Vanishing point – Marquee tool – problems with pasting images

For some reason when I paste my selected image into the Vanishing Point tool it comes in with a marquee that is exactly 4 times the size of the image that I originally selected and copied. This completely throws the perspective off as for some reason it thinks my image is 4 times the size it actually is. If anyone could help it would be very appreciated.

You have to be quick...Very quick. Here is a video showing what should happen:
Benjamin

Similar Messages

Problems with pasting image in cs4 turns to group & other images

I know I've turned something on and can't turn it off. I paste a clip art in illustrator and it turns the image into groups and black & white image and other image. I just want the one image I paste to be just the image on the layer and not groups and images. How do I turn that off?
Thanks

File>Place
not
Copy>Paste

Problem with Gif image

Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help would be great! Below is a snip of code:
JPanel toolBarsPanel = new JPanel();
javax.swing.JToolBar toolbar = new javax.swing.JToolBar();
JButton zoomin = new JButton(new ImageIcon("tut/zoomin.gif"));
JButton fullext = new JButton(new ImageIcon("tut/fullextent.gif"));
JButton identify = new JButton(new ImageIcon("tut/identify.gif"));
JButton btn = new JButton(new ImageIcon("tut/addtheme.gif"));
toolbar.add(zoomin);
toolbar.add(fullext);
toolbar.add(identify);
toolbar.add(btn);
add(toolbar, BorderLayout.NORTH);
Thanks again for any help!

I used to do a lot of work in this sort of thing. After a while we were able to convince our bosses to use generated HTML (JSPs, etc.), so the problem moved to porting JavaScript to different platforms! (Platforms in this context means the different browser/OS combinations, etc.).
The only two things I can recommend are:
- complete control over you code. You will have to fix it! (Tried you apps on a Mac yet?)
- assume a minimal install. Don't assume users are going to have any fancy tools installed on their PC, unless you are developing an Intranet app, where you know the spec of the machines that are going to be using it.
As regarding getting IE to use a relative address, I don't think you are going to have any luck their, I'm afraid! (Although I am curious. It has been some time, but I though it did use relative addresses. Are you absolutely sure about this, did you check this out with System.outs and that?
HTH,
Manuel Amago.

Laptop mode tools problem with kernel 3.0

today I just updated the system and my laptop runs dramatically hotter after that. I read the archwiki, it does talk about the laptop mode tools problem with kernel 3.0 but when I opened the file /usr/sbin/laptop_mode, the lines which the wiki mentions are not there. Does anyone here have the same problem and can you offer the solution?
Here is my /usr/sbin/laptop_mode
#! /bin/sh
# Script to start or stop laptop_mode, and to control various settings of the
# kernel, hardware etc. that influence power consumption.
# This script is a part of Laptop Mode Tools. If you are running a supported
# power management daemon, this script will be automatically called on power
# state change.
# Configure laptop mode tools in /etc/laptop-mode/laptop-mode.conf, and in
# the broken-out config files in /etc/laptop-mode/conf.d.
# Please consult the manual pages laptop-mode.conf(8) and laptop_mode(8) for
# additional information.
# Maintainer: Ritesh Raj Sarraf ([email protected])
# Original Author: Bart Samwel ([email protected])
# Project home page: http://samwel.tk/laptop_mode
# Contributors to this script: Bart Samwel
# Kiko Piris
# Micha Feigin
# Andrew Morton
# Herve Eychenne
# Dax Kelson
# Jan Polacek
# ... and many others that I've stopped
# keeping track of.
# Based on a script for Linux 2.4 written by Jens Axboe.
set -a
# The laptop mode tools version number. Extracted by the installer makefile
# as well, so don't change the format!
LMTVERSION=1.59
# This script is loaded from multiple scripts to set the config defaults
# and to read the configuration on top of those. Only when the command is
# recognized does this script do anything else.
VERBOSE_OUTPUT=0
ENABLE_LAPTOP_MODE_ON_BATTERY=1
ENABLE_LAPTOP_MODE_ON_AC=0
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
PARTITIONS="auto /dev/mapper/*"
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360
DEF_MAX_AGE=30
LM_READAHEAD=3072
NOLM_READAHEAD=128
CONTROL_READAHEAD=1
CONTROL_NOATIME=0
USE_RELATIME=1
CONTROL_HD_IDLE_TIMEOUT=1
LM_AC_HD_IDLE_TIMEOUT=4 # 20 seconds
LM_BATT_HD_IDLE_TIMEOUT=4 # 20 seconds
NOLM_HD_IDLE_TIMEOUT=244 # 2 hours
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
XFS_HZ=100
CONTROL_MOUNT_OPTIONS=1
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
CONTROL_HD_POWERMGMT=0
CONTROL_HD_WRITECACHE=0
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=0
LM_HD_WRITECACHE=0
LM_DIRTY_RATIO=60
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10
NOLM_DIRTY_RATIO=40
LM_SECONDS_BEFORE_SYNC=2
BATT_CPU_MAXFREQ=medium
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=ondemand
BATT_CPU_IGNORE_NICE_LOAD=1
LM_AC_CPU_MAXFREQ=fastest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=ondemand
LM_AC_CPU_IGNORE_NICE_LOAD=1
NOLM_AC_CPU_MAXFREQ=fastest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=ondemand
NOLM_AC_CPU_IGNORE_NICE_LOAD=0
CONTROL_CPU_FREQUENCY=0
HD="/dev/[hs]d[abcdefgh]"
CONTROL_SYSLOG_CONF=0
LM_AC_SYSLOG_CONF=/etc/syslog-on-ac-with-lm.conf
NOLM_AC_SYSLOG_CONF=/etc/syslog-on-ac-without-lm.conf
BATT_SYSLOG_CONF=/etc/syslog-on-battery.conf
SYSLOG_CONF_SIGNAL_PROGRAM=syslogd
SYSLOG_CONF=/etc/syslog.conf
CONTROL_DPMS_STANDBY=0
BATT_DPMS_STANDBY=300
LM_AC_DPMS_STANDBY=1200
NOLM_AC_DPMS_STANDBY=1200
CONTROL_CPU_THROTTLING=0
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=minimum
NOLM_AC_CPU_THROTTLING=minimum
CONTROL_START_STOP=1
CONTROL_TERMINAL=0
TERMINALS="/dev/vc/1 /dev/vcs1"
BATT_TERMINAL_BLANK_MINUTES=1
BATT_TERMINAL_POWERDOWN_MINUTES=2
LM_AC_TERMINAL_BLANK_MINUTES=10
LM_AC_TERMINAL_POWERDOWN_MINUTES=10
NOLM_AC_TERMINAL_BLANK_MINUTES=10
NOLM_AC_TERMINAL_POWERDOWN_MINUTES=50
ENABLE_AUTO_HIBERNATION=0
HIBERNATE_COMMAND=/usr/sbin/hibernate
AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
AUTO_HIBERNATION_BATTERY_CHARGE_MAH=0
AUTO_HIBERNATION_BATTERY_CHARGE_MWH=0
MINIMUM_BATTERY_CHARGE_MAH=0
MINIMUM_BATTERY_CHARGE_MWH=0
ASSUME_SCSI_IS_SATA=1
CONTROL_BRIGHTNESS=0
BATT_BRIGHTNESS_COMMAND=false
LM_AC_BRIGHTNESS_COMMAND=false
NOLM_AC_BRIGHTNESS_COMMAND=false
LOG_TO_SYSLOG=1
DEBUG=0
ENABLE_LAPTOP_MODE_TOOLS=1
# Initialize the PATH Variable
export PATH="${PATH}":/bin:/sbin:/usr/bin:/usr/sbin
# This is a 2 phase locking approach. LMT_REQ_LOCK is the outer lock and LMT_INVOC_LOCK is the inner lock
# We take this approach to ensure the scenario that, "At any point when an event occurs (AC/BATT), the
# kernel can generate multiple events spanning over a couple of events. The first event is honored and
# lmt executes. If the last event triggered at the 9th second, there is a fair chance that a good amount
# of state change would have occured in the OS, to honor that state, we keep an outer lock (LMT_REQ_LOCK)
# handy, so that those changes can also be applied and not forgotten.
# Workflow:
# Event-1 is generated and lmt executes (lmt runtime could span 5-10 seconds)
# At seventh second, 4 events generate. But Event-1 is still running.
# We don't want to discard all the remaining 4 events, but at least honor 1 so that we can act to the changes
# that occured in the last 7 seconds.
# So, Event-2 acquire LMT_REQ_LOCK and waits to acquire LMT_INVOC_LOCK (which is acquire by Event-1)
LMT_REQ_LOCK="/var/lock/lmt-req.lock"
LMT_INVOC_LOCK="/var/lock/lmt-invoc.lock"
FLOCK=`which flock`
checkint ()
# $1 arg should be the string/integer
# that you want to check for as an integer.
echo $1 | grep "[^0-9]" > /dev/null 2>&1
return $?;
# Returns 1 if it is an integer
# Function to handle logging
LOGGER=`which logger`;
log ()
# $1 should be msg type
# $2 should be the real msg
if [ x$LOG_TO_SYSLOG = x1 ]; then
# NOTE: Add the check on $2 being empty, once you are confident
# that there aren't any bugs in logging. And no bugs in executing
# modules and logging
if [ -x $LOGGER -a "$1" != "STATUS" ]; then
#if [ -z $2 ]; then
# continue
#elif [ "$1" = "MSG" ]; then
if [ "$1" = "MSG" ]; then
logger -p daemon.info -t laptop-mode "$2";
elif [ "$1" = "ERR" ]; then
logger -p daemon.err -t laptop-mode "$2";
elif [ "$1" = "VERBOSE" ]; then
if [ x$VERBOSE_OUTPUT = x1 ]; then
logger -p daemon.debug -t laptop-mode "$2";
fi
else
logger -p daemon.notice -t laptop-mode "$2";
fi
fi
fi
if [ "$1" = "VERBOSE" ]; then
$LM_VERBOSE && echo "$2" >/dev/fd/2;
elif [ "$1" = "ERR" ]; then
echo "$2" >/dev/fd/2;
else
# Message of type MSG and STATUS can go to stdout.
echo "$2" >/dev/fd/1;
fi
enableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set -vx
fi
disableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set +vx
fi
# No default on these ones -- we need to detect if they have been set, for
# backward compatibility with MINIMUM_BATTERY_MINUTES etc.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=
MINIMUM_BATTERY_CHARGE_PERCENT=
# Backward compatibility variable that is sometimes
# set externally (Debian init system)
unset VERBOSE
lmt_load_config ()
# Source config. Some config settings have been moved from the main config file
# to modular configuration files, and to support existing laptop-mode.conf
# files from earlier versions, we source the modular configuration files FIRST.
if [ -d /etc/laptop-mode/conf.d ] ; then
for CONF in /etc/laptop-mode/conf.d/*.conf ; do
if [ -r "$CONF" ] ; then
. "$CONF"
#Handle individual module debug settings
if [ "$DEBUG" -eq 1 ]; then
export $(basename $CONF | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG=1
log "VERBOSE" "Enabling debug mode for module $CONF"
fi
DEBUG=0
else
log "MSG" "Warning: Configuration file $CONF is not readable, skipping."
fi
done
fi
if [ -r /etc/laptop-mode/laptop-mode.conf ] ; then
. /etc/laptop-mode/laptop-mode.conf
else
log "ERR" "$0: Configuration file /etc/laptop-mode/laptop-mode.conf not present or not readable."
exit 1
fi
if [ x$ENABLE_LAPTOP_MODE_TOOLS = x0 ]; then
log "MSG" "laptop-mode-tools is disabled in config file. Exiting"
exit 0;
fi
# Add a simple bash debug mode switch
if [ "$DEBUG" -eq 1 ]; then
set -vx;
fi
# Support for old config settings
if [ "$AC_HD" != "" ] ; then
AC_HD_WITHOUT_LM="$AC_HD"
AC_HD_WITH_LM="$AC_HD"
fi
if [ "$VERBOSE" != "" ] ; then
VERBOSE_OUTPUT="$VERBOSE"
fi
if [ "$CPU_MAXFREQ" != "" ] ; then
BATT_CPU_MAXFREQ="$CPU_MAXFREQ"
fi
if [ "$MAX_AGE" != "" ] ; then
LM_BATT_MAX_LOST_WORK_SECONDS="$MAX_AGE"
LM_AC_MAX_LOST_WORK_SECONDS="$MAX_AGE"
fi
if [ "$DEF_AGE" != "" ] ; then
DEF_MAX_AGE="$DEF_AGE"
fi
if [ "$LAPTOP_MODE_ALWAYS_ON" != "" ] ; then
ENABLE_LAPTOP_MODE_ALWAYS="$LAPTOP_MODE_ALWAYS_ON"
fi
if [ "$LM_WHEN_LID_CLOSED" != "" ] ; then
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED="$LM_WHEN_LID_CLOSED"
fi
if [ "$REMOUNT_PARTITIONS" != "" ] ; then
PARTITIONS="$REMOUNT_PARTITIONS"
fi
if [ "$READAHEAD" != "" ] ; then
LM_READAHEAD="$READAHEAD"
fi
if [ "$DO_REMOUNT_NOATIME" != "" ] ; then
CONTROL_NOATIME="$DO_REMOUNT_NOATIME"
fi
if [ "$DO_HD" != "" ] ; then
CONTROL_HD_IDLE_TIMEOUT="$DO_HD"
fi
if [ "$AC_HD_WITH_LM" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT="$AC_HD_WITH_LM"
fi
if [ "$AC_HD_WITHOUT_LM" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT="$AC_HD_WITHOUT_LM"
fi
if [ "$BATT_HD" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT="$BATT_HD"
fi
if [ "$DO_REMOUNTS" != "" ] ; then
CONTROL_MOUNT_OPTIONS="$DO_REMOUNTS"
fi
if [ "$DO_HD_POWERMGMT" != "" ] ; then
CONTROL_HD_POWERMGMT="$DO_HD_POWERMGMT"
fi
if [ "$AC_HDPARM_POWERMGMT_WITH_LM" != "" ] ; then
LM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITH_LM"
fi
if [ "$AC_HDPARM_POWERMGMT_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITHOUT_LM"
fi
if [ "$BATT_HDPARM_POWERMGMT" != "" ] ; then
BATT_HD_POWERMGMT="$BATT_HDPARM_POWERMGMT"
fi
if [ "$DO_WRITECACHE" != "" ] ; then
CONTROL_HD_WRITECACHE="$DO_WRITECACHE"
fi
if [ "$AC_WRITECACHE_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_WRITECACHE="$AC_WRITECACHE_WITHOUT_LM"
fi
if [ "$BATT_WRITECACHE" != "" ] ; then
LM_HD_WRITECACHE="$BATT_WRITECACHE"
fi
if [ "$DIRTY_RATIO" != "" ]; then
LM_DIRTY_RATIO="$DIRTY_RATIO"
fi
if [ "$DIRTY_BACKGROUND_RATIO" != "" ] ; then
LM_DIRTY_BACKGROUND_RATIO="$DIRTY_BACKGROUND_RATIO"
fi
if [ "$DEF_DIRTY_RATIO" != "" ]; then
NOLM_DIRTY_RATIO="$DEF_DIRTY_RATIO"
fi
if [ "$DEF_DIRTY_BACKGROUND_RATIO" != "" ] ; then
NOLM_DIRTY_BACKGROUND_RATIO="$DEF_DIRTY_BACKGROUND_RATIO"
fi
if [ "$DO_CPU" != "" ] ; then
CONTROL_CPU_FREQUENCY="$DO_CPU"
fi
if [ "$CONTROL_CPU_MAXFREQ" != "" ] ; then
CONTROL_CPU_FREQUENCY="$CONTROL_CPU_MAXFREQ"
fi
if [ "$AC_CPU_MAXFREQ_WITH_LM" != "" ] ; then
LM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITH_LM"
fi
if [ "$AC_CPU_MAXFREQ_WITHOUT_LM" != "" ] ; then
NOLM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITHOUT_LM"
fi
if [ "$DO_SYSLOG" != "" ] ; then
CONTROL_SYSLOG_CONF="$DO_SYSLOG"
fi
if [ "$SYSLOG_SIGNAL_PROGRAM" != "" ] ;then
SYSLOG_CONF_SIGNAL_PROGRAM="$SYSLOG_SIGNAL_PROGRAM"
fi
if [ "$AC_SYSLOG_WITH_LM" != "" ] ; then
LM_AC_SYSLOG_CONF="$AC_SYSLOG_WITH_LM"
fi
if [ "$AC_SYSLOG_WITHOUT_LM" != "" ] ; then
NOLM_AC_SYSLOG_CONF="$AC_SYSLOG_WITHOUT_LM"
fi
if [ "$BATT_SYSLOG" != "" ] ; then
BATT_SYSLOG_CONF="$BATT_SYSLOG"
fi
if [ "$ENABLE_LAPTOP_MODE_ALWAYS" != "" ] ; then
ENABLE_LAPTOP_MODE_ON_AC="$ENABLE_LAPTOP_MODE_ALWAYS"
fi
if [ "$MINIMUM_BATTERY_MINUTES" != "" -a "$MINIMUM_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
MINIMUM_BATTERY_CHARGE_PERCENT="$MINIMUM_BATTERY_MINUTES"
fi
if [ -z "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
MINIMUM_BATTERY_CHARGE_PERCENT=3
fi
if [ "$AUTO_HIBERNATION_BATTERY_MINUTES" != "" -a "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT="$AUTO_HIBERNATION_BATTERY_MINUTES"
fi
if [ -z "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=2
fi
# Postprocessing
if [ "$VERBOSE_OUTPUT" -ne 0 ] ; then
OUTPUT="/dev/stdout"
LM_VERBOSE="[ 1 = 1 ]"
else
OUTPUT="/dev/null"
LM_VERBOSE="[ 1 = 0 ]"
fi
if [ "$PARTITIONS" = "" ] ; then
PARTITIONS="auto /dev/mapper/*"
fi
# Expand shell wild cards immediately.
PARTITIONS=$( echo $PARTITIONS )
TERMINALS=$( echo $TERMINALS )
# Convert seconds to hdparm -S format
# Everything over 20 minutes is interpreted as 2 hours.
seconds_to_hdparm_S() {
if [ "$1" -eq 0 ] ; then
# disable.
echo 0
elif [ "$1" -gt 0 -a "$1" -lt 5 ] ; then
# 5 seconds minimum
echo 1
elif [ "$1" -le $((240*5)) ] ; then
# Values between 1 and 240 signify increments of 5 seconds
echo $(($1 / 5))
elif [ "$1" -lt $((30*60)) ] ; then
# Values between 20 and 30 minutes are rounded up to 30 minutes.
echo 241
elif [ "$1" -lt $((12*30*60)) ] ; then
# Values between 30 minutes and 6 hours (exclusive) yield values between
# 241 and 251, in 30-minute increments.
echo $(( 240 + ($1 / (30*60)) ))
else
# Larger values effectively indicate no timeout at all.
echo 0
fi
# Convert configured idle timeouts to hdparm -S format.
if [ "$LM_AC_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_AC_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$LM_BATT_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_BATT_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$NOLM_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $NOLM_HD_IDLE_TIMEOUT_SECONDS)
fi
# The main workhorse.
lmt_main_function ()
if [ "$1" = "status" ] ; then
# Display a status report.
log "STATUS" "Mounts:"
mount | sed "s/^/ /"
log "STATUS" " "
log "STATUS" "Drive power status:"
for disk in $HD; do
if [ -r $disk ]; then
hdparm -C $disk 2>/dev/null | sed "s/^/ /"
else
log "STATUS" " Cannot read $disk, permission denied - $0 needs to be run as root"
fi
done
log "STATUS" " "
log "STATUS" "(NOTE: drive settings affected by Laptop Mode cannot be retrieved.)"
log "STATUS" " "
log "STATUS" "Readahead states:"
cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do
# skip funny stuff
case "$FST" in
rootfs|unionfs|tmpfs|squashfs|sysfs|usbfs|proc|devpts) continue
esac
if [ -b $DEV ] ; then
if [ -r $DEV ] ; then
log "STATUS" " $DEV: $((`blockdev --getra $DEV` / 2)) kB"
else
log "STATUS" " Cannot read $DEV, permission denied - $0 needs to be run as root"
fi
fi
done
log "STATUS" " "
if [ -e /var/run/laptop-mode-tools/enabled ] ; then
log "STATUS" "Laptop Mode Tools is allowed to run: /var/run/laptop-mode-tools/enabled exists."
else
log "STATUS" "Laptop Mode Tools is NOT allowed to run: /var/run/laptop-mode-tools/enabled does not exist."
fi
log "STATUS" " "
STATFILES="/proc/sys/vm/laptop_mode /proc/apm /proc/pmu/info /proc/sys/vm/bdflush /proc/sys/vm/dirty_ratio /proc/sys/fs/xfs/age_buffer /proc/sys/fs/xfs/sync_interval /proc/sys/fs/xfs/lm_age_buffer /proc/sys/fs/xfs/lm_sync_interval /proc/sys/vm/pagebuf/lm_flush_age /proc/sys/fs/xfs/xfsbufd_centisecs /proc/sys/fs/xfs/xfssyncd_centisecs /proc/sys/vm/dirty_background_ratio /proc/sys/vm/dirty_expire_centisecs /proc/sys/fs/xfs/age_buffer/centisecs /proc/sys/vm/dirty_writeback_centisecs /sys/devices/system/cpu/*/cpufreq/cpuinfo_*_freq /sys/devices/system/cpu/*/cpufreq/scaling_governor /proc/acpi/button/lid/*/state /proc/acpi/ac_adapter/*/state /proc/acpi/battery/*/state /sys/class/power_supply/*/online /sys/class/power_supply/*/state"
for THISFILE in $STATFILES ; do
if [ -e "$THISFILE" ] ; then
log "STATUS" "$THISFILE:"
if [ -r "$THISFILE" ] ; then
cat "$THISFILE" | sed "s/^/ /"
else
log "STATUS" " Not accessible, permission denied - $0 needs to be run as root."
fi
log "STATUS" " "
fi
done
elif [ "$1" != "readconfig" -a "$1" != "defaults" ] ; then
KLEVEL="$(uname -r |
IFS='.-' read a b c
echo $a.$b
KMINOR="$(uname -r |
IFS='.-' read a b c d
# Strip any stuff from the end -- only the initial digits are part of the KMINOR.
echo $c | sed -e 's/$[[:digit:]]*$.*/\1/'
# Stop exporting everything -- what we do from here is private.
set +a
if [ "$1" = "--version" ] ; then
log "MSG" "Laptop Mode Tools $LMTVERSION"
exit 0
fi
if [ ! -e /proc/sys/vm/laptop_mode ] ; then
log "ERR" "Kernel does not have support for laptop mode. Please apply the laptop mode"
log "ERR" "patch or install a newer kernel."
exit 1
fi
if [ ! -w /proc/sys/vm/laptop_mode ] ; then
log "ERR" "You do not have enough privileges to enable laptop_mode."
exit 1
fi
INIT=0 # Display info in init script format?
FORCE=0 # Force reapplying the current state?
while [ "$1" != "" ] ; do
case "$1" in
init) INIT=1 ;;
force) FORCE=1 ;;
# Old options. We always do "auto" for any option now, but
# we still have to accept the options.
start) ;;
stop) ;;
auto) ;;
modules=*)
MODULES=$1
MODULES=${MODULES#"modules="}
devices=*)
DEVICES=$1
DEVICES=${DEVICES#"devices="}
*) log "ERR" "Unrecognized option $1."
exit 1 ;;
esac
shift
done
mkdir -p /var/run/laptop-mode-tools
# Used to display laptop mode state later on. This is the enabled/disabled
# state for laptop mode processing, it tells us nothing about whether laptop
# mode is actually _active_.
STATE=enabled
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -eq 0 -a "$ENABLE_LAPTOP_MODE_ON_AC" -eq 0 -a "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -eq 0 ] ; then
STATE=disabled
fi
# Determine the power state.
# First try /sys/class/power_supply/*
FOUND_SYS_CLASS_POWER_SUPPLY_AC=0
ON_AC=0
for POWER_SUPPLY in /sys/class/power_supply/* ; do
if [ -f $POWER_SUPPLY/type ] ; then
if [ "$(cat $POWER_SUPPLY/type)" = "Mains" ] ;then
log "VERBOSE" "Determining power state from $POWER_SUPPLY/online."
FOUND_SYS_CLASS_POWER_SUPPLY_AC=1
if [ "$(cat $POWER_SUPPLY/online)" = 1 ] ; then
ON_AC=1
fi
fi
fi
done
if [ $FOUND_SYS_CLASS_POWER_SUPPLY_AC = 1 ] ; then
# Already found it!
log "VERBOSE" "Not trying other options, already found a power supply."
elif [ -d /proc/acpi/ac_adapter ] ; then
log "VERBOSE" "Determining power state from /proc/acpi/ac_adapter."
ADAPTERS_FOUND=0
ON_AC=0
for ADAPTER in /proc/acpi/ac_adapter/* ; do
if [ -f $ADAPTER/state ] ; then
ADAPTERS_FOUND=1
STATUS=`awk '/^state: / { print $2 }' $ADAPTER/state`
if [ "$STATUS" = "on-line" ] ; then
ON_AC=1
fi
fi
done
if [ "$ADAPTERS_FOUND" -eq 0 ] ; then
ON_AC=1
fi
elif [ -f /proc/pmu/info ] ; then
log "VERBOSE" "Determining power state from /proc/pmu/info."
if ( grep -q "^AC Power.*0$" /proc/pmu/info ) ; then
log "VERBOSE" "/proc/pmu/info indicates absence of AC power."
ON_AC=0
else
# It is possible that there is no AC Power = 1 in the file,
# but we always assume AC power when we're not sure.
ON_AC=1
log "VERBOSE" "/proc/pmu/info indicates presence of AC power."
fi
elif [ -f /proc/apm ] ; then
log "VERBOSE" "Determining power state from /proc/apm."
read D1 D2 D3 APM_AC_STATE D0 </proc/apm
if [ "$APM_AC_STATE" = "0x00" ] ; then
ON_AC=0
else
ON_AC=1
fi
else
log "VERBOSE" "No /sys/class/power_supply, ACPI, APM or PMU power management information found -- assuming AC power is present."
ON_AC=1
fi
# Determine whether to activate or deactivate laptop mode.
ACTIVATE=0
if [ "$ON_AC" -eq 1 ] ; then
if [ "$ENABLE_LAPTOP_MODE_ON_AC" -ne 0 ] ; then
log "VERBOSE" "On AC power: Activating, because ENABLE_LAPTOP_MODE_ON_AC is set."
ACTIVATE=1
else
log "VERBOSE" "On AC power: Deactivating, because ENABLE_LAPTOP_MODE_ON_AC is not set."
ACTIVATE=0
fi
else
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -ne 0 ] ; then
log "VERBOSE" "On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set."
ACTIVATE=1
else
log "VERBOSE" "On battery power: Deactivating, because ENABLE_LAPTOP_MODE_ON_BATTERY is not set."
ACTIVATE=0
fi
fi
if [ "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -ne 0 -a "$ACTIVATE" -eq 0 ] ; then
if [ -x "`which hal-find-by-property`" ] ; then
HAL_LID_BUTTON=$(hal-find-by-property --key "button.type" --string "lid")
fi
if [ "$HAL_LID_BUTTON" != "" ] ; then
HAL_LID_BUTTON_STATE=$(hal-get-property --udi $(hal-find-by-property --key "button.type" --string "lid") --key "button.state.value")
if [ "$HAL_LID_BUTTON_STATE" = "true" ] ; then
log "VERBOSE" "Setting action to \"start\" because the lid is closed (says HAL)."
ACTIVATE=1
fi
elif [ -f /proc/acpi/button/lid/*/state ] ; then
if ( grep -q "closed" /proc/acpi/button/lid/*/state ) ; then
log "VERBOSE" 'Setting action to "start" because the lid is closed (says /proc/acpi/button/lid/*/state).'
ACTIVATE=1
fi
else
log "MSG" "Warning: ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED is set, but there is no file"
log "MSG" "/proc/acpi/button/lid/.../state, and hal information is not available either!"
fi
fi
# If the init script has not been run or has been run with the "stop"
# argument, then we should never start laptop mode.
if [ ! -f /var/run/laptop-mode-tools/enabled ] ; then
log "VERBOSE" "Laptop mode disabled because /var/run/laptop-mode-tools/enabled is missing."
STATE=disabled
fi
if [ "$ACTIVATE" -eq 1 -a -f /etc/default/laptop-mode ] ; then
. /etc/default/laptop-mode
if ! ( echo "$ENABLE_LAPTOP_MODE" |grep y ) ; then
log "VERBOSE" "Not starting laptop mode because it is disabled in /etc/default/laptop-mode."
STATE=disabled
fi
fi
if [ "$STATE" = "disabled" ] ; then
ACTIVATE=0
fi
# Check whether we are allowed to activate the data-loss-sensitive stuff.
# If the battery charge is too low, we want to disable this, but not the
# other power-saving stuff.
if [ "$ACTIVATE" -eq 0 ] ; then
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
elif [ "$ON_AC" = 1 ] ; then
log "VERBOSE" "On AC, not checking minimum battery charge."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
else
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
ENOUGH_CHARGE=0
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=0
# Weird way of checking that /sys/class/power_supply is not empty -- but it works.
if [ "$(echo /sys/class/power_supply/*)" != '/sys/class/power_supply/*' ] ; then
log "VERBOSE" "Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge."
for BATT in /sys/class/power_supply/* ; do
BATT_TYPE=$(cat $BATT/type)
log "VERBOSE" "$BATT is of type $BATT_TYPE."
if [ "$BATT_TYPE" != "Battery" ] ; then
log "VERBOSE" "Not of type \"Battery\", skipping."
else
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
log "VERBOSE" "Checking levels for $BATT."
PRESENT=$(cat $BATT/present)
log "VERBOSE" "Present: $PRESENT."
# Only do if the battery is present
if [ "$PRESENT" -eq 1 ] ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
IN_UAH=0
IN_UWH=0
if [ -f $BATT/charge_now ] ; then
REMAINING=$(cat $BATT/charge_now)
IN_UAH=1 # charge_* is in microAmpere-hours
elif [ -f $BATT/energy_now ] ; then
REMAINING=$(cat $BATT/energy_now)
IN_UWH=1 # energy_* is in microWatt-hours
else
REMAINING=0
fi
if [ -z "$REMAINING" -o "$REMAINING" -eq 0 ] ; then
log "VERBOSE" "Battery does not report remaining charge. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
if [ -f $BATT/charge_full_design ] ; then
CAPACITY=$(cat $BATT/charge_full_design)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full_design)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report design full charge, using non-design full charge."
if [ -f $BATT/charge_full ] ; then
CAPACITY=$(cat $BATT/charge_full)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report non-design full charge."
CAPACITY=0
fi
fi
log "VERBOSE" "Full capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# $BATT/alarm is the design_capacity_warning of a battery.
ALARM_LEVEL=$(cat $BATT/alarm)
if [ "$ALARM_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values
if [ "$IN_UAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_UWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh, uWh, mAh or uAh."
fi
else
log "VERBOSE" "Battery is not present."
fi
fi
done
elif [ "$(echo /proc/acpi/battery/*)" != '/proc/acpi/battery/*' ] ; then
log "VERBOSE" "Not on AC and we have batteries in /proc/acpi/battery -- checking minimum battery charge."
for BATT in /proc/acpi/battery/* ; do
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
BATT_STATE=$BATT/state
BATT_INFO=$BATT/info
log "VERBOSE" "Checking info and state for $BATT."
# Only do if the battery is present
if ( grep -q 'present:.*yes' $BATT_INFO ) ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
REMAINING=`grep "remaining capacity:" $BATT_STATE | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$REMAINING" ] ; then
log "VERBOSE" "Battery does not report remaining charte. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
CAPACITY=`grep "design capacity:" $BATT_INFO | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$CAPACITY" ] ; then
log "VERBOSE" "Battery does not report capacity. Perhaps it is not present?"
CAPACITY=0
fi
log "VERBOSE" "Design capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values.
# Determine the reporting unit.
IN_MAH=0
IN_MWH=0
if ( grep -q mWh $BATT_INFO ) ; then
IN_MWH=1
elif ( grep -q mAh $BATT_INFO ) ; then
IN_MAH=1
fi
if [ "$IN_MAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_MWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh or mAh."
fi
CAP_STATE=`sed -r 's/^capacity state:\s*(.*)\s*$/\1/;t;d' "$BATT_STATE"`
if [ "$DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "VERBOSE" "Battery is not present."
fi
done
else
ENOUGH_CHARGE=1
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
log "VERBOSE" "Not on AC and could not check battery state -- data loss sensitive features stay enabled and auto-hibernation will not work."
fi
if [ "$ENABLE_AUTO_HIBERNATION" -ne 0 -a "$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the auto-hibernation level."
log "VERBOSE" "Starting hibernation."
if [ -x $HIBERNATE_COMMAND ]; then
$HIBERNATE_COMMAND
elif [ -f /sys/power/state ]; then
grep -q disk /sys/power/state && echo disk > /sys/power/state
fi
# Don't continue -- if things are configured correctly, then we
# will be called on resume.
exit 0
fi
if [ "$ENOUGH_CHARGE" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the minimum level."
log "VERBOSE" "Deactivating data loss sensitive features."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
fi
fi
if [ "$INIT" -eq 0 ] ; then
log "MSG" "Laptop mode "
fi
# WAS_ACTIVE is used later on. If there is no /var/run/laptop-mode-tools/state, then
# we know that laptop mode wasn't active before.
WAS_ACTIVE=0
log "VERBOSE" "Checking if desired state is different from current state."
if [ -f /var/run/laptop-mode-tools/state ] ; then
read WAS_ACTIVE WAS_ON_AC WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS WAS_STATE < /var/run/laptop-mode-tools/state
if [ "$WAS_STATE" != "" ] ; then
if [ "$WAS_ACTIVE" -eq "$ACTIVATE" -a "$WAS_ON_AC" -eq "$ON_AC" -a "$WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -a "$WAS_STATE" = "$STATE" -a "$FORCE" -eq 0 ] ; then
log "MSG" "$STATE, "
if [ "$WAS_ACTIVE" -eq 1 ] ; then
log "MSG" "active [unchanged]"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "not active [unchanged]"
fi
exit 0
fi
fi
else
log "VERBOSE" "/var/run/laptop-mode-tools/state does not exist, no previous state."
fi
echo "$ACTIVATE $ON_AC $ACTIVATE_WITH_POSSIBLE_DATA_LOSS $STATE" > /var/run/laptop-mode-tools/state
if [ "$ACTIVATE" -eq 1 ] ; then
log "MSG" "$STATE, active"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "$STATE, not active"
fi
# Finally, call laptop-mode-tools modules. The modules can use the settings
# from the config files, but they may NOT assume the settings actually exist,
# as no defaults have been given for them.
# Note that the /usr/local/lib path is deprecated.
export FORCE STATE ON_AC ACTIVATE ACTIVATE_WITH_POSSIBLE_DATA_LOSS KLEVEL KMINOR WAS_ACTIVE LM_VERBOSE DEVICES
for SCRIPT in /usr/share/laptop-mode-tools/modules/* /usr/local/lib/laptop-mode-tools/modules/* /usr/local/share/laptop-mode-tools/modules/* /etc/laptop-mode/modules/* ; do
if [ -z "$MODULES" ] ; then
# If a module list has not been provided, execute all modules
EXECUTE_SCRIPT=1
else
# If a module list has been provided, execute only the listed
# modules.
EXECUTE_SCRIPT=0
for MODULE in $MODULES; do
# Attempt to remove the module name from the end of the
# full script path. If the module name matches the
# script, the name will be removed from the end of the
# full file path, leaving the path to the script. If
# there was not a match made, the module name would not
# be removed from the path, and $PATH_TO_SCRIPT would
# be the same as $SCRIPT.
PATH_TO_SCRIPT=${SCRIPT%%$MODULE}
# Execute the script if a match was found (module name
# was removed from the script path, making it shorter.
if [ $PATH_TO_SCRIPT != $SCRIPT ] ; then
EXECUTE_SCRIPT=1
fi
done
fi
if [ -x "$SCRIPT" -a $EXECUTE_SCRIPT -eq 1 ] ; then
log "VERBOSE" "Invoking module $SCRIPT."
SCRIPT_DEBUG=$SCRIPT; # We do this because in start-stop-programs module a $SCRIPT variable is used. That
# changes the whole meaning when passed to disableDebug ()
enableDebug $SCRIPT_DEBUG;
. $SCRIPT
disableDebug $SCRIPT_DEBUG;
else
log "VERBOSE" "Module $SCRIPT is not executable or is to be skipped."
fi
done
exit 0
# This fi closes the if for "readconfig". If I would have indented this one
# I would have indented the whole file. :)
fi
lmt_load_config
lock_retry ()
( $FLOCK -n -x -w 1 8 || exit 0;
i=10;
while [ $i -ge 1 ]
do
log "ERR" "Couldn't acquire lock. Retrying.... PID is $$\n"
$FLOCK -x -w 1 9 && lmt_main_function "$@" && break;
i=$(( $i - 1 ))
done
) 8>$LMT_REQ_LOCK
# Check and acquire locks and then exec.
( $FLOCK -n -x -w 1 8; ) 8>$LMT_REQ_LOCK
($FLOCK -n -x -w 1 9 && lmt_main_function "$@";) || lock_retry "$@"
) 9<>$LMT_INVOC_LOCK
# We do a special run of battery polling daemon here so that it does not get
# plagued by the lock. We need the polling daemon to be independent of any locks
if [ x$ENABLE_BATTERY_LEVEL_POLLING = x1 ] && [ x$BLACKLIST_IN_FLOCK = x1 ]; then
log "VERBOSE" "Battery level polling is enabled."
if [ x$ON_AC = x1 ] ; then
log "VERBOSE" "On AC, stopping the polling daemon."
# In AC mode we disable the polling daemon.
killall -q lm-polling-daemon
else
if ! pidof -x lm-polling-daemon ; then
log "VERBOSE" "On battery and there was no polling daemon yet, starting the polling daemon."
# If there is no polling daemon, we start one.
/usr/share/laptop-mode-tools/module-helpers/lm-polling-daemon < /dev/null > /dev/null 2> /dev/null &
fi
fi
else
log "VERBOSE" "Battery level polling is disabled."
fi
exit 0;
and here is the lines which archwiki mentions
case "$KLEVEL" in
"2.4" ) ;;
"2.6" ) ;;
log "ERR" "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
exit 1
esac

I had the problem but edited the line in /usr/sbin/laptop_mode and it worked. But thoes lines are not there anymore. I guess they changed it at the recent update of laptop-mode-tools.
Regarding your heat problem; is there any other thing you use to cut down power usage (from AUR maybe)? I use acpi_call from AUR had to edit lines there aswell, but it should be updated by now.

I am facing a Problem with reading images from database

Hi everybody..
any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code...
string connect = "datasource = localhost; port = 3306; username = root; password = ;";
MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
MySqlDataReader reader;
try
conn.Open(); // Opening Connection
reader = sda.ExecuteReader(); // Executing my Query..
while (reader.Read())
byte[] imgg = (byte[])(reader["Picture"]);
if (imgg == null)
pc1.Image = null;
else
MemoryStream mstream = new MemoryStream(imgg);
pc1.Image = System.Drawing.Image.FromStream(mstream);
It says Parameter not Valid... i am reading all the images from database

I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
to compare the imgg array data with the data before it was written to the database to see if the data matches. I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
byte count.
An image is binary data. The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data. The solution usually is to use UTF8 encoding instead of the default ascii encoding.
Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
jdweng

Problem with displaying images exported to PS

This is slightly different than the post about TIFF files not displaying properly.
In Aperture 1.2, when I exported an image to PS and did extensive work on it, and then saved back to Aperture, it would appear in Aperture just as it looked in PS when I saved it.
However, in 1.5, that does not happen. After I save the image, and then go back to Aperture, all of the changes I made in PS don't appear! However, if I again open the image in PS a second time, it will change to the PS version even before the image gets to PS (I can see it change right when I click "open with external editor").
Is this a difference with how 1.2 and 1.5 handle the files? I'm guessing it has something to do with image previews, because I chose not to have Aperture generate previews when I installed 1.5 due to the slow-down issues I saw reported here.
I'm starting to wonder what the point of upgrading to 1.5 was for me... if I can't take advantage of previews (accessing my Aperture library from other apps like Keynote, etc) and if the PS files I work on don't display properly, I'd rather go back to 1.2. This is a major problem in my workflow, since I often spend a lot of time working on images in PS, and I need to be able to see them that way when I return to Aperture.
I'm hoping there's some setting somewhere I can use to fix this. Is there?

David,
I really appreciate your offer to help. However, I have the problem with all images in my library in all projects, so I'm not sure how useful it would be for you to work with a single image I upload to a server.
I'm having the same problem on my MacBook too, though for some unknown reason there are certain projects on my MacBook that the process works fine with. I cannot tell any difference between those projects (that work) and those that don't.
What's even more strange... if I quit Aperture, and re-open it, and then go through the process (open a file in PS2, save, return to Aperture) - it works fine! But ONLY ONE TIME. If I try the same process again, on that same image, or any other image in my library, it will not work. It only works the FIRST TIME I do it after opening Aperture. I tested this several times and got the same result.
I am completely stumped here. I've tried generating previews for a project and turning all of the preview options on, but that doesn't solve the problem either.
Anyone out there have a clue what might be happening? This is more than a minor inconvenience... if my image management system can't display the image as it should appear, it's unusable.
Chris

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

I have a problem with vertical images burned on a cd

I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
John

Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
Charge Information:
Charge remaining (mAh):    4356
Fully charged:    Yes
Charging:    No
Full charge capacity (mAh):    4356
Health Information:
Cycle count:    813
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    0
Voltage (mV):    12571

I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick.

Problem with displaying image

Hello!
Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
So.. I have the interactive report
table test (
NAME NOT NULL VARCHAR2(4000)
ID NUMBER
BLOB_CONTENT BLOB
MIME_TYPE VARCHAR2(4000))
I need to display the column blob_content.
Thnks a lot.

1009316 wrote:
Hello! Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "1009316".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
So.. I have the interactive report
table test (
NAME NOT NULL VARCHAR2(4000)
ID NUMBER
BLOB_CONTENT BLOB
MIME_TYPE VARCHAR2(4000))
I need to display the column blob_content.This is described in the documentation: About BLOB Support in Forms and Reports and Display Image. There's an OBE tutorial that followed the introduction of declarative BLOB support in 3.1 as well.

Problem with scramb image MULTI DISTORTION COLOR

PROBLEM WITH IMAGE, SOMETIMES ITS DISTORTIONATED, AND SLOW

Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
Clinton

Problem with Atf, Image distortion

I got a problem with image Distortion
Here my atf in atf viewer: [IMG]http://i.imgur.com/d75aU.png[/IMG]
Heres my atf in FLashPlayer using 11.4.402.287: [IMG]http://i.imgur.com/H2vEV.png[/IMG]
notice the red pixel in the green part of the texture.
Im using png2atf with no parameters.

Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
Clinton

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Why do i have a problem with accessing images in adobe muse

why do i have a problem with accessing images in adobe muse ??????!!!!!
i need heeeeeelp ASAP
pleeeeease

I am on the begining stages with constructing the web so i do not have yet URL. The problem is i can not insert any image any way. Whether by fill a browser or by place image, i have the same issue. All the images with all image's format unable to be selected and it is turned off
I really need help plz
Is there any info i can supply that would help you figiring out the problem ??

I am getting problem with eps image coordite while rotating in AI Script

I am getting problem with eps image coordite while rotating in AI Script

"Problem"? Uh, *what* problem?
"AI Script"? There is no such thing.
I'm willing to interpret "cordite" as "coordinate" but you must provide more (a LOT more) information before anyone can volunteer to help you. You are not posting to an automated system that retrieves stock answers from a database. You are asking Real People to help you. (And this is a user-to-user forum, so it's all voluntary as well.)

Vanishing point – Marquee tool – problems with pasting images

Similar Messages

Maybe you are looking for