Variable Designer (custom dimension and members selection greyed out)

Dear All,
I want to crate a variable for business rule using Variable designer for a specific plan type (for example plan1)
Entered the following
Name = Test
Type = Member
Value = Dimension (when i click to open the dimensions it show nothing) !!!
Previously it was working fine, my functional mate made some changes it dimension members of account like ( Account type , Data storage etc)
Your valuable suggestions are needed to solve the issue,
Regards

I wrote something on making a custom dimension variable in Global, maybe you can try doing that.
Oracle - Hyperion Labs......: Variable limitations in Calc Manager 1
Regards
Celvin
http://www.orahyplabs.com

Similar Messages

Load dimensions and members in Planning application via outline load

it is a classic planning application, after I load dimensions and members into classic Planning application, I can't see new members I added in csv file.
How could I confirm whether it was successfully loaded.
This is the log. Please refer to it.
Successfully logged into "予算応用" application, Release 11.121, Adapter Interface Version 5, Workforce supported and enabled, CapEx supported and enabled, CSS Version 3
"Account" dimension properties and information:
Account, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Valid For Consolidations, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Account Type, Time Balance, Skip Value, Exchange Rate Type, Variance Reporting, Source Plan Type, Plan Type (PL), Aggregation (PL), Plan Type (BS), Aggregation (BS), Plan Type (Plan3), Aggregation (Plan3), Plan Type (Wrkforce), Aggregation (Wrkforce), Plan Type (Capex), Aggregation (Capex)
UDA's bound to "Account" dimension: HSP_NOLINK
"Period" dimension properties and information:
Period, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Type, Start Period, End Period, Aggregation (PL), Aggregation (BS), Aggregation (Plan3), Aggregation (Wrkforce), Aggregation (Capex)
No UDA's defined on "Period"
"Year" dimension properties and information:
Year, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation
No UDA's defined on "Year"
"Scenario" dimension properties and information:
Scenario, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Valid For Consolidations, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Start Year, Start Period, End Year, End Period, Exchange Table, Include BegBal, Process Management Enabled, Aggregation (PL), Aggregation (BS), Aggregation (Plan3), Aggregation (Wrkforce), Aggregation (Capex)
UDA's bound to "Scenario" dimension: ACTUAL
"Version" dimension properties and information:
Version, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Version Type, Process Management Enabled, Aggregation (PL), Aggregation (BS), Aggregation (Plan3), Aggregation (Wrkforce), Aggregation (Capex)
No UDA's defined on "Version"
"Currency" dimension properties and information:
Currency, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Symbol, Scale, Triangulation Currency, Reporting Currency, Thousands Separator, Decimal Separator, Negative Style, Negative Color
No UDA's defined on "Currency"
"Entity" dimension properties and information:
Entity, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Valid For Consolidations, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Base Currency, Plan Type (PL), Aggregation (PL), Plan Type (BS), Aggregation (BS), Plan Type (Plan3), Aggregation (Plan3), Plan Type (Wrkforce), Aggregation (Wrkforce), Plan Type (Capex), Aggregation (Capex), NumericAttrib
No UDA's defined on "Entity"
"NumericAttrib" attribute dimension (on base dimension "Entity"). NO attributes defined on the "NumericAttrib" dimension.
NumericAttrib, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Operation
"Employee" dimension properties and information:
Employee, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Valid For Consolidations, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Aggregation (Wrkforce)
No UDA's defined on "Employee"
"Line Item" dimension properties and information:
Line Item, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Valid For Consolidations, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Aggregation (Capex)
No UDA's defined on "Line Item"
"Asset Class" dimension properties and information:
Asset Class, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Valid For Consolidations, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Operation, Aggregation (Capex)
No UDA's defined on "Asset Class"
Exchange Rates properties:
Table, Description, To Currency, From Currency, Operation, Method, Historical, Beg Balance, Year, Period, Average, Ending
UDA properties:
Dimension, UDA, Operation
Smartlist properties:
SmartList Name, Operation, Label, Display Order, Missing Label, Use Form Missing Label, Entry ID, Entry Name, Entry Label
No Planning Unit Hierarchies are defined in this application.
Translation input file fields:
Value, Driver Member, Point-of-View, Data Load Cube Name
[Thu Oct 27 18:16:18 JST 2011]Successfully located and opened input file "C:\TEMP\PLNentityバージョンのエクスポート.csv".
[Thu Oct 27 18:16:18 JST 2011]Input file being read with UTF-8 encoding.
[Thu Oct 27 18:16:18 JST 2011]Detected a UTF-8 BOM marker in input file "C:\TEMP\PLNentityバージョンのエクスポート.csv".
[Thu Oct 27 18:16:18 JST 2011]Header record fields: Entity, Parent, Alias: Default, Alias: FromDepartment, Alias: ToDepartment, Valid For Consolidations, Data Storage, Two Pass Calculation, Description, Formula, UDA, Smart List, Data Type, Base Currency, Plan Type (PL), Aggregation (PL), Plan Type (BS), Aggregation (BS), Plan Type (Plan3), Aggregation (Plan3), Plan Type (Wrkforce), Aggregation (Wrkforce), Plan Type (Capex), Aggregation (Capex)
[Thu Oct 27 18:16:18 JST 2011]Located and using "Entity" dimension for loading data in "予算応用" application.
[Thu Oct 27 18:16:18 JST 2011]Load dimension "Entity" has been unlocked successfully.
[Thu Oct 27 18:16:18 JST 2011]A cube refresh operation will not be performed.
[Thu Oct 27 18:16:18 JST 2011]Create security filters operation will not be performed.
[Thu Oct 27 18:16:18 JST 2011]Examine the Essbase log files for status if Essbase data was loaded.
[Thu Oct 27 18:16:18 JST 2011]Planning Outline load process finished (with no data load as specified (/N)). 9 data records were read, 9 data records were processed, 9 were accepted, 0 were rejected.

Thank you for your reply.
With your help, I can verify it easier rather than creating dataform to verify it.
I have resolved the question now, the root cause is I had used the wrong parameter, shouldn't add '/N' in the command. for /N is a dry run to check whether there are error in CSV file, it won't perform metadata load.
If no error occured, run the command without /N, then the metadata load will be performed.
I refer to this artical,
http://john-goodwin.blogspot.com/2008/08/time-to-look-in-bin.html
Best regards,
Samantha
Edited by: Samantha on 2011-10-31 下午4:39

How to load dimensions and members in Planning application

Hello Everyone,
I am trying to load dimensions and members in planning. I know that loading dimension is not recommended through Essbase but I wanted to give it a try. I tried to load the dimensions through rule files but it threw an error that the "members do not exist in database." Is that an indication that data cant be loaded at all in planning application through Essbase.
Thanks is advance for all the replies !!

If this is a planning application, you need to load metadata/dimension to planning first. You cannot load metadata directly to Essbase as it will be overwritten when you refresh planning.
You should read documentation to understanding how planning works. Planning is an interface which sits on top on Essbase. However, Planning metadata is stored in database tables and it is synch'd with Essbase through Hyperion Planning refresh.
In order to load metadata to planning, I would suggest to log on to planning and try to build dimensions manually first to know how planning interacts with Essbase. You could load metadata into planning through:
1. Manually
2. ODI: You will need to reverse planning application and then use it to load metadata
3. Outline load utility on planning server.
Remember, all Planning maintenance is done through planning interface and not through Essbase.

What is the best Mac app for designing custom brochures and business cards?

What is the best Mac app for designing custom brochures and business cards? And Why? I like to use my creativity. I have Print Shop2 right now, less formatted templates and more options would be better. Any suggestions. Tell me why you like it. My background is MS windows XP Publisher 2003. Thank you for your help!
Nightowl7

What is the best Mac app for designing custom brochures and business cards? And Why? I like to use my creativity. I have Print Shop2 right now, less formatted templates and more options would be better. Any suggestions. Tell me why you like it. My background is MS windows XP Publisher 2003. Thank you for your help!
Nightowl7

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
Connection Bus : USB                                                               Write Status : Read/Write
Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply!

Itunes showing all data as other and sync button greyed out

Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?

Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes.

ICloud and Twitter are greyed out in Systems. Can't access them.

iPod Touch Model PC544LL Version 5.1 30GB
Why are my iCloud and Twitter icons greyed out in Systems?
Found the answer.

A little more info is needed. How are you trying to access iCloud (via contacts, calendar, mail app)? Also check Settings>Restrictions. Not sure if turning it on would cause this, but check to be sure its not turned on.

I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

My apologies. Your post jogged my little grey cells to the point that I did a few experiments. In essence, you are right. My plug-ins do not work with 8-bit greyscale images. I like to deliberately shoot B&W and have a Wratten #12 minus-blue filter on the lens--as I used to do with film cameras.
The raw files ( Fujifilm's .RAF) were converted in Adobe CR by checking off "Convert to Grayscale" under the fourth tab. In the future, I will do the B&W conversion in Photoshop with either Nik or Topaz plug-ins.
Thanks for your input!

Firefox 8 and 9beta. Back and Forward buttons greyed out. Right click menu also has forward and back greyed out. Updated all plugins, then disabled all plugins and extensions and started in safe mode. No change.

My forward and back buttons are greyed out after update to Firefox 8. Tried to move to 9 beta, but same behavior. Back and Forward also greyed out in right click menu.
Attempted to fix by updating all plugins and extensions, then disabled all plugins and extensions, and then tried to start in safe mode. Nothing worked.

You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

Forward and back buttons greyed out, no forward or back available in right click menu either

After upgrading to the latest FF14 the forward and back buttons and menu versions of forward and back are greyed out.
Tried the sqllite check and it says all my databases are fine. Tried safe mode, same thing. Tried a new profile, same thing.
Any other suggestions?

You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

Unstable harddisk won't go in dock - and icon is "greyed out" in Finder

Some time ago, I couldn't find my system disk in the dock in Finder (the thing to the left when you open a Finder window). I thought I'd accidently thrown it out, so I did a Sherlock search for it. I found the disc, but its icon was weirdly "greyed out", as if to tell me the disc was "deactivated" or so - and it wouldn't go into the disk dock.
I tried reformatting the disc completely, which worked for 1 day or so, and then the problem was there again. So I thought the harddisk was effed and bought a new one, formatted it and installed OS+programs yet again. After 2 days, the disk disappeared again and was, again, "greyed out" when I searched for it.
I've had the same setup with regards to software, RAM and HD's for almost a year prior to this happening, so it's most likely not a problem caused by new equipment going crazy.
Anyone see this before?

Dave,
Try doing a SMC reset and if that doesn't help try starting in Safe Mode.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Trying to upgrade software for my iphone 4 and it is greyed out

i have an iphone 4 and have not been able to upgrade my software to either version 6 or 7. I am still runing version 5. When i go to sofware update to upgrade my software, my "download and install" is greyed out and does not allow me to update. Any suggestions? Thanks

The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.

LOV selection greyed out

I have a LOV set up on a form - but the description returned and displayed is greyed out, which makes it almost invisible.
It seems to be an Internet Explorer issue as firefox displays ok.
Is there a way of making the font bold for the returned value from a LOV?
I am using the 24. cloudy theme if that makes a difference.
Cheers,

Depends.. What version of APEX are you using? Version of IE? More info you provide, the better help others can provide..
Thank you,
Tony Miller
Ruckersville, VA

I have purchased & downloaded Adobe 6 (standalone,not CC} Panorama and HDR are greyed out and not useable? Appreciate any words of wisdom

i have purchased & downloaded Adobe 6 (standalone,not CC} Panorama and HDR are greyed out and not useable? Appreciate any words of wisdom

Your parental controls are likely restricting you: Settings>General>Restrictions, then toggle to "ALL" on shows/movies etc

Parent child hierhecy in customer dimension how can select parent gogrphey when we select parent id in MDX

i have customer dimension
CustomerId
CustomerName
CustomerParentID
State
Region
my requiremnt is when i select parent id automatically my parent state select using MDX query.

Hi Manishcal,
According to your description, you want to get parent state based on the parent id, right?
We can use the parent function and member properties function to retrival the dimension attribute. I have tested it on my local environment, the sample query below is for you reference.
with member [measures].[Parent]
as
[Employee].[Employees].currentmember.parent.name
member [measures].[ParentHireDate]
as
[Employee].[Employees].currentmember.parent.properties("Hire Date")
select {[measures].[Parent],[measures].[ParentHireDate]} on 0,
[Employee].[Employees].[Employee Level 06].members on 1
from
[Adventure Works]
Regards,
Charlie Liao
TechNet Community Support

Variable Designer (custom dimension and members selection greyed out)

Similar Messages

Maybe you are looking for