Variable not getting updated by output from a PL

We have a PL that has the same xsd element as both input and output. So we used the same variable for both input and output operations while invoking this PL assuming that the output from the PL will overwrite the data already present in the variable.
But this is not happening rather the data is persisting in that the data that was there in the variable before the invoke is there after the invoke also and is not getting overwritten by the PL output data.Is there any properties to set to change this behaviour or will this not happen at all.

did you check the audit trail for the response data? can you please file a SR and upload your bpel processs? could you please post your sr number?

Similar Messages

Data is not getting updated in R3 from CRM

Hi All,
I have a small query pertaining to CRM Middleware.
We have extended the standard scenario using EEWB for sending few customer fields thru CUSTOMER_H. This is assigned to the adapter in R3AC1.
The data is getting populated in the structure correctly. But the problem is that the Z* field is not getting updated in R3. The more strange thing is that it is getting overwritten in CRM by data from R3.
I have checked the problem and found out that the updateflag for z* field is missing. But the problem is that I donot know, how to populate the update flag for the field.
Is there any customization or setting in EEWB for updating the flag?
Please help... Please let me know if u want more informaiton.
Thanks
Sanu

Sanu,
The reason for R3 data getting overwritten in CRM is because the BSS_CENTI has a blank record
and BSS_CENTIX structure might have a X indicator within BAPIMTCS structures.
BSS_CENTI holds central data for the customer and BSS_CENTIX holds the change flags for the fields in central data.
To fix this issue, you have to use CRM table SMOFSUBINT and configure a custom function module which basically yanks the 2 structures from BAPIMTCS table.
Note:- You do this ONLY if you don't want custom fields from ECC to update CRM. Otherwise you have to make sure the BSS_CENTI and BSS_CENTIX structures are consistent in CRM and ECC.

PO Vendor Email ID is not getting updated in PO Output Tab

Hello Experts,
We are facing any issue with the PO vendor email id.
Scenario: While creating the PO, we are mapping the vendor address (Like, Email, phone no, fax no .)From shopping cart which are custom fields of shopping cart.
And these address details getting flowing to PO while creating PO.
And we can see the updated address in partner details for the vendor.
But the issue is coming as, this email id and fax no has get update in the PO Output tab also. This is not working for only email id, where as fax no id getting updated in the PO Output tab.
Can you please check this and provide us a solution for this issue. Why only the email is not getting updated.
I noticed that, there is FM module which gets address details of the vendor BBP_OUTPUT_PO_PARAMS_GET from the memory which is not getting the correct details
Seeking your help.
We will appreciate if somebody can provide us solution for this issue.
Thank you,
Bharathi.
Edited by: Latha V on Feb 11, 2009 10:01 AM

Hi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

Hello JinxUK,
Thank you for the details of the issue you are experiencing with the iCloud Control Panel. I found an article referencing the error message you are getting:
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
I recommend saving that link so that you can check back for a resolution when it becomes available.
Thank you for using Apple Support Communities.
Best,
Sheila M.

SMC not getting suggested patch info from Update Manager in Solaris 10

Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance.

Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance.

Hi, i m not getting updates in app store from long time...

Hi, i m not getting updates in app store from long time...

Hey harjit lal,
Are you able to connect to the iTunes Store to update your apps? If you're unable to connect to the Store and that's what is holding it up, then I would run through the troubleshooting in here:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Another solution might be that your applications are automatically updating in the background after upgrading to iOS 7.
Turn off automatic downloads. Tap Apps in Automatic Downloads. Apps update automatically over Wi-Fi, unless you turn off the option.
from: http://help.apple.com/iphone/7/#/iph64c6c9f05
Welcome to Apple Support Communities!
Regards,
Delgadoh

After updating I can not get over 1000 songs from my library to play. I spent 2 hours with Apple support and he could not fix it. Anybody got any ideas?

After updating I can not get over 1000 songs from my library to play. I spent 2 hours with Apple support and he could not fix it. Anybody got any ideas?

While not exactly the same, I wonder if this would help? http://support.apple.com/kb/TS1967

Matlab workspace not getting updated while labview mex file is running

Hi,
Let me start from the overview of the system for better understanding.
The system is to acquire data from a DAQ6070e using labview 7.1 . this data is then to be used in matlab for processing. All this needs to happen in real time hence the data is to be acquired from labview and outputted into matlab in real time.
in order to do this we generated the labview and the matlab codes seperately. After days of hard work we managed to import the labview vi into matlab using a math interface toolkit, but now have run into another interesting problem.
the workspace in matlab is not getting updated during the time the labview vi is running inside matlab. it only updates after the vi has run . for example if i need to monitor the system for 300 seconds then ideally the labview vi should output the samples for each acquisition and output it to matlab, what actually is happening is that the labview keeps running for 300 seconds without outputting any data during those 300 seconds and only outputs the last set of acquisition values at the end of the 300 seconds. Which beats the purpose of the whole program.
Kindly help
Regards
Manuj

Thanks Mate,
What you said about "MEX file will not be able to "store" data between runs" ,i realised in the morning. as a result i dont think your suggestion of for loop will also be effective as labview mex file will not acquire data during matalb code execution and vice versa.
Hence i have decided to do it the other way...we will now try to run the matlab code in labview.
this leads to other problem
As this is a real time operation i need to find out a way of storing the data into computer memory and then reading from it(when i say memory i do not mean writing it to a file and readin from it as that is slow) becasue i think the buffer i am specifying in my AI config is not big enough.
I was thinking maybe i should use a RT FIFO queue but then i have not been able to find out the difference between buffer memory and fifo memory. ie is buffer memory supposed to be the ram memory or is it the hard disk memory?
I am posting the vi here for easy understanding
All help is very much appreciated
Attachments:
RT-loop2ver21.vi ‏231 KB

Processing log not getting updated for send immediatly

Hi,
I have a custom output type and a Custom function module for issueing the output for delivery, my prob is that it processing log is getting updated for the send in batch and other options but it is not getting updated for the SEND IMMEDIATLY, I am using the same FM for the Output issue I am checking if they have selected output type as 4 if yes, I am calling a FM in perform by saying
PERFORM xxxxxxxx ON COMMIT
and in the perform I am calling a FM
CALL FUNCTION xxxxxxxxx in BACKGROUND TASK AS A SEPARATE TASK,
the functioanlity of issueing the output is working but the Processing log is not getting updated.
What might be the problem ? it is getting updated for Send in batch but not for except 4.

I am updating Log using this form
at every step I am collecting the messages and passing them to this form.
FORM update_nast_log USING   p_msgid
                              p_msgnr
                              p_msgty
                              p_msgv1
                              p_msgv2
                              p_msgv3
                              p_msgv4.
* Local data declaration
DATA: lv_msgid LIKE sy-msgid,
        lv_msgnr LIKE sy-msgno,
        lv_msgty LIKE sy-msgty,
        lv_msgv1 LIKE sy-msgv1,
        lv_msgv2 LIKE sy-msgv2,
        lv_msgv3 LIKE sy-msgv3,
        lv_msgv4 LIKE sy-msgv4.
* clear all the local variables
CLEAR:lv_msgid,
        lv_msgnr,
        lv_msgty,
        lv_msgv1,
        lv_msgv2,
        lv_msgv3,
        lv_msgv4.
* move message ID,number,msg type and the messsages
*     to local variables
MOVE: p_msgid TO lv_msgid,
        p_msgnr TO lv_msgnr,
        p_msgty TO lv_msgty,
        p_msgv1 TO lv_msgv1,
        p_msgv2 TO lv_msgv2,
        p_msgv3 TO lv_msgv3,
        p_msgv4 TO lv_msgv4.
* Update nast table using nast protocol update
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
    EXPORTING
      msg_arbgb = lv_msgid
      msg_nr    = lv_msgnr
      msg_ty    = lv_msgty
      msg_v1    = lv_msgv1
      msg_v2    = lv_msgv2
      msg_v3    = lv_msgv3
      msg_v4    = lv_msgv4.
ENDFORM.                    " UPDATE_NAST_LOG

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Data is not getting updated in CRM

HI experts,
I am updating the new address and postal codes in ISU.And now if I check these address for buisness partner in CRM. Its not getting updated.
why this is happening?
Is there any BDOC used in this case then how we can check that BDOC?
Thanks,
Jassi

Hello
I am sure that the problem occurs due to this.
You need to know the error message. To do this:
1) Choose any red document from transaction SMW01
2) Click on button "Show BDoc message errors/receivers" (9th button from the left)
3) In the opening window there is a button "Errors". There is where you can find the error message.
I hope it helps. Please, provide points if helpful.
Joaquin

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

Item text (BSEG-SGTXT) is not getting updated in Payment document generated

Hi All,
Item text (BSEG-SGTXT) is not getting updated in Payment document generated through F110.
After generating the payment document via Transaction Code u2013 F110, system is not updating the
Text field (BSEG-SGTXT) in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
In case of manual payment (F-53) we can input the text manually hence that will get updated in
payment document but this thing is not possible with F110.
How can I update it?
Is there any configuration for that?
Thanks
Daniel Dorta

Hi All,
I've applied the two notes as recommended. However, when I run FBL3N for payment run items, the Text field is update with wrong data, i.e. not from the Text field in FB60
Thus, I'll like someone to help me with what should exactly be done on the 'Step', 'Pre-requisite' and 'Substitution' side of the Substitution rule (TCode GGB1), I did not fill anything in the Pre-requisite box - is this right?
Thanx in advance.

Variable not getting updated by output from a PL

Similar Messages

Maybe you are looking for