Variable interplay between include files and parent files?

How can I define a variable in a parent file which is then
used in some
logic in an include file? For example, if I have -
<?php
$foo = 1;
?>
<?php require_once('foo.php'); ?>
and in foo.php, I have -
<?php if ($foo == 1) { echo "FOO"; } ?>
it doesn't seem to work. Am I testing improperly, or what?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================

Mine, too. But when you don't know what you are doing,
sometimes the 'proof
of concept' tests you design are a bit off-kilter, doncha
know? I can only
guess that i was suffering from that.
I'll verify that I correctly reported this and post back....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Gary White" <[email protected]> wrote in message
news:[email protected]..
> On Wed, 9 May 2007 20:26:02 -0400, "Murray *ACE*"
> <[email protected]> wrote:
>
>>Yeah - of course, I changed everything about it, too!
>
>
> I'm still bewildered by what caused the problem. If I
have two files,
> first (includevar.php) like this:
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
> "
http://www.w3.org/TR/html4/strict.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <title>Variable in an Include Test</title>
> <meta http-equiv="imagetoolbar" content="no">
> </head>
> <body>
> <p><?php
> $x='This is $x defined in includevar.php';
> include 'foo.php';
>
> print "$y";
> ?></p>
> </body>
> </html>
>
> And foo.php like this:
>
> <?php
> $y='This is $y defined in foo.php';
> print "foo.php says $x<br>\n";
> ?>
>
> The output I get is:
>
> foo.php says This is $x defined in includevar.php
> This is $y defined in foo.php
>
> Clearly, the variable defined in the parent file is
recognized in
> foo.php and the variable defined in foo.php is
recognized in the parent
> file. Hence my bewilderment.
>
> Gary

Similar Messages

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

Diff between Log files and Trace files

hi
What is the exact differences between Log Files and Trace Files.
And the relevant informative URL/reference materils would be highly appriciated.
Thanks
Sekhar

Hi,
Go through these,
http://help.sap.com/saphelp_nw04/helpdata/en/d1/7b1e40777cdd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bf8c890-0201-0010-8b8c-fc93fa1f4795
Hope it clarifies
Regards
Srinivasan T

Load data with SQL Loader link field between CSV file and Control File

Hi all,
in a SQL Loader control file, how do you specify link with field in CSV file and Control file?
E.g. if I wat to import the record in table TEST (col1, col2, col3) with data in csv file BUT in different position. How to do this?
FILE CSV (with variable position):
test1;prova;pippo;Ferrari;
xx;yy;hello;by;
In the table TEST i want that col1 = 'prova' (xx),
col2 = 'Ferrari' (yy)
col3 = default N
the others data in CSV file are ignored.
so:
load data
infile 'TEST.CSV'
into table TEST
fields terminated by ';'
col1 ?????,
col2 ?????,
col3 CONSTANT "N"
Thanks,
Attilio

With '?' mark i mean " How i can link this COL1 with column in csv file ? "
Attilio

In trace file and output file showing bind variable instead of value

Hi,
database 9i
optimizer = choose(for cost based)
In my trace file and output file showing bind variable instead of value.
in my trace file 20 queries.
I alse set this parameter in session level.
alter session set events '10046 trace name context forever, level 4';
but still showing traceoutput file bind variable.
Pls help its very urgent

Can you post the query for which the bind variable values are not being shown and the trace output for the same?
Probably it is listed down somewhere when you actually executed the query among the others. Try completely analyzing your trace file..

I'm trying to view my movies through itunes and apple TV but only a few appear in itunes when i add to library, they include .avi and mp4 files. Whys have only a few copied and rest wont add to my library, can someone help? Do I need to convert them?

I'm trying to view my movies through itunes and apple TV but only a few appear in itunes when i add to library, they include .avi and mp4 files. Whys have only a few copied and rest wont add to my library, can someone help? Do I need to convert them?

What are the file extensions of the movies that won't import to iTunes
What video content works in iTunes
What video content works with iTunes and mobile devices?
iTunes:
Video content purchased from the iTunes Store.
QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
Video podcasts.
iTunes Digital Copies.
iTunes Store Movie Rentals (Requires iTunes 9 or later).

Difference between .jar, .war and .ear file

Hi,
I am pretty new to J2EE technology.
I would like to know what is the difference between .jar, .war and .ear files and how they are deployed on webserver.
Thanks,

Files with a .jar extension or JAR files, are essentially just a collection of files compressed using the ZIP/ZLIB compression format.
JAR (short for Java Archive) files were introduced in the early days of Java as a means to conveniently package and distribute Java applications and components. Since then, a number of additions to the Java platform have followed suit. The introduction of the EAR file is one such addition.
An EAR (Enterprise Archive) file is a JAR file that contains a J2EE application.
A J2EE application is a group of Web modules that collectively perform as a single entity.
A Web Module is an entity consisting of one or more resources such as HTML files, Java class files, XML files, etc. Web Modules are packaged in Web Archive (WAR) files.
Looking at it from a top-down view, EAR files contain JAR files and WAR files. Packaging resources in WAR files, JAR files and eventually EAR files, makes it easy to reuse and reassemble components as new J2EE applications and distribute them to new environments.
For example, Tomcat deals only with WAR files.
So, in order to auto-deploy a Web application to a Tomcat environment, you must place an application's WAR file in the appropriate directory or use Tomcat's deployment tools to manually deploy the file.
If you already have an EAR file that contains the WAR file, you can extract the WAR file and use it as is. If you do not have the EAR file or the WAR file, you can use any number of compliant tools to create the WAR file. Tomcat is a servlet/JSP container available from the jakarta.apache.org site.

Difference between vmx swap file and vswp file

Hi Guys,
Just want to know the difference between vmx swap file and vswp file. are these same files or different.
regards
VINAY

The confusion is caused because of the name VMX which we take for granted as the .vmx file which stores the configuration file. First of all the VMX here stands for VM eXecutable and not the same as the .vmx file in the virtual machine directory .
when we are running a virtual machine , there comes some basic overheads , ie the processes required to boot the virtual machine , keep it up and running and the agents consume some amount of memory and processing power in addition to the actual load created by the OS application running on the VM.
the VM swap file is there to enable the VM's guest OS to consume less physical memory than the configured memory
the VMX swap file is there to reduce the memory reserved for the VMX process , ie the overhead which we discussed right now .
ie the VM swap is the internal matter of a VM where as the VMX swap file is the responsibility of our VMkernel
hope it helps , correct me if I am wrong or confusing

Difference between .war file and .ear file

Hi,
what is the difference between .war file and .ear file ?
Please let me know with appropriate explanation.

War file means web application archive. It is archived file having a collection of JSP, servlets and static pages that together costitute a web application. It contains one WEB-INF directory which will have a file named web.xml which defines the structure of the web application.
On the other side EAR file is Enterprise application archive. It is file having packaged content of one or more modules into a single archive so that the deployment of all the modules can be done simultaneously on the application server. It also contains XML files called deployment descriptors which gives the details of the deployment method. This deployment descriptor will be present in the folder META-INF folder.
So the main difference betwwen the two is that Ear file is having collection of various modules to be deployed on the application server while the WAR file is used to deploy the web applications.

How to Add JAR files and Config files to CLASSPATH at runtime?

QUERY:
During runtime, I need to load the JAR files and relevant config files( .cfg files and .properties file) into CLASSPATH and run a specific java program from one of the JAR which is available in CLASSPATH.
Please advise me any relevant Java API details or a sample java program to implement the above use case.
Thanks in advance.

During runtime, I need to load the JAR files and relevant config files( .cfg files and .properties file) into CLASSPATH and run a specific java program from one of the JAR which is available in CLASSPATH.
Please advise me any relevant Java API details or a sample java program to implement the above use case.
You don't add to YOUR classpath once your app is launched.
You create a NEW process for the app you want to run and provide the proper environment for it to run in - including any PATH or CLASSPATH environment variables.
The Java API for the ProcessBuilder class has a simple example that shows how to create the arguments and launch an external application.
ProcessBuilder (Java Platform SE 7 )
There are also PLENTY of other examples of using ProcessBuilder; just search the net.

Hi all, need data file and co file after single transport in 6.4 or 6.7

hi all
following is the requirement
To process/compile the attached programs (given below) in 6.4/7 Kernel (SAP 6.4 version or 6.7 version )and send a single transport (Data File and Co File).
these data file and co file are flat files.
CAN ANYONE HELP ME GETTING THESE FLAT FILES. I need these flat files urgently.
WHAT U HAVE TO DO IS:
IF U HAVE 6.4 OR 6.7 VERSION, JUST TRANSPORT FOLLOWING 10 PROGRAMS IN SINGLE TRANSPORT IN TESTING SYSTEM OR DEVELOPEMENT SYSTEM AND AFTER GETTING DATA FILE AND CO FILE U CAN REVERT THE TRANSPORT.
Programs files are as follows: (total number of prog is 10)
1.
FUNCTION Z_3N_CKS_EXIST_USER .
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSMDTID) TYPE USR02-MANDT DEFAULT SY-MANDT
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" EXCEPTIONS
*" USER_DONT_EXIST
*" USER_EXISTS
FUNCTION TO CHECK IF USER EXISTS
CLEAR RCODE.
CALL FUNCTION 'USER_EXISTS'
EXPORTING
BNAME = CKSUSRID
CLIENT = CKSMDTID
EXCEPTIONS
USER_DONT_EXIST = 1
USER_EXISTS = 0.
RCODE = SY-SUBRC.
ENDFUNCTION.
2.
FUNCTION Z_3N_CKS_LOCKSTATE.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO OBTAIN THE CURRENT LOCK STATUS FOR A USER
*{ PASSGOAPR06
*\DATA:LOCKSTATE(50) type c,
*\C_LOCKED_BY_ADMIN like usr02-uflag.
*\tables:usr02.
DATA:LOCKSTATE(50) type c.
*} PASSGOAPR06
CLEAR: RCODE, LOCKSTATE.
SELECT SINGLE * FROM USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01. "No such User
EXIT.
ENDIF.
*{ PASSGOAPR06
IF USR02-UFLAG Z C_LOCKED_BY_ADMIN AND
USR02-UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF USR02-UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF USR02-UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
uflag = usr02-uflag.
IF UFLAG Z C_LOCKED_BY_ADMIN AND
UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
3.
FUNCTION Z_3N_CKS_PWDCHG_INITIAL.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO INITIALISE USERs PASSWORD, USER WILL BE FORCED
TO CHANGE PASSWORD ON NEXT LOGIN
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01.
else.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
PASSWORD = CKSUSRPWD
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
loop at return.
if return-type eq 'E' or return-type eq 'A'.
rcode = 13.
endif.
endloop.
endif.
ENDFUNCTION.
4.
FUNCTION Z_3N_CKS_VERIFY_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE RSYST-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE OPTIONAL
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO VALIDATE A USER
*{ PASSGOAPR06
TABLES:USR02.
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC = 4.
RCODE = 01. "no such user
EXIT.
ELSEIF CKSUSRPWD = SPACE.
RCODE = 03. "invalid old password
EXIT.
ELSE.
CALL FUNCTION 'SUSR_LOGIN_CHECK_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = CKSUSRPWD
EXCEPTIONS
WAIT = 1
USER_LOCKED = 2
USER_NOT_ACTIVE = 3
PASSWORD_EXPIRED = 4
WRONG_PASSWORD = 5
NO_CHECK_FOR_THIS_USER = 6
INTERNAL_ERROR = 7
OTHERS = 8
CASE SY-SUBRC.
WHEN '2'. RCODE = 02. "user disabled/blocked
WHEN '3'. RCODE = 02. "user disabled/blocked
WHEN '4'. RCODE = 03. "invalid old password
WHEN '5'. RCODE = 03. "invalid old password
WHEN '8'. RCODE = 12. "internal error
ENDCASE.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
5.
*& Include ZMS01JTOP *
PROGRAM MS01JTOP MESSAGE-ID 01 LINE-SIZE 132. "Berechtigungsdatenpflege
13.08.93
INCLUDE MS01CTP2.
INCLUDE MS01CTCO.
TABLES: XU200, XU213, XU310, XU350, XU390, XU400.
TABLES: TSTC, TSP03, TPARA, TPARAT.
TABLES: *USR01, *USR03, USR15.
TABLES: SOUD, SOUD3.
*ABLES: ZCSA, ADRS.
*{ PASSGOAPR06
TABLES: usr02.
DATA: uflag type x.
DATA: begin of return occurs 0.
INCLUDE structure bapiret2.
DATA: end of return.
DATA calling_cksusrid like usr02-bname.
DATA: init_pass like BAPIPWD.
INCLUDE USER_CONSTANTS.
*} PASSGOAPR06
CONTROLS TC213 TYPE TABLEVIEW USING SCREEN 213.
CONTROLS TC520 TYPE TABLEVIEW USING SCREEN 350.
DATA: COPYOK TYPE I,
RENAMEOK TYPE I,
DATFM1,
DATFM2,
DATFM3,
DATFM4,
DCPFM1,
DCPFM2,
USERNAME LIKE USR01-BNAME,
LOCK,
UNLO,
STATFLAG TYPE I VALUE 0,
NAVIFLAG TYPE I VALUE 0,
PARTOPIX TYPE I,
PARFILL TYPE I,
PARAMETER LIKE USR05-PARVA,
PARID LIKE USR05-PARID,
PARLOOP LIKE SY-STEPL,
SHOW_ONLY VALUE ' ',
INTPRO_LOADED TYPE I VALUE 0,
EXT_SECURITY VALUE ' '.
DATA: H_201_USGRP LIKE USGRP-USERGROUP,
H_201_VALID TYPE C,
CC201 LIKE SY-CUCOL VALUE 2,
CR201 LIKE SY-CUROW VALUE 6,
SAVE_LINE201 LIKE SY-LILLI VALUE 1,
SAVE_LSIND201 LIKE SY-LSIND VALUE 1.
DATA: OFFICENAME LIKE SOUD-USRNAM.
DATA: BEGIN OF NAME_IN.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_IN.
DATA: BEGIN OF NAME_OUT.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_OUT.
DATA: BEGIN OF EMPTYPROF OCCURS 2.
INCLUDE STRUCTURE USREF.
DATA: END OF EMPTYPROF.
DATA: BEGIN OF PROFILES OCCURS 10.
INCLUDE STRUCTURE USREF.
DATA: END OF PROFILES.
DATA: MAXPAR TYPE I VALUE 300.
DATA: BEGIN OF TABPAR OCCURS 300,
PARID LIKE USR05-PARID,
PARVA LIKE USR05-PARVA,
END OF TABPAR.
DATA: BEGIN OF DELTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF DELTAB.
DATA: BEGIN OF ADDTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF ADDTAB.
DATA: BEGIN OF ADDRESS_DATA.
INCLUDE STRUCTURE SADRP_USR.
DATA: END OF ADDRESS_DATA.
DATA:
CLEAR TYPE X VALUE '00'.
*ATA: BEGIN OF ADRSDATEN.
INCLUDE STRUCTURE ADRS.
*ATA: END OF ADRSDATEN.
06.10.95 Tosun
DATA 930_FLAG.
"$$
6.
FUNCTION Z_3N_CKS_LOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM LOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_LOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
7.
FUNCTION Z_3N_CKS_PWDCHG_DIRECT.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO CHANGE USERs PASSWORD
Password is initialised to a fixed value,
to avoid having to provide the valid old password
If the password change fails, the change is
rolled back - this is required because
BAPI_USER_CHANGE does an internal commit.
CLEAR: USR02, RCODE.
DATA: L_TIME LIKE SY-UZEIT,
ZLIN TYPE I.
*{ PASSGOAPR06
calling_cksusrid = cksusrid. "Save calling userid
init_pass = 'INITPASS'.
*} PASSGOAPR06
do 1 times.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 1.
else.
* Change login to initpass.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
*{ PASSGOAPR06
*\ PASSWORD = 'INITPASS'
PASSWORD = init_pass
*} PASSGOAPR06
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
* Evaluate return table, if not success, rcode = 13
describe table return lines zlin.
IF zlin > 0.
IF return-type ne 'S'.
rcode = 13.
exit.
ENDIF.
ENDIF.
* Wait 1 second, otherwise table ush02 gets the same key as before.
* Not very good, but its the only way, because the wait up to
* statement includes a db-commit.
L_TIME = sy-uzeit.
WHILE L_TIME = sy-uzeit.
GET TIME.
ENDWHILE.
* Change 'INITPASS' to input login
CALL FUNCTION 'SUSR_USER_CHANGE_PASSWORD_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = 'INITPASS'
NEW_PASSWORD = CKSUSRPWD
NEW_BCODE = '0000000000000000'
NEW_CODVN = ' '
EXCEPTIONS
CHANGE_NOT_ALLOWED = 1
PASSWORD_NOT_ALLOWED = 2
INTERNAL_ERROR = 3
CANCELED_BY_USER = 4
OTHERS = 5.
case sy-subrc.
when '0'. rcode = 0.
when '1'. rcode = 2.
when '2'. rcode = 4.
when '3'. rcode = 12.
when '4'. rcode = 2.
when '5'. rcode = 12.
ENDCASE.
ENDIF.
exit. "end of do 1 times "
enddo.
* rollback if it didn't work
if not rcode is initial.
rollback work.
endif.
ENDFUNCTION.
8.
FUNCTION Z_3N_CKS_UNLOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM UNLOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_UNLOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
9.
*& Include ZMS01JO10 *
MS01JO10 Module before Output
14.05.93
MODULE D150_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D150_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10 AND SY-LILLI = 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10.
XU150-VON = SY-LISEL.
ELSE.
COUNTX = PUSR - 1.
ASSIGN SY-LISEL+COUNTX(12) TO <TEXT>. " unicode
WRITE <TEXT> TO XU150-VON.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
IF FERTIG = 2.
FCODE = 'BACK'.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE.
MODULE D150_SETSTATUS *
PF-Status setzen *
MODULE D150_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 150.
XU150-SELPROF = XU150-SELFEST = XU150-SELADRE = XU150-SELPARA = 'X'.
XU150-SELMENU = 'X'.
ENDMODULE.
MODULE D155_SETSTATUS *
PF-Status setzen *
MODULE D155_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 155.
ENDMODULE.
MODULE D200_SELECT *
Einen Eintrag aus der Liste ins Dynpro uebernehmen *
MODULE D200_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU200-XUSER = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
IF FCODE2 = 'USER' OR FCODE2 = 'FEST' OR FCODE2 = 'ADRE' OR
FCODE2 = 'PARA' OR FCODE2 = 'ADMI' OR FCODE2 = 'RESE' OR
FCODE2 = 'N '.
SUPPRESS DIALOG.
ENDIF.
PERFORM SET_STATUS USING 200.
ENDMODULE.
MODULE D213_VALOUT *
Festwerte auf das Dynpro schreiben. *
MODULE D213_VALOUT OUTPUT.
DEL = 0.
XU213-DIA = '.'.
XU213-ODC = '.'.
XU213-BDC = '.'.
XU213-CPIC = '.'.
XU213-BATCH = '.'.
CASE USR02-USTYP.
WHEN TYPDIA.
XU213-DIA = 'X'.
WHEN TYPBATCH.
XU213-BATCH = 'X'.
WHEN TYPCPIC.
XU213-CPIC = 'X'.
WHEN TYPBDC.
XU213-BDC = 'X'.
WHEN TYPODC.
XU213-ODC = 'X'.
ENDCASE.
IF USR02-LTIME <> SPACE AND USR02-LTIME <> '000000'.
LOOP AT SCREEN.
CASE SCREEN-GROUP1.
WHEN 'MOD'.
SCREEN-INVISIBLE = '1'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDCASE.
ENDLOOP.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
CODEFLAG = 1.
ELSE.
CLEAR XU213-BCODE.
CLEAR XU213-BCODE2.
IF USR02-BCODE <> '0000000000000000' AND BCODE_C = SPACE.
CODEFLAG = 0.
ENDIF.
IF CODEFLAG = -2.
SET CURSOR FIELD 'XU213-BCODE'.
MESSAGE S290.
ELSE.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
ENDIF.
ENDIF.
ENDMODULE.
MODULE D213_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D213_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 4.
MESSAGE S209.
ELSE.
ASSIGN SY-LISEL(PROFLNG) TO <TEXT>.
MOVE <TEXT> TO XU213-PROFILE.
PERFORM AUTH_CHECK USING OBJ_PROF
XU213-PROFILE SPACE ACT_INCLUDE RC.
IF RC <> 0.
MESSAGE S478 WITH XU213-PROFILE.
ELSE.
FOUND = 0.
LOOP AT TABUSR.
IF TABUSR-PROFILE = XU213-PROFILE.
FOUND = 1.
MESSAGE S268 WITH XU213-PROFILE.
EXIT.
ENDIF.
ENDLOOP.
IF FOUND = 0.
PERFORM EXIST_USR10
USING XU213-PROFILE AKTIVATED SPACE RC.
CLEAR TABUSR.
TABUSR-PROFILE = XU213-PROFILE.
IF USR10-TYP = COLECTPROF.
TABUSR-SAMPROF = 'X'.
ENDIF.
Profiletext lesen
CLEAR USR11.
SELECT SINGLE * FROM USR11
WHERE LANGU = SY-LANGU
AND PROFN = TABUSR-PROFILE
AND AKTPS = AKTIVATED.
TABUSR-PTEXT = USR11-PTEXT.
APPEND TABUSR.
XU213-FILL = XU213-FILL + 1.
IF XU213-FILL >= MAXUSR.
MESSAGE S269.
ENDIF.
UCHANGE = 1.
PERFORM NOTSAVED.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 213.
PERFORM MESSAGE.
IF EXT_SECURITY <> '1'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'EXT'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE.
MODULE D213_PROFOUT *
Profiles auf den Bildschirm ausgeben. *
MODULE D213_PROFOUT OUTPUT.
include <symbol>.
COUNTX = XU213-TOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= XU213-FILL. "Am Ende der Tabelle ?
READ TABLE TABUSR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABUSR TO XU213. "Daten auf den Bildschirm
xu213-samprof = sym_documents.
ENDIF.
ENDIF.
USRLOOP = SY-LOOPC.
ENDMODULE.
MODULE D254_SUPPRESS *
Dialog fuer Dynpro 254 unterdruecken *
MODULE D254_SUPPRESS OUTPUT.
SUPPRESS DIALOG.
ENDMODULE.
MODULE D310_SETSTATUS *
PF-Status setzen *
MODULE D310_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 310.
IF STATFLAG = 1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'USR01-CATTKENNZ '.
AUTHORITY-CHECK OBJECT 'S_DEVELOP'
ID 'DEVCLASS' DUMMY
ID 'OBJTYPE' FIELD 'SCAT'
ID 'OBJNAME' DUMMY
ID 'P_GROUP' DUMMY
ID 'ACTVT' FIELD '70'.
IF SY-SUBRC <> 0.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
PERFORM SET_STATUS USING 330.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D310_FORMAT_OUT. *
Datumsformat und Dezimalpunktformat entsprechend Daten aus usr01 *
ankreuzen. *
MODULE D310_FORMAT_OUT OUTPUT.
XU310-DATFM1 = ' '.
XU310-DATFM2 = ' '.
XU310-DATFM3 = ' '.
XU310-DATFM4 = ' '.
XU310-DATFM5 = ' '.
XU310-DCPFM1 = ' '.
XU310-DCPFM2 = ' '.
XU310-SPDB1 = ' '.
XU310-SPDA1 = ' '.
IF USR01-DATFM < 1 OR USR01-DATFM > 5.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddatfm'
ID 'VALUE' FIELD USR01-DATFM.
ENDIF.
CASE USR01-DATFM.
WHEN 1.
XU310-DATFM1 = 'X'.
WHEN 2.
XU310-DATFM2 = 'X'.
WHEN 3.
XU310-DATFM3 = 'X'.
WHEN 4.
XU310-DATFM4 = 'X'.
WHEN 5.
XU310-DATFM5 = 'X'.
WHEN OTHERS.
XU310-DATFM1 = 'X'.
ENDCASE.
IF USR01-DCPFM = ' '.
XU310-DCPFM1 = 'X'.
ELSE.
XU310-DCPFM2 = 'X'.
ENDIF.
IF USR01-SPDB = 'G'.
XU310-SPDB1 = 'X'.
ENDIF.
IF USR01-SPDA = 'D'.
XU310-SPDA1 = 'X'.
ENDIF.
CLEAR TSP03.
SELECT SINGLE * FROM TSP03
WHERE PADEST = USR01-SPLD.
ENDMODULE.
MODULE D320_SETSTATUS *
PF-Status setzen *
MODULE D320_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 320.
ELSE.
PERFORM SET_STATUS USING 340.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D330_SETSTATUS *
PF-Status setzen *
MODULE D330_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 330.
ENDMODULE.
MODULE D340_SETSTATUS *
PF-Status setzen *
MODULE D340_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 340.
ENDMODULE.
MODULE D350_SETSTATUS *
PF-Status setzen *
MODULE D350_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
TABPAR-PARID = SY-LISEL.
APPEND TABPAR.
PARFILL = PARFILL + 1.
ENDIF.
SELE = 0.
ENDIF.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 350.
ELSE.
PERFORM SET_STATUS USING 360.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D350_PAROUT *
Parameter auf den Bildschirm ausgeben. *
MODULE D350_PAROUT OUTPUT.
COUNTX = PARTOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= PARFILL. "Am Ende der Tabelle ?
READ TABLE TABPAR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABPAR TO XU350. "Daten auf den Bildschirm
SELECT SINGLE * FROM TPARAT
WHERE SPRACHE = SY-LANGU
AND PARAMID = TABPAR-PARID.
ENDIF.
ENDIF.
PARLOOP = SY-LOOPC.
ENDMODULE.
MODULE D351_SETSTATUS *
PF-Status setzen *
*ODULE D351_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU350-PARID = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 352.
SUPPRESS DIALOG.
*NDMODULE.
MODULE D360_SETSTATUS *
PF-Status setzen *
MODULE D360_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 360.
ENDMODULE.
MODULE D390_STATUS *
PF-Status setzen. *
MODULE D390_STATUS OUTPUT.
data uflag_x type x. " unicode
SELECT SINGLE * FROM USR02
WHERE BNAME = XU200-XUSER.
uflag_x = USR02-UFLAG. " unicode
IF SY-SUBRC <> 0.
XU390-STATTEXT = ' Nicht vorhanden.'(222).
ELSE.
IF uflag_x Z YULOCK AND uflag_x Z YUSLOC. " unicode
PERFORM SET_STATUS USING 390.
XU390-STATTEXT = ' Nicht gesperrt. '(223).
ELSE.
IF uflag_x O YULOCK. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Falschanmeldungen gesperrt !!!'(224).
ENDIF.
IF uflag_x O YUSLOC. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Systemmanager gesperrt !!!'(225).
ENDIF.
ENDIF.
ENDIF.
LOCK = '.'.
UNLO = '.'.
ENDMODULE.
MODULE D400_CLEAR_CODE *
Passwortfeld loeschen. *
MODULE D400_CLEAR_CODE OUTPUT.
CLEAR XU400-NEWCODE.
CLEAR XU400-NEWCODE1.
ENDMODULE.
MODULE D400_SETSTATUS *
PF-Status setzen *
MODULE D400_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 400.
ENDMODULE.
MODULE D500_SUPPRESS *
Dynpro unterdruecken *
MODULE D500_SUPPRESS OUTPUT.
SET PF-STATUS '0200'.
SUPPRESS DIALOG.
ENDMODULE.
*& Module D214_SETSTATUS OUTPUT
MODULE D214_SETSTATUS OUTPUT.
SET PF-STATUS '0214'.
SET TITLEBAR '214'.
ENDMODULE. " D214_SETSTATUS OUTPUT
*& Module D216_PROFOUT OUTPUT
MODULE D216_PROFOUT OUTPUT.
COUNTX = XU213-TOPIX2 + SY-STEPL - 1. "Bild-oben-Pos. in Tab. festst
IF COUNTX <= XU213-FILL2. "Am Ende der Tabelle ?
READ TABLE INTPRO2 INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING INTPRO2 TO XU213. "Daten auf den Bildschirm
ENDIF.
ENDIF.
ENDMODULE. " D216_PROFOUT OUTPUT
*& Module D504_STATUS OUTPUT
MODULE D504_STATUS OUTPUT.
SET PF-STATUS '0504'.
SET TITLEBAR '604'.
ENDMODULE. " D504_STATUS OUTPUT
*& Module D217_SETSTATUS
MODULE D217_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 217.
PERFORM MESSAGE.
IF FERTIG = -1.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE. " D217_SELECT OUTPUT
*& Module D202_SETSTATUS OUTPUT
text *
MODULE D202_SETSTATUS OUTPUT.
SET PF-STATUS '0203'.
SET TITLEBAR '203'.
ENDMODULE. " D202_SETSTATUS OUTPUT
*& Module D200_LESEN_MEMORY OUTPUT
Schnittstelle mit RSUSR008
call transaction su01 and skip first screen
MODULE D200_LESEN_MEMORY OUTPUT.
IMPORT FCODE FROM MEMORY ID 'OK_CODE'.
EXPORT FCODE FROM SPACE TO MEMORY ID 'OK_CODE'.
ENDMODULE. " D200_LESEN_MEMORY OUTPUT
"$$
10.
*& Report ZSAPMS01J *
23.10.92
set extended check off.
INCLUDE ZMS01JTOP.
*INCLUDE MS01JTOP. "Datendeklarationen
INCLUDE ZMS01JO10.
*INCLUDE MS01JO10. "PBO-Module
*INCLUDE ZMS01JI10.
INCLUDE MS01JI10. "PAI-Module
*INCLUDE ZMS01JF10.
INCLUDE MS01JF10. "Forms
*INCLUDE ZMS01JR10.
INCLUDE MS01JR10. "Reporting
*INCLUDE ZMS01CC10.
INCLUDE MS01CC10. "Checks
*INCLUDE ZMS01CD10.
INCLUDE MS01CD10. "Datenzugriffe
set extended check on.
see there are in total 10 prog that should go in one trasport order. this will creat data file and co file. these are flat files. i want these flat files.
do it in developement server or testing server and then delete it or revert it once you get data file or co file.
i will greatful to u if you could send me these flat files.
thanx in advance
raj

hi all,
this can be done in 4.6 version also.
thanx for spending time on this.
thanx&regards
raj

Table files and Index files 2GB on Windows 2003 Server SP2 32-bit

I'm new to Oracle and I've ran into the problem where my Table files and Index files are > 2GB. I have an Oracle instance running version 10.2.0.3.0. I have a number of tables file and index files that have a current files size of 1.99GB. My Oracle crashes about three times a week because of a "Write Fault/Failure. I've detemined that the RDBM is trying to write a index or table files > 2GB. When this occurs it crashes.
I've been reading the Oracle knowledge base that it suggest that there is a fix or release of Oracle 10g to resolve this problem. However, I've been unable to locate any fix or release to address my issue. Does such a fix or release exist? How do I address this issue? I'm from the world of MS SQL and IBM DB2 and we don't have this issue. I am running and NTFS files system. Could this be issue be related to an Windows Fix?
Surely Oracle can handel databases > 2GB.
Thanks in advance for any help.

After reading your response it appears that my real problem has to do with checking pointing. I've included below a copy of the error message:
Oracle process number: 8
Windows thread id: 3768, image: ORACLE.EXE (CKPT)
*** 2008-07-27 16:50:13.569
*** SERVICE NAME:(SYS$BACKGROUND) 2008-07-27 16:50:13.569
*** SESSION ID:(219.1) 2008-07-27 16:50:13.569
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Can you tell me why I'm having issues with checking point and the control file?
Can I rebuild the control file if it s corrupt?
The problem has been going on since April 2008. I'm takening over the system.
Thanks

Share variable value between java script and jsp

Hi, Firends:
In my old web page I used a static array to hold a set of values, and now I want to use dynamic value from datbase.
I created a bean to process database data and return resultset value to an array string.
I convert my html page into jsp page, use "usebean" tag to call specific method, after done, how can I set the
resultvaule to my script variable?
It's urgent!! great thanks!

Hello,
Finally, the codes work! thanks for all the suggestion!
The most important is "J" need <%= tag too. and do not forget the double quotation mark ("") while assigning the value.
the code like following:
<jsp:useBean id="ArrayBean" class="myProj.BeanServices"
scope="page" >
</jsp:useBean>
<%! public String[] dataArray; %>
<%
dataArray = ArrayBean.getRecordsetReturn();
%>
<script language="JavaScript1.2">
var MCC = new Array(<%=dataArray.length%>);
<%for(int j =0; j < dataArray.length; j++){ %>;
MCC[<%=j%>]="<%=dataArray[j]%>";
<%}%>;
</script>
One more question:
I found on the web server, if I used the same file name (asp file and js file, html file is ok.), seems the server always used the old compiled codes ignoring the code already changed, even after re-complile. I have to change the file name again and again.
I worked on JDeveloper environment, it has a testing web server environment on my local, I am not sure if this situation will happen in the real server environment.
How can I make any new updates go into effect immidiately! Do you know web server has some configuration to handle this?
Thanks a gain!

Enable video file and image file thumbnails WITHOUT enabling thumbnails for other filetypes

Hello. I am new to Mac and pulling my hair out at some of the limited UI options
I am wanting my image-files and video-files to appear in Finder (desktop etc) as thumbnails
However, I DON'T want PDFs, Excel, Word, PowerPoint files to have a preview thumbnail
Basically how things are now either way, it's very cumbersome visually to distinguish between file-types while cruising around my folders with a quick glance.
if thumbnail previews are on for all, its hard to tell at a quick glance which are PDFs, Excel files vs. images
similarly, the little "pdf" or "xlsx" or "docx" text overlay on these previews is so small and non-color coded as to be useless for quick-glance recognition of which filetype
if thumbnails are off, it's impossible to glance at files in a folder and know which image or video each is without wasting my precious miliseconds clicking on them, or trying to actually read truncated filenames
Here are some possible solutions which I hope somebody knows how to do:
globally enable or disable icon previews by filetype (preferred)
stipulate adding overlayed mini icons to certain filetypes
example: if it's a pdf, show the icon preview, but overlayed on that would be the red Adobe pdf icon/logo roughly a quarter of the size of the file icon (like is possible in Windows 7).
this way image and video previews can be seen at a glance, but having a big red or green or blue logo makes for immediate recognition of filetype
(least prefered but could help) ...somehow change the font color and increase the font size of the overlayed "pdf" "xlsx" "doc" "pptx"currently standard on these filetypes while showing icon preview but ALL are miniscule black text no matter which filetype
I'm quite dumbfounded right now that something for better immediate-glance filetype recognition isn't standard, or at least easily Google'able. All I've found is the Either/Other bamboozle.
Would love it to hear of a solution for this. Thanks all.

Put all of your separate flash movies into one move, and then
use flash to
load the movies into a top section of the flash document.
Your site (this page) sounds like it would be best viewed
entirely in Flash
(at least easiest w/o reloading).
Jon
"zachmundy" <[email protected]> wrote in
message
news:earmgn$q95$[email protected]..
>I have a bunch of flash videos that i've created
thumbnails for. I have
>one
> big cell on the top of the page that displays a video
and a bunch of small
> cells below that hold the thumbnails and descriptions of
other videos.
> When a
> user clicks on one of the videos, I want it to load that
video into the
> large
> cell on the top of the page all without
regenerating/refreshing the page.
> Is
> this possible in dreamweaver? What do I need to code the
thumbnail
> buttons to
> do in order to make this happen?
> Thanks
>

Sql server data file and log file

hello experts
what is the best way to save data file and log file in a two node cluster environment. i have an active\passive cluster with windows server 2008r2 enterprise and sql server 2008r2. i am new to the environment and i noticed that all system and user databases
including their data and log files are stored in one drive, just curious, what is the best practise in such kinds of scenario, thank you as always for your help.

Make sure you have valid/tested backup strategy for both system and user databases.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Variable interplay between include files and parent files?

Similar Messages

Maybe you are looking for