Variable Screen of Web Template iView
Deployed Web Template iView to Portal. But when ever i click on the link of the web template iview in the navigation panel in portal. Variable screen comes up first which is mandatory. Is there some way in the web application designer that i fill up the mandatory variable screen with values through some ABAP table interface or by using text elements web item without letting variable selection screen show up initially in the portal.
I cant make those variable values default by going in BEx because those varaibles are global variables and getting used in many queries.
Any help will be appreciated.
Thanks
We've just implemented a NetWeaver 2004s system, and these hints may help you out:
1. In the Web Application Designer, there is a property on the web template which determines whether the variable screen is displayed or not. Therefore, you could uncheck that checkbox, and the variable selection screen won't be shown.
2. As to defaulting values in the selection screen ... we have used ABAP code to default values in variables. I think it was done in the start routine. The code we have implemented works, but then we present the variable selection screen to the user, so I can see that certain values (like date for example) are defaulted. I am not sure what happens if you default these values and then don't present the selection screen ... assume it would work for you though. Check on SDN and find out about pre-popup ABAP code for queries, I am sure you will be able to find something that helps you out.
Cheers,
Andrew
Similar Messages
-
Force Variable screen with Web Templates
We are on SP7 and have made the necessary settings based on note 950463, however the variable screen only pops up the first time you click the "New Analysis" button. If you click the button again, and select a query with optional variables, the variable screen does not show up. I've tried setting the default parameters in the IMG and in the portal iview to always pass the parameter VARIABLE_SCREEN=X along with making the necessary modifications to our default web template, but none of this has worked. Has anyone else come accross this?
Message was edited by: Ravi PatelHey,
Below is a version of the web analyzer I created with the following changes:
1. Variable screen will always open on subsequent calls to the "New Analysis" button, even for optional variables.
2. A button for refresh. This button basically calls the variable screen. If no variables exist, then this will just refresh, but if variables do exist, this launches the variable screen and then refreshes, similar to the refresh used within the 3.x Bex Analyzer...
3. A button for "Back to Start" which takes you to the inital state of the web application.
4. A button for "Back" which will take you back one navigation state. Hope this code helps!
Cheers,
Prakash
<bi:bisp xmlns:bi="http://xml.sap.com/2005/01/bi/wad/bisp" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns="http://www.w3.org/TR/REC-html40" xmlns:h="http://www.w3.org/TR/REC-html40">
<html>
<head>
<title>BI Web Application</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</meta>
</head>
<body>
<bi:data_provider name="DP_1" type="QUERY_VIEW_DATA_PROVIDER">
<bi:param name="INITIAL_STATE" type="CHOICE" value="QUERY">
<bi:param name="QUERY" value="">
</bi:param>
</bi:param>
</bi:data_provider>
<bi:item name="CONTEXT_MENU_ITEM_1" designheight="60" designwidth="80" type="CONTEXT_MENU_ITEM" xmlns:B="http://xml.sap.com/2005/01/bi/wad/bisp">
<bi:param name="MENU_DATAPROVIDER_PROPERTIES" value="">
</bi:param>
<bi:param name="MENU_PRINT" value="">
</bi:param>
<bi:param name="MENU_ITEM_PROPERTIES" value="">
</bi:param>
<bi:param name="MENU_EXCEPTIONS" value="">
</bi:param>
<bi:param name="MENU_CONDITIONS" value="">
</bi:param>
<bi:param name="MENU_VIEW_SAVE" value="X">
</bi:param>
</bi:item>
<bi:item name="TEMPLATE_PARAMETERS" type="TEMPLATE_PARAMETERS">
<bi:param name="CLEAR_VARIABLES" value="X">
</bi:param>
</bi:item>
<bi:item name="MESSAGES_LIST_ITEM_1" designheight="150" designwidth="400" type="MESSAGES_LIST_ITEM" xmlns:B="http://xml.sap.com/2005/01/bi/wad/bisp">
</bi:item>
<bi:item type="GROUP_ITEM" name="GROUP_ITEM_1" designheight="130" designwidth="800" xmlns:B="http://xml.sap.com/2005/01/bi/wad/bisp">
<bi:param name="CHILD_ITEM_REF" value="CONTENT_AREA">
</bi:param>
<bi:param name="WIDTH" value="800">
</bi:param>
<bi:param name="HEIGHT" value="130">
</bi:param>
<bi:param name="PADDING" value="">
</bi:param>
<bi:param name="GROUP_DESIGN" value="SAPCOLOR">
</bi:param>
<bi:param name="WITH_CAPTION" type="CHOICE" value="X" text="">
<bi:param name="CAPTION_TYPE" type="CHOICE" value="CHILD_ITEM_REF">
<bi:param name="CHILD_ITEM_REF" value="CONTAINER_TITLE">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="WITH_TOOLBAR" type="CHOICE" value="X" text="">
<bi:param name="CHILD_ITEM_REF" value="TOOLBAR_ALIGNMENT">
</bi:param>
</bi:param>
<bi:item type="CONTAINER_ITEM" name="CONTAINER_TITLE" designwidth="600" designheight="97">
<bi:param name="WIDTH" value="600">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<table cellspacing="0" border="0">
<tbody>
<tr>
<td style="WIDTH: 90%">
<bi:item name="QUERY_TITLE" designheight="48" designwidth="400" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="GENERIC_TEXT_BINDING">
<bi:param name="GENERIC_TEXT_BINDING" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1" text="DP_1">
</bi:param>
<bi:param name="GENERIC_TEXT_ELEMENT" value="QUERY_DESCRIPTION">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="TEXT_COLOR" value="DEFAULT">
</bi:param>
<bi:param name="TEXT_DESIGN" value="EMPHASIZED">
</bi:param>
</bi:item>
</td>
<td nowrap="nowrap">
<bi:item name="ACTUAL_DATE_TEXT" designheight="64" designwidth="311" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="TEXT_CONTENT">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="705">
</bi:text>
</bi:param>
</bi:param>
</bi:item>
</td>
<td nowrap="nowrap">
<bi:item name="ACTUAL_DATE" designheight="85" designwidth="400" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="GENERIC_TEXT_BINDING">
<bi:param name="GENERIC_TEXT_BINDING" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="GENERIC_TEXT_ELEMENT" value="ROLLUPTIME">
</bi:param>
</bi:param>
</bi:param>
</bi:item>
</td>
</tr>
</tbody>
</table>
</bi:item>
<bi:item type="CONTAINER_ITEM" name="TOOLBAR_ALIGNMENT" designheight="300" designwidth="600">
<table cellspacing="0" border="0">
<tbody>
<tr>
<td>
<bi:item type="CONTAINER_LAYOUT_ITEM" name="CONTAINER_LAYOUT_TOOLBAR" designheight="130" designwidth="652">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="ROW_LIST" type="ORDEREDLIST">
<bi:param name="ROW" type="ORDEREDLIST" index="1">
<bi:param name="COLUMN" type="COMPOSITE" index="1">
<bi:param name="CHILD_ITEM_REF" value="BUTTON_OPEN_SAVE">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="2">
<bi:param name="CHILD_ITEM_REF" value="QUERYVIEW_SELECTION">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="3">
<bi:param name="CHILD_ITEM_REF" value="TEXT_DISPLAY_AS">
</bi:param>
<bi:param name="VALIGN" value="CENTER">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="4">
<bi:param name="CHILD_ITEM_REF" value="DROPDOWN_DISPLAY">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="5">
<bi:param name="CHILD_ITEM_REF" value="BUTTON_TOOLBAR_2">
</bi:param>
</bi:param>
</bi:param>
</bi:param>
<bi:item name="QUERYVIEW_SELECTION" designheight="70" designwidth="200" type="DROPDOWN_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
<bi:param name="DATA_BINDING_TYPE" type="CHOICE" value="QUERY_VIEW_SELECTION">
<bi:param name="QUERY_VIEW_SELECTION" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="SPECIFIC_LIST_OF_QUERY_VIEWS" type="CHOICE" value="">
</bi:param>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="DROPDOWN_DISPLAY" designheight="130" designwidth="400" type="DROPDOWN_ITEM">
<bi:param name="DATA_BINDING_TYPE" type="CHOICE" value="STATIC_OPTION_LIST">
<bi:param name="STATIC_OPTION_LIST" type="ORDEREDLIST">
<bi:param name="STATIC_OPTION" type="COMPOSITE" index="1">
<bi:param name="SELECTION_TEXT">
<bi:text program="SAPLRRSV" key="622">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="ANALYSIS_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="CHART_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="CHART">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="STATIC_OPTION" type="COMPOSITE" index="2">
<bi:param name="SELECTION_TEXT">
<bi:text program="SAPLRRSV" key="626">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="ANALYSIS_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="CHART_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="CHART">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="STATIC_OPTION" type="COMPOSITE" index="3">
<bi:param name="SELECTION_TEXT">
<bi:text program="SAPLRRSV" key="750">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="ANALYSIS_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="CHART_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="CHART">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="TEXT_DISPLAY_AS" designheight="130" designwidth="400" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="TEXT_CONTENT">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="746">
</bi:text>
</bi:param>
</bi:param>
<bi:param name="TEXT_DESIGN" value="EMPHASIZED">
</bi:param>
<bi:param name="TEXT_WRAPPING" value="">
</bi:param>
</bi:item>
<bi:item name="BUTTON_OPEN_SAVE" designheight="130" designwidth="400" type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST" type="ORDEREDLIST">
<bi:param name="BUTTON" type="COMPOSITE" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="236">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="759">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="LOAD">
<bi:param name="TARGET_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="OPEN_SAVE_DIALOG_LAYOUT" value="TEMPLATE_PERSISTENCY">
</bi:param>
<bi:param name="DISPLAY_SINGLE_FILTER_ENTRY" value="">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST">
<bi:param name="BUTTON" index="2">
<bi:param name="ENABLED" path="PAGE?PAGE/VARIABLE_CONTAINER/HAS_INPUT_VARIABLES/@value">
</bi:param>
</bi:param>
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="4">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="049">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="760">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SAVE_AS">
<bi:param name="TARGET_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="OPEN_SAVE_DIALOG_LAYOUT" value="TEMPLATE_PERSISTENCY">
</bi:param>
<bi:param name="DISPLAY_SINGLE_FILTER_ENTRY" value="">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="757">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="758">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="LOAD">
<bi:param name="TARGET_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="OPEN_SAVE_DIALOG_LAYOUT" value="DATAPROVIDER_PERSISTENCY">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST">
<bi:param name="BUTTON" index="2">
<bi:param name="ENABLED" path="PAGE?PAGE/VARIABLE_CONTAINER/HAS_INPUT_VARIABLES/@value">
</bi:param>
</bi:param>
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:command>
<bi:command type="SET_VARIABLES_STATE">
<bi:param name="VARIABLE_SCREEN" value="X">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="5">
<bi:param name="CAPTION" value="Refresh">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_VARIABLE_DIALOG">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="6">
<bi:param name="CAPTION" value="Back to Start">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="BACK_TO_INITIAL_STATE">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="7">
<bi:param name="CAPTION" value="Back">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="BACK_TO_PREVIOUS_STATE">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="BUTTON_TOOLBAR_2" designheight="130" designwidth="400" type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST" type="ORDEREDLIST">
<bi:param name="BUTTON" type="COMPOSITE" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="702">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="702">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_TEMPLATE_DIALOG">
<bi:param name="TEMPLATE" value="0ANALYSIS_PATTERN_INFO" text="Analysis Pattern: Information">
</bi:param>
<bi:param name="WIDTH" value="800">
</bi:param>
<bi:param name="HEIGHT" value="620">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="747">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="747">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="LAUNCH_BROADCASTER">
<bi:param name="START_WIZARD" type="CHOICE" value="X" text="">
<bi:param name="DISTRIBUTION_TYPE" value="MAIL">
</bi:param>
</bi:param>
<bi:param name="START_OBJECT_TYPE" value="QUERY_VIEW_DATA_PROVIDER_REF">
<bi:param name="QUERY_VIEW_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="3">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="748">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="748">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="EXPORT">
<bi:param name="TEMPLATE" value="0ANALYSIS_PATTERN_EXPORT" text="Analysis Pattern Export">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="4">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="710">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="710">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="EXPORT">
<bi:param name="EXPORT_FORMAT" value="XLS">
</bi:param>
<bi:param name="ITEM_REF_LIST">
<bi:param name="ITEM_REF" index="1" value="CHART">
</bi:param>
<bi:param name="ITEM_REF" index="2" value="ANALYSIS">
</bi:param>
<bi:param name="ITEM_REF" index="3" value="EXCEPTIONS">
</bi:param>
<bi:param name="ITEM_REF" index="4" value="QUERY_TITLE">
</bi:param>
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="5">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="709">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_DIALOG_DLG_DOC_BROWSER">
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="DOCUMENT_CLASS_SPECIFIC" type="CHOICE" value="DATA_CONTEXT">
<bi:param name="DATA_CONTEXT" type="COMPOSITE">
<bi:param name="DATA_ROW" value="-1">
</bi:param>
<bi:param name="DATA_COLUMN" value="-1">
</bi:param>
</bi:param>
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
</bi:param>
</bi:item>
</bi:item>
</td>
<td style="WIDTH: 80%">
</td>
<td>
<bi:item type="CONTAINER_LAYOUT_ITEM" name="TOOLBAR_RIGHT_AREA" designheight="130" designwidth="652">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="ROW_LIST" type="ORDEREDLIST">
<bi:param name="ROW" type="ORDEREDLIST" index="1">
<bi:param name="COLUMN" type="COMPOSITE" index="1">
<bi:param name="CHILD_ITEM_REF" value="LINK_FILTER">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="2">
<bi:param name="CHILD_ITEM_REF" value="LINK_SETTINGS">
</bi:param>
</bi:param>
</bi:param>
</bi:param>
<bi:item name="LINK_FILTER" designheight="130" designwidth="400" type="LINK_ITEM">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="632">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="632">
</bi:text>
</bi:param>
<bi:param name="INTERACTION_ALLOWED" value="X">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_GROUP_AREA">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="SETTINGS_GROUP_AREA">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST">
<bi:param name="BUTTON" index="2">
<bi:param name="ENABLED" path="PAGE?PAGE/VARIABLE_CONTAINER/HAS_INPUT_VARIABLES/@value">
</bi:param>
</bi:param>
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="LINK_SETTINGS" designheight="130" designwidth="400" type="LINK_ITEM">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="749">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="749">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="SETTINGS_GROUP_AREA">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_GROUP_AREA">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:item>
</bi:item>
</td>
</tr>
</tbody>
</table>
</bi:item>
<bi:item type="CONTAINER_ITEM" name="CONTENT_AREA" designheight="220" designwidth="668">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:item type="GROUP_ITEM" name="FILTER_GROUP_AREA" designheight="300" designwidth="600">
<bi:param name="CHILD_ITEM_REF" value="FILTER_AREA">
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
<bi:param name="WITH_CAPTION" value="">
</bi:param>
<bi:item type="CONTAINER_LAYOUT_ITEM" name="FILTER_AREA" designheight="220" designwidth="668">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="ROW_LIST">
<bi:param name="ROW" index="1">
<bi:param name="COLUMN" index="1">
<bi:param name="CHILD_ITEM_REF" value="FILTER_EXPL">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="ROW" index="2">
<bi:param name="COLUMN" index="1">
<bi:param name="CHILD_ITEM_REF" value="FILTER_PANE">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="ROW" index="3">
<bi:param name="COLUMN" index="1">
<bi:param name="CHILD_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:param>
</bi:param>
</bi:param>
<bi:item name="FILTER_EXPL" designheight="64" designwidth="311" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="TEXT_CONTENT">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="754">
</bi:text>
</bi:param>
</bi:param>
<bi:param name="TEXT_COLOR" value="DIMINISHED">
</bi:param>
</bi:item>
<bi:item name="FILTER_PANE" designheight="50" designwidth="442" type="FILTER_PANE_ITEM">
<bi:param name="COLUMNS" value="3">
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="HEIGHT" value="50">
</bi:param>
<bi:param name="AUTOMATIC_APPLY" value="">
</bi:param>
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:item>
<bi:item name="FILTER_CLOSE_BUTTON" designheight="20" designwidth="442" type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST" type="ORDEREDLIST">
<bi:param name="BUTTON" type="COMPOSITE" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="732">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_GROUP_AREA">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="707">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_VARIABLE_DIALOG">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:item>
</bi:item>
</bi:item>
<bi:item type="GROUP_ITEM" name="SETTINGS_GROUP_AREA" designheight="300" designwidth="600">
<bi:param name="CHILD_ITEM_REF" value="SETTINGS_AREA">
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
<bi:param name="WITH_CAPTION" value="">
</bi:param>
<bi:item type="CONTAINER_ITEM" name="SETTINGS_AREA" designwidth="600" designheight="600">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:item type="TABSTRIP_CONTAINER_ITEM" name="SETTINGS_TAB" designwidth="596" designheight="200">
<bi:param name="TABPANEL_LIST">
<bi:param name="TABPANEL" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="281">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="EXCEPTIONS">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="282">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="CONDITIONS">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="3">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="753">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="PROPERTIES_DP">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="4">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="622">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="PROPERTIES_ANALYSIS">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="5">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="626">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="PROPERTIES_CHART">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="HEIGHT" value="200">
</bi:param>
<bi:param name="INITIAL_TAB" value="3">
</bi:param>
<bi:item name="EXCEPTIONS" designwidth="300" designheight="120" type="EXCEPTIONS_LIST_ITEM">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:item>
<bi:item name="CONDITIONS" designwidth="300" designheight="120" type="CONDITIONS_LIST_ITEM">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:item>
<bi:item name="PROPERTIES_DP" designwidth="400" designheight="150" type="PROPERTIES_PANE_ITEM">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="PROPERTIES_SOURCE" type="CHOICE" value="DATAPROVIDER_PROPERTIES">
<bi:param name="DATAPROVIDER_PROPERTIES" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="PROPERTIES_SET" type="CHOICE" val -
How to hide some variables on variables screen in web report (in WAD)
I need to hide some optional variables (not all of them) on variables screen in web template.
Hiding the whole selection screen is not an option, since users have to populate other variables and some variables are mandatory.
Web template is based on a query that can be run in BEx Analyzer by superusers - and there they need all variables. I want to use the same query both in BEx Analyzer for superusers and on the Portal for regular users. For portal version though I need to hide some of the variables on the selection screen. Is it possible at all?
I would like to avoid creating two separate queries - one for Analyzer and one for Portal.if the variables are optional and mandatory both avaialble
then there is no chance that u can hide them
the only option is to create a save as QUERY and remove those variable.
it is not possible to just hide the variable screen...
if u hv used they will be displayed....
if u dont want it dont use it...
and if really using another query is not advisable as u said
the only thing i can say is that... try to interact with ur security person
ask him u need to create several authorization objects for several variables
if that is possible
let him create those
assign those specific authorization object to specific user id
use it for specific variables u need
tat way super users with specaial authorization can acess the same query and can see specific variables
regular users withouts authorization of variables can see rest of variables. -
Variable in adhoc web template
Dear Experts,
In my adhoc web template, I included a dummy query which has a text variable.
Upon executing the web template this variable is prompted correctly in selection screen.
But, when I execute a query from query designer (the query will be automatically embedded to this adhoc web template when publish to web),
only variable from the query is prompted,
and NOT the text variable which I have in adhoc web template.
Is there any way to have this text variable from adhoc web template even when I execute query from query designer?
Thanks,
Sari.Yes thanks.
I have put the variable in the query designer and it works fine.
Cheers,
Sari. -
Variable selction in Web Template
Hi All,
I have one web template in that there are three queries but when I insert one more query
The variable screen showing duplicate values. All setting related to variable display in web template is correct. Can any one give me solution how to avoid these duplicate variable values after executing the report?
Your response would be appertained
Thanks in Advance.
NitinHi Nikhil,
Try to use only one variable for all the queries.
And also please check in the queries for the characteristics (which you said of Duplicate values):
in the query properties in the advanced tab-->"Filter Value Selection During Query Execution"
the options you have mentioned for this? and also Is the option same in all queries for that characteristic.
Please check and let me know.
Regards,
Ravi Kanth -
Which Role to execute a BEX Web Template iView
Hi All,
I have created a BEX Web Template iView. However, my test user does not have permission to see the the web template (error message is something like "User is missing credentials for system alias SAP_BW").
Does anybody know which role my user needs to merely show the web template?
Thanks, JohannesJohannes,
For the system object, SAP_BW, open the permissions and add a everyone group and ensure you have the enduser checked & you should be good to go.
Cheers!
Sandeep Tudumu
Edited by: Sandeep Tudumu on Feb 2, 2010 4:07 PM -
Variable Personalization for Web Templates
Hi,
Does anyone know of a method to personalize variable values for <b>individual</b> web templates. When I personalize a variable value while running the query on web, its value gets modified for all queries, not just the specific one that I am running.
This does not happen when I run the queries in BEx. Here I have the option of personalizing the variable values specific to the query that I am running (by using the icon at the bottom of the variable screen), or to personalize the variable value across all queries (by using the icon displayed with the individual variable).
Can anyone help me in achieving the same two options for queries run on web? I want to personalize variable values for individual queries.
Thanks
-ArifHi Arun
Thanks for your input, but the bookmarks or parameter passing will not give enough flexibility to the users.
For example:
Out of 10 available variables in the query, the user should have an option of selecting values for those that have not been personalized (say 7 variables) while the rest 3 get populated automatically because they have been personalized. In EACH run of the query, the user will have the flexibility to select a different value for the 7 variables.
This needs to be different for each query the user runs, even though the queries may use same variables as the other.
I am trying out some options. If it works, I shall let you know.
Regards
-Arif -
Default variable values in Web Template
http://-----xx.com:8120/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=QZSC_O01_5001_TEST&var_name_1=0S_PLANT&var_value_ext_1=6011&VARIABLE_SCREEN=X
While using the above variable my expectation is it shall display variable screen and for plant (0s_plant) variable it shall show default value as 6011 while other variable shall remain blank.
But while executing it is not showing plant default value in variable screen. Any suggestions.
Many Thanks
VikashHi Vikas,
While defining the Query, you can define the default value for the variable. And this Query can be assigned to the Analysis Item in the Web Template. If the "Display Variable" option is set to "On", then, whenever the Template is executed, the default value set in the Variable will be visible.
Hope this answers your question.
regards,
prem. -
Skipping of the variable screen in Web report
Hi,
I have created my queries in Bex. When I run the reports from my favorites in the SAP GUI, the reports are displayed directly without bringing up the variable screen in the web browser.
Currently on BI7. Any ideas how to fix the issue.
Thanks
DemetriusQueries in Web are run using the default web template (which is generally 0analysis_pattern) - you can check the default WT for your system in tcode SPRO. In the properties of the web template, you have an option 'Display Variable Screen' - you can turn it on. As such, I think your query has no 'mandatory' variables, otherwise the var entry screen should have appeared.
You might want to search for some threads on 0analysis_pattern to get some more info about it. -
Variable Screen in Web Application Designer (disappers after execute click)
Hi,
I have a Bex query in WAD, one of the variables is set to mandatory in Bex Query. i have also checked the "Force Variable Screen Display" option in web template. Initially when i call this Web template URL the varible screen is displayed and if i do not enter any value for the mandatory variable i get an error message till here everything works fine.
But when i provide the variable values and click on execute the variable screen disappears and never comes back again, how can fix this variable screen, so that it should be always visible even if i navigate between pages. I have WAD 3.5.
Thanks
Akila.RWhat does that mean. could you please give me more details on the same or any links that is helpful.
Thanks
Akila.R -
How to disply the value of variable in the Web template
Imagine I have a query TOP-N customers. I want to diplay N value in the web template. I used web item for this purpose in NW2004. Which item should I use for the same purpose in NW2004s?
ThanksDoes anyone have another suggestion? The information field does not render pretty. I am trying to do this via an HTML path edit and a text box. The view source looks like this for a variable
<BICS_VIEW>
<VARIABLES>
<VARIABLE name="RDSHW_PCY_YOVERY" type="DOUBLE" text="% Goal Year over Year" value="10.0"/>
</VARIABLES>
I tried various versions of the path=... but cannot get it to work. Anyone got an idea ???
I tried
path="DATA_PROVIDER:DP_1?/BICS_VIEW/VARIABLES/VARIABLE/@value" /> -
Displaying variable values in Web Template
Hi,
I am working on a Web Template.
I want to display the variables and their values input by the user on the Web Template.
Which Web Item function shd I use?
How shd I use it?
Pls guide me.
Thank you,
AdarshHi Adarsha.
You can add the standard web item called "Text Elements". When you have added it just insert the dataprovider you want the filter values displayed for.
Hope it helps.
BR
Stefan -
Hi Guys,
If anyone can tell me in detail what is the difference if publish BEx Web Application iView as iView then publish BEx Web Application iView as URL iView.
Thanks
ChinD Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us. -
Retain variable values across web templates during a web session
Hi all,
How can we let web template get variable values from another template's variable values so as to keep the same entry values as previous report run?
For example 0vendor has a variable (for single, mandory) used in all vendor related web templates. "vendor1" was entered for the second template.
I tried to use "SET/GET PARAMETER" in variable user exit. It works in BI with RSRT, but it doesn't work with Bex or Web template. Looks like web session is not sync with the ABAP stack.
How about using cookie? How to create/reset cookie in variable user exit? Can we get variable values from web server memory or user session data?
Please share your thought !
Thanks for helping!
DavidHi Arun,
All the web templates are randomly run by user, there are no set of templates run after one template. Any templates can run after any other web template.
Basically we link web templates with portal menu items. any report can be run by any sequence. The thing the new report need to take the previous selection values from common variables. -
Dear all,
I have a small BEx question. In my report, I restrict by using variable ZCREATOR which contains business partner number. Heres the problem, in my variable screen, even though I set the display TEXT or LONG TEXT it only shows me description of the short text. E.g if fullname is JOHN DOW, it only shows DOW
But once the report is generated out, LONG TEXT will of cause show JOHN DOW whereas if SHORT TEXT will just show DOW.
Answer I need would be, how can I set in my variable screen to show JOHN DOW instead of DOW?<FONT FACE = "Tahoma", Font Color = "Blue">
Hi<br>
Go to the InfoObject definition and check details in the tab Business Explorer. General Settings --> Display and BEx Description, are they both selected as Long Texts?
<br><br>
Hope it helps.<br><br>
Cheers Abhijit<br>
</FONT><FONT FACE = "Verdana", Font Color = "Red">
Removed
</FONT>
Maybe you are looking for
-
HT4623 itunes wont work after i got the newest one
i updated to the newest itunes for my ipad with all software updates and the itunes wont load said missing files and says to reinstall so i did it and it is doing the same thing
-
Master details form: in the details form the List of values is not working
The master details have an upper form and a lower form OK So, the List of values of values in the upper is working fine, the lower form or the details form the list of values not working on it and the code is right, and mean not working like when you
-
hi, i had amde dis code for displaying the changes made on material in purticular month,70% report is working fine but problem is dat when i want to see the deatils of changes made to it ,it is not displaying all records,i.e. if dere are 5 changes ma
-
Need Information on C$SYNC_HIS_PUB_ITEMS table.
Hi, I would really appreciate if anyone can share any information on C$SYNC_HIS_PUB_ITEMS table. 1) What kind of information is stored in C$SYNC_HIS_PUB_ITEMS table. 2)Is there any underlying API that uses this table ? 3)Is there any way to Purge the
-
Canon ir2525 not supported by mavericks?
After I updated my Macbook Air to 10.9 Mavericks the driver for Canon ir2525 no longer works. I get error message saying "Printer is not supported". I know printer still works because a Mini running 10.6.8 still prints ok to the Canon, and both comp