Variable issue in crystal report

Hi Experts,
I hope you are doing the good job and i developed the BEX report which is developed 3 variables , one of the variable is in navgational attribute and remain 2 attributes in char which is working fine  and we developed the crystal report on top of bex query  its working fine after that  as per requirement i changed navgational attribute and variable .Now the crystal report is not showing the variable prompt which i build on Nav attribute.So plz pass your inputs on this issue.
Regards
RK

Dear Kumar,
Thank you very much for you reply and we using the below mentioed details.
Exact version:4.1,support pack/service pack:sp3,patch level of CR:0
SAP BI:7.3
Regards
RK

Similar Messages

  • How to assign a variable value to crystal report viewer formula with CR2008

    Hi ,
    I am using crystal reports 2008 and i am not able to find how to assign  variable value  to crystal report viewer formula.
    In CR 8.5 , i used to have crystalreport1.Formulas(0) = variable1
                                             crystalreport1.Formulas(1) = variable2
    but, i don't find similar kind  in crystal reports 2008.
    How can i achieve the same functionality using crystal reports 2008.
    Thanks in Advance
    Regards,
    Ramnath

    Hi,
    Can i anyone help me out with this.
    I am generating crystal reports in vb6 using CR 8.5 and vb6 and below is the code snippet for the same
    CrystalReport1.Formulas(0) = "PrintTitle= '" & strMyTitle & "'"
    CrystalReport1.Formulas(1) = "FromDate= '" & MskFromDate.Text & "'"
    CrystalReport1.Formulas(2) = "ToDate= '" & MskToDate.Text & "'"
    Please let me know how the same functionality can be achieved in VB.Net using Crsytal reports 2008
    Any code snippet would be of great Help.
    Thanks in Adnvance.
    Ramnath

  • Text justification issue in crystal report

    Hi,
    I have MVC application with crystal report in it. I am exporting crystal report to PDF, everything except text justification (as we do in MS-Word) is not working. Even in crystal report viewer itself it's not working.
    I have been trying since few days to solve text justification problem in CR. Well I have goggled a lot for this and found different available option to get the thing done. But that didn't solved my problem, I have read many replies on the crystal report discussion regarding the same but no result. I have tried four different versions of crystal report (13.0.5,13.0.6,13.0.9,13.0.13) as I found on the web that justify could work in these versions, but I was shocked when I didn't get anything useful.
    For me it's like justify doesn't work in crystal report by any means. Can any one here tell me who has solved the text justification problem in crystal report. I have attached sample screen shot of word document where in I have specified my requirement of text justification.
    Any positive reply would be highly appreciated.
    -Sunny

    Duplicate thread - Locked. Please continue discussion here:
    Re: Text justification issue in crystal report
    -Abhilash

  • Out of Memory issue in crystal report 2008 SP1

    Hi ALL,
    I am facing serious issue in crystal report 2008 SP1.
    When i am click the page setup in crystal report 2008 ,it is prompting like "Out of Memory".
    Because  of this i am not able to see the default printer in the page setup.
    Please give the suggestions to resolve this issue.
    Thanks and Regards,
    Vinay

    Hi Ed,
    What printer are you using as your default printer?
    What happens if you change your default printer to Microsofts generic print driver? Only as a test to remove the printer being the cause.
    Also, Go into Page Setup and check on Dissociate Printer..... and see if that fixes the issue.
    Also, include all your OS version and patch level, Status of DEP, anti-virus turned off ( disconnect from your network while doing this test ) and Windows Firewall or any third party firewall and close all other software running.
    Thanks again
    Don

  • BW Hierarchy node Variable - Value help Issue in Crystal Report

    Dear All,
    1. We have created the BW-Query with Hierarchy node Variable .
    2. On the above query we have preapred Crystal Report.
    3. We have published the Crystal Report using BW Publisher ( Through Content Administrator in BW).
    4. Followed the steps as below link.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements
    Problem:
    When we are accessing the Crystal Report in the InfoView BW-Hierarchy node variable is not appearing in the value help as a tree structure ( It is appearing as a list ).
    Please suggest me the solution.
    Thanks & Regards,
    Kiran Manyam.

    Classic Crystal Reports and Classic SAP connectivity questions
    Classic Crystal Reports and Classic SAP connectivity questions

  • Issues viewing Crystal Report XI from vb6 application

    Hello,
    I'm trying to create a report interface in vb6. I'm using crystal reports XI. THe issue I'm having is that I'm getting error 91 - Object variable or With block variable not set at this line in my code :
    CrystalActiveXReportViewer1.ReportFileName = ReportPath . This is baffling me because as far as I can see, I've selected all of the relevant references.
    So if anyone has any ideas, please suggest.
    Mel T

    Hi,
    Try this link for VB6 application. [HOW TO OPEN AN EXTERNAL CRYSTAL XI REPORT IN VB6|http://pscode.com/vb/scripts/ShowCode.asp?txtCodeId=67374&lngWId=1]
    AND
    [Crystal Reports XI with Visual Basic 6.0|http://www.vbforums.com/archive/index.php/t-438828.html]
    Regards,
    Clint
    Edited by: Clint T. Pauyon on Feb 12, 2009 4:10 PM

  • Formula Issue in Crystal Reports 8.5

    Hello, I am having an problem figuring out an issue I am having with a formula in Crystal Reports 8.5. What is happening is if there are 2 or more records on a specific table, the formula does some weird things. Basically what is happening, is the formula works, but if there are more then 1 record on the table, it double, or add numbers twice. Here is an example:1st record has two value, value 1A = 63.36, value 1B = 197.132nd record has one value, value 2A = 23.10So on the first pass, it takes 1A plus 1B plus 2B and sums them and loads that to a variable. Then because there is a second record, it takes the variable which now has a value of 284.19, adds the variable value back into itself for a total of 522.18 and then adds value 2A for a total of 545.78.
    What I need it to do is only run through the formula once to get the value of...
    This topic first appeared in the Spiceworks Community

    What product are you using to schedule the reports?
    Ludek

  • Performance Issues with crystal reports 11 - Critical

    Post Author: DJ Gaba
    CA Forum: Exporting
    I have migrated from crystal reports version 8 to version 11.
    I am experiencing some performance issues with reports when displayed in version 11
    Reports that was taking 2 seconds in version 8 is now taking 4-5 seconds in versino 11
    I am using vb6 to export my report file into pdf
    Thanks 

    Post Author: synapsevampire
    CA Forum: Exporting
    Pleae don't multiple forums on the site with the same question.
    I responded to your other post.
    -k

  • Add in to SAP B1 issue in crystal report

    Hi Experts,
    Am using sap business one 9.0 PL 11 in my Local system. and using Crystal Reports 2011. I created some Layouts and imported to SAP. Now, I opened again the same from SAP to Edit. When am using Add-ins -- save / save as, that's showing an error. (Attaching the screen shot below). I checked for a solution in forum and all. There are some old discussions and followed some methods like re-installation and all but not helped anything to solve my issue.
    So please help me to get out of this issue.
    Fahis T

    Hi,
    karthi keyan I downloaded 2013 and installed..but still facing the same issue.
    Nagarajan, am not asking about the issue with ADD On..My issue is about ADD IN function in Crystal report which is not working. Every time i need to save as RPT file in system, then i need to import the same to SAP. I can't save directly to SAP.
    Its very urgent. please provide me a proper solution.
    Thanks
    Fahis T

  • How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

    I have developed the small windows based application tool with help of  Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
    The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
    Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D. 
    The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
    The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends.  If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
    Database objects and crystal report objects are properly used in the tool. The object release commands properly  communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool.  Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
    The memory consumption will be reduced once the server restarted or kill the application.
    Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
    Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
    Could you please suggesst how to avoid the memory consumption keep increasing and  how to release the memory consumption  once the crystal object disposed???

    Hi Don..
    My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
    Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
    Our client is using a application to help to print their reports. The application is developed with Windows service.
    Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock  report) which designed for clients need and the reports will be printed from printer. 
    10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running.  Memory cosumption of application will be 160 MB in business hours.
    For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB  in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
    On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday.  The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
    Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process".  If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
    From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that  application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
    Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
    the memory.
    Crystal report 2008 Serive Pack 2 setup installed in the server. 
    As you said, If Crystal report runtime is not released from memory then memory consumption keep increase???  In service oriented architecture application, how to unload the crystal report runtime??
    Do you any fix for this kind of issue??
    Willl Crystal report 2008 service pack 3 help on this issue??

  • Issue in crystal reports in client machine

    my project is running fine on development machine where i have installed visual studio 2013 and i later installed CRforVS_13_0_10 to add crystal reports feature ... i developed an application and used sql server for database ...
    when i run this software on client pc , my project is working fine except crystal report , when i want to view crystal report it gets busy in loading crystal report later it gives message
    "Failed to open the conenction , Details : [Database vendor code: 17] temp_ ....."
    on client machine i have installed CRRuntime_32bit_13_0_9

    i think i caught my problem but could not able to solve yet , my issue is that in development pc i set database of crystal report by selecting proper database linked to sqlserver ...
    later when i run my project in some other pc (i change pc name in my app.config file),
    and then the project runs but not crystal reports
    crystal report does not find database as its pc name is different , whereas pc name which is hard coded is the name of development pc ...
    how to change this pc name ????

  • Formatting and alignment issues in Crystal Reports when exported to PDF

    Hi Experts,
    When we export the crystal reports 2013 reports to PDF we are facing issues with formatting and alignment. The columns are overlapping and also for some column's data, we are able to see only some parts of text when exported to PDF.
    Data source for these reports is EHP 7 (SAP ECC 6.0), BO 4.1, Crystal reports 2013.
    As these reports are on priority, your help and suggestions are much appreciated.
    Looking forward to hear from you guys.
    Thanks & Regards,
    Vijay.

    Hi Vijay,
    Search for the following in the search bar at the top right of SCN's page:
    ForceLargerFonts
    UsePrecisePositioningForText
    TruncationAdjustment
    All these are registry keys that you might need to apply on the machine.
    -Abhilash

  • Oracle 10g olap cube connectivity issue using Crystal Reports 2008

    Hi
    Kindly help me out with a solution. I have created a cube in oracle 10gR2 database using Oracle Analytic Workspace Manager. I am trying to connect to this cube using Crystal report Olap datasorces. But I am only getting 4 options to connect to Hyperion Essbase, HOLOS Cube, Microsoft OLEDB, Microsoft OLAP Analysis Services 8.0 and 9.0.  I am not getting any option for connection to Oracle OLAP. How do I do that or if it does not support kindly let me know.
    Thanks in advance
    Troyee

    Hi Troyee,
    I have discussed the issue with OLAP engineer and he told me that connectivity to OLAP cube is not supported.
    and please next time address OLAP questions to the following category:
    Expert Forums » Business Objects » Other Business Objects Products
    (see the relevant category description)
    Vitaly Izmaylov
    Crystal Reports Design forum moderator

  • Issue with Crystal Report export to PDF

    Have a report in Crystal Report 2008. The report runs fine, but would like to export it to PDF/EXCEL, but nothing happens when I select the Export type(i.e. PDF,Excel, etc).
    Steps to replicate:
    1. Run Crystal Report
    2. Click on EXPORT button.
    3. Select the Export type (PDF).
    4. Click on EXPORT - Nothing happens nor does it return any error.
    Would someone be able to provide some tips on this issue
    Thanks

    The problem is that the 3rd party is using some CR SDK. We don't even know what SDK that is. They should be coming here and asking us to help them on your behalf. It is almost impossible for us to help, not knowing how they implemented the SDK, which SDk, etc..
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Issue with Crystal Report Server

    Hi,
    I have a .Net application that uses Crystal Reports Server. The application runs from two servers through load balancing and one of them hosts RAS(Report Application Server) component as well. The issue I am facing is that the server that does not host RAS gives a timeout error periodically when reports are run, inspite of RAS running fine in the other server.
    Can anyone let me know if this problem has been identified before?
    Regards,
    Ashwin

    Hi Ashwin,
    What is the error message you are getting?
    After how many minutes does the timeout error occur?
    What is deployed on each of these 2 servers?
    Can you please provide some more details on the workflow that causes the timeout?
    Thanks
    Jonathan

Maybe you are looking for