Variable over time caracteristic with conversion routine Peri6
Hello,
we've created a interval variable over a time characteristic which uses peri6 as a conversion routine (the infoobject used is 0UCMOVEOUTM). We're trying to manually fill the upper interval of the variable with the 12.9999 value, but it throws an format error (Please enter value in permitted format for variable / BRAIN 627). The value 12.9999 exists in the sid table of the charracteristic...Any other variable value works.
Do you have any clues why it's not working?
Thanks,
Tudor
A bit difficult to track, isn't it? ^_^
I searched the web, and found this article by Burleson
http://www.dba-oracle.com/t_ora_03120_two_task_conversion_routine_integer_overflow.htm
Only a suggestion: maybe the problem is (still) the endianness, but I can not figure out in witch component.
It can be in Spring or Hibernate or a number that is not "parsed" correctly.
On another forum, the problem was resolved by upgrading the client software to deal with UTF-8 (not your case I think.)
Bye,
Antonio
Similar Messages
-
I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?
Check here, if this can help:
http://support.apple.com/kb/HT4670?viewlocale=en_US -
Give me details about conversion routine like alpha
give me details about conversion routine like alpha and how many conversion routines are ther and their uses give detail
Hi Deba,
There are many Conversion routines...
ALPHA Conversion Routine
BUCAT Conversion Routine
EAN11 Conversion Routine
GJAHR Conversion Routine
ISOLA Conversion Routine
MATN1 Conversion Routine
NUMCV Conversion Routine
PERI5 Conversion Routine
PERI6 Conversion Routine
PERI7 Conversion Routine
POSID Conversion Routine
PROJ Conversion Routine
REQID Conversion Routine
IDATE Conversion Routine
Conversion Routine RSDAT
SDATE Conversion Routine
WBSEL Conversion Routine
Check this link for conversion routines and its types...
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/e9a20d3347b340946c32331c96a64e/frameset.htm
Hope this helps u...
Regards,
KK. -
Currency conversion with variable in selection mask with problems
Hi Gurus,
I want to implement a currency conversion as follows:
when the query is opened a selection screen should appear and the whole data which is with Euro currency should be possible to translate in USD, GBP, FRF (depends on which currency the user is choosing).
I did a conversion with a variable with default value USD but I am not able to insert multiple currencies like GBP and FRF as default value/ suggestion in variable.
I created a variable on 0Currency with following adjustments:
- Processing By: Manual Input/Default Value.
- Reference Characteristic (0CURRENCY) Currency.
- Variable Represents: Single Value.
- Ready for input: checked
- default value: USD.
With adjustment "variable represents" > "single value" it is not possible to insert two or three currencies as default value.
When changing "variable represents" to "multiple single values" or to "selection option" it is possible to insert two or three currencies as default value.
But when the variable is saved with "multiple single values" or "selection option" the variable doesn´t appear in currency translation type in tab currency when selecting target currency with option "target currency from variable".
Any idea why the variable doesn´t appear with adjustments with "multiple single values" or "selection option"?
Or any idea how it is possible to achieve my whished currency conversion?
Thanks in advance!Charlie Belt wrote:
saplaz-
> If I read your request properly, you would like to be able to translate values to any one currency at a time, from a possible list of currency. Remove the default value and whatever currencies are available in your RSCURR should be there.
That´s correct. I want to have a list of currencies in which it would be possible to translate. That means clicking in selection mask and the list appears.
That was my first thougth ... removing the default value. I removed the default value but only Euro (EUR) appeared in that list for selecting. I thought this has maybe something to do with the data which is available in the cube and that is only in EUR.
I will check the RSCURR and what kind of currencies are available.
cheers -
How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine. I am new to Apple and am trying to get all my stuff working together.
This is not a supported feature of iPhone or Time Capsule.
-
I ended up with 3 Apple IDs over time. How can I get it down to one account?
I ended up with 3 Apple IDs over time. When I sink my iPad, some apps won't sync because the app was purchased under a different account?
How can I get it down to one account and be able to sync all of my iTunes purchases (apps, music, etc.) on my iPad and iPhone?
This is driving me crazy! grrrr. :-)
I have .me; .mac and .icloud accounts.
- Dave
Running OS X 10.8.5 (Mountain Lion) on iMac, using iPad 4 (64GB) and iPhone 5.Thanks. I was afraid of that. Darn Apple....we use Apple products because they are elegant and easy to use, why can't apple simplify the ID issues??? :-)
Thanks for the reply. -
Conversion routine for time key figure
Hi,
i have a filed in datasource which has length 5 ( of numeric char ).it may be coz time can be represented as "hh:mm" which has of course of length 5.
this particular field is mapped to a key figure of type time ( which is only 4 numc ).
because of this mismatches transfer rules are not getting activated.
what i need to do now? is it neccessary to write a conversion routine again?if yes, can any body write here the code required for it?
thanks,
RaviHi Ravi,
Assuming time comes in 'HH:MM' , colon placed explicitly , Code should look like ...
bwtime(2) = r3time+1(2) .
bwtime2(2) = r3time3(2).
Where BW_Time stands for info object.
R3time stands for transfer structure field.
Normally time field is of type numc lenght 6 ( HHMMSS) and inthat case should not be any issue when used in BW system.
Hope that helps.
Regards
Mr Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal? Please someone give me a solution
Yes this is fairly normal. When you have wifi on the phone, it drains the battery life of the device.
Here is an article that has some tips that you can follow so you can modify the settings on your device to extend it's battery life to the fullest.
http://www.apple.com/batteries/iphone.html -
Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything. It was fast when I first installed, but over the last six mos has slown to a crawl.
upgrade your browser to Firefox 8 and try
* getfirefox.com -
I have a requirement where Iam haivng the Value as Input in CSV File for Time Feild as 12:00:00 A or 10:15:00 PM.
As per BW Standard Time feild object allows HH:MM:SS format .Hence, I need to know if there is any Solution to convert the Input Data into required BW Timefield Format as my Job is failing to upload through CSV File into BW.
Would appreciate your help in advance
Thanks
AshleyHey why are you asking the same question again ???
Time Conversion Routine- Help -
my mom somehow ended up with two totally different iTunes accounts, based on an old (dead) email address and a newer one as well. She's bought a lot of music on both accounts over time... is there some way to merge the old account into her newer one?
No. If one of those accounts is inaccessible, click here and request assistance.
(82012) -
Transforming Layers Over Time in Photoshop CS6 | The Complete Picture with Julieanne Kost | Adobe TV
Did you know that you can not only reposition but also transform images over time? In this Episode of The Complete Picture, Julieanne demonstrates how easy it is using the power of Smart Objects in Photoshop CS6.
http://adobe.ly/QQ13iDHello,
I'm actually trying to realize this type of manipulations, but with the Photoshop CS5 Extended edition. Unfortunately, when I convert my layer into a smart object I don't get the transformation option. Is there some way to do this with my version? -
Internet performance degrades over time with AirPort Extreme
Hello, we have an AirPort Extreme (802.11n) which is about two years old, and I've noticed lately that if I don't reset it for say, a month or so, internet speeds become extremely slow, and there is no way to regain normal speeds without resetting it... I was just wondering if this is normal for an AirPort Extreme, and also, could this be due to the age of the unit (i.e. do AirPort Extremes slowly lose performance over time, and is buying a new one the only answer)? Any help would be much appreciated. Thanks!
U have to find a good channel.
on 2.4ghz this is 6 unless other routers in the area are using it. if so use another channel.
Other things that can interfere: Microwave oven, frige - any thing that emits em fields
5ghz is better.
vicinity of your laptop makes a big difference - i get up to 57Mbps on speedtest net in vicinity of time capsule @ 5ghz.
Best performance is on ethernet cable.
Hope this helps -
Conversion routine PROJ in case master data doesn't exist
Hi gurus!
I have a problem with info-object 0PROJECT. It has a conversion routine PROJ, which converts the values nicely from external format to internal only if the master data for such project exists. If I use a interval variable in bex query the query user needs to give the upper value in internal value (for example Y3000 instead of Y-3000) in case he or she doesn't know if the value exists in database or not. That is understandable because of the logic of conversion routine PROJ (uses attribute project_ex).
But what explains the fact that query variable input value Y3000 doesn't give data of Y-3000, but only one smaller (Y-2999). To get data of project Y-3000 one has to give upper variable value Y3001.
Has anyone better understanding of this query/conversion behaviour?
SariCheck the example here
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/f470375fbf307ee10000009b38f8cf/frameset.htm
In master data updates, you can either load time-dependent and time-constant data individually, or together.
Hope it Helps
Chetan
@CP.. -
Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time.
When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.
Maybe you are looking for
-
Fasing some problem in Material using BAPI..?
Hi... Guru's.. thanks in advance and will give full points... I am creating material master using the BAPI and the data is in presentation server.... this is is the error message i am getting while control ebterinng into CALL BAPI(FM).... Key fields
-
My itunes on my iMac for the passed few weeks now keeps on comming with the message "This computer is no longer authorized to play purchased items that are on the iPhone. Would you like to authorize this computer for items purchased from the iTunes S
-
Iphone 5s small circle at left of camera what is it for?
Hi got a screen protector that said it was for iphone 5s but it doesnt feature 3 holes at top front for speaker camera-and what is the other little hole for? would a screen protector covering whatever it is interfere with it thanks?
-
Dear All, I am trying to use in condition JEXC (in Manaul excise), when I click the tax tab then JMOP value shall be replaced by JEXC value but its not happening Basic price of material P000 10000 In Manual condition JEXC 900 But tax calculation is s
-
[SOLVED] How to make sense of the Forms Client SOD Matrix ?
Hi, We have installed 10.1.2.3 app server and are using Jinitiator version 1.3.1.28 on Windows under IE 7. Before we did this I read the matrix, saw that IE 7 was certified with 10.1.2.2 and Jinit 1.3.1.28. I also noted the line stating "When a clien