Variable on TVARV table

Hello,
we have just upgraded to BI 7.0 and we have the following issue:
when I launch a query and I try to select a variable from TVARV value I don't find this option !
Is it deleted this option in the new Bi 7?
Thanks!

Thanks for your answer,
but when I run the query, I don't find the option for the Variable to select the TVARV value, is it normal?
Regards,
Laura

Similar Messages

Creating Variable in TVARV table via SM30

Hi Gurus,
             I need to create a variable in TVARV to hold the last EXecution TIME and DATe of my program.
I did it earlier in Development , now when i have to create it again in Quality for testing, its not geetting displayed via se11.
                                                                                date         time
          I created the variable form SM30 -- Maintain-- 'ZZZ' --- 20081202_112309
         Now when i goto se11 and check for contents its displaying my variable.
Can anyone suggest where am i going wrong , or perhaps wats the best practise to create a VArable in TVARV Table.
         Your suggestions are Deeply Valuable to me..
Thanking you,
ZIa

Hi Zia,
Please use transaction code STVARV to maintain TVARV variables.
Regards,
Rahul

Defining Selection variables for program variant, TVARV table Help - urgent

Hi All,
Can anyone tell me, what is the transaction to create new variables in table TVARV to use them in my variant for fiscal year and WIP period fields in selection screen of SAPKKA07 program.I used STVARV and it creates variables in table TVARVC table not in TVARV table and moreover in creating a variant the selection variables are defaulted as variables from TVARVC table as input help but not the variables in TVARV table however I see and understand different from SAP Help. The following is the link
http://help.sap.com/saphelp_47x200/helpdata/en/25/c966398ae5c13ae10000000a114084/frameset.htm
for selection variable creation.
Can anyone help me on this this is very urgent. Your help is highly appreciated
Thanks in advance
Kumar

Thanks Appana,
I know we can create the variable that way but, that is something hardway to do it. I want to go about it from transaction not meaning to update the table directly and moreover if I update the TVARV table directly as u said I still dont see the variable I created in the list I get on input help for selection variables while creating a program variant.
I hope u can suggest me better now.
Thanks
Kumar

Sort the Data Selection in TVARV Table

hello...i wanted to run a SAP Standard Program and it is have a variant selection for me to select the variable from TVARV table. When this program run, I would like to have a selection of choosing the latest date to run the program based on the variant I save. I created a variables in the TVARV table but I cannot see any selection which can sort the selection based on the latest date. I can only choose to be EQ and etc. Is there any selection that I can make so that the program always choose to be run based on the latest date? thanksss alot!!!

Look at table VARID.
Rob

TVARV Table Variable Update

Hi All,
We have a requirement to add a new variable to the TVARV Table
I am able to do it thru SM30.
This variable is used in a variant in a program that runs periodically.
the new variant shd be similar to 1001_CURR_MONTH_START_DATE
now the month and the year shd change based on the fiscal period we are in.
The option I have found is to write a program to update the TVARV table and run this program before running the actual FI program.
But there are other variables that seem to be getting updated and I did not find any programs updating them,
So is there some other way that I can update the date in the variable other than the program approach
Appreciate your help.
Thank you
Lalitha

Best option is through program update , but one thing you need to do is change the TVARV table technical settings. you need to switch off the buffer i.e. select buffering not allowed. Then write a FM or program to update the entry.
Ex:
update tvarv
set low = value " your value
where name = name " your variable name
and type = 'P' " or 'S'
and numb = 0.
I am using the same solution ..
Regards,
Sunil

Update TVARV table entries using a Function Module or Program

Hi Gurus,
My requirement is that I have a entry in TVARV table which has a 'low'. We would like to change this value whenever we desire. We are unable to do it via sm30 and se16 as table maintenance access is not permitted in Production environment.
Can you please provide any Function module or program code to do it?
Requirement - User can enter a value into TVARV table by executing a function module or program
Thank you all, will award points,
Priyansh

Hi Priyansh,
Please refer to SAP Help for more information on variant maintenance and more specifically variable values in variants. You can use t/code STVARV for maintaining the variant variables in table TVARVC (Client-Specific Variant Variables).
Note: I suggest to use the TVARVC table instead of TVARV.
If you are looking for Function Modules in the area of Variant Maintenance, then please have a look at Function Group SVAR (t/code SE80).
If you are looking for Function Modules in the area of User Variables in Variants, then please have a look at Function Group SVUV (t/code SE80).
Furthermore, if you are looking for a program to update table TVARVC, please have a look at ABAP: Dynamic Variant Processing with STVARV.
Best eregards,
Sander

TVARV table

Hi,
I've a report where there is the field Year.
If I save a variant the next year system will propose 2011 when that variant will be manually selected.
I would like the system will update automatically the value of the year.
I don't know how to do that by TVARV table
Best regards

Using TVARV (TVARVC)
First create a periodic (daily) job (or ask basis to) that executes standard report RVSETDAT, this report will update some values in TVARV (and TVARVC on more recent versions) (*)
Then in your variant use variable RV_ACTUAL_YEAR (Read [Using Variables for Date Calculations|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/98039be58611d194cc00a0c94260a5/frameset.htm] in [Variable Values in Variants|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/980398e58611d194cc00a0c94260a5/frameset.htm])
Other solution
Fill the field with SY-DATUM(4) in INITIALIZATION block, and in the variant definition, check the box "Save field without values" (Read [Variant Attributes|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/frameset.htm] in [Variable Values in Variants|http://help.sap.com/saphelp_nw04s/helpdata/en/c0/980398e58611d194cc00a0c94260a5/frameset.htm])
Regards,
Raymond
(*) You could also create a copy of the program in your namespace (Zxxx, Yxxx, etc.) and maintain your own variable

TVARV table entries

Hello folks,
I am just wondering how to code a select statement on a tvarv table with ranges.
To be clear, I had created a variable with name ZTEST and then I clicked on the YELLOW arrow on the right and entered 10 numbers from 1 to 10.
Now I have a report with a selection screen field 'p_num' and in that report I am coding the SELECT statement on tvarv in the following way.
select single *
from tvarv
into ls_tvarv
where name eq 'ZTEST'
   and low eq p_num.
Is this correct. p_num can have values anywhere between 1 and 10.
Will the above code work if p_num is 1 or 2 or 3 up to 10??
Please let me know.
Thanks,

Hi
Your record in TVAR it should be:
TVAR-NAME = 'ZTEST'.
TVAR-TYPE =
TVAR-NUMB =
TVAR-SIGN =
TVAR-OPTI =
TVAR-LOW   = 1
TVAR-HIGH = 10.
In your code:
DATA: MIN TYPE I, MAX TYPE I.
SELECT * FROM TVARV WHERE NAME = 'ZTEST'.
MOVE: TVARV-LOW TO MIN,
      TVARV-HIGH TI MAX.
EXIT.
ENDSELECT.
IF P_NUM < MIN OR P_NUM > MAX.
ERROR.
ENDIF.
Max

Is there any STD prog which update Table TVARV-Table of VAR in SEL Cre

Hi ,
Can any one tell me which STD program will be used to update the Table TVARV (Table of Variable in selection cretria ). Or this table should be updated manually ? .Please kindly let me know .
Thanks & Regards,
Veera

Hi Veera,
TVARV table has allowed maintanace status and Maintanace view is available for the same.
So go to transaction SM30 and maintance the Table as you required.
Thanks
Nimesh S. Patel

How to find out list of variants in TVARV table

hi!
can anybody can guide me on the following issues? plz
How to list all variants in TVARV table?
How to find out any Z* programs that writes to TVARV table, using the variant name?
How to find out the programs which are reads the TVARV data into a program variant?
Thanks & Regards,
vijay

Or some help might be useful:
http://help.sap.com/saphelp_47x200/helpdata/en/c0/98037ae58611d194cc00a0c94260a5/frameset.htm
Regards,
Subramanian V.

How to insert the data which is present in the variable into the table

Hi,
Let's consider that I have one table and I have stored the table column names in one variable and their values in another variable.
I want to insert the data that is present in the variables into the table.
I tried the following way :
Declare
V_columns    Varchar2(50) := 'Empno';
V_values       Number(10) := 101;
Begin
Insert Into Emp (V_columns) Values (V_values);
End;
The above procedure gives an error : PL?SQL : ORA-00904 : "V_COLUMNS": invalid identifier
Using the Execute Immediate, we can insert the data which is present in the variables into the table.
Is there any other way to insert the data which is present in the variable into the table..?
Can anyone please give me the solution..?
Thanks..

plz use this...
DECLARE
   v_columns   VARCHAR2 (50) := 'Empno';
   v_values    NUMBER (10)   := 101;
BEGIN
   EXECUTE IMMEDIATE    'Insert Into Emp ('
                     || v_columns
                     || ') Values ('
                     || v_values
                     || ')';
   COMMIT;
END;

Passing value to bind variable of another table from one table

hi,
I have a multi select table. When one row is selected from this table (no button is clicked, only selection is done), an attribute from that selected row (say userid) should be passed to the bind variable of another table and the corresponding details of that particular userid should be displayed in the other table. When more than one row is selected, the other table should display no rows.
My main problem is what code has to be written to pass value to bind variable and where it should be written.
Please give me a detailed explaination as soon as possible.
Thank you.

Sorry, didnot add this. The table is multi select table.

Export - Import In ABAP ( for variables and internal table)

how can we pass value for the variable and internal table using Export and Import?
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
data: var type sy-uzeit.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var,sy-subrc,sy-uzeit.
i found var value 0 while importing.
what is the right syntax for passing value of variable and internaltable.
regards,
dushyant.

Hi,
There are two possible solutions.
Solution1:
Program1.Should be run before atleast once so that TIME should be filled.
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
Program2.IF the TIME is filled,then only it will produce the result.
data: var type sy-uzeit.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Solution2:
Single program:
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Kindly reward points by clikcing the star on the left of reply,if it helps.

Create a variable in one table based on a value on another.

I have two existing tables, say TABLE1 and TABLE2. I need to create a key variable in TABLE2 and insert values for that variable from TABLE1 i.e. create an explicit relationship between the tables using a key variable. There exists a relationship
between the tables in that for each record in TABLE1 there are 28 records in TABLE2 and the records are arranged in sequential order. So:
TABLE1 TABLE2
REQUIREMENT
RECORD 1 -->
RECORDS 1 to 28 Copy key variable from RECORD1 in TABLE1 into RECORDS 1 to 28 in TABLE2
RECORD 2 -->
RECORDS 29 to 56 Copy key variable from RECORD2 in TABLE1 into RECORDS 29 to 56 in TABLE2
RECORD 3 -->
RECORDS 57 to 84 Copy key variable from RECORD3 in TABLE1 into RECORDS 57 to 84 in TABLE2
RECORD n--> RECORDS (n-1) * 28 + 1 to n * 28
Copy key variable from RECORD n in TABLE1 into RECORDS (n-1) * 28 + 1 to RECORDS n * 28 in TABLE2
Please help if you can. I am prepared to give any additional information when asked.

TABLE1:
USE [LFS_APRIL_2015]
GO
/****** Object: Table [dbo].[HOUSING37854] Script Date: 04/30/2015 15:52:37 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[HOUSING37854](
[BatchNo] [float] NULL,
[District] [float] NULL,
[URBAN_RURAL] [float] NULL,
[HHNUM] [float] NULL,
[Cluster] [float] NULL,
[Final_Result_Code] [float] NULL,
[zBarcode] [float] NULL,
[Person_NUMBER] [float] NULL,
[HH1] [float] NULL,
[HH2] [float] NULL,
[HH6] [float] NULL,
[HH4] [float] NULL,
[HH3] [float] NULL,
[HH5] [float] NULL,
[HH7] [float] NULL,
[HH8] [float] NULL,
[HH9a] [float] NULL,
[HH9b] [float] NULL,
[HH9c] [float] NULL,
[HH9d] [float] NULL,
[HH9e] [float] NULL,
[HH9f] [float] NULL,
[HH9g] [float] NULL,
[HH9h] [float] NULL,
[HH9i] [float] NULL,
[HH9j] [float] NULL,
[HH9k] [float] NULL,
[HH9l] [float] NULL,
[HH9m] [float] NULL,
[HH10a] [varchar](1) NULL,
[HH10b] [varchar](1) NULL,
[HH10c] [varchar](1) NULL,
[ED_Number] [float] NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
TABLE2:
USE [LFS_APRIL_2015]
GO
/****** Object: Table [dbo].[LISTING37854] Script Date: 04/30/2015 15:47:15 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[LISTING37854](
[HL1] [float] NULL,
[HL3] [float] NULL,
[HL4] [float] NULL,
[HL5] [float] NULL,
[HL6] [float] NULL,
[HL7] [float] NULL
) ON [PRIMARY]
GO
Essentially The Housing table, TABLE1, lists households and the Listing table, TABLE2, lists members of the household and there are always 28 lines in the Listings although most of them may be just a number since almost no household will have 28
members. The Listings that is jut a number will be deleted, but to know where the listing for the next household starts I need to create the linking variable in Listings table. The is absolutely no doubt that the relationship that I specified
in the first post above is as specified.

System Variable For Internal table count

Can anybody tell me what the system variable for internal table count?
I just wants to know how many recoreds are there in my internal table ?
Regards,
pandu.

Hi ,
DESCRIBE TABLE <itab> [LINES <l>] [OCCURS <n>] [KIND <k>].
If you use the LINES parameter, the number of filled lines is written to the variable <lin>. If parameter, the you use the OCCURS value of the INITIAL SIZE of the table is returned to the variable <n>. If you use the KIND parameter, the table type is returned to the variable <k>: T for standard table, S for sorted table, and H for hashed table.
using variable
SY-TFILL
After the statements DESCRIBE TABLE, LOOP AT, and READ TABLE, SY-TFILL contains the number of lines in the relevant internal table.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3798358411d1829f0000e829fbfe/content.htm
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 4:53 PM

Variable on TVARV table

Similar Messages

Maybe you are looking for