Variable screen in Planning Function for Integrated Planning

Hi all.
I have created a planning application with the WAD, based on an Input_ready Query. Manual planning works fine and even planning functions go well, using the command wizard.
However, if I try to use a variable in a planning function and I set the parameter to pop-up the variable screen within the command wizard for a planning function, I get an 'uncaught exception'. An almost blank IE-window pops up which is supposed to display the variables, but it fails.
Does anybody know how to solve this?
Gr.,
Marc.

Hello Marc,
do you still have this error? I encountered the same problem with SPS 9. Maybe you should install at least SPS 10. The variable popup works correct there.
Best regards
Martin

Similar Messages

  • Use of forecast planning function in Integrated planning

    Hai ,
    Can I Know What is the use forecast planning function in Integrated planning.
    Give me One Example.
    Please tell What i hv to select in aggregation level, Filter, and Planning function for doing forecast.
    Regards
    Kishore.

    Hi,
    Filter is indeed used in IP similar to how planning package was used in BPS. There really is no difference 'conceptually'.
    What you have seen is the different options IP offers compared to BPS regarding planning function execution. You can execute planning function directly or using a planning sequence in an application (although in planning modeler, its only a planning sequence that can be executed, for eg., for testing purpose).
    If you just execute a planning function without specifying any restriction, it will operate on the entire set of planning data. Whether its a planning sequence or planning function, the data it operates on can be restricted by binding the various characteristics (or variables) using various DPs in the application. What kind of dynamic selection are you looking at?
    You can see following links if you have not read them already -
    http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f8dc73b56bede10000000a11466f/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/44/33a31fd463060ce10000000a155369/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f92373b56bede10000000a11466f/content.htm
    These are for WAD; you can find similar links for the BI Analyser.

  • Regading Variable in Planning function in integrated Planning

    Hello All,
    I have a requirement where i have to run a planning function to copy the data of one key figures to other.
    But i need a input screen before execution of this planning function where i could insert the characteristics values for which i do not need this Planning Function to be Executed.
    Please let me know how to do this.
    I think this can be done using input ready variables.But i m not sure.
    Regards,
    Pratighya

    Hi All,
    With regards to the above issue, I have similar question and appreciate any inouts.
    Used a Planning function - type FORMULA
    Function needs an Input parameter to execute.
    So I want to create a Planning IP variable and assign it to the function call in my formula.
    From the Front end WAD/BEX - want to exceute the planning function by passing inpur value.
    Regards
    Rao

  • Assignment of filter to planning function in integrated planning

    Dear experts
    I am a bit new in Integrated planning and have a following conceptual question regarding filter object in IP
    In IP it seems that filter is a substitute object for planning package in BSP.
    I however do not see any possibility to assign filter to a planning function except in a planning sequence. I would however imagine to have a functionality to dynamically select the filter when i want to execute a planning function via application (excel based or Web).
    It seems that filter is not even required if a planning function is executed seperately (not as part of planning sequence).
    I have tried to execute a simple copy function without having any filter at all and it works.
    Could someone pls. explain me as to the conceptual difference between object filter and object planning package.

    Hi,
    Filter is indeed used in IP similar to how planning package was used in BPS. There really is no difference 'conceptually'.
    What you have seen is the different options IP offers compared to BPS regarding planning function execution. You can execute planning function directly or using a planning sequence in an application (although in planning modeler, its only a planning sequence that can be executed, for eg., for testing purpose).
    If you just execute a planning function without specifying any restriction, it will operate on the entire set of planning data. Whether its a planning sequence or planning function, the data it operates on can be restricted by binding the various characteristics (or variables) using various DPs in the application. What kind of dynamic selection are you looking at?
    You can see following links if you have not read them already -
    http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f8dc73b56bede10000000a11466f/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/44/33a31fd463060ce10000000a155369/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f92373b56bede10000000a11466f/content.htm
    These are for WAD; you can find similar links for the BI Analyser.

  • Customised Planning functions in Integrated Planning

    Hi experts,
    i have a requirement in my project like this.
    i have 2 suppliers S1 ans S2 having data like
    S1             S2
    100           50
    if i change the value of S1 to 90 the difference of the value (100-90) needs to add to S2 i.e 5010.(the total of S1 and S2 should be constant i.e S1S2=150 in all cases).
    is there any standard Planning function to execute this scenario.please provide your inputs for this.
    Thanks in advance.

    Hi,
    i think there is a possible way of doing this even if the total ie S1+S2 is not know.guess the solution will be long to implement it. U can use it if its necessary.
    there is a paper on how t run planning functions on delta records.
    You need to implement this first.
    then create a planning function that has a condition for suppliers  s2 alone.Read the delta records of S1, multiply the value with -1 and add it to the value of S2.
    this way the total the relations can be maintained.
    Regards.
    Shafi

  • How to pass filter values to planning function in Integrated planning

    Dear Experts,
    I have a input ready query where the variables are filled with authorization objects by user. All variables are defined as multiple single values.
    I created a workbook with 3 filter dropdown box - calmonth, company code and version (displayed as text). In the filter drop down box the user selects the company code, version and calmonth for planning. I would like to pass the selected filter values to a planning funciton. How can we pass these selected single filter values to a planning funciton?
    Note: I am able to reference cells for variables that are not in filter (for eg: revaluation function with this document https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be).
    Thanks,
    Gnana

    Hi,
    Your requirement sounds similar to example given by SAP
    [http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/content.htm]
    If you do not want the from value be selected, and its already decided, then gofor restriction of values in filter than to the variable.
    regards,
    ravi.

  • Error logging for Integrated Planning

    Can I turn on error logging for Integrated Planning.  Users get errors and forget to screenshot it to me, so I have no way of finding out what their error was unless I get them to duplicate it.  It would be nice to look up a log of errors by user.  Do they have something like that in Integrated Planning?
    Thanks!

    Hi Dustin,
    Few comments :
    1. UPDATE TASK means that a new background task is create and the function is performed asyncronisly ,with that the user will not wait for the update of the DB to finish ,you can read in SAP help about CALL FUNCTION IN UPDATE
    2. Be aware that the table that you create will be extremely large in no time ,you will have to delete data on a regular basis
    3. The same concept of the thread can be applied to function module 'RRMS_MESSAGE_HANDLING' this function module is responsible of messaging in BEX 'some times IP related messages are invoked from it.
    Regards,
    Eitan.

  • Create a print button in webtemplate used for integrated planning - BI 7.0

    Heelo Guys,
    Can you please let me know how to add a print button in the web template which has a input query  and which is used for integrated planning. The user want to print the report.I haven't worked in web template and thought of asking you if there is any button or standard sap functionality I can use for printing the report . Thanks in advance for your help. We are in BI 7.0.
    Thanks
    Senthil

    Hello
    What you are experiencing is not clear for me, but in general you have to install the BI ABAP + BI java to have planning modeler working. Ensure that BI Diagnostics (note 937697) and also ensure that you have setup your system according notes
    919850 and  947376.
    I hope this helps.
    BR
    Lucimar
    Edited by: Lucimar Moresco on Oct 14, 2010 3:58 PM

  • BI IP --- Planning function for File Upload

    Hai All,
    In BI IP , When I am trying to load the data (text file) by using Planning function for File Upload. I am getting an error message When I am clicking on Update .
    Error Message : Inconsistent input parameter (parameter: <unknown>, value <unknown>).
    In Text file I am using Tab Separation for each value
    Anyone help me out.
    Thanks,
    Bhima

    Hi Bhima
    Try one of these; it should work:
    1. If you are on SP 14 you would need to upgrade to SP 15. It would work fine
    2. If not, then -
         a] apply note 1070655 - Termination msg CL_RSPLFR_CONTROLLER =>GET_READ_WRITE_PROVIDS
         b] Apply Correction Instruction 566059 [i.e: in Object - CL_RSPLFR_CONTROLLER GET_READ_WRITE_PROVIDS,
    delete the block: l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = p_infoprov ).
    and insert block - l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = i_infoprov ).
    Goodluck
    Srikanth

  • Forecast function in integrated planning

    In forecast function of integrated planning we need to fix forecast period time interval in tcode(RSRHIERARCHYVIRT). otherwise it will show error like
    "Forecast period doesnot fall with in F4 time interval" if we fix that in respective tcode mentioned above. then it will error free.
    But my doubt is we need to fix past period time interval also in the same tcode. because we need both forecast period and past period in forecast fucntion.
    How we can fix both at a time, i need to fix error urgent. pls help me
    I will assign very good points

    Hi,
    Please visit the link below
    link : [http://help.sap.com/saphelp_nw70/helpdata/EN/a4/42e03fc2269615e10000000a155106/frameset.htm]
    Please update the exact requirement.
    Thanks
    Pratyush

  • Any bapi avaialble to fetch component planned orders for header planned ord

    Hi Experts,
                     We have a req where we need to fetch component planned orders for  header planned order .
    In Detail :
      In MD4C tcode (select planned orders tab -> F8 ), when i pass the header planned order like 17474 .
      I get two component planned orders like 16276 16277 and corresponding materials like 12025185 , 12025189.
    We are using   BAPI_PLANNEDORDER_GET_DETAIL  to  fetch  component materials for a planned order .
    similarly any bapi or tables which have this data  to fetch component planned orders.
    Thanks in advance,
    Mani.

    Hope it would be helpful for you:
    Check these user exits.
    CO610001            User exits: Assembly processing                             
    M61X0001            User exits PP-MRP materials planning                        
    M61X0002            User Exits PP-MRP Material Requirements Planning Evaluations
    Thanks

  • Allocation Function in Integrated Planning

    Dear all,
    When reading the documentation on Integrated Planning ("New BI Capabilities..") I noticed the Allocate function is not mentioned.
    These functions are mentioned:
    Revaluation
    Reposting
    Formulas
    Currency translation
    Unit conversion
    Copy
    Distribute with reference data
    Distribute by keys
    Delete
    Is the Allocation function not available in Integrated Planning. Or is it now called "distribute by keys"? Would be confusing...
    Kind regards,
    Hans de Klein

    Dear all,
    the allocation function is part of the SEM installation and since SAP BW3.5 not part of planning itself. When installing the SEM, the allocation function is available in BPS but not in BI Integrated Planning.  
    From my perspective there two typical situations for allocation of e.g. costs from costcenter/costelement:
    1. The sender Costcenter/costelement is credited:
    In this case the standard distribution function (within one characteristic) would do the same.
    2. An other costcenter/costelement is credited:
    Here you would require a combination of a fox formula (to copy the sender to the 'other' combination and to reverse the sign) and as a second step the standard distribution function (within one characteristic, with the option of not crediting the sender).
    Best Regards, Olaf Fischer

  • Execution of a planning function for a row selection of a hierarchy node

    Hi all!
    Has anyone accomplished to make a configuration, where a planning function would have been executed for a hierarchy node selection and this selection would have been made by a row selection in an analysis item? I can filter the characteristic in a lowest level by selecting rows in analysis item, but if I would select a hierarchy node, the value for the characteristic is empty. I have set the selection state by binding the item_characteristic of analysis item to filter of the other characteristics.
    I tried first to reach this functionality by filtering the characteristic with variables in planning modeller filter and determining the values of the variables during runtime by the selection of the analysis item row selection. But I can not implement it as the display hierachy and the hierarchy node selection in the analysis item  are variables and modeller does not allow selection of a hierarchy node and hierarchy by variables - even thoug it let's you do it (I receive error message saying "field hienmflag with value 5 is not correct").
    Greatful for any working solutions tips you have made up!
    Sari

    Thanks for the explanation. I come from BPS background and there are few changes when it comes to planning functions in IP.  In BPS, the planning function is a bit loosely tied to Planning Package in a sense that a planning function can use any planning package under the planning level to which it belongs.  Same is the case in IP (technically), but in BPS the planning package contains all the characteristics and key figures of the planning level and hence the function can execute correctly.  What I see in IP is that planning function is very loosely tied to Filter.  It can use any filter under the aggregation level even though they differ in the characteristics and key figures.  I have tried a PF with different filters and it executes with everyone of them!  This doesnu2019t sound right!  Am I missing something here?
    Also, you can only execute a IP planning function if it is included in a planning sequence.  An extra step!  The modeling is so intuitive in BPS that IP is a bit repulsive.

  • Configuration Requirement for Integrated Planning in BI 7.0 with JAVA Addin

    Hi,
    We have BI 7.0 with Java Add-in installation newly migrated to Unicode.
    BW consultants (I am BASIS Consultant) want to use "Integrated Planning".  I already checked IMG link of it & JCO destinations mentioned there are not in J2EE engine.   Even I am not able to create b'cos current setup is not on SLD.
    I would really appreciate your help on below queries :
    1) Can I configure Integrated Planning without using SLD ?
    2) Do I need to install BI JAVA to running Integrated Planning ?
    3) Do I need to install EP & EP Core ?
    I already checked most of SDN thread but sorry couldn't able to get answer to above questions.   I have checked SAP Notes : 901022, 919850, 917950.
    Your early reply would be highly appreciated.
    Thanks & Regards,
    Narsing.

    Hi Balaji,
    Thanks for information.   One thing to update with JAVA/JAVA addin portal core components gets installed.   So I didn't installed EP.  
    Now Integrated Planner is working fine.
    Thanks for your help.
    Best Regards,
    Narsing.

  • @Hsp functions for Hyperion Planning

    Hi Gurus,
    Did any one find the documentation on @Hsp functions (like @HspAddPageCombination (),@HspConcat (),@HspCreateCDFSession ,@HspCreateEssbaseServerFile (),@HspDateToString (),@HspGetFileName ()) available in EAS for planning applications?

    I put port 11333 on server where is my workspace for planning install and I finally succeeded reverse engineering model for Hyperion planning.

Maybe you are looking for