapi d+Storage+Technology%22&lang=eng
These have enabled me communicate with the RAID 0 array via the Intel SSD Toolbox. I have also confirmed that TRIM is activated on it.
However, this still hasn't answered my original question - i.e. how can I be using these two SSDs in RAID mode if RAID is not enabled in the UEFI? Don't get me wrong - I'm delighted(!!) - but any expertise as to how this is happening would be much appreciated!
Tim

Not all albums appearing in flipbook mode

I have 48 albums on my iPhone, ever since the latest iPhone software update, all 48 appear when viewing the albums in list mode. However, when viewing in flipbook mode, only 22 album covers appear.

What could be the reason displaying my pictures in MySites or search,
but when i create a contact list like above not all the pictures are showing directly in the list by creating above column but i place mouse hover on it or search or go to the profile i am able to see the picture of the profile
MCTS,ITIL

HT1430 dot appear on screen mode camera only

this dot appear mode camera only...any solutions for this?
or hardware problem? thx

Reset iPad and continue with Restore.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Wrong drive appears in Target mode

Hey guys. I know this is probably something very simple, but I'm trying to restore the drive on my G4. I've previously carbon copied my drive to an extra drive in my G5, as I regularly get weird cache problems on my G4. Now that it's happened again, I want to Carbon copy back from the G5 to the G4, but when I connect in target mode with firewire, I cannot find the primary drive on the G4, only some secondary drive which helps me nothing
Is it as simple as switching the actual harddrives around/changing the jumpers on the actual harddrives; or is there some setting somewhere that I'm missing?

Welcome to the Discussions.
"I regularly get weird cache problems on my G4"
That might be a failing processor. There are Apple Hardware Test disk images here. http://www.info.apple.com/support/aht.html

UI Control options do not appear for TCD mode and Webdynpro mode

Hi guys,
When I open the screen Start option in eCATT for ECC 7.0, there is no options for TCD mode and Webdynpro mode, only have for SAPGUI mode. So pls help to me find the options for these modes.
Thanks in advance,
Thien

Hello Friend,
This has been corrected by 640 SAPKB64023 and 700 SAPKB70016.
Please install the relevant SP to your system.
Thanks.
Eric Monteiro

Valution appearing in deactivated mode

Similar Messages

Maybe you are looking for