Variable Selection Screen Issue in WAD

Hi Guru's,
I have created a Query in 3.5 and having Variables for the same as Acutal Good's Issued Date & Plant. I am able to see the variable screen with selection option(Intervals) in Query level. But I am not able to see the Variable selection option as interval in Portal (WAD). The variable is showing only as single value.
Please suggest to get the variable selection screen as interval's.
Regards,
Bandi

Hi,
I got your point.When you open that query in Analyzer,it shows the variable screen and the variable is shown as a interval variable.But if you open the same query in Web Analyzer,the variable shown as single value variable.
This looks little weird because both Web and BEx Analyzer uses the same Query.Can you execute the query in RSRT Tcode and check how the variable shown(whether as a Single or interval variable).
And also check the variable definition.Try to create a new variable with the same settings and check the behavior.
Rgds,
Murali

Similar Messages

BW-BPS Variable Selection Screen Issue

We currently use BW-BPS as our planning tool with the web-based interface. One of our planning web screens includes a cost center variable with the user selection configured as Input Field with Input Help. This allows the user to select the cost center using search parameters in a pop-up screen. I recently created a new web interface by copying the existing one and making minor changes. After generating it, the new interface works as planned, however the data in the cost center search pop-up box is garbled.
Since the original screen works fine, I theorized that the act of generating the interface caused the issue. I confirmed this by generating the original web screen without making any changes and it saw that it also has garbled pop-up search data. I then changed the setting from Input Field with Input Help to Dropdown Box and re-generated. This worked normally therefore the issue seems to specific to generating the Input Field with Input Help settings.
Are there any notes out there to correct this generation issue? We are currently on the following:
SAP_BASIS - 700 - 0025
SAP_ABA - 700 - 0025
PI_BASIS - 2006_1_700 - 0015
ST-PI - 2008_1_700 - 0004
SAP_BW - 700 - 0027
FINBASIS - 600 - 0020
SEM-BW - 600 - 0020
BI_CONT - 703 - 0016

Hi,
I got your point.When you open that query in Analyzer,it shows the variable screen and the variable is shown as a interval variable.But if you open the same query in Web Analyzer,the variable shown as single value variable.
This looks little weird because both Web and BEx Analyzer uses the same Query.Can you execute the query in RSRT Tcode and check how the variable shown(whether as a Single or interval variable).
And also check the variable definition.Try to create a new variable with the same settings and check the behavior.
Rgds,
Murali

Bex variable selection screen issue

Dear All,
I have three variables in my Bex report -- Submission date, User ID and Company Code. The variable -- 'Submission date' is of type 'Replacement Path'. Other two are User entry.
When I run the report, only the 'User ID' and 'Company code' variables are displayed. After I supply the values to these, 'Submision date' screen pops up. But I require that all the three variables on a single scren at a time.
Thanks,
Srinivas

Hi.....
O.k. I agree with you. But when I execute the report in Web(or in Portal), then in that case all the variables are displayed in the same screen. How is this possible ?
Thanks,
Srinivas

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

Need to skip the variable selection screen when using dropdown

Hello Friends,
I have created a web template having a dropdown, a table and a text element. Basically I am trying to follow the guide "How to Use a Dropdown Box to Set Variable Values". It shows how to select values for a variable using dropdown.
NOTE: The guide can be found here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
What is happening is when I select a value for the variable in the dropdown, the correct url is getting formed but instead of displaying the report using the selected value, the variable selection screen appears. Given below is the url that gets formed:
http://abcdev.wdf.sap-ag.de:8000/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=3&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&VAR_NAME_1=TSTPEROD&VAR_VALUE_EXT_1=04.2007
Please assist me to get rid of the variable selection screen. Thanks!
Regards,
Prem.

Hello Ray,
Thanks for your reply. This has partially resovled the issue. I have awarded you points for that. Now I am able to skip the variable screen.
However, the query results are not getting refreshed. I wanted to restirct the values based on the value given in the variable selection (In my case the dropdown box). Somehow I am not able to link the dropdown with the variable or the "SAPBWOpenURL(url);" function is having some issues.
Please assist. Thanks!
Regards,
Prem.

Caption in the Variable Selection Screen

Hi,
I have my queries in web templates on WAD. I want to attach a description for each report which shows on the top of the selection screen, how can I do it. For example i have a P&L monthly report with the selection screen include a selection for Fiscal Period and GL Account, I want to have the caption :
"P&L Monthly". How can I achieve this
Thanks
Rashmi.

Hi,
I have tried it but it is showing the caption once i enter the variables and get into the web template. I want it to show on the variable selection screen as well. How can i do it
Thanks
Rashmi.

Text info in the variable selection screen

Hello
I want to show some text info together with variable selection screen. Is it possible in WAD ? How to do it?
Help please.
Thanks.

Rani,
Basically its not suggestable by SAP that to modify the variable screen, since that has been directly delivered by SAP Object... If you still wants to modify the variable screen then your F4 will not work ijn the variable screen... Usually dont go and modify your variable screen..
Rgds,
Gattu

Edit variable selection screen

Hi,
I want to edit the variable selection screen in WAD 7.0 (change width of colums).
Can anyone give me the template-name?
Michel

As quoted from http://sapfans.com/forums/viewtopic.php?f=16&t=221261
saw this thread on SDN: SAP Business Explorer (SAP BEx)
Question:
Hi,
Most of our BW reports use one Web Template. When the variable screen pops up, the header shows "Variables for Ad Hoc Report" instead of the name of the report that were are executing from the role folder.
Does anybody know how can I get the title of the report to show instead of "Variables for Ad Hoc Report"?
Thanks for your help!
Helena
Answer from SAP Employee Heike Guder:
Hi Helena,
sorry, but this is only possible with modification in class cl_rsr_www_variable_screen method FILL_OPEN_FORM(no customizing for this)
Heike
If you are really into it you might want to start diggin in that class and if do - please let us know the result of it.
Cheers,
Skibum

How to include text lable in Variable selection screen (Web Reporting)

Hi Experts,
I have created one query and in Web Report-->variable selection screen I have one Date field for that field I have to display a label stating that user to input date in the format YYYY.MM(like a text label).Actually I have created 10 to 12 report . I need u r suggestion such that a single change will reflect my requirement in all the reports and I have created all the reports for same multiprovider.
Thanks in Advance
Yours,
Bala

Bala,
Prompts can originate from one of two places: either via Designer and using the @prompt functionality or while creating the report building a prompt in the Query Filters panel. If the prompt was built using the @prompt method, and all 10-12 reports are using that particular @prompt, then one change via Designer will cause all reports to reflect the new verbiage. If you built the 10-12 reports using the prompt in the second scenario, then each individual report needs to be opened, modified and then saved. If you must use the latter method, then you can open the first report, modify the prompt verbiage, then highlight the new verbiage with your mouse and hit Control-C (which copies that text to the Clipboard of your Windows system). Then go to the second report, locate the verbiage that needs to be changed, delete it, then Control-V (which pastes), and voila, some keyboarding strokes are saved....
Thanks,
John

Limit list of values in variable selection screen

Hi
Apologies if this has been asked / answered elsewhere, but I thought I would put it out there, at least while I continue trying to find a solution.
We have a requirement to limit the data from which a user is allowed to select values in the variable selection screen. I know how to write the ABAP code that will return the list of data from which the user can choose, but not sure how to implement that in the query variable.
Essentially, the BEx query needs an input on username, and the current user should be able to choose from a list of usernames. That list of usernames should only be usernames to which the current user has access.
Don't worry about the linking of current user to user names, that is taken care of in our DSO.
What I am after, is limiting the data that comes back when the "F4 Help" type button is pressed on the variable screen.
I can default a value in the customer exit variable using ABAP code in the i_step = 1 loop, but that doesn't seem to effect the list of data available for selection.
Any decent ideas?
Cheers,
Andrew

Hi Andrew,
As charlie suggested go for Analysis authorization that is the simplest approach to restrict values for any object, in another way you can use following BADI for value restriction using ABAP code, refer the below link.
[http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-BW_BADI_F4]
By using customer exit you can only populate default values but you will not be able to restrict F4 help values.
Regards,
Durgesh.

Filter value for variable selection screen

Hi & help !,
This could be a tricky or an easy question, but it seems too hard for me !
I'm storing version in my cube, and have a report which shows informations for the version you select (with a variable = ZVERSION01).
ex : Version :
V01
V02
V03
V04
When report is executed i have my variable selection screen (for variable ZVERSION01) which give all version [V01 -> V04]. But i want users have no access to version V01 & V02.
Variable ZVERSION01 is "single selection", i tried to filter with Default Values screen or Characteristic Restriction screen but it doesn't work.
ex : caracterisitic restriction screen : VERSION = !V01 / !V02
default value screen : variable VERSION = ZVERSION01
Any idea?
Thx

Hi,
In BI 7.0 there is Anaylysis authorisation RSECADMIN transaction. That you can use here or normal role concept will also do.
What you need to do is grant authorisation to the users for V03 and 04 version only and create 'Authorisation' type variable on version in the query. (type of variable - it asks while creating the variable). This way users will only be able to see authorised versions only.
Note you have to make version infoobject as Authorisation relevent infoobject. ( in infoobject properties).
Let me knw if you have any doubt.
Regards,
Viren

How to use Keyfigures in the Bex variable selection screen.

Hi,
I have a scenario, where the user whats to see the keyfigures like volume, amount in the variable selection screen, so that he can dynamically, set the condition according to his requirement.
For example , he wants to see all the PO's for a particular calmonth which have volume > 1 Million or on someother day, he may input the value as volume > 2Million or Volume < 0 , so it depends. Similarly he wants to dynamically select the Amount values.
I have tried using condition with "greater than"and value as a formula variable and it works for one condition, but if I add another condition i.e, "less than"and value as a formula variable then it conflicts and the query is throughing below error.
"ERROR BRAIN (418): Variable ZCS_VAR_CH_KG_LT (DC015DZ850NUYVFDMPJHRGHXW) does not exist or is incorrectly used 4 Volume"."".
Do we have a option to use customer exit in such a scenario ??, any suggestions please.

Hi,
Please check out the below link.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e&overridelayout=true
Hope it suffice your requirement.
Regards,
AL

Variable selection screen

Hi,
I have 2 currency varaibles in my variable selection screen. Now i want to remove one. I can't find these variables in query deffination.
Can you tell me how should i remove the currency conversion variables from the web template selection screen. where in query defination can I find it.. or i have to do it some other way..
Thanks and Regrds
ravi

Hi Ravi,
if you just want to remove a variable its simple.
1.Go to the query designer.In the query designer selecting the appropriate info object its attached to it.
2. Right click and select the context menu -> restrict
3. IN the pop up window de select the variable you want to remove.
If it doesn't solve your problem post with more details abt your req.
Cheers,
Mathivanan

How to run the variable exit without calling the variable selection screen?

Hi all
I have a query with 2 variables 0P_PRQUA (Previous Calendar Quarter (SAP Exit)) and ZCCDAT02.
ZCCDAT02 is a Key Date variable that is derived based on the last day of the quarter that is entered in 0P_PRQUA. The exit code works correctly when calling up the variable screen and ZCCDAT02 is derived properly.
The problem is that 0P_PRQUA is set to "Can be changed in query navigation". So if the user changes the value of the quarter the exit is not triggered and the value of ZCCDAT02 does not change.
Is it possible to trigger the exit or is there another way to do it? Ideas would be appreciated. I am trying to create a Web Template with a Dropbox box for the Quarter.
Query is written in BW 3.X.
Regards
Chami

Hi guys
Just to restate the requirement. I want the user to be able to change the value of the variable, WITHOUT calling the variable selection screen.
I want the user to be able to change the value of the quarter by using a dropdown box from within the web template. Once that is selected I want the value of ZCCDAT02 to be derived from the new value of the quarter.
Regards
Chami

Enabling Key and text for the Variable Selection screen

I need to display key and text for a characteristic when selecting the drop down menu in the variable selection screen of a web report. In the Business Explorer tab within the info-object, I changed the General Settings to display Key and text, but when I open the drop down menu for this characteristic, it is still displaying the key only. Is there some other place where this change needs to happen?

Hi,
Did you try to log out and log in again into BEx?
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Variable Selection Screen Issue in WAD

Similar Messages

Maybe you are looking for