Variable Screen not display in Web

Hi all
When i execute the Query ZBP02_Q001 in Web, the Variable Input Screen of the Query is not display first,but display the content of the ZBP02_Q001 directly in the Web. All of the Varibale is not mandatory;
i am using BI 7.0;
Anyone can give a help!
Thanks in advance.

Hi Cao,
May be your infoobject are holding constants, which led to direct execution without the selection screen.
Inorder to get the selection screen, select the infoobject and make its settings as optional and it will be displayed in your selection screen.
So whenever you use optional for an infoobject, that specific infoobject alone will appear on the selection screen.
Regards
Thenmuga Selvan

Similar Messages

WAD Variable screen not displaying when using a customer exit variable

Hello,
I have a query which has 3 variables, one of which is of type customer exit and gets populated with a default value.
When I run this query on the web from within BEX it works fine, however when I run it within any BI7 web template the variable screen does not pop up. Of course if I remove or change the offending customer exit variable the variable screen pops up.
I have switched the display variable check-box to on, and it still doesn't work.
Is this a 'feature' of BI7?
Many thanks
Sarah

Fixed it myself by tweaking the URL....
Added &VARIABLE_SCREEN=X to the end of the url and the variable screen now pops up. Its not an ideal solution but it works.
Anyone have any better ideas?

Variable Screen not displaying correctly

Our BW install is BI 7.0, with BEx still in the BI 3.5. We do not have any web-based reporting. We have deployed the SAP 7.20 GUI with front-end patch 4. One office is testing the installation with Win 7, Office 2010. When executing a workbook from BEx Browser it takes a long time for Excel to initialize and then when the variable screen does appear there are missing descriptions. A mouse over or a check of the variables will repaint that screen and populate the missing descriptions.
Has anyone experienced this issue? I have tried to recreate this issue, but I have not been successful. The installation has been redone several times and testing is consistent.
Thank you for your time.
Karen

Karen,
Thank you for your reply. The installation of the GUI was on a PC that was completely clean. Since this is in a test environment, the IT office had that luxury. They did a fresh install of MS Office and then the SAP GUI. We ran the installation check earlier today and are reviewing the results to determine why this particual install is not working.
Thanks!
Karen

Screen not displaying correctly. It keeps moving as the mouse moves

Screen not displaying correctly. It keeps moving as the mouse moves

Your problem is not the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
In order for us to give your problem our undivided attention to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac or iDevice you are using, what operating system, and what version of the application in question. Please remember to post in the forum relevant to your hardware or version of OS X.

Safari not displaying some web pages properly why?

I have been finding of late that safari does not display certain web pages properly. i.e.: text overlaps other text and is not formatted properly. This seems to have become more common lately. Even Apple's own apple info page does not display properly. Could this be a setting in safari that I have messed up somehow?

Go step by step and test.
1. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click the “Details” button.
    Remove all cookies except from Apple, your internet service provider and banks.
2. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.
3. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
4. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
5. Temporarily turn off Safari iCloud sync and test.
     System Preferences > iCloud
     Uncheck the box beside “Safari” and test.

HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

I have Mac 10.8.4 with Safari 6.0.5.
Safari is not displaying the web content but images on the web page are being displayed.
Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
When I open Preferences of Safari & click on Security tab, It Crashes!!
Thanks,
Shubhi

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Hierarchy Node Variable is not displaying full list of Hierarchy

Hi,
I loaded Hierarchy to an info object using flat file.
When i created a test reports and settings to display of MAster Data of Char and executed the report
The output displays full list of Hierarchy
Now to have a User Entry on Hierarchy ...created a Hierarchy Node variable and executed the value help of Hierarchy Node variable is not displaying fill list of Hierarchy ...its only displaying first 15 entries in Hierarchy.
I changed the settings of variable...etc but couldn't get the Hierarchy full list in User entry selection
How can i fix it...
Thanks in advance

If anyone has the same problem, I think I found the reason when transported to production.
BW7.3 (at least) can not show the hierarchy nodes if there is no transactional data loaded.
So do your hierarchies only after the data has been loaded..

My screen not display propely

i have problem wth my iPad2.the screen not display propely.pls help me

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Bex variable ready for input not displayed in webi

Hi,
I created bex query with some variables.
Variables are defined as "optional" but "ready for input". On productive system the prompts are all displayed, but when i transported the webi report to dev, some prompts are not displayed.
we are on BW 7.31 and BO 4.0. I also tried with BO 4.1. but the problem is the same.
I have no idea what's wrong here! Attached you can find some screenshots on my current settings.
thanks,
Katharina

Hi,
yes the reports are based on BICS and I moved them from prod to dev.
I already checked, the query panel does not show these variables!
I copied query and saved under new name, and i also created a new webi report upon this query, but some variables ready for input are still not displayed.
Regards,
Katharina

Variable screen not Populating

Hi,
We have Variable 'Order Admin' in the Query. in Developement and Quality Instance, On variable screen when you click on Variable its giving list of Order Admin but when we run same Query in production we are not getting list of Order Admin .
We have recently refreshed Quality, so almost same amount of data in Quality as production.
I have even checked the Query Properties and variable Properties and infocube in Quality and Production server . They are same.
Please suggest

Hi Lucky,
if you have checked the steps described you can take additional a look at this note:
FAQ: Input helps in Netweaver BI
SAP Note Number: [1080863|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
This note gives answers to frequently asked questions (FAQ) with regard to using the input help for characteristics in SAP NetWeaver BI. This includes the input helps in the BI BEx Java Web as well as the input helps in the BI BEx Tools.
To make sure that this is not caused by a program error check this notes on relevance:
F4 returns incorrect values
SAP Note Number: [1161224 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Input help does not display any values in variable screen
SAP Note Number: [1074803 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Regards
Andreas

Variable screen not popping up in BEx Analyzer

Experts,
I'm facing a wierd situation while executing queries in 3.5 BEx Analyzer. When the query is executed using 3.5 BEx Analyzer varibale screen does not pop and report strats running wide open. The Varible input is optional. But if the report in executed using Web (From the 3.5 Query Designer) variable screen pops up. This happens with the same user ID.
Please let me know if you have any ideas, could this be something realted to authorizations. In the meantime, i'm trying to change the varibale to mandatory and see if the variable screen pops up.
Thanks

Hello
The standard behavior is not show the variable screen if it has no mandatory variables. In the webtemplate you may have the parameter forcing to show the variable screen added in the code. It is something like "force variable screen". Please check if you can see that parameter.
regards
Lucimar

Variable Entries not displaying properly

Hi SDN Gurus,
We have loaded text file load into an ODS and have created a Query on the ODS. Have Built a variable on Account Number. The issue is this file has lots of negative Account Numbers along with Good Account numbers. But when we try to find the Good Numbers by selecting the Variable which is an Optional One, we are not able to find the Positive Account Numbers and only negative Account Numbers are being displayed in the Variable screen.
But when we do not give any Account number as selection, we get all the account numbers displayed in the Query Report.
Q1) How to Display all the account numbers (Both Positive and Negative) in the variable screen.
Q2) If we see the Variable screen, it shows only 72 Columns of Data in the Enterprise Portal Report, where as the file consits of More than that. How can we expand the 72 Columns to Full data display?
Regards
Vishwanath

Hi
First in the query designer...for the keyfigure account number right click and see ther properites..have u taken account number as charecteristics or key figures
If keyfigure rightclick and see the properties of the kf in the query designer there is option....+/-reverse signs........has it check marked...if so all your signs will be reversed in display in the report compared to the cube...
You want to expand..after executing the query in BEx you have the option expanding to the maximum level..you can right click on your Bex report to find where the option to expand to the maximum level
Regards
N Ganesh

Umlauts not displayed in WebI Rich Client

Hello everyone,
We have a problem with one user machine using Web Intelligence Rich Client 2-tier mode.
Data umlauts (õäöüšž) are turned to symbols and the query result are incorrect.
It's interesting, because metadata umlauts are displayed correctly. For example, the user sees umlauts header of reports.
The problem have to be in one machine, because when same user log in to another computer then umlauts are displayed correctly.
Environment details:
XI3.1 Edge Professional with DI
Build Number: 601
Product Version: 12.3.0.601
Data Source: DWH
Database Name: Oracle Database 11g Release 11.2.0.1.0 - 64bit ...
Auditing: Enabled
Client details:
Windows 7 32-bit
Oracle client 11g
Rich Client version 12.3.0
NLS_LANG = ESTONIAN_ESTONIA.BLT8MSWIN1257
Do anyone have experience with this kind of problem?
Thanks in advance,
Jana

Hi Jana,
normaly this type of problem happens when the NLS_LANG variable is not set or is incorrectly set.
have a look at this KBA https://service.sap.com/sap/support/notes/1260474
if you can't read it hte resolution is the following
Resolution
Ensure
that the Database is set to UTF8
NLS_LANG
to be set to UTF8 on the database server
If you are
importing the database from another server, make sure that the initial Database
is set to UTF8 too before doing the import/export.
Once this is done proceed as usual to set up Unicode for your
system >>>>Make sure a backup is done before making the
changes<<<<
Installed International Support features Microsoft Office Setup
Modify NLS_LANG on the client machine to be UTF8
(HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OracClient10G_home)
Ensure that Unicode parameter in oracle.prm and oracle.sbo files
are set to UTF8 (found in <install directory>\Business Objects\Business
Objects Enterprise 115\win32_x86\DataAccess\ConnectionServer\oracle)
Ensure Unicode parameter in cs.cfg file is set to UTF8 (found in
<install directory>\Business Objects\Business Objects Enterprise
115\win32_x86\DataAccess\ConnectionServer)
In Designer parameter make sure that UNICODE_STRING parameter is
set to Yes
Cheers
Simone

Layout formula not displayed in web

Hello all,
I have a layout for forecasting so depending on the version the planner chooses i will have either 39 or 66 or 9+3. since i am dynamically populating my layouts i am not able to assign Q1,Q2,Q3,Q4 totals so in the 3rd layout screen I am writing excel formula to acheive this. This looks fine in Planning folder, But the same is not acheived in Web, Is there any attribute which needs to be changed in web interface builder to achieve this or this is not possible in web. Any answer is appreciated.
Thanks for your time and help
sathya

Hi Marc,
I need more clarity on this becz i am also having the same problem.
I didn't understand your solution clearly. In my case I am not using any exit function to populate variables but I am using the two different variables , one for actual period and other for plan period. We are doing 12 months rolling forecast and we want to get quarterly totals for each quarter. Actual and plan data is differentiated by value type.
In your solution, if I have quarter which will have both actual and plan data, how should I get the total for that quarter?
What is best solution for getting the quarterly totals in my case.
Thanks,
Raj.

Variable Screen not display in Web

Similar Messages

Maybe you are looking for