Variable length argument lists

What is their point? I can't see any.
If we have
void xyz (String ... strings)why can't we just use an array of Strings instead?

What is their point? I can't see any.
If we have
void xyz (String ... strings)why can't we just use an array of Strings instead?You could. It's just basically a convenience factor, so that you can invoke it like this:
xyz("one", "two", "three", "four");
instead of:
xyz(new String[] { "one", "two", "three", "four" });

Similar Messages

What is the proper way to javadoc a variable length argument list

What is the proper way to javadoc a variable length argument list?
Lets say I have the following function:
public void foo(Integer... intArray){
}I am just not sure how I would doc that, well, is there anything special I should note?
Thank you for your time,
Brandon

Same as any other argument. Name it and say what it's for.

Using Variable Length Argument in Constructor

Hi All,
I am tring to create class Address which represent Address of different people, However not all the information will be available for all the entries.I am thinking of using a Variable Length Argument in Constructor (String).Now I am unable to create a proper constructor as If few of the information say city is missing then how should the cons behave.Any help is highly appreciated.
Below is the class
package javaProg.completeReferance;
import java.util.*;
import javaProg.completeReferance.*;
public class Address
     private String name,address,city,pincode;
     public Address(String ...)
}

The problem with using a variable argument constructor here is that you don't know which of the pieces of information are being supplied. Var args is nice if the information being passed has a known "meaning", but may consist of an unknown number of parts (although it's little better than an array): but that's not what you have here.
If some of the arguments have sensible default values (even null) you could have something likepublic Address(String name, String address, String city, String pincode) {
    this.name = name;
    this.address = address;
    this.city = city;
    this.pincode = pincode;
public Address(String name, String address) {
    this(name, address, null, null, -1);
}(I'm treating pincode as an int by way of example.)

Ambiguity in variable-length arguments

I noticed by mistake that the following compiles:
    public int method(int x) {
        return 0;
    public int method(int ...x) {
        return 1;
    }I'd ahve thougth that it would't compile, because when there is 1 argument there is ambiguity. But it compiles and it works, if I use 1 parameter the first method is called, else the second is called.
I think that this thing is very error prone, I discovered this wondering why a varargs method didn't work as expected, and it was just that I had another method with the same name, analogous to the example I gave above.
Is this done purposely or is there a bug in the JVM?

Its not a bug. Java would every time try and call the
most specific method instead of generalized one. e.g.
see the code below. if you try and create an object
of this class passing null into the constructor, It
calls the String Constructor. Notice it has two
constructors: 1) takes String 2) takes Object
public constructorTest(String str){
System.out.println("String Constructor Called");
public constructorTest(Object obj){
System.out.println("Object Constructor Called");
}Is this similar to your problem ?
String is more
specific than Object and hence a call with null is
passed on to the most specific one that could take
this type.
r u sure ? bcoz i passed null as argument and got compile error "ambiguous reference"
>
IMHO this is analogous in concept to what you
observed.
Regards

Variable argument lists...

This might be stupid question, but is this possible in java? You know like in C++ how you could do this:
double average ( int num, ... )
va_list arguments;                     // A place to store the list of arguments
double sum = 0;
va_start ( arguments, num );           // Initializing arguments to store all values after num
for ( int x = 0; x < num; x++ )        // Loop until all numbers are added
    sum += va_arg ( arguments, double ); // Adds the next value in argument list to sum.
va_end ( arguments );                  // Cleans up the list
return sum / num;                      // Returns some number (typecast prevents truncation)
}

varargs are a new feature in java 1.5
http://java.sun.com/j2se/1.5.0/docs/guide/language/varargs.html

File Sender, Content Conversion - how to define variable length last field?

XI 3.0 SP17
With a File Sender communication channel, that uses Content Conversion - how do I define a 'variable length' last field?
The scenario - the input file has four fields, of which the first three are a known fixed length, and the last (fourth, trailing) field is variable in length.
Using a Message Protocol of 'File Content Conversion', how do I define that last variable length field (field name 'WOData' below) in the Content Conversion Parameters section?
My current parameters are:
Recordset Structure - Row,*
ignoreRecordsetName - true
Row.fieldFixedLengths - 1,12,5,99999
Row.fieldNames - WOType,WONum,WOLine,WOData
I've tried the following for 'Row.fieldFixedLengths' to no avail -
'1,12,5,*'
'1,12,5,0'
'1,12,5,'
'1,12,5'
The last two were grasping at straws )
The only thing I've got to work is specifying a 'large' value for the final field (99999 above).
In addition, does anyone know if specifying a large value (e.g. 99999) for the final trailing field will give rise to performance issues when the file is being processed?
In the help for "Converting File Content in a Sender Adapter", it states -
<Begin Quote>
NameA.fieldFixedLengths
If you make a specification here, the system expects a character string that contains the lengths of the structure columns as arguments separated by commas.
If you also specify a separator for the columns, you must not add its length to the length of the columns.
This entry is mandatory if you have not made an entry for NameA.fieldSeparator.
<End Quote>
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

<< note that fieldFixedLengths will not take any wildcard entries like *. So in these case it is ideal to provide a maximum char length. But note that while the file is being created that many spaces will be created in your file !!! >>
Hi Shabarish,
Yes, no wildcard is the conclusion I came to, hence my maximum )
The message size did not increase by any 'blank padding'. When I look in [Message Display Tool (Detail Display)] 'Audit Log for Message: X' -
2006-10-17 18:22:42 Success Channel X: Entire file content converted to XML format
2006-10-17 18:22:42 Success Send binary file "X" from FTP server "X", size 103290 bytes with QoS EO
2006-10-17 18:22:42 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-10-17 18:22:42 Success Trying to put the message into the send queue.
2006-10-17 18:22:42 Success Message successfully put into the queue.
2006-10-17 18:22:42 Success The application sent the message asynchronously using connection AFW. Returning to application.
The input flat file in non-XML format was 92,132 bytes and the message payload into XI was 103,290 bytes.
My understanding is that trailing spaces are stripped from XML nodes.

CER for multisite variable length on-net dialplan customer

Hello -
I am working to deploy CER for a large customer. They have a CCM cluster supporting, as expmple, 10 sites with the following characteristics:
1. each site has 4 digit DNs
2. each site has it's own phone partition
3. sites have overlapping DNs
4. calling from one site to another requites "8" +"3 digit site code"
5. CCM 7.x;
6. CER 8.0
CER is populated with switches from multiple sites so therefore will have CER database entry for DN=4000 in site1, site2, and site 7.
Question are:
1. If site2, DN 4000 phone calls 911, how does CER associate this caller with ERL2?
    - I am not sure what parameters are passed in the JTAPI messaging to the 911 CER Route Point to make this association?
    - assume the basics are signalled like calling/called numbers, but is additional info like mac address passed allowing CER to map ERL accurately
2. PSAP Callback
   -assuming ERL is mapped correctly on the outbound 911 call, if PSAP calls back and ELIN is routed back to CER properly ...
   - CER would perform callback using ELIN<=>Phone cached mapping
                  o hence CER would send JTAPI call request to CCM for x4000
                  o x4000 exists in 3 partitions
   - if I have the CER911 CTI Route Point CSS populated with each sites phone partition, it would seem that CCM would incorrectly ring the first partition listed that contained x4000
SRND for variable length onnet design has section on CER but nothing of value (at least that I could find).   Same with the CER docs.
Any guidance here would really be appreciated.
Thanks
Andy

So, while the switchport is pecified and used to populate the CER db, that is all done before any call is made. At that point, CER has DN, MAC, IP,...
Correct, you build CER configuration to your design
Phone makes 911 call, and at this point, CER has to tie this "inbound call" to a phone in the database. That association has to use information from the JTAPI messaging which I assume to be standard compliant. I could be way off here because we just did a test where a phone, defined in CER using switch port, was matched up properly even though I totally changed the callerid on 911 call (i.e. phone dn=4613, phone translation for 911 prefixed changed to 1111 so CER sees calling num=1111). This callerID was not stored anywhere in CER database but it did match up the correct zone. I have no idea how. JTAPI must pass in mac/IP which CER uses.
For outbound call, when phone dials 911 and the call is routed to CER via CTI RP, CER maps this call to a phone that dialed 911 through discovered DN from the Switch via SNMP/CDP, it then identifies which port the phone is connected to, looks at what ERL is assigned to the port and uses next available ELIN on that ERL to mask ANI to it and route it to CUCM. CUCM routes the call via Route Pattern to CUCM with the modified Caller ID.
When the call drops and 911 agent needs to call back, they dial the ELIN DID, call is routed to CUCM, matches translation pattern that routes the call to CER via another CTI RP (usually 913XXXXXXXXXX), CER sees the call coming in with ELIN and checks internal db for who last called out using this ELIN, and extends the call to that phone DN, it keeps that relationship for up to 3 hours after the call was made.
HTH, please rate all useful posts!
Chris

*REC Error - missing ) after argument list

Hi all,
Please note the following code
*XDIM_MEMBERSET P_ACCOUNT = 50100010.FOB.FC
*XDIM_MEMBERSET P_PCA = <ALL>
*XDIM_MEMBERSET P_CUSTOMER = P_DUMMY
*XDIM_MEMBERSET P_MONTH AS %DUMMY_MONTH%= 2011_DUMMY_MONTH
*XDIM_MEMBERSET P_MONTH AS %MONTHS% = BAS(2011.TOTAL)
*XDIM_MEMBERSET P_BUDGET_MODEL AS %BUDGET_MODELS% = BAS(2011.TOTAL)
*XDIM_MEMBERSET P_VERSION AS %VERSION% = 10
*LOOKUP COLMOBIL01
*DIM P_CURR_FROM="%P_BUDGET_MODEL%.CURR_FOB"
*DIM P_EXCH_RATE_TYPE="%P_BUDGET_MODEL%.EXCH_RATE_FOB"
*DIM P_CURR_TO="ILS"
*DIM P_ACCOUNT="P_DUMMY"
*DIM P_PCA="9999999999"
*DIM MEASURES="PERIODIC"
*FOR %S_MONTH% = %MONTHS%
*DIM LK_%S_MONTH%:P_MONTH="%S_MONTH%"
*NEXT
*ENDLOOKUP
*WHEN P_ACCOUNT
*IS 50100010.FOB.FC
*FOR %S_MODEL% = %BUDGET_MODELS%
*FOR %S_MONTH% = %MONTHS%
*REC(EXPRESSION=%VALUE%*LOOKUP(LK_%S_MONTH%), P_ACCOUNT=50100010.FOB.ILS)
*NEXT
*NEXT
*ENDWHEN
When I validate it, I receive a message:
LINE 0 syntax error: " missing ) after argument list"
When I delete the *REC line, the validation is OK.
Any idea why do I get this message?

Hi Gersh,
I am sorry if I have not been lear. The script passed validation. The "." is not in the name of the variable but in the values of the dimension. My Budget models IDs were YYYY.MODEL1. I have an attribute called MODEL_NOYEAR, which includes the characters to the right of the ".". When I used it and only inside the LOOKUP added the year it worked fine.
My Time dimension has the same issue, It is defined as YYYY.MM. Again, in your last proposed script, you have cycled over a property, which only includes the period number. This gave me the idea.
I know that the REC needs the ( without spaces. Took me one night to find this out....:(
Now, after I have passed validation a new challenge arrived.
Basically each Budget Model has 2 properties. One is the Exchange Rate Type and the other is the currency of purchase. The LOOKUP should be accessing another application based on the Month and the two properties of the model.
It suddenly struck me that the script is not good since the lookup is not bringing the values.
I have tried the following versions:
1. Straight forward version - use the name of the propery of the calling dimension. Did not work.
*DIM L_%SMDL%_%SMNTH%:P_CURR_FROM = P_BUDGET_MODEL.CURR_FOB
2. Use the value of the calling dimension "." the propery name. Did not work
*DIM L_%SMDL%_%SMNTH%:P_CURR_FROM = 2011_%SMDL%.CURR_FOB
3. I have created a variable that should hold the value and then used it. Did not work.
*LOOKUP COLMOBIL01
*DIM P_CURR_TO="ILS"
*DIM P_ACCOUNT="P_DUMMY"
*DIM P_PCA="9999999999"
*DIM MEASURES="PERIODIC"
*FOR %SMDL% = %BUDGET_MODELS%
*FOR %SMNTH% = %MONTHS%
*DIM L_%SMDL%_%SMNTH%:P_CURR_FROM = %CF%
*DIM L_%SMDL%_%SMNTH%:P_EXCH_RATE_TYPE = %ERF%
*DIM L_%SMDL%_%SMNTH%:P_MONTH="%BY%.%SMNTH%"
*NEXT
*NEXT
*ENDLOOKUP
*WHEN P_ACCOUNT
*IS 50100010.FOB.FC
*FOR %SMDL% = %BUDGET_MODELS%
*FOR %SMNTH% = %MONTHS%
*SELECT(%CF%, CURR_FOB, P_BUDGET_MODEL, "ID = 2011_%SMDL%")
*SELECT(%ERF%, EXCH_RATE_FOB, P_BUDGET_MODEL, "ID = 2011_%SMDL%")
*BEGIN
*REC(EXPRESSION=%VALUE%*LOOKUP(L_%SMDL%_%SMNTH%), P_ACCOUNT=50100010.FOB.ILS)
*END
*NEXT
*NEXT
*ENDWHEN
I can not escape the feeling that somehow I do not understand the way the BPC is handling the data and how and when it calculates variables and defines them.
Any idea how do I perform the lookup based on the property values?
Thanks,
Avihay

Orphaned Group Headers in Variable length Subreports.

I have a report is composed of a number of subreports that each have 3 nested groupings. I am trying to figure out how to keep the subreports from printing GH1 on a page when GH3 will not fit on that same page of the main report. I have read the knowledgebase articles and forum posts about preventing widowed headers when your results are in the details. Unfortunately, for the purposes of our reports, these do not apply because we have to put our "details" data in GH3 and supress the actual Details section. As a further complication, I cannot uncheck "Repeat Group Header On Each Page" or check "Keep Group Together" for GH1 within the subreport because it is appropriate for these headers to repeat most of the time and each subreport is of variable length and keeping the group together could leave too much white space between subreports when the each GH1 has to start on a new page. For similar reasons, I cannot use "Keep Object Together" on the subreport.
Any help is appreciated.

Post Author: hamish_sco
CA Forum: General
In Design View, right-click on the group header area on the left of the screen (in CR10 it is grey and has a list of page sections - RH, PH, D etc)Choose 'Change Group' optionOptions tab - Tick the 'Keep Group Together' option.When I did this I also had all the 'Keep Together' options in the Section Expert unchecked. This may or may not make a difference.CheersHamish

Single user mode: Argument List is too long, PLEASE HELP

Hey guys,
I recently posted a topic asking if any1 knew how to delete all png files on the desktop,
Nt many people replied,
But anyway, I did some research and now I know how to do it,
but in single user mode (cmd + S),
When I typed in rm *.png
While I ws on the desktop in single user mode,
It came up saying Argument list too long,
Does any1 know how to fix this,
Plz reply ASAP,
& if possible addme on Skype mark.davidson19, it wld b extremely helpful

If there are too many files expanded via the *.png wildcard, then the argument list length maximum can be exceeded. The last time I checked, Mac OS X had a 256K line length limitation. (AIX was 1M, Linux 128K, Solaris 1M, Windows 8K (Cygwin env) - your mileage may vary with each operating system release).
If you have too many files to expand on the command line, then you can delete them in batches. There are several ways to do this
cd ~/Desktop
rm [a-m]*.png
rm [n-z]*.png
rm [A-M]*.png
rm [N-Z]*.png
Or finer increments.
You could use something like
find ~/Desktop '*.png' -print0 -depth 1 | xargs -0 rm
And you can also use
find ~/Desktop '*.png' -depth 1 -delete
This being a Unix environment, there are most likely a dozen additional ways to delete all the .png files and avoid command line length limits.
As MrHoffman says, using rm and wildcards is a very dangerous thing to do unless you really REALLY know what you are doing. If not, I strongly suggest having a recent full backup handy. I actually suggest a backup regardless of how good you are in the Unix environment (I have multiple via different backup utilities preformed on a very regular basis; years of experience has taught me you cannot be too careful with your data - it is worth far more than the cost of backup equipment).

Is it possible to declare method with non-finite argument list ?

Hi, everyone,
Is it possible to declare method with non-finite argument list
and to read values of these arguments inside this method ?
I'm not talking about main() method (i know it can), but
values to this method are passed through array. That won't do
do for me.
If it is possible, could someone show an example how to do this.

void method(Object[]o)
for (int i=0; i<o.length; i++)
if (oinstanceof Integer)
System.out.println("is is an integer: "+o[i]);
else if (o[i]instanceof Point)
System.out.println("is is an Point: "+((Point)o[i]).x+"/"+((Point)o[i]).y);
else if (o[i]instanceof String)
System.out.println("is is an String: "+o[i]);
if you call it like
method(new Object[]{new Integer(123), "Hello!", new Point(100, 200), "goodbye!"});then the method will output:
is is an integer: 123
is is an String: Hello!
is is an Point: 100/200
is is an String: Goodbye!
this is as powerful as varible parameter counts like in c, and it it typesafe.

How to use datamerge with variable lengths of text?

Hello,
I'm looking for a way to automaticly format brochures from a database . I allready found out that datamerge lets you do this quite easily. But I encounter a problem when I use large amounts of text.
How I see it, the only solution is to reserve enough space for the larges text in order to make all of the text appear in the document. But this leaves large open spaces and even blank pages in my document when I deal with less text.
Is there a way to make the document adapt to the amount of text? So that Indesign creates more space for large amounts of text and erases blank pages when there is less text?
Maybe Datamerge isn't the right solution for my problem, I'm open to suggestions.
Thanks in advance!
Iris

I'm just finishing up a directory that I build with data merge and I have the problem of variable length business descriptions, as well as some have extra mailing addresses or websites. My solution is to do it in several steps with multiple files. I do a normal merge first (and I use a single record per page for this, but only bcause that allows me to create some alphabetical lists of business names and owners's names that I can key to a listing number), then I stitch together the individual stories into a single text thread that I copy/paste into place in the final document. If you have a lot of frames, Rorohiko.com has a nifty text stitch script that will help.
One tip that helps with this method is to be sure you have a paragraph break at the end of each story so stiching the frames together maintains your paragraphs.

Bank statement: problem to load variable length field

we have many bank accounts with different banks, and we would like to use the bank reconciliation module to do bank reconciliation.
we have problem in load the MT940 bank statement. All these banks are providing so called standard SWIFT940 format, which not able to give fixed length field.
we have problem on line 61 which have a lot of variable length fields.
line 61 comprise of 7 fields, which are:
A) Value date - fixed 6 chars.
B) Entry date - fixed 4 chars.
C) Credit/debit - variable 1-2 chars.
D) Fund Code - fixed 1 char
E) Transaction amount - variable 15 chars
F) Transaction code/type - fixed 4 chars
G) MID, cheque#, BIS - variable 16 chars
How can we write the SQL Loader script if there is no delimiter, and the start position of the fields are not fixed?
we can load A and B easily, but C onwards we will have problems.
please help.
INTO TABLE ce_stmt_int_tmp
WHEN rec_id_no = '61'
TRAILING NULLCOLS
(rec_no RECNUM,
rec_id_no POSITION(1:2) CHAR,
column1 POSITION(4:9) CHAR,
column2 POSITION(10:13) CHAR,
column3 ??
column4 ??
column5 ??
column6 ??
column7 ??
------

Hi Linda,
As said by gupta, please check, whether the bank statement has the statement 62F:
If not, please get the statement again from bank and ensure that the end statement 62F exists in the statement..
This will help you to overcome your problem..
Regards,
Praisty

Changing a variables length for text input in Captivate 6

I am using eLearning CS6 (non-subscription I believe, but no one at my office can confirm) and use a machine where all software is deployed via push from IT. The ability to check for updates has been removed from me.
I need to be able to have users enter data into the course and have it both be forwarded on to our database AND appear in later segments of the course.
I recall being able to update the TEB variable length in previous versions but can not find the option anywhere in CS6. or perhaps I'm imaging it.
I am running version 6.0.1.240 and there is no Format option in my TEB properties. I do not see alignment options, and instead see Characters as a menu above the Shadow & Reflection option.
I do know where to set the value in a text caption box. However, I seem to be limited to entering a single variable in the caption field in order for this to be option. However, there are times where we'd rather have multiple variables strung together on a single line, or a word or two of static text appearing before or after the variable.
If I want to string the user entered data from multiple variables into a single caption box there appears to be no way to change the variable's character length from 15 to a higher value.
Does anyone know of another way to work around this other than through the use of multiple caption boxes?
I've been driving myself a bit batty trying to think of a way around the 1 caption 1 variable limit...
Thanks.
Note: Please don't advise me to upgrade. I've already been told the office will not pay for an update to the software so quickly on the heels of our upgrade from CS 5.5 to CS6 (happened within a 6 month span).

15 characters is the default when you insert the variable into a text caption. But you can set this to anything from 1 to about 250...as long as you use the Insert Variable icon in the Properties tab > Format accordion to insert the variable. Look for the field in the dialog that allows you to specify the variable's display length.

Problem in sending a variable length string

Hello friends,
I have created a scenario as follows.
Our
Application ==>(SOAP) ==> XI ==> (RFC) ==> SAP TABLE.
I am sending a record with one of the fields of the type 'VARILRAW'
When I send this, it is sending me a response that it was inserted in the table succesfully, But when I try to retrieve, all fields get returned correctly, but not this variable length field. This sends me back a huge string of letter 'A's.
Here is what I see on SXMB_MONI
The following shows that for insertion, the proper data is coming in XML format.
===============================================
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:ZBAPI_ADD_CONFIG_DNA xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
- <CONFIG_DNA_DATA>
<CONFIG_ID>4607.1164846986188077.494</CONFIG_ID>
<STRING_NAME>USC1</STRING_NAME>
<STRING_FORMAT>TXT</STRING_FORMAT>
<STRING_VALUE>ONE,TWO,THREE,FOUR</STRING_VALUE>
<OBJECT_NAME>TEMP</OBJECT_NAME>
</CONFIG_DNA_DATA>
</ns1:ZBAPI_ADD_CONFIG_DNA>
=================================================
When I try to search for the same data again using the Key field CONFIG_ID,
I am getting back the following. Notice that all fields are coming back with right data but for STRING_VALUE, which is coming as a long string of As
====================================================
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:SEARCH_CONFIG_DNA_RESPONSE xmlns:ns1="http://cincom.com/config">
- <RETMSG>
<RETURNMESSAGE>1 Records found</RETURNMESSAGE>
<SUBRC>0</SUBRC>
</RETMSG>
- <CONFIG_DATA>
- <item>
<CONFIG_ID>4607.1164846986188077.494</CONFIG_ID>
<STRING_NAME>USC1</STRING_NAME>
<STRING_FORMAT>TXT</STRING_FORMAT>
<STRING_VALUE>AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA</STRING_VALUE>
<OBJECT_NAME>TEMP</OBJECT_NAME>
</item>
</CONFIG_DATA>
</ns1:SEARCH_CONFIG_DNA_RESPONSE>
========================================================
Any help will be greatly appreciated.
Thanks
Ram

go to RFC and insert a BREAK-POINT and check what do you receive in the field. if you receive same you send so its a problem of SAP Team.
try this

Variable length argument lists

Similar Messages

Maybe you are looking for