Variable not appearing for User

Hi everyone!
I have a query which the user have been using for quite some time and it was working fine. When the query is run the user has option of 3 input variables.
Today, all of a sudden, the 3rd variable does not show up for that user. The query runs fine for every other user. I mean all 3 input variables show up.
Some how only for this particular user, the 3rd variable does not appear.
Has any one encountered this situation. Can any one provide me some possible areas to look into as to what might have changed or what could be causing this problem.
All your help is appreciated.
Thankx!
Kumar.

Hi Raj,
I did try to remove the personalization on the user's system. But the variable still did not appear. I noticed few more things. The variable is "Site ID" (custom one).
1) The  Site variable does not appear even on other queries only for this user.
2) I tried to make the user use another system and run the query, it still does not appear.
3) I created another query for user just to display the Site ID without any variable. It runs fine. When I created a selection variable for Site ID on the same query now the variable again does not appear.
So I think it must be either a change in authorization or change in definition.
Can you think of any other issue it might be encountering?
Thankx!
Edited by: kumar saurabh on Aug 25, 2008 4:50 PM

Similar Messages

  • Responsibility not appearing for user after added from System Administrator

    Hi,
    I'm testing on R11510. After adding more responsibilities to a user from system administrator -> user -> define, logout and login to the user, the new responsibilities didn't show up. Anything I missed?
    Thanks for your help.

    Hi,
    Did you try to bounce Apache and see if it helps?
    Please see the suggested solutions in the following threads.
    Responsibility not appearing
    Re: Responsibility not appearing
    Assigned Responsibility Not Visible on Login through AppsLocalLogin.jsp
    Re: Assigned Responsibility Not Visible on Login through AppsLocalLogin.jsp
    Regards,
    Hussein

  • New class created not appearing for users

    Hi Friends
    I have created a Course and then the offering for that course. I created a class as well for that offering. While creating the course I selected the organization in the learner access. The course is future dated in February.
    However when an employee from that organization is searching for that course it does not appear. The class is in Planned state. My EBS is 12.1.3. Any idea why this class is not appearing when the learner is searching for that class.
    Also another question when I select the organization in the learner access and include all the orgs in the hierarchy, does it mean that all the orgs under that org will be included in the learner access.
    Thanks in advance

    Hi,
    The process you have described sounds right. You should contact Oracle Support, they will be able to help you find out what is missing.
    The answer to your second question is "Yes".
    Regards Anders Northeved

  • Why does one tag out of four not appear for users accessing a single Thunderbird account via multiple computers?

    Four users share a single Thunderbird email account (version 24.5.0) on their four respective computers. Each user is represented by a tag color to designate which emails they are responsible for. One user is having trouble seeing when their tag is used by the other three users, the email appears untagged. However, the other three users see it as tagged. Likewise, when that one person uses the tag, the other three cannot see the email as being tagged. This is not an issue when the other three tags are used between the four people.
    We have checked that we are all using the exact same color to represent the tag, and that we are all using the same IMAP settings. Does anyone know why this might be happening?

    Are you sure the odd one out is IMAP? sounds like it is pop to me.

  • Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
    and my version of Photoshop is CC.
    I ran into  the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount  from the Blur Tools slider. thank you.

  • ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS"

    While calling dbms_stats.seed_col_usage I got the following error. Can someone help me on how to resolve it
    sqlplus
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Apr 14 14:37:38 2011
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Enter user-name: / as sysdba
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select * from v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    SQL> show user
    USER is "SYS"
    SQL> begin
    2 dbms_stats.seed_col_usage(null,null,400);
    3 end;
    4 /
    begin
    ERROR at line 1:
    ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS".
    ORA-06512: at "SYS.DBMS_SQLTUNE_INTERNAL", line 17379
    ORA-06512: at "SYS.DBMS_STATS", line 28451
    ORA-06512: at line 2
    Thank You
    Sarayu

    According to the documentation:
    SEED_COL_USAGE ProcedureThis procedure iterates over the SQL statements in the specified SQL tuning set, compiles them and seeds column usage information for the columns that appear in these statements.
    Syntax
    DBMS_STATS.SEED_COL_USAGE (
    sqlset_name IN VARCHAR2,
    owner_name IN VARCHAR2,
    time_limit IN POSITIVE DEFAULT NULL);>
    It looks like you need to provide a SQLSET_NAME and OWNER_NAME to use this procedure correctly, to which you've provided NULLs. I don't see any exceptions in the documentation that indicate special processing when NULLs are provided.

  • AED not appearing for utilization

    Hi all
    I am reposting the question having hopes of getting replies..
    A similar question asked in this forum has also been included.
    This particular case is for import trading scenario
    Purchase Order is made in MM and during MIGO excise invoice is captured.Addnl CVD value 4% will be taken as AED.The same can be displayed in transaction J1IG.
    Client has the requirement of displaying AED in J1IJ while capturing the excise invoice created during MIGO itself i.e, during goods inward as the same will be considered for RG23D reporting purposes.
    But AED (Addl CVD 4%) is not being displayed in J1IJ for depo sales.
    Also there is no field called as AED for capturing the same in J1IJ,but there are additional fields TAX1 and TAX2 in J1IJ.
    BED,ECS,SEcess is transferred from J1IG to J1IJ but not AED
    Awaiting all your useful feedbacks to display AED in J1IJ
    similar question posted in the forum on Jul 8..
    AED not appearing for utilization-Urgent  
    Posted: Jul 8, 2008 4:01 PM           
    Click to report abuse...      E-mail this message      E-mail this message             Click to reply to this thread      Reply
    Hi All,
    I am having input credit available for AED whereas the payable amount is not there for AED. So I want to utilise this AED amount against other payable amounts but this AED credit balance is not showing for utilization. When I have checked for other plant where AED payable is available then the AED input credit is also showing for utilization.
    I have checked the CIN settings: In excise registration details for the plant, the Liable to AED option is ticked and under Account determination settings--- RG23 AED account has been assigned to UTLZ ETT.
    Can anybody please suggest that what other settings needs to be done or is there any specific settings for cross utilization which I might have missed out on.
    Thanks & Regards,
    Antima
    any inputs guys...........
    Rgds
    Shashidhar

    Hi,
    If i am correct you are referring to ADC (Additional Customs duty) in case of imports. This duty value is similar to AED (In screens it will be in AED column only) but in customization you will be using subtransaction type "IP" to differentiate AED from ADC, you need to maintain G/L accounts for Excise transaction types and subtransaction type IP, so that the duty values are passed on to those G/L accounts.
    Cheers,
    Santosh

  • RECEIVER: ERROR: Access to requested resource is not authorized for user

    Hi,
    I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
    http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
    Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
    when i try to access the Source.html protected with siteminder, I get the following error in the Destination Domain Shareid Log file:
    ERROR - [http10113-Processor3] - RECEIVER: ERROR: Access to the requested resource is not authorized for user uid=username, ou=People, dc=xyz,dc=com
    Please help me to solve this issue?
    Note: When the resource is accessed directly, siteminder authorizes the same user.

    We also occationaly have this error.  See my log for an example :
    Transaction completed successfuly for DocEntry = 54358 : In company FIXTHISPLEASE on 3/2/2010 9:48:49 AM
    Transaction completed successfuly for DocEntry = 54365 : In company FIXTHISPLEASE on 3/2/2010 10:24:55 AM
    Transaction completed successfuly for DocEntry = 54403 : In company FIXTHISPLEASE on 3/2/2010 12:14:53 PM
    -5006 - The requested action is not supported for this object. for DocEntry = 0 : In company FIXTHISPLEASE on 3/2/2010 1:38:45 PM
    Transaction completed successfuly for DocEntry = 54424 : In company FIXTHISPLEASE on 3/2/2010 2:40:44 PM
    Transaction completed successfuly for DocEntry = 54425 : In company FIXTHISPLEASE on 3/2/2010 3:01:51 PM
    Transaction completed successfuly for DocEntry = 54426 : In company FIXTHISPLEASE on 3/2/2010 3:03:41 PM
    Transaction completed successfuly for DocEntry = 54427 : In company FIXTHISPLEASE on 3/2/2010 3:05:12 PM
    As you can see from 9:48am to 3:05pm, one occurance of this error occured.  And they say that the transaction was
    tried a few seconds later and it worked.
    the STARTTRANSACTION() and ENDTRANSACTION() are used by the DI API so I'm really in the blank about this error and it starts to anoy the customer.  Their SAP is 2007 SP01 PL08
    Any concrete ideas about this ?

  • Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • The option to extract pages from a PDF document as described does not appear for me.

    Im currently running Acrobat Pro XL and the option to extract pages from a PDF document as described in the below tutorial does not appear for me.  Please help!
    Extracting pages from a PDF
    https://acrobatusers.com/tutorials/extracting-pages

    Typically if the extract feature is not present then the application is not Acrobat Pro.
    Be well...

  • 2013 Custom Web Parts in Page Layouts not showing for users

    Custom Web Parts in Page Layouts not showing for users
    I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
    I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
    The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
    The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
    What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
    Any help would be appreciated, Havent found anything on this issue online. weird.

    It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
    John Architect

  • In the packing list, batch number and expiry date is not appearing for a ma

    Dear Friends,
    I have an issue in the packinglist.
    In the packing list, batch number and expiry date is not appearing for a material.
    But in the delivery the batch number and expiry date is appearing.
    Why this has triggered and how to solve this?
    With regards

    Hi Vamsi,
              Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
    Regard's
    Murali.

  • Could Not Proxy For User

    I try to use Methods Proxy from the Object API, but I got this error : "Could Not Proxy For User", my client version is 7.0.3 . With the Novell Groupwise Client I can access to the proxy account.
    Any idea of what to do to fix this problem ?

    here is a simplify version of my code (Delphi) :
    function TclsGWise.GWConnect(bWait: Boolean=True; bOpen: Boolean=False): Boolean;
    _vGWApp := CreateOleObject('NovellGroupWareSession');
    _vGWLog := _vGWApp.Login;
    _vGWAddresslist := _vGWApp.ProxyHistory;
    end;
    procedure TclsGWise.GWSetProxy(iPos : integer);
    begin
    if iPos > 0 then
    begin
    _vGWLog := Unassigned;
    _vGWLog := _vGWApp.Proxy(_vGWAddresslist.item(iPos));
    end;
    end;
    The problem occur when I Call the procedure GWSetProxy.
    Thanks in advance for your help.

  • Print Screen not working for user but working for Administrator

    Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
    09-14-2009 11:25 AM
    Hi I am new to this forum and am asking for your  help.  We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users.  We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work.  I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution .  Thanks in Advance .

    Jerry, that post you just answered was from nearly 4 1/2 years ago!  And that's the last time the OP was here.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Java.sql.BatchUpdateException: ORA-01027: bind variables not allowed for da

    Hi guys, I m facing a problem while executing below query .Query is working fine in toad i don't know what is the issue with the code
    <code>
    String url3 = "CREATE OR REPLACE VIEW Table2(PERIOD, YEARS, COST_CENTRE, S_DIR_PERM, S_DIR_CONT, S_INDIR_PERM, S_INDIR_CONT, O_DIR_PERM, O_DIR_CONT, O_INDIR_PERM, O_INDIR_CONT)AS select period, year, cost_center, sum(s_dir_perm), sum(s_dir_cont), sum(s_indir_perm), sum(s_indir_cont), sum(o_dir_perm), sum(o_dir_cont), sum(o_indir_perm), sum(o_indir_cont) from ( select b.period, b.year, a.cost_center, sum(a.perm_dir_hc) as s_dir_perm, sum(a.contract_dir_hc) as s_dir_cont, sum(a.perm_indir_hc) as s_indir_perm, sum(a.contract_indir_hc) as s_indir_cont, 0 as o_dir_perm, 0 as o_dir_cont, 0 as o_indir_perm, 0 as o_indir_cont from ZVHR_ACT_HC_ASOF_FISPRD a, pertable b where to_char(as_of_date, 'mm/dd/yyyy') = b.ENDPERIOD and shift not in ('G','N','O2','O7') and b.endperiod = ? group by b.period, b.year, a.cost_center union select b.period, b.year, a.cost_center, 0 as s_dir_perm, 0 as s_dir_cont, 0 as s_indir_perm, 0 as s_indir_cont, sum(a.perm_dir_hc) as o_dir_perm, sum(a.contract_dir_hc) as o_dir_cont, sum(a.perm_indir_hc) as o_indir_perm, sum(a.contract_indir_hc) as o_indir_cont from ZVHR_ACT_HC_ASOF_FISPRD a, pertable b where to_char(as_of_date, 'mm/dd/yyyy') = b.ENDPERIOD and shift in ('G','N','O2','O7') and b.endperiod = ? group by b.period, b.year, a.cost_center) group by period, year, cost_center";
    PreparedStatement statement3 = connection.prepareStatement(url3);
    statement3.setString(1, "12/10/2008");
    statement3.setString(2, "12/10/2008");
    statement3.addBatch();
    statement3.executeBatch();
    </code>
    i m getting the following error
    java.sql.BatchUpdateException: ORA-01027: bind variables not allowed for data definition operations
    can any1 help me with this.

    Can you explain what you are trying to do from a business perspective?
    If you are creating a view, it doesn't make sense to pass bind variables to that DDL statement. The view definition itself is going to have to end up with hard coded date values there. So what possible benefit is there to using bind variables?
    As an aside, if you are using bind variables and you have DATE columns, you really want to pass in the proper data type (i.e. setDate or setTimestamp rather than setString). Otherwise, Oracle has to do implicit string to date conversion, which depends on the session's NLS settings, which is likely to be different on different client machines and lead to all sorts of odd errors and behaviors down the line.
    Are you trying to build a view that takes parameters? If so, there are a few options for that sort of thing.
    Justin

Maybe you are looking for