Variable data solution for full color variable inkjet printing

Looking for a variable data solution for full color variable inkjet printing.
Currently we use objective lune / Planet press and it is not keeping up with the times...any adobe products that might be suitable??
Thanks
Everett

Hi Everett,
I am an employee of Objectif Lune and just stumbled upon this post.
I am sorry to hear that you feel that way about PlanetPress.
As we highly value feedback from our users to continuously improve our products, I would like to know why you think PlanetPress is underperforming so I can pass it onto our team. Please email me at [email protected] if you would like to share your frustrations.
Thank-you and looking forward to hearing from you.
Cheers,
Nancy

Similar Messages

Need the latest drivers for a Deskjet 895Cse inkjet printer

I wanted to download and install the latest drivers for an HP Desket 895Cse inkjet printer but the only driver updates that are available on your website are for an HP Deskjet 895Cxi. I've never owned an HP Deskjet 895Cxi inkjet printer; only the HP Deskjet 895Cse inkjet printer. Do these two models use the same set of drivers or does your website no longer offer updated drivers for an HP Deskjet 895Cse inkjet printer?
I'm planning to address various sized envelopes for Christmas cards which I have done in the past using my older model HP Deskjet 895Cse inkjet printer because my current HP printer; an HP C5280 Photosmart All In One inkjet printer will not allow me to print on odd sized greeting card envelopes; only standard sized business envelopes like a No. 10, No. 11 and a No. 12.
Last night I ordered new inkjet cartridges for my Deskjet 895Cse inkjet printer; a #23 color cartridge and a #45 black cartridge; both cartridges set me back about $70.00 after applying discounts and using a promo coupon code from HP. I spoke to someone in tech support overseas yesterday who advised me to download the most up to date drivers for my Deskjet 895Cse inkjet printer before I install the new cartridges and begin to address my Christmas card envelopes; about 75 envelopes; front and back.
If there are no new drivers available for my Deskjet 895Cse inkjet printer should I plan to return my new HP inkjet cartridges once I receive them because if my Deskjet 895Cse inkjet printer will not allow me to print on anything unless I install the latest set of drivers for my Desket 895Cse inkjet printer and if there are no new drivers currently available on your website I might as well return my newly ordered cartidges as soon as I receive them by Fedex from HP and get my $70.00 back. Feedback on this would certainly be appreciated.
Stevoreno
12/10/13

Why doesn't the website list the latest drivers for an 895Cse? Was the Deskjet 895Cse inkjet printer released for sale to the public before the Deskjet 895Cxi inkjet printer or visa versa? Basically what's the difference between the 2 models? Finally if I were to install my new cartridges which haven't arrived yet and choose not to install the drivers for the 895Cxi model will my 895Cse printer still work and be able to print?
Stevoreno
12/10/13

Date Format for the input Variable

Hi all,
I got an issue with Date format we enter in the input variable screen for the BEx Analyzer.
We have given a format of MM/DD/YYYY. But when the users accessed the report, it is not taking the format of the variable i.e MM/DD/YYYY but it is taking the format of the users system.
If the user's system format is DD/MM/YYYY, it is accepting the input inthe same format only.
Why this strange behaviour?
My questions are
Is the input for BEx system specific? or variable specific?
Rgrds
Kumar

Hi,
I think it is user specific... you can maintain the date format for user ....
Go to SU01 transaction or.. Go to SYSTEM -> User Profile -> Own data
Here in defaults tab you can see the date formet for user...
Hope this helps...
Thanks,
Vikrant Mahajan

Automatic change of data selection for full update

Hi,
I have created datasource for full update and load data mannulay on weekly basis by date selection in infopackage.
If I want to schedule the job on weekly basis, is there any way to change the date selection in infopackage for each data load.
i.e. if the previous range was 1st to 7th for full update, then next it should become 8th to 14th.
Regards,
Pravin.

Hi,
Go to that infopackage - dataselection tab - calday field - there will you will type (near to TO value ) - there enter 6 for abap routine and give the name..
Eg :
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'XXXXXX'. " XXX- techname
              l_idx = sy-tabix.
data : date_low like sy-datum,
        date_high like sy-datum.
        date_high = sy-datum - 1.
        date_low = sy-datum - 5.
        l_t_range-low = date_low.
        l_t_range-high = date_high.
        l_t_range-sign = 'I'.
        l_t_range-option = 'BT'.
          modify l_t_range index l_idx.
          p_subrc = 0.
Here in the above eg , we are loading daily data from the interval of last 5 days.. ( from 03.02 to 07.02.08)
Hope you have got an idea..
Regards,
Siva.

Windows 8 driver solution for HP Color LaserJet 3550

I have successfully installed on my "windows 8 32bit" Hp color laserjet 3550 printer with a USB cable.
(the guides seemed possible only with win8 64bit)
Follow these steps:
1) in Hp website support driver, select drivers for windows XP
2) download clj3550prnsyswin-us.exe (HP color LaserJet 3550 printing system 2.0 April 15, 2005 86.4 MB)
3) run the setup you unzip the files in c: \ clj3550 printing systems
4) Connect the USB printer
5) in the control panel, printer management, add a new local printer
6) aggingere drivers from disk, select driver in c: \ clj3550 printing systems
7) At this point the printer is created (hp color laserjet 3550), but it does not work, does not print any page
8) in device manager right click and update drivers automatically, he searches for the driver online, update them and concludes the setup
9) now in the control panel, printer management, you will find another printer, hp color laserjet 3550 copy. This one print very well.
I hope it is useful
Best Regards Anubi

Anubi80,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Does white need to be transparent for one color t-shirt printing?

Hi,
I made one color (black and white) graphic as an Illustrator file for a guy who is printing it with one color on t-shirts. Some of the white areas are formed from white objects on top of black objects and some are transparent areas like the background that shows when the Show Transparency Grid is selected from the View menu .
The guy told me his printer said that there are white objects in the graphic that need to be transparent.
I don’t have any other information. I don’t know what kind of printing, printer, and t-shirts are used. Initially the guy told me not to worry about that, he will prepare the graphic for print but now he is asking me to turn the whites to transparent. Given the situation, I’m suspecting if this is the right approach.
I would like to learn the right way of doing this and I will greatly appreciate any advice, and input.

If you make a compound path...the artwork will be OK.
That cannot be assumed as true without actually seeing how the artwork is built. In any of these situations, a normal even-odd winding will cause unwanted black reversals:
Difference regions between any white and black fills (for example a white path only partially overlapping a black path).
Intersection regions between two or more white fills.
Intersection regions between two or more black fills.
Without knowing the artwork stack, the most likely "one-size-fits-all" solution would be the Merge Pathfinder. But even that assumes that all paths are filled, unstroked paths; no Brushes, etc.
But as has already been stated, when printing separations or composite, white means "no ink" unless the white is a spot color Swatch. The strange-sounding request from the printer may also be due to white objects being accidently set to overprint.
The surest thing for a beginner not understanding any of the above would be to just rasterize the whole thing to 1-bit at a moderate resolution, assuming it is all line art and is drawn at 100%.
JET

Solved! Windows 7 driver solution for HP Color LaserJet 3550

I had success getting the HP Color LaserJet 3550n (the 3550 family ) printer to install in Win7. That printer was the only thing that did not fire up with Win7. In the Devices and Printers window, I tried troubleshooting, but it was a problem with the DOT4USB drivers. Similarly to others, I was successful by using the following course of action:
1) Went to HP and downloaded the Vista 32-bit drivers for the 3550, unpacking them at C:\HP CLJ3550\ as suggested by the driver file.
2) In Devices & Printers, did <Right-Click> <HP 3550> <Properties> <Hardware tab>
3) I selected the first "Device Function" <DOT4USB> then did <Properties> <Change Settings> <Driver tab> <Uninstall>.
4) I then selected the second and third Function (which were <HP Color LaserJet 3550> and <IEEE 1284.4 compatible printer> and did the the <Properties> ... <Uninstall> for each.
5) I disconnected the USB to the printer, went back to Devices & Printers, and selected <Add a Printer>.
6) I selected <Add a local printer> <Use existing port DOT4_001> <Next> <Have Disk> <C:\HP CLJ3550> <OK> and installed the printer.
7) It would not work unless I "let" Windows make it the Default Printer
8) After it was finished, I did <Right-Click> on my preferred printer and selected <Set as default printer>, and everything worked.
This question was solved.
View Solution.

I want to thank you for the solution. You saved me the expense of having to purchase a new computer. I used the 64 bit 2003 version and it works just fine. The people at HP were not very cooperative at all. When I called, the lady who answered the phone asked if I was from the United States or Canada. When I stated the United States she had a big sigh
of disgust. When I explained my problem that I was having with the 3550 Laser jet and HP not having the Window 7 drivers, and that the printer was non functional, she stated that I should have researched whether or not my printer was compatible with a new operating system before purchasing it. I asked her if HP would have a compatible driver soon as I did not want to have to purchase a new printer. Then she stated that my printer was old (I bought it in 2005) and what did I expect,t as if the printer not working was my fault. I told them about your solution to this problem and if they could help me through the step but she did not cooperate .Even if I had to pay the $39 fee to the tech dept for their assistance it was worth it saving time. HP service in my opinion is very poor and will lean toward a competitors product if I am faced with a choice. Thank you again.

What is the best big data solution for interactive queries of rows with up?

0 down vote favorite
We have a simple table such as follows:
| Name | Attribute1 | Attribute2 | Attribute3 | ... | Attribute200 |
| Name1 | Value1 | Value2 | null | ... | Value3 |
| Name2 | null | Value4 | null | ... | Value5 |
| Name3 | Value6 | null | Value7 | ... | null |
| ... |
But there could be up to hundreds of millions of rows/names. The data will be populated every hour or so.
The goal is to get results for interactive queries on the data within a couple of seconds.
Most queries look like:
select count(*) from table
where Attribute1 = Value1 and Attribute3 = Value3 and Attribute113 = Value113;
The where clause contains arbitrary number of attribute name-value pairs.
I'm new in big data and wondering what the best option is in terms of data store (MySQL, HBase, Cassandra, etc) and processing engine (Hadoop, Drill, Storm, etc) for interactive queries like above.

Hi,
As always, the correct answer is "it depends".
- Will there be more reads (queries) or writes (INSERTs)?
- Will there be any UPDATEs?
- Does the use case require any of the ACID guarantees, or would "eventual consistency" be fine?
At first glance, Hadoop (HDFS + MapReduce) doesn't look like a viable option, since you require "interactive queries". Also, if you require any level of ACID guarantees or UPDATE capabilities the best (and arguably only) solution is a RDBMS. Also, keep in mind that Millions of rows is pocket change for modern RDBMSs on average hardware.
On the other hand, if there'll be a lot more queries than inserts, VERY few or no updates at all, and eventual consistency will not be a problem, I'd probably recommend you to test a Key-Value store (such as Oracle NoSQL Database). The idea would be to use (AttributeX,ValueY) as the Key, and a Sorted List of Names that have ValueY for their AttributeX. This way you only do as many reads as attributes you have in the WHERE clause, and then compute the intersection (very easy and fast with sorted lists).
Also, I'd do this computation manually. SQL may be comfortable, but I don't think It's Big Data ready yet (unless you chose the RDBMS way, of course).
I hope it helped,
Joan
Edited by: JPuig on Apr 23, 2013 1:45 AM

Production ready solution for full screen?

I am creating a full screen application (simulation/game). Full screen is part of the requirements.
So I set:
primaryStage.setFullScreen(true);
and then add the scene to the stage:
primaryStage.setScene(aScene);
When I run the application I immediately get the message "Press escape to exit full screen mode" on top of the screen (covering the company logo is usually not a good idea). The message fades after a bit.. but then I go to the next scene
primaryStage.setScene(aNewScene);
and the message "Press escape to exit full screen mode" covers the screen again (and I assume it will do this every time I change scenes). This will obviously not fly. Any idea how I get rid of these messages once and for good. Thanks

Even though they look like swing panels from an API perspective, they are implemented using a scene graph (much like traditional 3D programming). Each 'pane' is just a node in the tree with child nodes.
BorderPane.setCenter is the right approach for you. Or perhaps even slightly better is a StackPane at the root which will let you do layers. Add a BorderPane as the first child of this and then use setCenter on this to change your game display. Then add another pane to the StackPane to contain your HUD (eg score, buttons, etc). Use animations to do some cool HUD entry/exits for bonus points.
JFX Flow would probably suit your needs too. Just customize the browser class to not look like a browser. That way you'd get some of the other features too like page transitions, dialogs, blocking while loading, etc, or have a look at the jfx flow source code (particularly the Browser class) for bits and pieces of what you need.
http://www.zenjava.com/jfx-flow/
check out the showcase.

TCP: Incomplete TCP data segment for full reassembly, due to missing continuation message.

Once a day we're hitting this error. What does it mean, any idea why?
We have following situation:
ServerA is calling a standard web service (http post with soap request) to ServerB. This same web service gets called many times a day. But only once a day I get error in the subject! (SOAP message is truncated as a result.) I log the error and then when
I reissue the same request later (calling the same web service again) everything is fine !?!?!
I'm capturing traffic on ServerA (the one that's calling).
Any idea? Thank you!

It's hard to say without looking at the trace. Both the receiver/sender will resend messages if they are lost over a TCP connection. The result in a trace will show the TCP message, a small delay, then a retransmit. But in the end, the result
should be invisible to the HTTP/SOAP layer above it. So I feel that there is something else going on, but it's hard to say.
I believe you are also saying that your application is getting an error at the same time you see this problem in the trace, is that correct?
If this is true, I would look at the SOAP request/response in the trace and compare that to what you are sending. Are they the same? Does it look incomplete?
It's difficult to help without a trace to example. If you want to share one with me via email, feel free to contact me from the blog (http://blogs.technet.com), and then we can start an email thread.
Paul

Win 7 (64 bit) Driver for my Color LaserJet 2550n Printer

A specific driver for my HP Color LaserJet 2550n is not listed in the Win 7 driver list. I see drivers for 2500 PCL 5, 2500 PS, 2550 PS, and 2600n. ( just updated the Windows driver list.) I've been using the HP Color LaserJet 2550 PS driver, but have problems printing that I never had with Win XP. Which ddriver is the correct one for my 2550n printer?. Thanks.

Hi,
Please get it directly from the following link:
http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need a driver that will work for HP Color Jet Laser Printer with OS 10.7

How can I download a drive, and fom where, that will allow me to print from a Mac Book Air with OS 10.7 from an HP 1600 LASER COLOR JET. Thank you

Hey Ravenmark,
This may or may not work but you can try using the Mac OSX drivers for the 1500 series and see if you get any good results.
They're listed here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=239140&prodTypeId=18972&prodSeriesId=239135&swLang=8&taskId=135&swEn vOID=219
I work for HP.

Driver for Dell A920 scanner/inkjet printer

Hello. I've inherited a cheap and cheerful Dell printer/scanner (model A920). I don't believe Dell ever made a driver for the Mac... what is the best third party or open source driver to get this printer hooked up to my Powerbook G4 (running 10.4.11) or our brand new Intel MacBook?
Thanks,
James

If you have a PC that you could hook the printer to, you can use this workaround to share it:
http://iharder.sourceforge.net/current/macosx/winmacprinter/

Date Picker for Query Variable

Hello,
I have a query, which has a input variable as date. For the Query Variables when i drag and create an input form, i have the field as input field. How do i change this field to a date picker drop down...I do not get any option to make it as a date picker/calendar...
REgards,
Vikram

Hello Vikram,
If I understand correctly, the field type is String, but it represents a Date. You want to be able to edit it as such.
1. In the input Form open the Define Data dialog (using the Right Click context menu) and add a field of type Date (letu2019s say its name is u201CDATE1u201D).
2. On the link between the input Form and the Service Open the Map Data dialog using Right Click => Map Datau2026
3. Find the relevant Field Assign in the table. Here you want to get the Date value converted into a String. From the Assign Value drop down you can choose Define Expression to open the Dynamic Expression Editor (you can skip this and write the value yourself in the Assign Value input if you know what to write).
4. On the right hand side you have model elements and functions to create an expression. You can use the function DSTR(@DATE,[format]) u2013 where parameter 1 is the Date field and parameter 2 is the Format (optional). The function returns a String representation of a given Date.
5. Your expression can look like this for example: =DSTR(@DATE1,"dd/mm/yyyy"), assuming the name of the new Date field in the Form is DATE1.
6. You can remove the old Text field from the Input Form if you donu2019t need it u2013 using the Define Data dialog.
Hope this helps,
Udi

Variable data binding in Excel

Hi guys,
how can I use data binding in Excel planning solutions? In WAD data binding works perfect getting values from a userexit variable to an input ready user variable.
How to do the same in Excel?
We have the problem that the values of our user exit variable may change between two executions of the planning sequence. Nevertheless the planning sequence works with cached values of the variable.
Regards
Stefan

Thanks for the advice, but it is not quite the thing I am looking for.
I would like to use the same planning sequence in different scenarios , so the filter of the seqence contains input ready variables, which are used without variable screen. In WAD I can use userxit variables as source for input ready variables. How to do the same in Excel? Especially variables with multi single values.
Regards STefan

Variable data solution for full color variable inkjet printing

Similar Messages

Maybe you are looking for