Varaint :Variant var_1 ofprogram /1BCDWB/DBVBAK is not thecurrent version?

Hi All,
I am trying to save the variant for vbak table which i have to use on daily basis for some reporting purpose in Production system.
But Next day it throws an error stating :
"Variant var_1 of program /1BCDWB/DBVBAK is not the current version"
and again i have to enter the value for the whole selection screen parameters.
Can You please suggest any solution???
Thanks in Advance,
Regards,
Deepak

Hello,
We are currently working on an upgrade of a SAP 4.6c system to ECC 6.0
Which version of rsvardoc must be used to rescue the variants? rsvardoc or rsvardoc_610?
The version of sap basis component in the upgraded enviroment is 700.
Many thanks in advance!
Regards,
Frenk Haak

Similar Messages

Variant "_$$audit-event-count" has not been declared in the current scope.

I migrated my bpel process manager from Version 2.1.2 [oc4j linux] to 10.1.2.0.0 [using jboss as application server].
The orabpel schema for 10.1.2.0.0 seems to be a bit different.
I installed the new schema and then dumped all the data from my previous schema. I also successfully deployed the 2.1.2 processes onto 10.1.2 version.
I can initiate a new instance of the process, however , the previously completed instances or not completed instances fail with the following error,
16:28:06,061 INFO [STDOUT] <2006-01-31 16:28:06,061> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "instance manager": Variant not found.
The variant "_$$audit-event-count" has not been declared in the current scope. All variants must be declared in the scope before being accessed.
Any advice is greatly appreciated. Thanks.

JScript is JavaScript.
Ah, now there's part of the confusion :)
If you're asking about a Windows Script Host (WSH) script, you don't have to declare stdin because it's part of the host.
Ok... So if I understand you correctly, I'm actually programming in J(ava)Script on windows for WSH. Simply trying to call ReadLine fails as well, as it is not defined according to the compiler.
Be specific: What are you trying to do? Tell what you want to do, not
how you think it needs to be done.
which brings me to my current issue: attempting to ReadLine() (in order to get the program to pause for a moment, from
this example)
I know I put up a pretty big wall of text back there, sorry about that.
EDIT: Well, I think I've learned
about J*script. It sounds like JScript and Javascript are more just versions of ECMAScript.

SE16 and Variant Not Current Version message

I am getting an error message when I try and execute SE16 using a variant. The message is DB634 and it says "Variant x of program y is not the current version". I have Functional asking me what is wrong and I can't tell them because I can't figure out how to debug it to see what it doesn't like or what it is even looking at. The message appears as soon as you click Variant x in your Drop List of Variants for the table. Any help is appreciated.

I think the problem is that the current selection screen of the table in SE16 has fewer or different fields for selection that the variant has. Go to Settings/Fields for selection and check all the fields that the variant needs. This should be the solution.

Chararacteristic 0CALQUARTER is available in version M but not in version D

Dear Sirs
I hope you're doing fine. While activating InfoCube 0PUR_C01 I get the following error:
RSAU709 : Chararacteristic 0CALQUARTER is available in version M but not in version D.
(Yes, the word characteristic is misspelled in the message text)
There is no more detailed information so I'm stuck..Please help.
With best regards
Manuel

Try executing the function module RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
Function module RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute

Provider not compatible version of Oracle client after upgrade 4.112.1.2

I had an ASP.NET 3.5 website running
on intranet small business server as production with:
OS Win2008 Standard 32-bit
Oracle Database 11g107 32-bit
Oracle DataAccess 2.111.60 32-bit
On a development laptop,
I upgraded the website to ASP.NET 4.0.
The development laptop had
OS Windows 7 32-bit
VS 2010
Oracle Database 11g201 32-bit
Oracle DataAccess 4.112.12
Application was running without errors.
On the production server,
I uninstalled Oracle Database 11g107,
to include removing Oracle home and install folders,
and in HKLM > Software > Oracle registry folder.
I installed Oracle Database 11g201
and installed the ODP.NET upgrade to 4.112.12.
(except for VS components).
In the website web.config,
I changed the referenced assembly to:
<assemblies>
<add assembly="Oracle.DataAccess, Version=4.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342" />
I changed IIS70 Application pool advanced settings to ASP.NET 4.0,
restarting application pool and website.
Rebooted system.
On starting the application when it accesses the Oracle connection,
I get the dreaded: Provider not compatible.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OracleException (0x80004005): The provider is not compatible with the version of Oracle client]
Oracle.DataAccess.Client.OracleInit.Initialize() +433
Oracle.DataAccess.Client.OracleConnection..cctor() +844
It is not the VB.NET Oracle connection code,
as it runs fine on the development laptop.
So I look into the GAC.
GACUTIL /l shows 2.111.60 is still in the .NET
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342
Oracle.DataAccess, Version=2.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.DataAccess, Version=2.112.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.DataAccess, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.DataAccess, Version=4.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Database.Extensions, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342
Oracle.Database.Extensions, Version=2.112.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Database.Extensions, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Database.Extensions, Version=4.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Web, Version=2.112.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Web, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.102.Oracle.DataAccess, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.111.Oracle.DataAccess, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.111.Oracle.Web, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.112.Oracle.DataAccess, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.112.Oracle.Web, Version=2.112.1.2, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Is there a command I need to run to remove the old 111.6.0 Oracle client references from GAC?
Eventhough Oracle ODP.NET installer put a policy to refer the older version to the new?

In
C:\Program Files\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0
and in
C:\Windows\Microsoft.NET\Framework\v4.0.30319
There is only SYSTEM.DATA.ORACLECLIENT
I suspect that we would not see Oracle.DataAccess.dll in these locations anyway.
++++++++
In
C:\Windows\assembly
There is:
Oracle.DataAccess 2.112.1.2
Oracle.Database.Extensions 2.112.1.2
Oracle.Web 2.112.1.2
This is the GAC for ASP.NET 2.0-3.5,
so this appears to be correct
++++++++
In
C:\Windows\Microsoft.NET\assembly\GAC_32
There is:
C:\Windows\Microsoft.NET\assembly\GAC_32\Oracle.DataAccess\v4.0_4.112.1.2__89b483f429c47342
C:\Windows\Microsoft.NET\assembly\GAC_32\Oracle.Database.Extensions\v4.0_4.112.1.2__89b483f429c47342
C:\Windows\Microsoft.NET\assembly\GAC_32\Oracle.Web\v4.0_4.112.1.2__89b483f429c47342
with the appropriate 4.112.1.2 dlls in these folders
This is the GAC for ASP.NET 4.0,
so this appears to be correct.
+++++++
In
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Config\Machine.config
Removed Oracle Providers references, I just need ODAC to update and insert data into schema data tables,
and do not use the ASP.NET Oracle Providers schema.
Should I need ASP.NET Oracle Providers schema, I can always add references in the application web.config.
<system.data>
<DbProviderFactories>
<add name="Microsoft SQL Server Compact Data Provider" invariant="System.Data.SqlServerCe.3.5" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"/></DbProviderFactories>
</system.data>
<membership>
<providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/>
</providers>
</membership>
<profile>
<providers>
<add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</providers>
</profile>
<roleManager>
<providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
<add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</providers>
</roleManager>
<siteMap>
<providers>
</providers>
</siteMap>
<webParts>
<personalization>
<providers>
</providers>
</personalization>
</webParts>
<healthMonitoring>
<providers>
</providers>
</healthMonitoring>
+++++++++++++
In
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Config\web.config
No Oracle references, and I would expect this as it is added in application level web.config
+++++++++++++
In
C:\Windows\Microsoft.NET\Framework\v4.0.30319\ASP.NETWebAdminFiles\web.config
No Oracle references, and I would expect this as it is added in application level web.config
+++++++++++++
In
D:\ORA\DB11G201\ODP.NET\bin\4
Oracle.DataAccess.dll 4.112.1.2
and in
D:\ORA\DB11G201\ASP.NET\bin\4
Oracle.Web.dll 4.112.1.2
+++++++++++++
So... why would I get provider not compatible version of Oracle Client...
there are no other versions of ODAC hanging around,
unless there are other locations I am not aware of.
The application works fine in development laptop.
The application works fine on production server when I use SYSTEM.DATA.ORACLECLIENT.
But we need to migrate away from SYSTEM.DATA.ORACLECLIENT according to Microsoft,
and I am sure Oracle would rather have me use Oracle.DataAccess client anyway.
++++++
I even tried a trick from another post to move what appears to be Oracle Instant Client components,
oci.dll, et al, from an installation into a new home of the Oracle 11g201 Cllent 32 along with Oracle.DataAccess.dll into the website BIN folder
and set references for Oracle.DataAccess.dll to LOCAL TRUE.
+++++++
So I remain stuck.

Why GWt suggest box is not working in the latest versions of Firefox ? It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

Why GWt suggest box is not working in the latest versions of Firefox ?
It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

jbren wrote:
I repeatedly have problems with playback on my STB's. Go thru all the motions, inhouse agent, fix multi room dvr problems. Unplug unit, unplug dvr, etc. etc. etc. The DVR'd show will play on the DVR but not on the STB's. What's up with that?
Sorry to hear the auto fix suggested early did not fix your problem. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

I need firefox 2 temporarily to use with a program that does not support version above 2.0 what do i do

I am trying to access information from a teaching site for securities exam and it will not let me access the programs because it does not support version above 2.0 and i have 3.0 or 3.5 please advise.

The page title is "Minimum System Requirements for FINRA E-Learning Courses", so I would assume that the page works with newer Firefox versions. All other requirements on that page looks pretty outdated with Flash 8 as minimum.
* http://www.finra.org/Industry/Education/OnlineLearning/E-learningCourses/P119435
On which page do you get that error? 
The login page in your More system details list doesn't give an error for me.
If you really need such an old version the use the portable version of Firefox 2.0.0.20. 
You can find the portable Firefox 2.0.0.20 version under "Mozilla Firefox, P.E. Legacy > Mozilla Firefox":
Win: http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox,%20P.E.%20Legacy/
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r32
# Java Plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Reduce file size in Adobe Reader X, not Pro version?

How do I reduce the size of my file in Adobe Reader X (not Pro version)?
It's a large file (+70 pages), basically a magazine in PDF.

Adobe Reader cannot edit or optimize PDF files.

How to check SQL Mamagement studio is installed or not (any version) programatically

How to check SQL Mamagement studio is installed or not (any version) programatically?
Secondly how to check if it is installed in other driver of a system(other than C drive) programatically.

Thanks visakh16,
Actually i do not want to read/write registry from SQL Server like you replied 'Accessing The Registry From SQL Server' link
and i dont want to check manually in registry.even i am aware of all registry path.. programmatically (by C# or VB.NET) i want to get that yes SSMS is installed of not even if it is installed in other drive(other than C Drive).. Beacause if it is installed
on the system , i want to launch that. i can launch, login for specific user/database, but i want to know, is it installed or not any version of SSMS befoe launch.This is my question... please review it..Thanks in advance..
Actually I tried this way..
Dim registryView As RegistryView = If(Environment.Is64BitOperatingSystem, registryView.Registry64, registryView.Registry32)
Using hklm As RegistryKey = RegistryKey.OpenBaseKey(RegistryHive.LocalMachine, registryView)
'Dim instanceKey As RegistryKey = hklm.OpenSubKey("SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL", False)
If instanceKey IsNot Nothing Then Return True
Return False
' For Each instanceName In instanceKey .GetValueNames()
' Next
'End If
End Using
Here i am checking for instances but i want to check only SQL Management Studio is installed or not..Thanks again

Could not find version number data in TF_BUILD_BUILDNUMBER

Hi,
I'm using the default build process template TfvcTemplate.12.xaml that came with TFS2013. I'm trying to call ApplyVersionToAssemblies.ps1 (from the Community TFS Build Extensions) in the pre-build script to version
assemblies. In lieu, I got this error below.
ApplyVersionToAssemblies.ps1 : Could not find version number data in TF_BUILD_BUILDNUMBER.
+ CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorExcep
tion
+ FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorExceptio
n,ApplyVersionToAssemblies.ps1
I've read that
TF_BUILD environment variables are automatically created, but I do not see them in the build machine. Do I need to manually create those variables?
TDN

Thank you so much EvgeniyBaryShev VI! I was able to see the available TF_BUILD environment variables. The PowerShell script was looking for a 0.0.0.0 pattern in the build number stores in TF_BUILD_BUILDNUMBER. Once I changed the build number format,
I was able to version my assemblies. Thanks again for the pointer!
TDN
Hi,
I am getting the same error of TF_BUILD_BUILDNUMBER.
Can you please help me out regarding the changes carried out by you in details.
Thank you.

Getting error u201CWorkflow definition 'WS04200009' not in version '0000'u201D

Hi all,
I have a requirement where I have to use/ enhance the standard HR workflow template WS04200009 for leave approval.
The problem is when I click on Workflow Builder in PFTC, its giving the following error :-
u201CWorkflow definition 'WS04200009' not in version '0000'u201D.
SAP has given details for this error like this:-
u201CWorkflow definition 'WS04200009' not in version '0000'
Message no. WD401
Diagnosis
The workflow definition with the ID WS04200009 in version 0000 could not be read from the database.
System Response
The call to the Workflow Builder had to be cancelled.
Procedure
Refer to your workflow system administrator.u201D
Secondly, I tried to copy this standard workflow template to a custom one.
But here also, its copying only the Workflow Container elements, workflow template is not coming.
Please guide me what can be the solution.
Regards
Navjot Singh.

Hi Navjot.
We faced the same issue, and need to apply the OSS note - 962488. (Recommended by SAP). After applying the note you need to execute the FM - SWD_WFD_REPLICATE_FROM_9999 input parameter as the workflow ID which is missing.
Hope this will be helpful for you. All the best.
- Mohan Vamsi

Liar Firefox: I have download and install Acrobat Reader 11.0.0 few minutes ago and Firefox still telling lies that Acrobat has in not current version.

Liar Firefox: I have download and install Acrobat Reader 11.0.0 few minutes ago and Firefox still telling lies that Acrobat has in not current version.

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

SAP NetWeaver CE 7.1 EHP1 does not support version 1.5 JCA?

Hi,
I've been following the documentation of SAP NetWeaver CE 7.1 EHP1 regarding creation of a version 1.5 resource adapter. When I finally got to "Add/Remove projects" in the server view to test my adapter, I get this error:
The server does not support version 1.5 of the J2EE Connector module specification
Is this true? Then why does the documentation explain how to do it?
Regards,
Johan

>
Johan Hoogenboezem wrote:
> Hi Yordan
> No it is this one: [http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm|http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm]
>
> I'm used to the tuturials spelling out the creation of the application project whereas point 3 (c) of "Creating a Connector Project"
> on that page does not make it clear that an application project is needed. Usually there is a separate heading for that, like
> "Creating the application project". It seems silly, now, but at the time that is how I interpreted it.
> Regards,
> Johan
Hi Johan,
I agree with you that this does not seem clear enough throughout the Resource Adapters documentation.
Generally speaking about the Developer Studio, there are two equivalent options to add your project (be it JCA, EJB, Web, JPA, etc.) to an EAR project:
While creating your project, you can specify that you want it to be added to an EAR project - either a new one or an existing one (you can create the new EAR project also in the meantime, while creating your JCA project). This is done using the "Add your project to an EAR" checkbox and the relevant dropdown list and button...
Create your project. Then create a new EAR project and specify which projects you want to be included in the EAR.
As I promised, we will improve that part of the documentation for the next release.
Thanks again, and best regards,
Yordan

WS14000075 Not in version

We have encountered a problem for the workflow without approval for PO WS14000075.
The Po's are created fine from shopping carts but if you chnage the PO it keeps failing on no workflow and when you look at the issue it say's the workflow is not in version.
I have tested in SWUD and all other parts of the workflow are fine except this one (including sub workflows).
We have tried SE37 SWD_WFD_REPLICATE_FROM_9999 which indeeed generates another active version but still it fails.
Has anyone go a clue
TM

Hi,
Is everything fine when the PO is created for the first time and only when you change it says this error?
If this is the issue, then go to SWETYPV and check the events for the business object BUS2201, your workflow no. 14000075.
I hope you will have only the event "SAVED" there.
Try to add "CHANGED" event for the same and try.
"CHANGEVERSION" is also a better option here.
Check for start condition FM if required.
Check for OSS note 790027 for making all the tasks as general task in 14000075 ( you have to find the tasks involved in this) and do SWU_OBUF. Check SWU3 for all the configs and jobs scheduled, if you change the tasks as general.
Best regards,
Sridhar.

How To Downgrade iMovie HD to NOT HD version, 6-5 or 4 without CD software?

I won my Power PC G4 on a computer giveaway in my college. They didn't provide any software. I upgrated to Mac OS X (I bought the software) I have the 10.4.9 version installed.
I had iMovie (don't know exactly which version) on my Mac, but I never had an original software CD.
I bought I Life '06 to be able to get the new updated versions of everything, including iMovie.
Unfortunatelly my computer does not support HD, so I was wondering if there is any way I could possibly DOWNGRADE from the iMovie HD to the previous NOT HD version, I don't know if it was iMovie 6, iMovie 5, or iMovie 6... But without having the original CD software.
Thank you for your help!
Power PC G4 Mac OS X (10.4.9) iLife '06
Power PC G4 Mac OS X (10.4.9) iLife '06

As Niel pointed out a few weeks ago, iMovie 3.0.3 - which was free - is still available for download from Apple here.
However, it's not as stable, or as useful, as later versions, and you do need to be careful with it: DO NOT EMPTY THE IMOVIE TRASH when you use this version, until you've completely finished your project and have backed it up, or burned it to a disc or sent it back to tape. Emptying the Trash can sometimes corrupt projects when you're using iMovie 3.0.3.
It should be able to co-exist with other versions of iMovie in your Applications folder, and it has its own 'Preference' file, so it shouldn't cause problems if you have both iM 3.0.3 and iMovie HD on the same Mac. But you may not be able to open, in iM 3.0.3, a project created with a later version.
I don't know, but there may be a QuickTime conflict, too, and you just might have to downgrade to an earlier version of QuickTime if you have problems with iM 3.0.3.

Varaint :Variant var_1 ofprogram /1BCDWB/DBVBAK is not thecurrent version?

Similar Messages

Maybe you are looking for