Variable export results based on machine

I have a very bizarre situation.
I have two iMacs, both running the exact same version of FCP X and Compressor 4 (I did a clean install to make sure... including cleaning out preference files, etc...), using the exact same settings.
When I export video on the one iMac (Mid-2010, 2.93, i7), it gives me beautiful files and all the settings are right.
When I export video on the other, it changes two critical things... specifically the bitrate and the fps settings.
Using, MediaInfo, I pulled the Metadata for both exports. Notice that in the "good export' the fps only has one setting: 29.97
Then notice that the bad file has two fps settings... 29.97 and 25.0
Also notice that under General, with the good export, it shows "overall bitrate", but with the bad file, it shows "bitrate mode: variable"
I have checked and double checked all my settings. To me all settings in FCP and Compressor on both of these computers are EXACTLY the same.
I'm wondering if the graphics cards is changing this? Or could it be a setting somewhere else?
It is really bizarre to me.
Any ideas?
***********Good Export**********
General
Complete name : /Volumes/My Book/Test Run/JBP-Week-Zero-Welcome-1.a.ii-TEST.mp4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 92.6 MiB
Duration : 8mn 16s
Overall bit rate : 1 563 Kbps
Movie name : JBP-Week-Zero-Welcome-1.a.ii
Encoded date : UTC 2015-04-29 01:18:00
Tagged date : UTC 2015-04-29 01:28:29
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 8mn 16s
Bit rate : 1 493 Kbps
Width : 640 pixels
Height : 360 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.216
Stream size : 88.5 MiB (96%)
Title : Core Media Video
Encoded date : UTC 2015-04-29 01:18:00
Tagged date : UTC 2015-04-29 01:28:29
Color range : Limited
Color primaries : BT.601 NTSC
Transfer characteristics : BT.709
Matrix coefficients : BT.601
Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 8mn 16s
Source duration : 8mn 16s
Bit rate mode : Constant
Bit rate : 64.0 Kbps
Channel(s) : 2 channels
Channel(s)_Original : 1 channel
Channel positions : Front: C
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 3.86 MiB (4%)
Source stream size : 3.86 MiB (4%)
Title : Core Media Audio
Language : English
Encoded date : UTC 2015-04-29 01:18:00
Tagged date : UTC 2015-04-29 01:28:29
*******************Bad Export**********
General
Complete name : /Users/jtboswell/Downloads/JBP-Week-Zero-Welcome-1.a.ii-TEST.mp4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 76.6 MiB
Duration : 8mn 14s
Overall bit rate mode : Variable
Overall bit rate : 1 300 Kbps
Movie name : JBP-Week-Zero-Welcome-1.a.ii
Encoded date : UTC 2015-04-28 22:08:37
Tagged date : UTC 2015-04-28 22:09:55
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 8mn 14s
Bit rate mode : Variable
Bit rate : 1 197 Kbps
Maximum bit rate : 768 Kbps
Width : 854 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Original frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.097
Stream size : 70.5 MiB (92%)
Title : Core Media Video
Encoded date : UTC 2015-04-28 22:08:37
Tagged date : UTC 2015-04-28 22:09:55
Color range : Limited
Color primaries : BT.601 NTSC
Transfer characteristics : BT.709
Matrix coefficients : BT.601
Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 8mn 14s
Source duration : 8mn 14s
Bit rate mode : Constant
Bit rate : 96.0 Kbps
Channel(s) : 2 channels
Channel(s)_Original : 1 channel
Channel positions : Front: C
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 5.77 MiB (8%)
Source stream size : 5.77 MiB (8%)
Title : Core Media Audio
Language : English
Encoded date : UTC 2015-04-28 22:08:37
Tagged date : UTC 2015-04-28 22:09:55

Your resolution is also different.
I'd be interested in verifying the source project settings for both. Also to verify the Compressor settings that are being applied. Could you post screen shots (four in all) of those settings – that is, screen shots taken of the applications' Inspector panes?
Russ

Similar Messages

Variable for restriction based on part of the String

Hello Experts,
I have a characteristic named Product Hierarchy (0PRODHIER) in the query. I want to create a variable so that the report displays the results based on the first character of 0PRODHIER. How can this be achieved?
Thanks,
Rishi

Hi Mayank
Thanks for your response. I knew that we can do this at the Cube level but I was just wondering if there is any other way to achieve this at the BEx level.
Thanks
Rishi

Help with exporting forms based data to Excel 2007

I have a user who is attempting to export forms based data to Microsoft Excel 2007 and when he attempts this he receives a message stating that Windows does not recognise this file type (tsv). I am not too familiar with Office 2007 so I am unable to direct this users as to how to correct this issue.
Is someone able to give me the navigation path to help me to assist this user? thanks

Did you verify the file type from Windows Explorer?
1) Right click on My Computer > Explore
2) Go to Tools > Folder Options
3) Click on File Types tab
4) Check if TSV file is defined there or not. If it is not there, click on New and add the File Extension

How to export result set from mysql query browser to .sql in oracle

Hi folks:
I was trying to export result set from MySql query browser to Oracle. I could able to do
File->Export Result Set-> Excel format...
What I am trying to get is .sql file so that I can run it as a script in my oracle db. Is there any way we can get .sql file with inserts and delimeters ....?
Did you guys get my question.?
Please throw some light on this....
Could be very appreciable ....
Thanks
Sudhir Naidu

Hi
Create a sql statement which generates the insert statements.
Something like this:
select 'insert into table1 (column1, column2, column3) values (' ||
column1 || ', ' || column2 || ', ' || column3 || ');' from table 1;
The || sign is the string concatenation sign in Oracle, replace it the appropriate sign in MySql. Export the result set of this query into a file, and you can run it in a SqlPlus.
Ott Karesz
http://www.trendo-kft.hu

TIPS(22) : EXPORTING TABLES BASED ON TABLESPACE NAME

제품 : ORACLE SERVER
작성날짜 : 1996-11-12
TIPS(22) : Exporting tables based on Tablespace name
====================================================
This script allows the user to enter the tablespace name and creates a list
of tables in exp format. Additional choices allow the export of over-extended
tables or tables over a certain size.
rem list.sql
rem Give list of tables depending on parameters
set termout on linesize 75 pagesize 0 verify off feedback off
clear buffer
clear columns
prompt
prompt This script will create list.out, which can be used
prompt to give export tables parameter file
prompt
accept Segment_Name Prompt 'Enter Seg Name : '
accept owner Prompt 'Enter Seg Owner : '
accept tsname prompt 'Enter TableSpace Name : '
accept min_extents Prompt 'Enter Minimum num of exts : '
accept min_size Prompt 'Enter Minimum seg size(M) : '
prompt
accept expchoice Prompt 'Is this list for exports ? : '
col srt noprint
SPOOL list.out
-- start bit
select 0 srt, decode(upper('&expchoice'),'Y','tables=(','')
from dual
union
-- data bit without end segment
select 1 srt, segment_name||decode(upper('&expchoice'),'Y',',','')
from dba_segments
where segment_type = 'TABLE'
and segment_name like upper('&&Segment_Name%')
and owner like upper('&&owner%')
and tablespace_name like upper('&&tsname%')
and extents >= (&&min_extents + 0)
and bytes >= (&&min_size + 0) * (1024*1024)
minus
-- remove last one (with ',' after the name)
select 1 srt, max(segment_name)||decode(upper('&expchoice'),'Y',',','')
from dba_segments
where segment_type = 'TABLE'
and segment_name like upper('&&Segment_Name%')
and owner like upper('&&owner%')
and tablespace_name like upper('&&tsname%')
and extents >= (&&min_extents + 0)
and bytes >= (&&min_size + 0) * (1024*1024)
union
-- data bit with end segment
select 3 srt, max(segment_name)||decode(upper('&expchoice'),'Y',')','')
from dba_segments
where segment_type = 'TABLE'
and segment_name like upper('&&Segment_Name%')
and owner like upper('&&owner%')
and tablespace_name like upper('&&tsname%')
and extents >= (&&min_extents + 0)
and bytes >= (&&min_size + 0) * (1024*1024)
order by 1,2
spool off
set heading on
****************************************************************

Hi,
You will have to use dynamic sql to create your second cursor.
DECLARE
     v_sql_query VARCHAR2(400);
     TYPE cur_typ IS REF CURSOR;
     c1 cur_typ;
     mYRec MyTable%rowtype;
BEGIN
     v_sql_query := 'select * from MyTable';
     OPEN c1 FOR v_sql_query;
          LOOP
          FETCH c1 INTO mYRec;
               EXIT WHEN c1%NOTFOUND;
               EXIT WHEN c1%NOTFOUND IS NULL;
/*processing here*/
          END LOOP;
     CLOSE c1;
END;
Regards

BPEL Process returns "empty variable/expression result."

Hi,
I have an Asynchronous BPEL Process which uses a DB Adapter (which in turn uses a custom SQL Procedure) to insert a value in to a table and return a sequence value generated in the procedure back to the BPEL Process. The process inserts the value in to the table but the sequence is not returned back and i get the below error,
<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
<part name="summary">
<summary>
empty variable/expression result.
xpath variable/expression expression "/ns2:OutputParameters/ns2:X_NO" is empty at line 94, when attempting reading/copying it.
Please make sure the variable/expression result "/ns2:OutputParameters/ns2:X_NO" is not empty.
</summary>
</part>
</selectionFailure>
If i see the process flow the invoke activity shows the sequence value is returned from the procedure but when the invoke activity passes that value to the Assign activity its lost and the above error is displayed.
The details i see in Invoke activity is below,
<messages>
<Invoke_1_DBProcWrite_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
<InputParameters
xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/SUR_NEW_BPEL_PROC/">
<P_NAME>Vivek</P_NAME>
</InputParameters>
</part>
</Invoke_1_DBProcWrite_InputVariable>
<Invoke_1_DBProcWrite_OutputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="OutputParameters">
<db:OutputParameters xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/SUR_NEW_BPEL_PROC/">
<X_NO>9</X_NO>
</db:OutputParameters>
</part>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
name="response-headers">[]</part>
</Invoke_1_DBProcWrite_OutputVariable>
</messages>
I use Jdeveloper version 10.1.3.3.0.4157. I did not recieve this error in Jdeveloper 10.1.3.1.
Please let me know how to resolve this issue.
Regards, Suresh

I have exactly the same problem!!!! I would appreciate someone from Product or other to explain why I can see the incoming variable being created but when XPath expression is attempted to extract a value so I can do an assignment I get a "empty variable/expression result".
Using JDEV10.1.3.3 and SOA 10.1.3.3 advanced install. My process is receiving a R12 Business Event listed here:
<?xml version="1.0" encoding="UTF-8" ?>
- <WF_EVENT_T xmlns="http://xmlns.oracle.com/xdb/APPS/BES_EVENT/BES_EVENT">
<PRIORITY xmlns="">50</PRIORITY>
<SEND_DATE xmlns="">2008-04-30T13:40:33.000-05:00</SEND_DATE>
<RECEIVE_DATE xmlns="">2008-04-30T13:40:40.000-05:00</RECEIVE_DATE>
<CORRELATION_ID xmlns="" />
- <PARAMETER_LIST xmlns="">
- <PARAMETER_LIST_ITEM>
<NAME>BO_ID</NAME>
<VALUE>123456</VALUE>
</PARAMETER_LIST_ITEM>
- <PARAMETER_LIST_ITEM>
<NAME>#CURRENT_PHASE</NAME>
<VALUE>201</VALUE>
</PARAMETER_LIST_ITEM>
</PARAMETER_LIST>
<EVENT_NAME xmlns="">oracle.apps.ar.hz.PersonBO.create</EVENT_NAME>
<EVENT_KEY xmlns="">777666</EVENT_KEY>
<EVENT_DATA xmlns="" />
- <FROM_AGENT xmlns="">
<NAME>WF_BPEL_QAGENT</NAME>
<SYSTEM>VIS12.US.ORACLE.COM</SYSTEM>
</FROM_AGENT>
<TO_AGENT xmlns="" />
<ERROR_SUBSCRIPTION xmlns="">TBo0FQQPy6ngQKjAuQAXWA==</ERROR_SUBSCRIPTION>
<ERROR_MESSAGE xmlns="" />
<ERROR_STACK xmlns="" />
</WF_EVENT_T>

Creating result based search programatically

Hi All,
I am trying to create a simple result based search programmatically. I need to do this because I want the user to basically be able to select a specific table name and then the search adjusts the criteria and results automatically based on the table selected. If you like it is a generic query mechanism.
I have attempted to do this by declaratively setting up the query region as far as possible and then adding the table fields and binding them to a VO instance that I have created (I also create the view definition programatically)
The query region renders and the go and clear buttons are available, the result table renders and if I do a blind query it works fine and the result appear. The problem I have is that for the fields in the table that have queriable set to yes, the search region is not rendering the search fields.
This is what I have done (all in process request for now to get it working)
OADBTransactionImpl dbTx = (OADBTransactionImpl)am.getTransaction();
OAViewDef viewDef = dbTx.createViewDef();
viewDef.setViewObjectClass("oracle.apps.fnd.framework.server.OAViewObjectImpl");
viewDef.setViewRowClass("oracle.apps.fnd.framework.server.OAViewRowImpl");
viewDef.addSqlDerivedAttrDef("RECORD_ID","RECORD_ID","java.lang.String",Types.VARCHAR,false,true,AttributeDef.READONLY);
viewDef.addSqlDerivedAttrDef("RUNTIME_KEY","RUNTIME_KEY","java.lang.String",Types.VARCHAR,false,true,AttributeDef.READONLY);
viewDef.addSqlDerivedAttrDef("STATUS","STATUS","java.lang.String",Types.VARCHAR,false,true,AttributeDef.READONLY);
viewDef.setSql(sqlStmt);
am.createViewObject("InterfaceTableVO1",viewDef);
OATableBean tableBean = (OATableBean)webBean.findChildRecursive("InterfaceTableVO1");
OAMessageStyledTextBean leaf = null;
leaf=(OAMessageStyledTextBean)createWebBean(pageContext,MESSAGE_STYLED_TEXT_BEAN,null,"RECORD_ID");
leaf.setViewUsageName("InterfaceTableVO1");
leaf.setViewAttributeName("RECORD_ID");
leaf.setWrapEnabled(false);
leaf.setPrompt("RECORD_ID");
leaf.setQueryable(true);
tableBean.addIndexedChild(leaf);
The query bean and table have been defined declaratively, my hope was when I added the leaf nodes to the table with query able set to true that the framework would automatically figure the bindings out but it doesn't seem to be doing this.
Could this be a UIX rendering problem that I need to get around somehow?
Thanks
Keith

anyone got any ideas on this one?

Can't export web based 'sent' mail out of Network Solutions server

can't export web based 'sent' mail out of Network Solutions. Inbox and mozilla based sent mail ok. thanks!

How about asking Network Solutions?

Export result of ssas query result to excel file

Hi All,
I have browsed a SSAS cube. I want to export result of SSAS cube into excel file.
Kindly give your input.
Thanks,
Vivek singh

Hi,
I do not know whether there is a direct solution but there is an indirect way of doing it. I always follow this method if I ever want to get MDX results into Excel.
1 - Install the DAX Studio (I know you want MDX results, so do not get confused by looking at the word DAX. Continue reading). You can download it from the following location.
http://www.sqlbi.com/tools/dax-studio/
2 - Once you install DAX Studio, Go to the Add-Ins ribbon. Click on DAX Studio.
3 - There is an option "Tabular Server" and there is a drop-down list where you can enter the SSAS (MD CUBE Server) server name. Enter the server name manually. If you have multiple SSAS Databases and if you are interested in a specific SSAS database
enter "Initial Catalog=Your SSAS Database Name" in Additional Options section and Click Connect. You can successfully connect to the SSAS Server now.
Here are the details described so far in pictorial representation.
4 - Enter your MDX manually and execute the code via DAX studio and you will get your results right-away in Excel.
Now, isn't that an elegant way of getting MDX results into Excel :) ? Besides Excel's Pivot Table option, I do not know whether there are any alternate solutions to this but wait for other Pros' comments as well.
Best regards...
Chandima Lakmal Fonseka

Error: empty variable/expression result

Hi ,
I am following the examples and initiating a bpel process(not the process given in the examples) through java. But when I execute the java code, I get the following error:
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.
xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {null}
parts: {{summary=<summary>empty variable/expression result.
xpath variable/expression expression "/client:helloProcessRequest/client:name" i
s empty at line 30, when attempting reading/copying it.
Please make sure the variable/expression result "/client:helloProcessRequest/cli
ent:name" is not empty.
</summary>}}
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.
I am sending the variable in the string with the following code:
String xml = "<SOAP-ENV:Envelope xmlns:SOAP-ENV=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:SOAP-ENC=\"http://schemas.xmlsoap.org/soap/encoding/\" xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\"><SOAP-ENV:Body><m:helloProcessRequest xmlns:m=\"http://xmlns.oracle.com/hello\"><m:name>revanth</m:name></m:helloProcessRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>";
Locator locator = new Locator("default","bpel",props);
IDeliveryService deliveryService = (IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
// construct the normalized message and send to collaxa server
NormalizedMessage nm = new NormalizedMessage( );
nm.addPart("payload", xml );
NormalizedMessage res = deliveryService.request("hello", "process", nm);
Map payload = res.getPayload();
Can anybody please tell me what is missing here?
Appreciate your help.
Thank you,
Revanth

Got it. Was sending the wrong string. Needed to send only the varaible and not the soap envelope. just for information, i had to send this string:
String xml = "<m:helloProcessRequest xmlns:m=\"http://xmlns.oracle.com/hello\"><m:name>revanth</m:name></m:helloProcessRequest>";
Sorry for any trouble.
Rev

How to run a particular case continuously in event based state machine architecture.

I am making a program using event based state machine architecture, it is running as expected whenever i am generating an event, case structure corresponding to that event executes.
we are taking some measurements from oscilloscope e.g. i am having one boolean button for rise time whenever i am pressing that that button it displays the value of rise time, it displays only once( since i have generated an event on that boolean button so it executes only once and displays value for one time and then comeback to timeout state) but in our program what we want, we want it to update value continously once that button is pressed.
Now for a time being i have placed while loop on the case corresponding to rise time but this is not the right approach.
since i am using state machine architecture( event based ), i am not getting how to run particular case continuously ,or if there is any other better architecture that i can use to implement the same application.
Attached below is the program.
Attachments:
OScilloscope .zip ‏108 KB

Say, in the attached program, when the user selects Autoset, it inserts corresponding state (Autoset) and now if you want this state to run again and again, probbbly you can again insert Autoset state while executing Autoset state... ohhh its confusing... check the picture below (A picture is worth a thousand words):
1. Based on user selection, insert Autoset state.
2. Re-insert Autoset state again and again while executing Autoset state.
3. Now to come out of this loop, based on appropriate event generation, insert any other state AT FRONT (equivalent to Enqueue Element At Opposite End).
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How to create Store Procedure for export result select in .txt or .csv

Hello,
I'm using MSSQL Server.
How to export results query in .txt or .csv?
But
I can not use bcp or SQLCMD.

1) linked server
insert into txtsrv...table1#txt(CustomerNumber,CustomerName,EntryDate)
select orderid, shipname, orderdate
from Northwind..orders
Set up the linked server
Connecting a directory of text files as a linked server is easy. Here’s how:
In Windows, create a new directory for the linked server.
For this article, that directory will be E:\txtsvr.
Add that directory as a linked server with sp_addlinkedserver:
EXEC sp_addlinkedserver txtsrv, 'Jet 4.0',
'Microsoft.Jet.OLEDB.4.0', 'e:\txtsrv', NULL, 'Text'
That’s all that’s required to add the linked server txtsrv
as a connection to the text files in E:\txtsvr, but there are
no tables in txtsvr yet. Also missing is a required file, schema.ini,
which must contain a description of each table’s format.
You can learn more about schema.ini from the Microsoft MSDN Library,
but for now, just use Notepad or your favorite text editor
to create the file e:\txtsrv\schema.ini as shown in Listing 1.
In addition, create an empty text file in e:\txtsrv named table1.txt.
The file e:\txtsrv\table1.txt is now an empty table in the linked server txtsrv.
We can see that if we list information about all the tables in txtserv with
the system stored procedure sp_tables_ex:
EXEC sp_addlinkedsrvlogin txtsrv, FALSE, Admin, NULL
EXEC sp_tables_ex txtsrv
Text files are tables
We can’t issue a CREATE TABLE statement against this linked server,
but we have created a table easily enough. We can, however,
run INSERT and SELECT queries, if we use the four-part naming
convention <server>…<table> (that’s three dots):
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Exporting vector based images

What is the best way of exporting vector based images from Flash so I can open it in Illustrator?
I frequently design basic vector graphics in Flash as I find manipulating shapes much easier and intuitive. Now with the upgrade I am finding this impossible to save out and it has really slowed down my progress.
Is there anyway whatsoever in achieving this as Flash is, after all a brilliant vector based programme?
Best regards,
Sam

Hi Sam-Rios,
SVG export is a Work in Progress for exporting out vector content from Flash CC and would be usable in Illustrator as well. This would be available with the next major update to be released shortly.
For now, you may try out a third party SVG exporter for Flash Pro:
https://github.com/davebelais/Extensible/blob/master/Javascript/Extens ible/SVG.jsfl
Hope this helps!
-Nipun

Variable/expression result error

Hi,
I am trying to run a BPEL process which reads data from an EDI file, transforms it and calls the Sales Order creation API. The process is giving the following error at runtime:
<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"><part name="summary"><summary>empty variable/expression result.
xpath variable/expression expression "ora:processXSLT('EDI2Oracle.xsl',bpws:getVariableData('ReceiveEDI850XML_Dequeue_InputVariable','Transaction-850'))" is empty at line 69, when attempting reading/copying it.
Please make sure the variable/expression result "ora:processXSLT('EDI2Oracle.xsl',bpws:getVariableData('ReceiveEDI850XML_Dequeue_InputVariable','Transaction-850'))" is not empty.
</summary>
</part></selectionFailure>
Please can anyone help me resolve this issue. Also, does any one have a concise document on how to import an EDI and create 850 Purchase Order.
Regards,
Balu

Hi,
can you please provide some details of the ReceiveEDI850XML_Dequeue_InputVariable?
What is the input before your transform?
What value is in this Transaction-850 parameter and what is the namespace of the Input?
Can you please check if the namespaces are set right?

Does the bad formance results from Virtual Machine?

My Oracle 10g testing database is runing on a Virtual Mchine and its performance is not good. Does the bad formance results from Virtual Machine?
Though the resources are enough, I still think the virtual machine can damage the performance. Does any one has the same experience?
Thank you

Answered the same just a while ago...
Can Virtual Machin system make negative impact to the database performance?

Variable export results based on machine

Similar Messages

Maybe you are looking for